Answer:
Is there a picture for it
Explanation:
because it would be a hard
Which question would most likely be studied by a biologist?
A.
How can a drug that treats cancer be synthesized?
B.
How can cancer-causing substances be regulated?
C.
How much ultraviolet radiation passes through the atmosphere?
D.
What causes cancer cells to grow uncontrollably?
Answer:
The correct answer would be - D. What causes cancer cells to grow uncontrollably?
Explanation:
A Biologist is a person that studies living organisms and the study of living organisms and their process called biology. Biology is a very vast field that involves many branches such as zoology, botany, biochemistry, immunology, biophysics, anatomy, ecology and many more.
So, given all are can be an example of the study biology wanted to do, however, the question most likely studied by a biologist would be What causes cancer cells to grow uncontrollably as it deals with an organism and their biological process.
How are liquid water, ice, water different from each other?
Answer: In liquid water, water molecules are moving faster. They are still close together, but they are no longer stuck in a rigid pattern as they are in ice. Water molecules in liquid water are constantly sliding past and bumping into each other; they keep moving from one place to another.
Answer:
they are different forms
Explanation:
ice is solid
and water is liquid
they also have different densities
Chemistry 1 question please help!! 10 points
Answer:
3
Explanation:
its the 3 one it is
an engineer chooses to use bamboo as a building material because it grows quickly and needs little space to grow. This is an example of?
Answer:
A) This is an example of Green Design
Explanation:
Explain why solids and liquids are difficult to compress
whereas gases can easily be compressed.
Answer:
Because they take up a certain amount of volume because there is no space in-between the particles, a gases can be compressed because there is alot of space in-between each particle
Explanation:
Given the structural formula: This compound is classified as an
Answer:
A.) aldehyde is the answer
From the given structural formula, the compound is ethanamide and thus, belongs to the group of amides. Thus, the correct option is B.
Amide is a functional group of organic compounds having an acyl group (R-C=O) linked to amine group (-NR¹R² where R¹ and R² are hydrogen atoms or alkyl groups). The amide functional group is given as -CON= (not double bond with N, but two distinct single bonds).
Amides can be classified into the following types depending on the moiety attached to nitrogen other than the carbonyl carbon:
1. Primary amides - amide in which the nitrogen atoms is attached to two hydrogen atoms
2. Secondary amides - in which the nitrogen atom is attached to one hydrogen and one alkyl group.
3. Tertiary amides - in which the nitrogen atom is attached to two alkyl groups.
Learn more about amides in:
https://brainly.com/question/29595493
#SPJ2
WHAT HAPPENS WHEN ELECTRIC CURRENT PASSES THROUGH ACIDIFIED WATER.
Answer:
When an electric current is passed through acidified water, it decomposes to give hydrogen and oxygen gas. The hydrogen gas is obtained at the cathode and the oxygen gas is obtained at the anode
What is the delta H when 72.0 grams H2O condenses at 100.00C?
Here are some constants that you MAY need.
specific heats heat of fusion heat of vaporization
H2O(s) = 2.1 J/g0C 6.01 kJ/mole 40.7 kJ/mole
H2O(L) = 4.18 J/g0C
H2O(g) = 1.7 J/g0C
2930 kJ
163 kJ
-163 kJ
-2930 kJ
Answer: The value of [tex]\Delta H[/tex] is -163 kJZ
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
We are given:
Given mass of water = 72.0 g
Molar mass of water = 18 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of water}=\frac{72.0g}{18g/mol}\\\\\text{Moles of water}=4mol[/tex]
Calculating the heat released for the condensation process:
[tex]\Delta H=n\times \Delta H_{(vap)}[/tex] ......(2)
where,
[tex]\Delta H[/tex] = amount of heat released
n = number of moles of water = 4 moles
[tex]\Delta H_{(vap)}[/tex] = specific heat of vaporization = -40.7 kJ/mol
Negative sign represents the amount of heat released.
Putting values in equation 2:
[tex]\Delta H=4mol\times (-40.7kJ/mol)=-163kJ[/tex]
Hence, the value of [tex]\Delta H[/tex] is -163 kJ
WHAT IS EXOTHERMIC EXPLAIN
please ।
।।।
Answer:
Exothermic reactions are reactions or processes that release energy, usually in the form of heat or light. In an exothermic reaction, energy is released because the total energy of the products is less than the total energy of the reactants.Explanation:
I hope this helps u have a nice day ☘Answer:
An EXOTHERMIC reaction is when energy is released.
Which defines the word planet?
A. A large body that revolves around the Moon.
B. A large body suitable for life.
C. A large body that contains water and land.
D. A large body that revolves around the Sun.
Answer:
I think it's D cause one of the requirements for a planet is that it has to revolve around a star
Which of the following statements is correct about electrical insulators?
A. They do not contain any atoms.
B. Their protons are not allowed to move about freely.
C. The electrons are not able to move about freely.
D. They are good at conducting heat only.
Answer:
the answer is C in my opinion.. hope this might be helpful
Consider the following intermediate chemical equations.
CH2(g) →C(s) + 2H2(g)
CC1.(g) → C(s) +2012(g)
H2(g) +C12(g) → 2HCl(9)
ΔH, = 74.6 kJ
ΔH2 = 95.7 kJ
ΔΗ =
ΔHg =-92.3 kJ
What is the enthalpy of the overall chemical reaction CH (g) +4012(g) → CCl4(h)+ 4HCl(g)?
Answer: The enthalpy of the overall chemical equation is -205.7 kJ
Explanation:
Hess's law is defined as the law which states that the total amount of heat absorbed or released for a given chemical reaction will remain the same whether the process occurs in one step or several steps.
In this law, a chemical equation is treated as an ordinary algebraic expression that can be added or subtracted to yield the required overall equation.
The enthalpy change or heat of the overall reaction is the summation of the enthalpies or heats of the intermediate reactions involved in the process.
The given overall chemical equation follows:
[tex]CH_4(g)+4Cl_2(g)\rightarrow CCl_4(g)+4HCl(g);\Delta H^o_{rxn}[/tex]
The intermediate equations for the above reaction are:
(1) [tex]CH_4(g)\rightarrow C(s)+2H_2(g);\Delta H_1=74.6 kJ[/tex]
(2) [tex]CCl_4(g)\rightarrow C(s)+2Cl_2(g);\Delta H_2=95.7kJ[/tex]
(3) [tex]H_2(g)+Cl_2(g)\rightarrow 2HCl(g);\Delta H_3=-92.3kJ[/tex]
According to Hess law, the enthalpy of the reaction becomes:
[tex]\Delta H^o_{rxn}=[1\times (\Delta H_1)] + [1\times (-\Delta H_2)] + [2\times (\Delta H_3)][/tex]
Putting values in above expression, we get:
[tex]\Delta H^o_{rxn}=[1\times (74.6)] + [1\times (-95.7)] + [2\times (-92.3)]\\\\\Delta H^o_{rxn}=-205.7kJ[/tex]
Hence, the enthalpy of the overall chemical equation is -205.7 kJ
Which of the following could possibly be true about a strong acid? (Check all that apply:).
It will completely dissociate (break apart) when dissolved in water.
It could have a pH of 6
It could have a pH of 13
Only a few of the acid molecules will dissociate (break apart).
It could have a pH of 2.
It could have a pH of 9
Answer:
it could have a pH of 2 it will completely dissociate when dissolved in waterUse mathematics to prove that the 5.50 grams of salicylic acid (C7H6O3) used in this experiment is equal to 0.04 mol.
Answer:
Please find the answer to the question below
Explanation:
In chemistry, the following mathematical formula is used to calculate the number of moles contained by a substance:
mole = mass of substance (g)/molar mass of substance (g/mol)
Molar mass of salicylic acid (C7H6O3) = 12(7) + 1(6) + 16(3)
= 84 + 6 + 48
= 138g/mol
Mass = 5.50grams
mole = 5.5/138
mole = 0.039
Approximately, the number of moles of 5.5grams of salicylic acid is 0.04moles. This is in accordance with the mole value (0.04) given in this question.
Which sequence of steps describes the life cycle of a lake?
A. Runoff fills a depression - sediments build up - water becomes
increasingly shallow
B. Runoff fills a depression - sediments are eroded - water becomes deeper
C. Runoff fills a depression - sediments build up
- water rises continuously
D. Runoff fills a depression - sediments are eroded - water spreads over a wider area
Answer:
The actual sequence of steps which describe the life cycle of a lake is given below:
C. Runoff fills a depression - sediments build up
- water rises continuously
Explanation:
This is because, the water which builds up as a result of the runoff water accumulating on the depression helps towards building up. When it must have accumulated greatly, it ends up forming a lake.
What happens when an unstable nucleus undergoes radioactive decay?
A. Electrons change energy levels to balance the nucleus.
B. Energy is absorbed by the nucleus to make it more stable.
O C. Particles or electromagnetic radiation are emitted.
D. The nucleus increases in mass through radioactive decay.
Briefly explain why adding insulation to an attic helps reduce heating costs.
Answer:
Insulation reduces the exchange of heat through a surface such as a wall, attic, duct or roof. In a well-insulated home, less warm air escapes from the house during the winter, and less cool air escapes during the summer, reducing the amount of energy needed for heating and cooling
Joelle is a manager at a construction company, and she is interested in the chemistry behind the materials they use. She has begun studying the materials used to fill walls. She knows that to keep the temperature inside a room steady the material must be a thermal insulator, and she predicts that materials should not be acidic or else they would dissolve too easily in water.
Which of these is a molecular ingredient that could be used in a wall-filling material ?
C27H36N2O10
Na6Ba6
NeNa
HCl
Answer:
a
Explanation:
A molecular ingredient that could be used in a wall-filling material is C₂₇H₃₆N₂O₁₀, is not a good thermal insulator, hence option A is correct.
The big molecule C₂₇H₃₆N₂O₁₀ is a poor thermal insulator. Since NeNa is a relatively reactive chemical, it would probably dissolve in water far too quickly. The acidic molecule HCl would dissolve far too quickly in water.
Not a good thermal insulator is C₂₇H₃₆N₂O₁₀. It is a big molecule composed of a lot of hydrogen atoms. Since hydrogen atoms are excellent heat conductors, they would be ineffective in stopping heat from passing through a material used to fill a wall.
Thus, the option (A) C₂₇H₃₆N₂O₁₀ is correct.
Learn more about thermal insulator, here:
https://brainly.com/question/23134662
#SPJ6
A + 2 B + 4 C → products is known to be second order in A, first order in B and independent of the concentration of C. What is the value of the rate constant for this reaction if its rate is 0.783 M · s−1 when [A] = 5.00 M, [B] = 7.00 M, and [C] = 3.00 M? −2 −1 Answerinunitsof M ·s .
Answer:
4.47 × 10⁻³ M⁻² s⁻¹
Explanation:
Let's consider the following generic equation.
A + 2 B + 4 C → products
This reaction is known to be second order in A, first order in B and independent of the concentration of C (zero order in C). The rate law is:
rate = k × [A]² × [B] × [C]⁰
rate = k × [A]² × [B]
where k is the rate constant
When the rate is 0.783 M/s, [A] = 5.00 M, [B] = 7.00 M, and [C] = 3.00 M, the rate constant is:
k = rate / [A]² × [B]
k = 0.783 M/s / (5.00)² × (7.00) = 4.47 × 10⁻³ M⁻² s⁻¹
What does a vacuole mean
Answer:
a space or vesicle within the cytoplasm of a cell, enclosed by a membrane and typically containing fluid.
or
a small cavity or space in tissue, especially in nervous tissue as the result of disease.
4. What is a renewable resource? List some examples.
Answer:
Renewable resources include biomass energy (such as ethanol), hydropower, geothermal power, wind energy, and solar energy. Biomass refers to organic material from plants or animals. This includes wood, sewage, and ethanol (which comes from corn or other plants).
five examples of renewable resources
Solar energy.
Wind energy.
Geothermal energy.
Hydropower.
Bioenergy.
I hope it help you
Answer:
The most popular renewable energy sources
currently are
Solar energy
Wind energy
Hydro energy
Tidal energy
Geothermal energy
Biomass energy
Which two laws were discovered by Antoine Lavoisier and Joseph Proust?
The metric system is also known as the
Answer:
THE answer is all of above
Explanation:
A. 2 pts: In terms of conservation of mass, what were the results of each experiment (which one conserved mass and which one did not)?
B. 4 pts: PROVIDE a SPECIFIC explanation for "why" the results in both videos were different.
. 2 pts: Discuss differences in the experimental steps between the two videos (for example what was done in video one that was not done in
video two, why would this make a difference in conserving mass?)
• 2 pts: Look at both chemical equations (below for convenience), what difference in the type of products would have contributed to the
differences in why one conserved mass and one did not?
REACTION 1: Pb(NO3)2 (aq) + 2K1 (aq) --> 2KNO3 (aq) +Pölz (s)
• REACTION 2: NaHCO3(s) + CH3COOH(aq) → CO2(g) + H2Om + CH3COONa(aq)
Answer:
dftdffdgxrdfdrdxxxxdddddddddddddeeertdffddy
if five elements have atomic numbers 2,3,6,9 which two numbers are the most reactive??
Explanation:
[tex]element \: with \: 2 \: atomic \: number \\ \\ is \: stable \: because \: it \: has \: already \: \\ \\ completed \: its \: orbit \: \\ \\ but \: atomic \: number \: with \: 3 \: and \: 9 \\ \\ will \: have \: to \: become \: stable \: \\ \\ after \: giving \: one \: electron \\ \\ so \: \: element \: with \: 3 \: and \: 9 \: atomic \: number \\ \\ is \: most \: reactive[/tex]
calculate the molecular weight of CaCO3.
Answer:
Explanation:
CaCO3 = 1*Ca + 1*C + 3*O
=1*40 + 1*12 + 3*16
=40 + 12 + 48
=100 amu
What is the pH of a solution?
O A. A measure of the strength of the acid
B. A measure of the buffering ability of the solution
O c. A measure of the hydrogen gas concentration
O D. A measure of the acidity of the solution
Answer:
D. A measure of the acidity of the solution
Explanation:
pH is a measure of how acidic or basic a solution is, and is measured on a scale from 0-14, where 7 is neutral, anything less than 7 is acidic, and anything more than 7 is basic.
Por qué razón se fomenta la inmigración Europea?
Hola aquí va la respuesta!
Se fomentó la inmigración europea porque la economía no era buena y vinieron a Paraguay para mejorar su situación.
Hola aquí va la respuesta!
Se fomentó la inmigración europea porque la economía no era buena y vinieron a Paraguay para mejorar su situación.
Which of the following best describes an electron transition?
A. An electron gains or loses energy and moves between continuous
energy levels.
B. An electron gains or loses charge and changes into a proton or a
neutron.
C. An electron gains or loses energy and moves between quantized
energy levels.
D. An atom gains or loses an electron and becomes an ion.
Answer:
A. An electron gains or loses energy and moves between continuous
energy levels.
An example of a product made from a synthetic material is
Question 5 options:
A)
a PET plastic water bottle.
B)
knitted wool socks.
C)
a cotton t-shirt.
D)
a pine 2×4 board.
Hi there! A simple answer and explanation is below :)
Answer:
A) PET plastic water bottle
Explanation:
Plastic goes through a manufacturing process before being used to make bottles for liquids like milk, soda, motor oil, and shampoo, as well as dry items like pharmaceuticals and nutritional supplements. Plastic is made up of a variety of organic polymers, including polyethylene and ethylene, in its unprocessed condition. In a soft state, plastic can be molded into the desired shape and then cast into a solid stat
