the question is in the attachment

1) The order of decreasing priority would allow determining E/Z or R/S is "dbca".

2)  The order of decreasing priority would allow determining E/Z or R/S is "acbd".

Absolute configuration can be described as to the spatial arrangement of atoms within a chiral molecular entity. Absolute configuration in organic molecules, where carbon is bonded to four different substituents.

The absolute configuration has used a set of rules to describe the relative positions around the chiral center atom. The most common labeling method is the descriptors R or S where R and S refer to Rectus and Sinister.

The group with the highest atomic number will get the highest priority and the group with the lowest atomic number substituents will get the lowest priority. Therefore, the order of priority is -CH₂Br > -CH₂OH > -CH₂NH₂ > -CH₃.

Therefore, the order of priority for the second part is -F > -CHO > -CH₂OH > -CH₃.

Learn more about absolute configuration, here:

https://brainly.com/question/14365822

#SPJ5

Answer:

i have no answer for part A

part B

the one that has a 4 can be divided by 2 because reducing

part c

you can determine if an equation is written in the correct way by balancing the equation as if it had not been done already.

Answer:

Arrange the following compounds in order of acidity (highest to lowest): H2O, CH3COOH , HCl

A. CH3COOH > HCl > H2O

B. H2O > CH3COOH > HCl

C. HCl > H2O > CH3COOH

D. HCl > CH3COOH > H2O

Explanation:

The given substances are acetic acid, hydrochloric acid, and water.

Since HCl is a strong acid and it undergoes complete ionization.

CH3COOH acetic acid is a weak acid and it undergoes partial dissociation in water.

Pure water is a neutral substance.

Hence, the order of acidity is shown below:

HCl > CH3COOH > H2O.

Among the given options, option D is the correct answer.

Answer:

We know that the student was measuring a spectrum, and observed double yellow lines, he claimed that it was Sodium.

There are multiple elements with double yellow lines, like Mercury or Sodium, but Sodium has two bright yellow lines, so it is usually identified by them.

So when we look at a spectrum and we see a strong doublet in the yellow range, we can easily assume that it is Sodium.

Here we assume that the student only saw the yellow doublet, this would imply that the yellow doublet is way more intense than the other lines, that can't be seen (while for other elements with double yellow lines, we should see other lines with similar intensity) then we can conclude that it is Sodium.

The student is correct.

anode is oxidation

so look at the reduction potential for Pt and Kl

the one with the smaller reduction potential will undergo oxidation

the one with the larger reduction potential will undergo reduction

you have to flip the equation that undergoes oxidation because the reduction table always gives reduction equations

Answer: There are 20 milliliters of 1.0 M HCl is required to be diluted to make 200 mL of a 0.1 M solution.

Explanation:

Given: [tex]M_{1}[/tex] = 1.0 M,    [tex]V_{1}[/tex] = ?

[tex]M_{2}[/tex] = 0.1 M,    [tex]V_{2}[/tex] = 200 mL

Formula used is as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]

Substitute values into the above formula as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}\\1.0 M \times V_{1} = 0.1 M \times 200 mL\\V_{1} = \frac{0.1 M \times 200 mL}{1.0 M}\\= 20 mL[/tex]

Thus, we can conclude that there are 20 milliliters of 1.0 M HCl is required to be diluted to make 200 mL of a 0.1 M solution.

Answer:

liquefied petroleum gas

LPG is prepared by refining natural gas. it is made by refining crude oil or from extracted natural gas streams as they emerge from the ground.

Answer:

At higher temperatures, particles move faster and collide more, increasing solubility rates.

Agitation increases solubility rates as well, by bringing fresh solvent into contact with the undissolved solute

The smaller the particle size, the higher (faster) solubility rate. Vice versa, the bigger the particle size, the lower (slower) solubility rate.

Explanation:

Answer:

True.

Explanation:

The information presented in the question above regarding linoleic acid is true. Linoleic acid is, in fact, found in many oils and fats in the ester form. In addition, linoleic acid is considered a polyunsaturated fatty acid, due to the presence of two unsaturations in its composition. Its chemical formula is CH3-(CH2)4-CH=CH-CH2-CH=CH-(CH2)7COOH and it is an essential fatty acid for the human body, as it is essential in the composition of arachidonic acid that is responsible for building muscle, managing body fat thermogenesis, and regulating core protein synthesis.

Answer:

azertyuiopazertyuiiop

Answer:

pH = -log[H+]

Where [H+] = Hydrogen ion concentration

In this case,

[H+] = 1 × 10^(-2) = 10^(-2)

log{10^(-2)} = -2

-log{10^(-2)} = -(-2) = 2

pH = -log{10^(-2)} = 2

and hi.!!!

Answer:

0.1

Explanation:

Hydrogen ion concentration can be calculated using the formula [H+] = 10^-pH

pH can be concentrated using ph = -log[H+]

let's calculate the initial pH before anything was added: pH = -log(1) = 0

it increased by 1 so the final pH is 1.

Now we'll find the [H+] of a solution with a pH of 1:

concentration = 10^(-1) = 0.1

This question is incomplete, the complete question is;

A certain liquid X has a normal boiling point of 150.4 °C and a molar boiling point elevation constant kb is 0.60 °Ckgmol⁻¹.

A solution is prepared by dissolving some urea (NH22CO) in 750 g of X. This solution boils at 150.9 °C . Calculate the mass of urea that was dissolved. Round your answer to 3 significant digits.

Answer:

the mass of urea that was dissolved is 37.5 g

Explanation:

Given the data in the question;

normal boiling point of X; Tb⁰ = 150.4 °C

boiling point of solution Tb = 150.9 °C

Change in boiling point Δt = Tb - Tb⁰  = 150.9 °C - 150.4 °C = 0.5 °C

Kb = 0.6 °C.kg.mol⁻¹

V = 750 g

Now, we know that

Δt = Kb × molality

so

0.5 = 0.6 × molality

molality = 0.5 / 0.6

molality = 0.833

we know that molar mass of urea is 60 g/mol

so

molality = mass × 1000 / molar mass × volume( g )

we substitute

0.833 = ( mass × 1000 ) / ( 60 × 750 )

0.833 = ( mass × 1000 ) / 45000

0.833 × 45000 = mass × 1000

mass = ( 0.833 × 45000 ) / 1000

mass = 37485 / 1000

mass = 37.485 ≈ 37.5 g   { 3 significance figure }

Therefore, the mass of urea that was dissolved is 37.5 g

Answer:

The Rf value of ibuprofen increases

Explanation:

TLC involves the elution of a solute using a mobile phase(solvent). The stationary phase is made of an adsorbent such as silica.

The extent of interaction between the solute and the mobile phase affects the Rf value. The greater the interaction between the solute and the solvent, the greater the Rf value.

On the other hand, the polarity of the solvent and the solute also affects the Rf value. If the solvent is changed from t-butyl methyl ether to acetone, the Rf value for ibuprofen increases because ibuprofen is polar and acetone is also polar hence there is greater interaction between the solvent and solute.

Answer:

The answer is 20

Explanation:

The question is incomplete, the complete question is;

It takes 412. KJ/mol to break a carbon-hydrogen single bond. Calculate the maximum wavelength of light for which a carbon-hydrogen single bond could be broken by absorbing a single photon. Round your answer to significant digits.

Answer:

289 nm

Explanation:

The energy of the photon = 412 × 10^3/6.02 × 10^23 = 6.84 × 10^-19 J

From;

E = hc/λ

h= Plank's constant

c= speed of light

λ = wavelength

λ = hc/E

λ = 6.6 × 10^-34 × 3 × 10^8/6.84 × 10^-19

λ = 2.89 × 10^-7 m

λ = 289 nm

Answer:

1.44 × 10⁻⁶

Explanation:

Step 1: Given data

Step 2: Calculate the concentration of H⁺ ions

We will use the definition of pH.

pH = -log [H⁺]

[H⁺] = antilog -pH = antilog -2.88 = 1.32 × 10⁻³ M

Step 3: Calculate the acid dissociation constant of the acid (Ka)

For a weak monoprotic acid, we will use the following expression.

Ka = [H⁺]²/Ca

Ka = (1.32 × 10⁻³)²/1.21 = 1.44 × 10⁻⁶

Answer:

oshfjidgshsjdh

Explanation:

918474828

Answer:

747.5 mL

Explanation:

Assuming ideal behaviour, we can solve this problem by using Boyle's law, which states that at constant temperature:

Where in this case:

We input the data given by the problem:

And solve for V₁:

Answer:

Water and Aluminium oxide

Explanation:

Have a nice day.

Answer:

0.465

Explanation:

To find the volume of a substance, divide the mass by the density.

M/D = V

10.0 / 21.5 = 0.4651163

Then round to 3 significant figures: and the density is 0.465

Answer:

The rate of the reverse reaction before any addition of CH3CO2- is zero

Explanation:

When the reaction is in equilibrium:

HCH3CO2(aq) + H2O ⇄ H3O+(l)(aq) + CH3CO2^-(aq)

The reaction quotient, Q = Ka and no more products or reactants are produced because their concentrations are in the right proportion.

Now, as no reaction occurs,

Answer:

118.06 mL

Explanation:

The neutralization reaction between HBr (acid) and Ba(OH)₂ (base) is the following:

2HBr + Ba(OH)₂ → BaBr₂ + 2H₂O

According to the equation, 2 moles of HBr react with 1 mol Ba(OH)₂. Thus, at the equivalence point the moles of acid and base react completely:

2 moles HBr = 1 mol Ba(OH)₂

We can replace the moles by the product of the molar concentration (M) and volume (V):

2 x (M HBr) x (V HBr) = M Ba(OH)₂ x V Ba(OH)₂

Now, we introduce the data in the equation to calculate the volume in mL of Ba(OH)₂:

V Ba(OH)₂ = (2 x (M HBr) x (V HBr))/M Ba(OH)₂

                 = (2 x 0.311 M x 57.7 mL)/(0.304 M)

                 = 118.06 mL

Therefore, 118 mL of Ba(OH)₂ are needed.

Answer:

Explanation:

From the given reaction:

[tex]6Cl_{2(g)}+2Fe_2O_{3(s)} \to 4FeCl_{3(s)}+3O_2[/tex]

From the Gibbs Free Energy table at standard conditions, the value of each compound is as follows:

[tex]G_f^0 \ of \ Cl_2 = 0 \ KJ/mol[/tex]                       [tex]G_f^0 \ of \ Fe_2O_3 = -742.24 \ KJ/mol[/tex]

[tex]G_f^0 \ of \ Fe_2Cl_3 = -334.05 \ KJ/mol[/tex]      [tex]G_f^0 \ of \ O_2 = 0 \ KJ/mol[/tex]

Now, the standard Gibb's Free energy for the given reaction can be estimated as follows:

[tex]\mathtt{\Delta G^0 = (4 *G_f^0(FeCl_3) +3*G_f^0(O_2)) - (6*G_f^0 (Cl_2) +2*G_f^0(Fe_2O_3))}[/tex]

[tex]\mathtt{\Delta G^0 = (4 *(-334.05) +3*(0)) - (6(0) +2(-742.24))}[/tex]

[tex]\mathtt{\Delta G^0 = 148.28 \ kJ/mol}[/tex]

using the following formula:

[tex]\mathtt{\Delta G^0 =-RTIn K_{eq}}[/tex]

the equilibrium constant can  be determined as:

[tex]\mathtt{ In K_{eq} =\dfrac{\Delta G^0 }{-RT}}[/tex]

[tex]\mathtt{ In K_{eq} =\dfrac{148.28*10^3 J/mol }{-(8.314 \ J/k mol )*298 \ K}}[/tex]

[tex]\mathtt{ In K_{eq} =-59.85}[/tex]

[tex]\mathtt{ K_{eq} =e^{-59.85}}[/tex]

[tex]\mathtt{ K_{eq} =1.0*10^{-26}}[/tex] to 2 significant figures.

Answer:

bent

Explanation:

The molecular formula of sulfur dioxide is written as SO₂

The molecular geometry of sulfur dioxide can be determined using the Lewis structure.

The Lewis structure shows the distribution of electrons around the atoms of a given compound such as sulfur dioxide (SO₂).

In this compound, sulfur is the central atom with 6 valence electrons.

The sulfur is bonded covalently with two oxygen atoms, each with 6 valence electrons. Oxygen contributes 2 lone pairs while sulfur which is the central atom contributes 1 lone pair of electrons in the bond.

The bond angle between the two oxygen atoms and the central sulfur atom is approximately 120⁰, as a result of the bent shape of the molecular structure.

Answer:

Explanation:

H

Answer:

A.

Explanation:

An equation with the equal amount and proportion of atoms of each element on both sides of the reaction is commonly referred to as a balanced chemical equation.

The law of conservation of matter asserts that no observable and empirical change in the amount of matter occurs within a conventional chemical process. As a result, each element in the product would have the same equal amount or numbers of atoms as the reactants.

Answer:

First, the number of ammonium sulfide molecules should be calculated:

N = NA × n,

where NA - the Avogadro number, n - number of moles.

N (ammonium sulfide) = 6.022 × 1023 × 8.5 mol = 51.187 × 1023.

The moelcular formula of ammonium sulfide is (NH4)2S. It means that each molecule contains 8 hydrogen atoms.

As a result, 8.5 mol of (NH4)2S contain:

51.187 × 1023 × 8 = 41 × 1024 hydrogen atoms.

Answer: 41 × 1024 hydrogen atoms

Answer:

a. [tex]Ag^0[/tex]

b. [tex]Ag^{+}[/tex]

c. [tex]Ca^{2+}F_2^-[/tex]

d. [tex]H_2^+S^{2-}[/tex]

e. [tex](C^{4+}O_3^{2-})^{-}[/tex]

f. [tex](Cr^{6+}O_4^{2-})^{2-}[/tex]

g. [tex]Cl_2^0[/tex]

h. [tex]Fe^0[/tex]

i. [tex]Cu^{2+}Cl_2^-[/tex]

j. [tex]C^{4-}H_4^+[/tex]

Explanation:

Hello there!

In this case, according to the concept of charge balance, which tell us that the overall charge is zero for any compound, except ions, it turns out possible to proceed as follows:

a. [tex]Ag^0[/tex]

b. [tex]Ag^{+}[/tex]

c. [tex]Ca^{2+}F_2^-[/tex]

d. [tex]H_2^+S^{2-}[/tex]

e. [tex](C^{4+}O_3^{2-})^{-}[/tex]

f. [tex](Cr^{6+}O_4^{2-})^{2-}[/tex]

g. [tex]Cl_2^0[/tex]

h. [tex]Fe^0[/tex]

i. [tex]Cu^{2+}Cl_2^-[/tex]

j. [tex]C^{4-}H_4^+[/tex]

Keep in mind lonely elements have 0 as their oxidation state.

Regards!