The temperature of a sample of silver increased by 23.8 °C
when 261 J of heat was applied.
What is the mass of the sample?

Answer: The volume of given amount of ethanol at this temperature is 159.44 mL

Explanation:

Specific gravity is given by the formula:

[tex]\text{Specific gravity}=\frac{\text{Density of a substance}}{\text{Density of water}}[/tex]

We are given:

Density of water = 0.997 g/mL

Specific gravity of ethanol = 0.787

Putting values in above equation, we get:

[tex]0.787=\frac{\text{Density of a substance}}{0.997g/mL}\\\\\text{Density of a substance}=(0.787\times 0.997g/mL)=0.784g/mL[/tex]

Density is defined as the ratio of mass and volume of a substance.

[tex]\text{Density}=\frac{\text{Mass}}{\text{Volume}} [/tex] ......(1)

Given values:

Mass of ethanol = 125 g

Density of ethanol = 0.784 g/mL

Putting values in equation 1, we get:

[tex]\text{Volume of ethanol}=\frac{125g}{0.784g/mL}=159.44mL[/tex]

Hence, the volume of given amount of ethanol at this temperature is 159.44 mL

Answer:

option b is your right answer

Answer:

[tex]v_{solute}=160mL[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to calculate the volume of methyl alcohol solute by using the definition of by-volume percentage:

[tex]\%v=\frac{v_{solute}}{v_{solution}} *100\%[/tex]

Whereas we solve for the volume of the solute as shown below:

[tex]v_{solute}=\frac{\%v*v_{solution}}{100\%} \\\\v_{solute}=\frac{80\%*200mL}{100\%}\\\\ v_{solute}=160mL[/tex]

Regards!

Answer:

The most abundant isotope is ⁴⁰Ca and the least abundant is ⁴⁶Ca

Explanation:

The mass, in percentage, of eah isotope of Calcium is their fractional composition multiplied by 100:

40Ca-0.96941*100 =  96.941% of ⁴⁰Ca

42Ca-0.00647*100 = 0.647% of ⁴²Ca

43Ca-0.0013*100 = 0.13% of ⁴³Ca

44Ca-0.02086*100 = 2.086% ⁴⁴Ca

46Ca-0.00004*100 = 0.004% ⁴⁶Ca

48Ca-0.00187*100 = 0.187% of ⁴⁸Ca

That means the most abundant isotope is ⁴⁰Ca and the least abundant is ⁴⁶Ca

Answer:

0.515 M

Explanation:

The reaction that takes place is:

First we convert 1.22 g of malonic acid into moles, using its molar mass:

Then we convert 0.01172 malonic acid moles into NaOH moles, using the stoichiometric coefficients of the balanced reaction:

Finally we calculate the concentration of the NaOH solution, using the number of moles and given volume:

Converting 45.5 mL ⇒ 45.5/1000 = 0.0455 L

Answer:

Laws governing gas behavior.

Explanation:

Boyle's law:

It relates the pressure and volume of an ideal gas at a constant temperature.

According to this law:

"The volume of a fixed amount of gas at constant temperature is inversely proportional to its pressure".

[tex]P \alpha V[/tex].

Charle's law:

It relates the volume and absolute temperature of an ideal gas at a constant pressure.

According to this law:

"The volume of a fixed amount of gas at constant pressure is directly proportional to its absolute temperature".

[tex]V \alpha T[/tex].

Avogadro's law:

According to this law:

equal volumes of all gases under the same conditions of temperature and pressure contain, an equal number of moles.

[tex]V \alpha n[/tex].

Ideal gas equation:

By combining all the above-stated gas laws, this equation is formed as shown below:

[tex]V \alpha \frac{nT}{P} \\=> V= R. nT/ P\\=>PV=nRT[/tex]

R is called universal gas constant.

It has a value of 0.0821L.atm.mol-1.K-1.

Answer:

Boyle's law, Charle's law,  Guy Lussac's law and Avogadro's law

Explanation:

All the gases behaves similarly when the environment conditions are normal. But when the physical condition changes like when the pressure, volume or temperature changes, the gas behaves differently and shows a deviation.

The number of gas laws are :

Boyle's Law

Boyle's law states that when the temperature remaining constant, the pressure of the gas varies inversely to the volume of the gas.

i.e.   [tex]P \propto \frac{1}{V}[/tex]

Charle' law

Charle's law states that when pressure is constant, the temperature of a gas is directly proportional to the volume.

i.e. , [tex]$T \propto V$[/tex]

Gay Lussac's law

Gay - Lussa law states the volume and the mass of the pressure of the gas is directly proportional to the  temperature of the gas.

i.e. P.T = constant

Avogadro's law

It states that under the conditions of same pressure as well as temperatures, the gases having equal volumes will have same numbers of molecules.

i.e. [tex]\frac{V_1}{n_1}=\frac{V_2}{n_2}[/tex] = constant

Answer:

Sound travels through the air in approximately 332 metres per second?

Explanation:

is this what you are looking for>

Answer:

D. the minerals they contain

Hope this answer is right!!

Answer:

SI

Explanation:

I would say silicon because it is also another metalloid. Boron is a metalloid.

Answer: c potassium.

Explanation:

potassium is the most reactive metal among the given options.

D is absolutely wrong.

Answer:

Lake Treatment

Explanation:

Sulphuric dioxide produced by industries and released into the atmosphere returns as acid rain or sulphuric acid. In lakes impacted by acid rain, such as in Ontario, Canada, the application of alkalis dropped by airplanes can control and neutralize the water's pH level.

Answer: See explanation

Explanation:

Vacuum filtration is referred to as a fast filtration technique that is used in the separation of solids from liquids. It is also used to collect a desired solid. It basically uses a side-arm flask and a Buchner funnel.

Based on the question, the techniques that should be used to ensure a quantitative separation goes thus:

• Wet the filter paper before the mixture is poured into the filter funnel.

• Then, carefully rinse the flask with a little amount of water into the filter funnel.

• After that, the solid on the filter paper should be washed the with a small amount of water.

• Finally, Dry the solid on the filter paper when the separation is done.

Answer:

yes

Explanation:

cos of high electron transfer

Answer:

Chlorine gas reacts with potassium bromide to form potassium chloride in solution and liquid bromine.

Answer:

DDDDD

Explanation:

Answer:

The answer is C... I am almost positive.

Answer:

Option 1. NO

Explanation:

The balanced equation for the reaction is given below below:

4NH₃ + 6NO —> 5N₂ + 6H₂O

From the balanced equation above,

4 moles of NH₃ reacted with 6 moles of NO.

Finally, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

4 moles of NH₃ reacted with 6 moles of NO.

Therefore, 1.24 moles of NH₃ will react with = (1.24 × 6)/4 = 1.86 moles of NO

From the calculation made above, we can see that a higher amount of NO (i.e 1.86 moles) than what was given (i.e 1.79 moles) is needed to react completely with 1.24 moles of NH₃.

Therefore, NO is the limiting reactant and NH₃ is the excess reactant.

Thus, the 1st option gives the correct answer to the question

Answer:

1. NO .

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to identify the limiting reactant by simply calculating the moles of any product, say N2, via the moles of each reactant and including the corresponding mole ratio (4:5 and 6:5):

[tex]1.24molNH_3*\frac{5molN_2}{4molNH_3}=1.55molN_2 \\\\1.79molNO*\frac{5molN_2}{6molNO}=1.50molN_2[/tex]

Thus, since NO yields the fewest moles of N2 product, we infer it is the limiting reactant.

Regards!

Answer:

[tex]rate = k[C] {}^{2} [D] {}^{2} \\ 7.5 \times {10}^{ - 3} = k {(0.25)}^{2} {(0.50)}^{2} \\ k = \frac{7.5 \times {10}^{ - 3} }{ {(0.25)}^{2} {(0.50)}^{2} } \\ k = 0.48 \: {mol}^{ - 3} {dm}^{9} {s}^{ - 1} [/tex]

Four quantities must be known for a complete physical description of a sample of a gas: temperature, volume, amount, and pressure. ... The height of the mercury column is proportional to barometric pressure, which is often reported in units of millimeters of mercury (mmHg), also called torr.

Answer:

A).

Strontium Sulphate is soluble

Answer:

The maximum theoretical percent recovery from the recrystallization of 1.00 g of benzoic acid from 15 mL of water = 94.9%

Note: The question is incomplete. A similar but complete question is given below:

The solubility of benzoic acid in water is 6.80g per 100mL at 100 degrees C and 0.34 g per 100mL at 25 degrees C.

Calculate the maximum theoretical percent recovery from the recrystallization of 1.00 g of benzoic acid from 15 mL of water, assuming the solution is filtered at 25 degrees C.

Explanation:

Solubility of benzoic acid in water at 100 degrees C = 6.80g per 100mL

Solubility of benzoic acid in water  at 25 degrees C =  0.34 g per 100mL

Mass of benzoic acid to be theoretically recovered from 100 mL of water = 6.80 g - 0.34 g = 6.46 g

At 25 degrees;

0.34 g of benzoic acid is present in 100 mL of water

x g of  benzoic acid will be present in 15 mL of water

x = 0.34 × 15 / 100 = 0.051 g

Mass of benzoic acid to be theoretically recovered from 25 mL of water = 1.00 g - 0.051 g = 0.949 g

Maximum theoretical percent recovery = (mass recovered / original mass dissolved) x 100%

Maximum theoretical percent recovery =  (0.949 / 1.00) × 100% = 94.9 %

Therefore, the maximum theoretical percent recovery from the recrystallization of 1.00 g of benzoic acid from 15 mL of water = 94.9%

Answer:

0.348 L

Explanation:

Step 1: Given data

Step 2: Calculate the volume of the concentrated solution

We want to prepare a dilute solution from a concentrated one. We can calculate the volume of the concentrated solution using the dilution rule.

C₁ × V₁ = C₂ × V₂

V₁ = C₂ × V₂ / C₁

V₁ = 1.07 M × 2.11 L / 6.49 M = 0.348 L

Answer:

Work is a force causing the movement or displacement of an object

law of conservation mass:

1. Atoms cannot be created or destroyed in a chemical reaction.

2. Molecules cannot be created or destroyed in a chemical reaction.

3. Compounds cannot be created or destroyed in a chemical reaction.

4. Heat cannot be created or destroyed in a chemical reaction.

Answer: As temperature increases, the number of collisions increases and the energy of the collisions increases.

Explanation:

According to collision theory, for a reaction to take place it is necessary to have collisions between the reacting species or atoms.

A collision will only be effective if species coming together have a certain minimum value of internal energy equal to the activation energy of the reaction.

More is the number of collisions taking place in a chemical reaction more will be the kinetic energy of its molecules. As kinetic energy is the energy acquired due to motion of atoms or a substance.

Also, collisions increases with increase in temperature as:

[tex]K.E = \frac{3}{2}kT[/tex]

Kinetic energy is directly proportional to temperature. So, more is the temperature more will be energy of molecules.

Thus, we can conclude that as temperature increases, the number of collisions increases and the energy of the collisions increases.

Answer:

b) methanol, bp = 65°C.

Explanation:

Hello there!

In this case, it turns out necessary for us to firstly remember that the vapor pressure of a liquid is the pressure exerted by the gaseous particles in dynamic equilibrium with the present liquid and thus, the higher the vapor pressure, the weaker the liquid's intermolecular forces because they turn unstable.

In such a way, we can infer that the liquid with the highest vapor pressure, will have the lowest boiling point and therefore, the answer will be b) methanol, bp = 65°C.

Regards!

Answer: 88 grams

Explanation:

Answer:

turtle

Explanation:

they are slow and they take there time

Explanation:

this explanation may help u to understand:)

Answer:

density = d = 19.3g/cm^3

Mass of gold = m= 20g

now

we know,

density = mass / volume

or volume = mass/ density

volume = 20/19.3 = 1.036cm^3

Explanation: