Which group on the periodic table contains chemical elements that are shiny and conduct electricity?
A.
Metalloids
B.
Nonmetals
C.
Representative elements
D.
Metals
ChemBonding9. In ammonium chloride NH4Cl, the bonding between NH4+ and chloride ion Cl− is _______.
options:
ionic
polar covalent
nonpolar covalent
Increasing the concentration increases the speed of reaction by... increasing the number of collisions between products increasing the amount of energy in the system increasing the number of collisions between reactants lowering the activation energy of the reaction
Answer: increasing the number of collisions between reactants
Explanation:
A reaction is possible due to collisions between the reactants to create products. If we increase the concentration of reactants then that means that we are increasing the molecules of the reactants which would give them more chances to collide and make products.
For instance, using a non-chemistry example, if there are few cars in a large city, the accidents there will be less because the cars will have such space that they wouldn't collide with each other. If the number of cars in the city is increased however, there is now less space and more chances for cars to collide.
According to the kinetic-molecular theory, the average kinetic energy of gas particles depends on which factor?
Answer:
Temperature.
Explanation:
Kinetic molecular theory of gases states that gas particles exhibit a perfectly elastic collision and are constantly in motion.
According to the kinetic-molecular theory, the average kinetic energy of gas particles depends on temperature.
This ultimately implies that, the average kinetic energy of gas particles is directly proportional to the absolute temperature of an ideal gas. Thus, an increase in the average kinetic energy of gas particles would cause an increase in the absolute temperature of an ideal gas.
Temperature can be defined as a measure of the degree of coldness or hotness of a physical object. It is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).
The osmotic pressure of a solution formed by dissolving 0.231 g of the protein in 150 mL of water at 298 K is found to be 2.054 torr.
Answer:
13924g/mol is the molar mass of the protein
Explanation:
What is the molar mass of the protein.
The osmotic pressure of a solution, π, is defined as:
π = c*R*T
Where π is osmotic pressure = 2.054torr* (1atm/760torr) = 2.70x10⁻³atm
c is molar concentration of the protein,
R is gas constant = 0.082atmL/molK
And T is absolute temperature = 298K
Solving the molar concentration:
c = π / RT
c = 2.70x10⁻³atm / 0.082atmL/molK*298K
c = 1.106x10⁻⁴ moles protein / L
The moles of protein in 150mL = 0.150L:
0150L * (1.106x10⁻⁴ moles protein / L) = 1.659x10⁻⁵ moles protein
The molar mass is the ratio of mass and moles:
0.231g / 1.659x10⁻⁵ moles protein =
13924g/mol is the molar mass of the proteinHow do the Carnivorous plants survive without soil?
Answer:
A simple answer: Carnivores don't eat plants only flesh. So they would not need soil. But it would be hard for Carnivores to get energy because they get energy indirectly from the animals (herbivores) that they eat. How do they get the energy from a herbivore you might ask. Herbivores eat only plants and that gives the herbivore the plant's energy; but if the herbivore gets eaten, it is indirectly transferred into the Carnivore. Hope this helped!!
Carnivore = only feeds on flesh
Herbivore = eats only plants
Omnivore = eats plants and animals/flesh
Subtract to find the temperature changes
for the water and the metal.
Answer:
???what metal????????????
Se trata 50 g de aluminio que posee 10% de impurezas con suficiente cantidad de ácido sulfúrico ¿qué peso de sulfato de aluminio se obtiene si el porcentaje de rendimiento fue de 70%? P.A. (uma): Al: 27, S = 32, O = 16
Respuesta:
199.5 g
Explicación:
Paso 1: Escribir la reacción balanceada
2 Al + 3 H₂SO₄ ⇒ Al₂(SO₄)₃ + 3 H₂
Paso 2: Calcular la masa pura de 50 g de Al
Aluminio tiene 10% de impurezas, es decir, 10% de 50 g = 5 g. Luego, tiene 50 g - 5 g = 45 g de Al puro.
Paso 3: Calcular la masa teórica de Al₂(SO₄)₃ obtenida a partir de 45 g de Al
La relación de masas de Al₂(SO₄)₃ a Al es 342:54.
45 g Al × 342 g Al₂(SO₄)₃/54 g Al = 285 g Al₂(SO₄)₃
Paso 4: Calcular la masa real de Al₂(SO₄)₃ obtenida
El rendimiento de la reacción es de 70%.
285 g × 70% = 199.5 g
los metales se oxidan
An oxygen atom has 8 protons. What number of neutrons would make an
oxygen atom most stable?
A. 10
B. 6
C. 12
D. 8
D. 8
Hope this helps! :)
______________
Answer:
D: 8 neutrons would make it most stable
A molecule has four bonded atoms around a central atom. The central atom does not have any lone pairs of electrons. What is the geometry of the molecule?
Answer:
Tetrahedral. Tetra- signifies four, and -hedral relates to a face of a solid; “tetrahedral” literally means “having four faces. ” This shape is found when there are four bonds all on one central atom, with no lone electron pairs. In accordance with the VSEPR theory, the bond angles between the electron bonds are 109.5o ...
There are two characteristics of molecules, one is geometry and other is shape. Shape is excluding lone pair surrounding the central element and geometry is including the lone pair. Therefore, the geometry of given molecule is tetrahedral.
What is VSEPR theory?
VSEPR stands for valence shell electron pair repulsions. VSEPR theory is used to predict the shape and geometry of molecules on the basis of valence electrons pairs that are present around the central element of the molecule.
According to VSEPR theory, Lone pair lone pair repulsion is greater than bond pair bond pair repulsion. There are so many limitations of VSEPR theory. There is a repulsion between bond pair electrons and lone pairs present on the central element.
A molecule has four bonded atoms around a central atom. The central atom does not have any lone pairs of electrons. The geometry of such molecule is Tetrahedral. Geometry does not include lone pair on central atom.
Therefore, the geometry of given molecule is tetrahedral.
To know more about VSEPR theory, here:
https://brainly.com/question/19582124
#SPJ6
State the name(s) of the sub-atomic particle(s) that have/has a positive charge. Answer with the name of the particle(s) only.
A. Neurons
B. Protons
C. Electrons
Answer:
protons because they have the most positive charge
which is an example of the force of attraction between two obects that have mass?
Answer:
gravity
Explanation:
Gravity is an example of the force of attraction between two objects that have mass.
What type of nuclear decay is shown by the reaction below?
A. Alpha
B. Gamma
C. Beta
O D. Fission
Answer:
C. Beta
Explanation:
If 3.02 g of CuNO3 is dissolved in water to make a 0.560 M solution, what is the volume of the solution in milliliters?
Answer: The volume of the solution is 28.75 mL
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)
Given values:
Molarity of copper nitrate = 0.560 M
Given mass of copper nitrate = 3.02 g
Molar mass of copper nitrate = 187.56 g/mol
Putting values in equation 1, we get:
[tex]0.560=\frac{3.02\times 1000}{187.56\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{3.02\times 1000}{187.56\times 0.560}=28.75mL[/tex]
Hence, the volume of the solution is 28.75 mL
Please help me with this in the picture I need 8 thing wrong and 8 what should they do right
Can someone please solve this for me and explain it
83.3% yield
Explanation:
First, we need to convert 240 g of [tex]Fe_{2}O_{3}[/tex] into moles:
[tex]240 \:g \:Fe_{2}O_{3} \:\times(\frac{1\:\text{mol}\:Fe_{2}O_{3}}{159.69\: \text {g}\:Fe_{2}O_{3}})[/tex]
[tex]=1.50 \:\text{mol}\:Fe_{2}O_{3}[/tex]
Next, find the theoretical Fe yield using molar ratios.
[tex]1.50 \: \text {mol} \: Fe_{2}O_{3}\: \times (\frac{2\: \text{mol} \: Fe}{1 \:\text{mol} \: Fe_{2}O_{3}})[/tex]
[tex] = 3.00 \: \text{mol} \: Fe[/tex]
Then convert this back into grams:
[tex]3.00 \: \text{mol} \:Fe \times (\frac{55.845 \: \text{g} \: Fe}{1 \: \text{mol} \: Fe}) = 168 \: \text{g} \: Fe[/tex]
Note that actual yield is only 140 g Fe so percentage yield is
[tex]\dfrac{140\:\text{g}\:Fe}{168\:\text{g}\:Fe} \times 100[/tex]%= 83.3%
83.3%
The answer is 83.3%
BRAINILIEST PLEASErare earth elements plz
Answer:
Rare earth elements are lanthanum, cerium, praseodymium, neodymium, promethium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium, scandium, yttrium - that appear in low concentrations in the ground.
Explanation:
The rare earth elements (REE) are a set of seventeen metallic elements. These include the fifteen lanthanides on the periodic table plus scandium and yttrium. Rare earth elements are an essential part of many high-tech devices.
name the gas which is formed when coal is heated in the absense of air
Answer:
Coke
Explanation:
A solid fuel formed by heating coal in the absence of air is coke. Coke is black colored, tough porous substance. It is pure carbon.
Please I need an explanation on the relationship between concentration and volume of reacting substances
Answer:
when d volume of a substance is high, the concentration is gonna b low...
Jus lyk putting much water in just a cube of sugar
Explanation:
So lower volume, higher concentration
A student wants to make a 0.600 M aqueous solution of barium sulfate, BaSO4, and has a bottle containing 12.00 g of barium sulfate. What should be the final volume of the solution?
Find the numerical answer for this question and make sure to include the following:
What is the formula for molarity?
What is the molar mass for barium sulfate?
When you give your numerical answer, what are the correct significant figures and how do you know that is the correct amount?
Need this ASAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer: The volume of the solution is 85.7 mL
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)
We are given:
Molarity of solution = 0.600 M
Given mass of [tex]BaSO_4[/tex] = 12.00 g
We know, molar mass of [tex]BaSO_4=[(1\times 137.33)+(1\times 32.07)+(4\times 16)]=233.4g/mol[/tex]
Putting values in equation 1, we get:
[tex]0.600=\frac{12.00\times 1000}{233.4\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{12.00\times 1000}{233.4\times 0.600}=85.68mL=85.7mL[/tex]
The rule of significant number that is applied for the problems having multiplication and division:
The least number of significant figures in any number of the problem determines the number of significant figures in the answer.
Here, the least number of significant figures is 3 that is determined by the number, 0.600. Thus, the answer must have these many significant figures only.
Hence, the volume of the solution is 85.7 mL
Why do we need to know these organic molecules?
Are they important to living things?
Answer:
Organic molecules are important to living things because life is based on the properties of carbon.
Properties of Carbon
Carbon is an important element because it can form four covalent bonds.
Carbon skeletons can vary in length, branching, and ring structure.
The carbon skeletons contain the functional groups that are involved in biochemical
Explanation:
Hope it helps
Help please I’ll give you brainless
Answer:
Step 9
Explanation:
The reason i selected step 9, is if you take a look at the picture hes setting up a funnel,With filter paper and if you take a look at number ''9'' questions it says set up a funnel, filter paper and filter flask which is shown in the picture on top that's how i got my answer
Which two of the following changes of state involve solids?
Select two (2) answers
A. melting
B. boiling
C. freezing
D. evaporating
Answer:
Answer is A... Melting and freezing
help me with this attachment please
Answer:
See explanation
Explanation:
Let us recall that the basic rule in writing balanced chemical reaction equations is that the number of atoms of each element on the right hand side of the reaction equation is the same of the number of atoms of the same element on the left hand side of the reaction equation.
The reaction of red hot iron and steam is written as follows;
3Fe + 4H2O → Fe3O4 + 4H2.
The decomposition reaction of ammonium dichromate is written as;
(NH4)2Cr2O7 → N2 + Cr2O3 + 4H2O
Reaction of aluminium, sodium hydroxide and water is as follows,
2Al + 2NaOH + 2H2O ----> 2NaAlO2 + 3H2
Reaction of potassium bicarbonate with sulphuric acid;
2KHCO3 + H2SO4 -------> K2SO4 + 2H2O + 2CO2
Reaction of zinc and sodium hydroxide is as follows;
Zn + 2NaOH→Na2ZnO2 + H2
What is a reaction rate
Answer:
Explanation:
A reaction rate is the measure of the change in concentration of the disappearance of reactants or the change in concentration of the appearance of products per unit time
In the chemical reaction between aqueous magnesium chloride and sodium metal, what chemical amount (mol) of magnesium metal can be precipitated (produced) with 12.6 mol of sodium metal?
Answer:
6.3moles
Explanation:
The balanced equation of the reaction described above between aqueous magnesium chloride and sodium metal is as follows:
MgCl2(aq) + 2Na(s) → 2NaCl(aq) + Mg(s)
From the above equation, 2 moles of sodium metal (Na) produces 1 mole of Magnesium metal (Mg)
Hence, 12.6 mol of Na will produce (12.6/2) mol of Mg.
12.6/2 = 6.3moles of Mg metal.
What is pH?
O A. A measurement indicating how acidic a solution is
B. A concentration of total ions dissolved in solution
C. A level of dissolved gases that are in solution
O D. A component of solutions that makes them acidic
Answer:
Awnser is A
Explanation:
Answer:
Hello There!!
Explanation:
The answer is↬O A. A measurement indicating how acidic a solution is.
hope this helps,have a great day!!
~Pinky~
SOMEONE HELP ASAP I NEED TO FIND AN ANSWER
Answer:
A) Q + XZ = X + QZ is a single displacement reaction.
B) Q + Z = QZ is a synthesis reaction
C) QT = Q + T is a decomposition reaction
D) QT + XZ = QZ + XT is double replacement reaction.
Explanation:
A) Q + XZ = X + QZ
This is a single displacement reaction because it is one in which one element is substituted for another one in a compound. In this case X is substituted for Q.
B) Q + Z = QZ
This is a synthesis reaction because Q and z combine to form a single product QZ.
C) QT = Q + T
This is a decomposition reaction because the compound QT breaks down to form 2 simpler substances Q and T.
D) QT + XZ = QZ + XT
Thus is a double replacement reaction because QT and XZ have exchanged cations to form new compounds QZ and XT
