The pressure of a gas is 1.35 atm at temperature of 21oC. If the volume and amount of gas is unchanged, what pressure would be needed for the temperature to raise to 36oC?

Answer:

Move rapidly or move fast and farther apart. Hope this helps.

Answer: vibrate more rapidly

Explanation:

Answer:

D. Wind Speed

Explanation:

When the question brings up 35 m/h, the m/h stands for Miles per Hour. What option can you measure the miles per hour. Here's a hint, it applies to cars as well when cops give your parents speeding tickets. Miles per Hour = Speed. So, you are measuring the wind speed.

Answer:

Explanation:

Hb(CO)4(aq) + 4O2(g)  ⇄  Hb(O2)4(aq) + 4CO(g)

1 )  If we increase the concentration of CO(g) , the reaction above will proceed in reverse direction to decrease its concentration,  according to Le Chatelier principle. Hence more of Hb(CO)4(aq) will be formed.

2 )  If we decrease the concentration of O₂ , then also , reaction will proceed in reverse direction . Hence concentration of Hb(CO)4(aq) will be increased .

C. The concentrations of liquid water and water vapor are stable. it describes the fact that liquid water and water vapor are at equilibrium.

Hence, option (c) is correct. The concentration of liquid water and water vapor will become stable.

Learn more about water vapor:

https://brainly.com/question/17259832

Answer:

D working alone

Explanation:

Working alone is the only option that could potentially be a safety hazard; if you have no one watching your back, errors could occur, like dropping glass or burning your hand, and no one is around to help you.

Choices A, B, and C are not correct because those are all good safety standards.

Answer:

higher temperature → less kinetic energy → less space between particles higher volume

Explanation:

Answer:

 24He

Explanation:

When a nuclide is bombarded with alpha particles, we notice an increase in its mass and charge since an alpha particle has a mass of four and a charge of +2. recall that nuclear equations must be balanced. That is, the masses and charges on the left hand six and the right hand side of the nuclear reaction equation must be exactly the same.

Looking at the nuclear reaction at hand, the total mass on the left hand side has to be 246 while the total charge on the left hand side of the equation will be 98. Coming over to the right hand side, the total masses are also found to be the same as a neutron with no charge and a mass of 1 is produced. Hence the nuclear reaction equation is balanced when an alpha particle (helium nucleus) is substituted for X in the equation.

Answer:

24HE

I took the test!

Answer:

coal is made from compressed plant matter and how exactly did plants grow on the surface of an ocean. (as there is no land mass beneath the arctic.)

Explanation:

it would be like finding a fly in an ice cube to simplify it.

They were surprised to find coal in arctic because ordinarily coal was supposed to be found in warm or hot environments and not cold region like the arctic.

The arctic is located at the far northern part of the world which is characterized by its extreme cold weather.

A limited vegetation of plants such as grasses, mosses and lichens are found in this region irrespective of the extreme cold weather through out the year.

Coal is a type of fuel gotten from fossils and deposits of plant vegetation.

Scientist has discovered that continents do move over time through a process called continental drift. This is the reason why limited vegetaion is found in the arctic leading to the formation of coal.

Learn more here:

https://brainly.com/question/22647554

Answer:

The correct ones are:

|

|||

|V

V

Explanation:

Answer:

1 for and 5

Ex

Study island

Answer: Pounds per Cubic inch(lb/in3)

Answer:

Greenhouse gases such as carbon dioxide and water vapor make an atmosphere around the earth and make less heat escape

Explanation:

Winds are always named from the direction it blows from

Uneven heating of Earth's surface,in turn,causes differences in air pressure at various locations. Heated air rises,creating an area of low pressure beneath. Cooler air descends, creating an area of high pressure

Answer:

A

Explanation:

Answer:c

Explanation:

Answer:

fermentation

Explanation:

o advance counterterrorism efforts in other countries

Answer:

D

Explanation:

E2020

Answer: Gold is shiny and bright just like the sun. Gold is yellow.

Explanation:

Answer:

The molecules in a solid are stuck in a specific structure or arrangement of atoms. The atoms still vibrate and the electrons fly around in their orbitals, but the entire atom will not change its position.

Answer:

The correct answer is The pressure of the gas will increase

The volume of the gas will increase

Explanation:

Step 1: Data given

The gas in a container is heated, this means the temperature increases

Suppose we start with a temperature of 100 K and a pressure of 1 atm and a volume of 1L

Step 2:

V1/T1= V2/T2

⇒V1 = the initial  volume = 1L

⇒T1 = the initial temperature = 100 K

⇒V2 = the new volume = TO BE DETERMINED

⇒T2 = the increased temperature = 200 K

1/100 = V2 / 200

V2 = 2 L

This means when the temperature increases, the volume will increase

P1/T1 = P2/T2

⇒P1 = the initial pressure = 1 atm

⇒T1 = the initial temperature = 100 K

⇒P2 = the new pressure = TO BE DETERMINED

⇒T2 = the increased temperature = 200 K

1/100 = P2 / 200

P2 = 2 atm

This means when the temperature increases, the pressure will increase

The correct answer is The pressure of the gas will increase

The volume of the gas will increase

Answer:

The planets themselves are composed of several trillions or quadrillions or more atoms. As far as hard science is concerned, it would be really hard to picture them as electrons. Conclusion: It can be said with a great accuracy that our planets are NOT huge electrons.

Rutherford's experiments showed that the mass of atoms was mostly concentrated in a very small region, with charge equal to the atomic number- the nucleus. He absolutely did not show, nor is it true, that electrons orbit the nucleus as if they were planets. That was a guess people made in trying to figure out how to picture the atom.

(Hope this helps) Sky

Answer:

Option C

Explanation:

Dipole moment being ac vector quantity has both magnitude and direction. All bonding forces have dipole moment ranging from partially positive to negative moment.  

Net dipole moment is the dipole moment arising after summation of all the existing dipole moments. On the basis of dipole moment it is determined whether the molecule is polar or non polar.  

Hence, option c is correct

Answer:c

Explanation:

Answer: Diamonds were first discovered and mined in India over 2,400 years ago.

Explanation: Over time, diamonds were found in many other areas around the world, including many in Africa. In today's trade, Africa, Russia, Australia, and Canada produce the most diamonds.

~Wonderopolis

Answer:

Diamonds are formed when under the heat and pressure of the earth's gravity.  Diamonds have to be underground to be formed so they should be underground. Digging to Y11 is deep enough to find diamonds .

Answer:

As the temperature of a sample of gas falls from 45.0ºC to 30.0ºC, its pressure falls to 300.

Explanation:

Answer:

Problem,  Variables,  Hypothesis,  Research,  Procedure,  Data, Conclusion.

Explanation:

First, you have to know what the problem that you're talking about is. Then, you have to know the independent, dependent, and controlled variables are in order to make a hypothesis. Then do research about the topic. After that, you make the procedure your experiment, if that's what your doing. Then after the experiment, you find the data. Using that data, you make a conclusion.

Answer:

all of them except number 2

Explanation:

Answer:

1,3,4,5  the other perosn is correct

Explanation: That what my quiz said

Answer:

There are 0.12269 Liters of Iron

Explanation:

First, by means of the molecular weight equation, the grams of iron corresponding to 17.3 moles can be calculated:

[tex]MW=\frac{mass(grams)}{moles}[/tex]

[tex]mass=MW*moles=55.845\frac{g}{mol} *17.3mol=966.119 g[/tex]

Then using the density equation the iron milliters are calculated:

[tex]d=\frac{mass(g)}{volume(mL)}[/tex]

[tex]volume=\frac{mass}{density}=\frac{966.119g}{7.874\frac{g}{mL} } =122.69 mL[/tex]

Milliliters to liters are converted:

122.69 mL = 0.12269 L of Iron.

Answer:

[tex]V_{Fe}=0.125L[/tex]

Explanation:

Hello,

In this case, given the moles of iron, we need to use it atomic mass (55.845  g/mol) and density (7.874 g/cm³) in order to firstly convert from moles to grams and secondly from grams to cubic centimetres:

[tex]V_{Fe}=17.6molFe\times \frac{55.845gFe}{1molFe}*\frac{1cm^3}{7.874gFe}=124.8cm^3[/tex]

Finally, we obtain the volume in litres by:

[tex]V_{Fe}=124.8cm^3*\frac{1L}{1000cm^3} \\\\V_{Fe}=0.125L[/tex]

Best regards.

Answer:

b

Explanation:

hope it helps

Answer:

0.479 M or mol/L

Explanation:

So Molarity is moles/litres of solution...often written as M=mol/L

So here we are given grams of BaCl2 which we have to convert to moles. To convert to moles of BaCl2 we have to divide 63.2 g BaCl2 by molar mass of BaCl2 which is 208.23 g/mol so you get 63.2/208.23 = 0.3035 moles of BaCl2

Second step is converting the 634mL to litres by simply dividing by 1000 because we know 1 litre has 1000ml so 634/1000 = 0.634L

Now we just plug these guys in our molarity formula M=mol/L

M= 0.3035/0.634 = 0.479 M or mol/L

Answer:

Interestingly enough, I'm not getting

0.0341% w/v

either. Here's why.

Start by calculating the percent composition of chlorine,

Cl

, in calcium chloride, This will help you calculate the mass of chloride anions,

Cl

−

, present in your sample.

To do that, use the molar mass of calcium chloride, the molar mass of elemental chlorine, and the fact that

1

mole of calcium chloride contains

2

moles of chlorine atoms.

2

×

35.453

g mol

−

1

110.98

g mol

−

1

⋅

100

%

=

63.89% Cl

This means that for every

100 g

of calcium chloride, you get

63.89 g

of chlorine.

As you know, the mass of an ion is approximately equal to the mass of the neutral atom, so you can say that for every

100 g

of calcium chloride, you get

63.89 g

of chloride anions,

Cl

−

.

This implies that your sample contains

0.543

g CaCl

2

⋅

63.89 g Cl

−

100

g CaCl

2

=

0.3469 g Cl

−

Now, in order to find the mass by volume percent concentration of chloride anions in the resulting solution, you must determine the mass of chloride anions present in

100 mL

of this solution.

Since you know that

500 mL

of solution contain

0.3469 g

of chloride anions, you can say that

100 mL

of solution will contain

100

mL solution

⋅

0.3469 g Cl

−

500

mL solution

=

0.06938 g Cl

−

Therefore, you can say that the mass by volume percent concentration of chloride anions will be

% m/v = 0.069% Cl

−

−−−−−−−−−−−−−−−−−−−

I'll leave the answer rounded to two sig figs, but keep in mind that you have one significant figure for the volume of the solution.

.

Explanation:

Answer:

D. using a solid with a high surface area in the reactants, is your correct answer.

Explanation:

Using a solid with a high surface area in the reactants is usually associated with a higher reaction rate.