The pH of an acid solution is 5.82. Calculate the Ka for the monoprotic acid. The initial acid concentration is 0.010 M.

Answer:

a. In the nickel-aluminum galvanic cell, the cathode is nickel electrode.

b. Therefore electrons flow from the aluminium electrode to the nickel electrode.

c. The aluminium electrode loses mass, while the nickel electrode electrode gains mass.

Explanation:

Voltaic or galvanic cells are electrochemical cells in which spontaneous oxidation-reduction reactions. The two halves of the redox reaction are separate and electron transfer is required to occur through an external circuit for the redox reaction to take place. That is, one of the metals in one of the half cells is oxidized while the metal of the other half cell is reduced, producing an exchange of electrons through an external circuit. This makes it possible to take advantage of the electric current.

Given:

E ⁰N i ⁺² = − 0.23 V   is the standard reduction potential for the nickel ion

E ⁰  A l ⁺³ =  − 1.66  V  is the standard reduction potential for the aluminum ion

The most negative potentials  correspond to more reducing substances. In this case, the aluminum ion is the reducing agent, where oxidation takes place. In the anodic half cell oxidations occur, while in the cathode half cell reductions occur. So the aluminum cell acts as the anode while the nickel cell acts as the cathode.

So a. In the nickel-aluminum galvanic cell, the cathode is nickel electrode.

The metal that is oxidized gives electrons to the metal that is reduced through the outer conductor. Then the electrons flow spontaneously from the anode to the cathode.

Then b. Therefore electrons flow from the aluminium electrode to the nickel electrode.

Ni⁺², being the cathode, accepts electrons, becoming Ni (s) and depositing on the Ni electrodes.

So, c. The aluminium electrode loses mass, while the nickel electrode electrode gains mass.

Answer:

THE FINAL TEMPERATURE OF WATER IS -4.117 °C

Explanation:

Mass of the aluminium = 50 g

c = 0.88 J/g C

Initial temperature of aluminium = 225 °C

Volume of water = 100 ml

Density of water = 1 g/ml

Mass of water = density * volume of water

Mass of water = 1 * 100 = 100 g of water

Initial temperature of water = 20 C

It is worthy to note that the heat of a system is constant and conserved as no heat is lost or gained by a closed system,

So therefore,

heat lost by aluminium = heat gained by water

H = mass * specific heat capacity * temeprature change

So:

m c ( T2- T1) = m c (T2-T1)

50 * 0.88 * ( T2 - 225) = 100 * 4.18 *( T2 - 20)

44 ( T2 - 225 ) = 418 ( T2 - 20)

44 T2 - 9900 = 418 T2 - 8360

-9900 + 8360 = 418 T2 - 44 T2

-1540 = 374 T2

T2 = - 4.117

So therefore the final temperature of water is -4.117 °C

Answer:

Jesseca Kusher, an 18-year-old researcher from Spartansburg, S.C., invented a paint-on coating for roofing shingles. Her formula could reduce a home's cooling costs and possibly cut ozone pollution in urban areas...

SUPPORT ME ...........

Answer:

Jesseca created mixtures containing graphite, gypsum, and mica that could be painted on roof shingles.

Explanation:

Hope this helped!!

Answer:

K2CO3  and NaF

Explanation:

In order to ascertain which salt would form a basic solution we have to identify the classification of each of the salts.

- NH4Br: is the salt of a weak base (NH3) and a strong acid (HBr). This means that it would form an acidic solution.

- Pb(NO3): This is a normal salt, hence would not form a basic solution.

-  K2CO3: This is salt that forms a strongly alkaline/basic solution.

- NaF: it is the salt of a strong base, NaOH, and a weak acid, HF. This means this would form a basic solution.

The compounds capable to form basic solutions are[tex]\rm \bold {K_2CO_3 }[/tex] and NaF. Thus, options C and D are correct.

The basic solution has been given with the presence of a high number of hydroxide ions, while the acidic solution has been the presence of hydrogen ions.

The solution has been considered as basic when the compound has been constituted of a strong base. The constituents of the following compounds have been:

The compounds capable to form basic solutions are[tex]\rm \bold {K_2CO_3 }[/tex] and NaF. Thus, options C and D are correct.

For more information about the basic solution, refer to the link:

https://brainly.com/question/3595168

Answer:

The smallest whole-number coefficient for OH⁻ is 2

Explanation:

Step 1: The equation redox reaction is divided into two half equations

Reduction half equation: MnO₄⁻  ----> MnO₂

Oxidation half-equation: I⁻  ---> IO₃⁻

Step 2: Next the atoms are balanced by adding OH⁻ ions and H₂O molecules to the appropriate side of each half equation;

MnO₄⁻ +  2H₂O ----> MnO₂ + 4OH⁻

I⁻ + 6OH⁻ ---> IO₃⁻ + 3H₂O

Step 3 : The charges are then balanced by adding electrons to the appropriate sides of each half equation

MnO₄⁻ +  2H₂O + 3e⁻ ----> MnO₂ + 4OH⁻

I⁻ + 6OH⁻ ---> IO₃⁻ + 3H₂O + 6e⁻

Step 4: Oxidation half equation is multiplied by 2 while reduction half equation is multiplied by 1 to balance the number of electrons gained and lost for the reaction

2MnO₄⁻ +  4H₂O + 6e⁻ ----> 2MnO₂ + 8OH⁻

I⁻ + 6OH⁻ ---> IO₃⁻ + 3H₂O + 6e⁻

Step 5 : addition of the two half equations to yield a net ionic equation

2MnO₄⁻  + I⁻ + H₂O ----> 2MnO₂ + IO₃⁻ + 2OH⁻

The smallest whole number coefficient for OH⁻ is 2

A redox reaction is divided into two half equations which are shown below:

Reduction half equation: MnO₄⁻  ----> MnO₂

Oxidation half-equation: I⁻  ---> IO₃⁻

Atoms are balanced by adding OH⁻ ions and H₂O molecules to the appropriate side of each half equation to make the equation complete ;

MnO₄⁻ +  2H₂O ----> MnO₂ + 4OH⁻

I⁻ + 6OH⁻ ---> IO₃⁻ + 3H₂O

The charges needs to be balanced and this is done by adding electrons to the appropriate sides of each half equation

MnO₄⁻ +  2H₂O + 3e⁻ ----> MnO₂ + 4OH⁻

I⁻ + 6OH⁻ ---> IO₃⁻ + 3H₂O + 6e⁻

The equation needs to be balanced by multiplying the oxidation half equation by 2 while reduction half equation is multiplied by 1 to balance the number of electrons on both sides of the equations.

2MnO₄⁻ +  4H₂O + 6e⁻ ----> 2MnO₂ + 8OH⁻

I⁻ + 6OH⁻ ---> IO₃⁻ + 3H₂O + 6e⁻

The two half equations are then added and written together to form a net ionic equation

2MnO₄⁻  + I⁻ + H₂O ----> 2MnO₂ + IO₃⁻ + 2OH⁻

The smallest whole-number coefficient for OH⁻ is therefore 2.

Read more on https://brainly.com/question/17156617

Answer:

  30. 5 planes are shown

  31. 1 plane

  32. CEF

  33. on line AB

  34. E or F

   35. ABCD or BCEF or CDEF or ACEF

Explanation:

30. Each of the surfaces of the rectangular pyramid is a plane. There are 5 planes.

__

31. 3 points define one plane only.

__

32. The only points shown on the same line segment are points E, F, and C.

__

33. If G is to be collinear with A and B, it must lie on line AB.

__

34. The only points shown that are not on plane N are points E and F. Either of those will do.

__

35. There are three planes that have 4 points shown on them. The four points that are on the same plane are any of ...

Plane ACEF is not shown on the diagram, but we know that those 4 points are also coplanar. (Any point not on line CE, together with the three points on that line, will define a plane with 4 coplanar points.)

answer should be 1.4 cm³

1 L = 10 and so

dL = 100 and then

cL = 1,000

mL = 0.001 m³

1 m³ = 1,000

dm³ = 1,000,000

cm³ = 1,000,000,000

mm³ = 1,000 L

So, 1 mL = 1 cm³ = 0.001 L = 0.1 cL

1,400 mL = 1,400 cm³ = 1.4 L = 140 cL

Answer:

1.4 cm^3

Explanation:

Answer:

The sun

Explanation:

The sun is the primary source of energy in most living communities. The producers or the green plants that prepare their own food by the use of sunlight and other natural resources. Carbon dioxide, water, and other minerals are used by the plants to make their food in the presence of chlorophyll. Plants are then consumed by the consumers. This chain helps in forming the food chain and the food web.

Answer:

Here are four possible voltaic cells.  

Explanation:

1. Standard reduction potentials

                                         E°/V

I₂(s) + 2e⁻ ⟶ 2I⁻(aq);        0.54

Cu²⁺(aq) + 2e⁻ ⟶ Cu(s);   0.34

Fe²⁺(aq) + 2e⁻ ⟶ Fe(s);   -0.41

Zn²⁺(aq) + 2e⁻ ⟶ Zn(s);   -0.76

2. Possible Voltaic cells

(a) Zn/I₂

                                                                       E°/V

Anode:     Zn(s) ⟶ Zn²⁺(aq) + 2e⁻;                 0.76

Cathode:  I₂(s) + 2e⁻ ⟶ 2I⁻(aq);                     0.54

Cell:         Zn(s) +  I₂(s) ⟶  Zn²⁺(aq) + 2I⁻(aq); 1.30

Zn(s)|Zn²⁺(aq)∥I⁻(aq)|I₂(s)|C(s, graphite)

Zn is the anode; graphite is the cathode.

(b) Zn/Cu²⁺

                                                                          E°/V

Anode:     Zn(s) ⟶ Zn²⁺(aq) + 2e⁻;                    0.76

Cathode:  Cu²⁺(aq) + 2e⁻ ⟶ Cu(s);                  0.34

Cell:          Zn(s) +  Cu²⁺(s) ⟶  Zn²⁺(aq) + Cu(s); 1.10

Zn(s)|Zn²⁺(aq)∥Cu²⁺(aq)|Cu(s)

Zn is the anode; Cu is the cathode.

(c) Zn/Fe²⁺

                                                                            E°/V

Anode:     Zn(s) ⟶ Zn²⁺(aq) + 2e⁻;                     0.76

Cathode:  Fe²⁺(aq) + 2e⁻ ⟶ Fe(s);                    -0.41

Cell:          Zn(s) +  Fe²⁺(s) ⟶  Zn²⁺(aq) + Fe(s);  0.35

Zn(s)|Zn²⁺(aq)∥Fe²⁺(aq)|Fe(s)

Zn is the anode; Fe is the cathode.

(d) Fe/I₂

                                                                         E°/V

Anode:     Fe(s) ⟶ Fe²⁺(aq) + 2e⁻;                   0.41

Cathode: I₂(s) + 2e⁻ ⟶ 2I⁻(aq);                     0.54

Cell:         Zn(s) +  I₂(s) ⟶  Zn²⁺(aq) + 2I⁻(aq); 0.95

Fe(s)|Fe²⁺(aq)∥I⁻(aq)|I₂(s)|C(s, graphite)

Fe is the anode; graphite is the cathode.

Answer:

1. pH = 2.98

2. pH = 4.02

3. pH = 8.12

Explanation:

1. Initial molarity of benzoic acid (Molar mass: 122.12g/mol; Ka = 6.14x10⁻⁵) is:

0.235 ₓ (1mol / 122.12g) = 1.92x10⁻³ moles / 0.100L = 0.01924M

The equilibrium of benzoic acid with water is:

C6H5CO2H(aq) + H2O(l) → C6H5O-(aq) + H3O+(aq)

And Ka is defined as the ratio between equilibrium concentrations of products over reactants, thus:

Ka = 6.14x10⁻⁵ = [C6H5O⁻] [H3O⁺] / [C6H5CO2H]

The benzoic acid will react with water until reach equilibrium. And equilibrium concentrations will be:

[C6H5CO2H] = 0.01924 - X

[C6H5O⁻] = X

[H3O⁺] = X

Replacing in Ka:

6.14x10⁻⁵ = [X] [X] / [0.01924 - X]

1.1815x10⁻⁶ - 6.14x10⁻⁵X = X²

1.1815x10⁻⁶ - 6.14x10⁻⁵X - X² = 0

Solving for X:

X = -0.0010→ False solution. There is no negative concentrations

X = 0.0010567M → Right solution.

pH = - log [H3O⁺] and as [H3O⁺] = X:

pH = - log [0.0010567M]

2.

pH of a buffer is determined using H-H equation (For benzoic acid:

pH = pka + log [C6H5O⁻] / [C6H5OH]

pKa = -log Ka = 4.21 and [] could be understood as moles of each chemical

The benzoic acid reacts with NaOH as follows:

C6H5OH + NaOH → C6H5O⁻ + Na⁺ + H₂O

That means NaOH added = Moles C6H5O⁻ And C6H5OH = Initial moles (1.92x10⁻³ moles - Moles NaOH added)

7.00mL of NaOH 0.108M are:

7x10⁻³L ₓ (0.108 mol / L) = 7.56x10⁻⁴ moles NaOH = Moles C₆H₅O⁻

And moles C6H5OH = 1.92x10⁻³ moles - 7.56x10⁻⁴ moles = 1.164x10⁻³ moles C₆H₅OH

Replacing in H-H equation:

pH = 4.21 + log [7.56x10⁻⁴ moles] / [ 1.164x10⁻³ moles]

3. At equivalence point, all C6H5OH reacts producing C6H5O⁻. The moles are 1.164x10⁻³ moles

Volume of NaOH to reach equivalence point:

1.164x10⁻³ moles ₓ (1L / 0.108mol) = 0.011L. As initial volume was 0.100L, In equivalence point volume is 0.111L and concentration of C₆H₅O⁻ is:

1.164x10⁻³ moles / 0.111L = 0.01049M

Equilibrium of  C₆H₅O⁻ with water is:

C₆H₅O⁻(aq) + H₂O(l) ⇄  C₆H₅OH(aq) + OH⁻(aq)

Kb = [C₆H₅OH] [OH⁻]/ [C₆H₅O⁻]

Kb = kw / Ka = 1x10⁻¹⁴ / 6.14x10⁻⁵ = 1.63x10⁻¹⁰

Equilibrium concentrations of the species are:

C₆H₅O⁻ = 0.01049M - X

C₆H₅OH = X

OH⁻ = X

Replacing in Kb expression:

1.63x10⁻¹⁰ = X² / 0.01049- X

1.71x10⁻¹² - 1.63x10⁻¹⁰X - X² = 0

Solving for X:

X = -1.3x10⁻⁶ → False solution

X = 1.3076x10⁻⁶ → Right solution

[OH⁻] =  1.3076x10⁻⁶

as pOH = -log [OH⁻]

pOH = 5.88

And pH = 14 - pOH

Answer:

Each energy sublevel contains a different number of electrons. For example, sublevel D can contain up to 10 electrons

Explanation:

The atoms are surrounded by propellers that within each propeller there is a certain number of electrons, these electrons jump from orbit to orbit according to the amount of energy they have. The four levels that make up the electronic cloud that surrounds an atom are: s p d f.

When these electrons change orbit or level they release energy in the form of light, which is known as a photon.

Answer:

B. 1-amino-2-methylpentan-2-ol

Explanation:

In this case, the first step, we have the attack of the nucleophile cyanide ([tex] CN^-[/tex] produced by sodium cyanide to the carbon on the carbonyl group (C=O) producing a negative charge in the oxygen.

Then HCl protonates the molecule to produce a cyanohydrin. This cyanohydrin can be reduced by the action of hydrogen gas ([tex]H_2[/tex]) in the presence of a catalyst ([tex]Pd[/tex]), producing an amino group. With this in mind, the final molecule is: 1-amino-2-methylpentan-2-ol.

See figure 1 to further explanations

I hope it helps!

Answer:

36.7 mg

Explanation:

The following data were obtained from the question.

Original amount (A₀) = 65.1 mg

Rate constant (K) = 2.47×10¯² years¯¹

Time (t) = 23.2 years

Amount of substance remaining (A) =?

Thus, we can obtain the amount of substance remaining after 23.2 years as follow

ln A = lnA₀ – Kt

lnA = ln(65.1) – (2.47×10¯² × 23.2)

lnA = 4.1759 – 0.57304

lnA = 3.60286

Take the inverse of ln

A = e^3.60286

A = 36.7 mg

Therefore, the amount remaining after 23.2 years is 36.7 mg.

Answer:

True

Explanation:

In pi bonds, the electron density concentrates itself between the atoms of the compound but are present on either side of the line joining the atoms. Electron density is found above and below the plane of the line joining the internuclear axis of the two atoms involved in the bond.

Pi bonds usually occur by sideways overlap of atomic orbitals and this leads to both double and triple bonds.

Answer:

Following are the explanation to this question:

Explanation:

The salts of carboxylate are named by the writing, which is also named as the creation of the first, which is followed by the name of the carboxylic acid were '-ic' of the acid end and replaced by the 'ate'.

Following are the description of the given reaction:

In reaction A:

2-Bromopropanoic acid= [tex]C_3H_5BrO_2[/tex]

[tex]C_3H_5BrO_2+NaOH[/tex]⇄ [tex]C_3H_4BrNaO_2 +H_2O[/tex]

The IUPAC name is Sodium-2-Bromopropanate

In reaction B:

2-Methylhexanoic acid= [tex]C_7H_{14}O_2[/tex]

[tex]C_7H_{14}O_2+NaOH[/tex]⇄ [tex]C_7H_{13}NaO_{2}+H_2O[/tex]

The IUPAC name is Sodium-2-Methyl hexanoate

The IUPAC name of compound  is Sodium-2-Bromopropanate in reaction 1 and in reaction 2 it is 2-Methylhexanoic acid.

The salts of carboxylate are named by the writing, which is also named as the creation of the first, which is followed by the name of the  compound carboxylic acid were '-ic' of the acid end and replaced by the 'ate'.

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.

Thus, the IUPAC name of compound  is Sodium-2-Bromopropanate in reaction 1 and in reaction 2 it is 2-Methylhexanoic acid.

Learn more about compound,here:

https://brainly.com/question/14117795

#SPJ6

Answer:

D) 65.7%

Explanation:

Based on the reaction:

2H2(g)+O2(g)⟶2H2O(l)

2 moles of hydrogen produce 2 moles of water assuming an excess of oxygen.

To find percent yield of the reaction we need to find theoretical yield (The yield assuming all hydrogen reacts producing water). With theoretical yield and actual yield (32.8g H₂O) we can determine percent yield as 100 times the ratio between actual yield and theoretical yield.

Theoretical yield:

Moles of 5.58g H₂:

5.58g H₂ ₓ (1 mol / 2.016g) = 2.768 moles H₂

As 2 moles of H₂ produce 2 moles of H₂O, if all hydrogen reacts will produce 2.768 moles H₂O. In grams:

2.768 moles H₂O ₓ (18.015g / mol) =

49.86g H₂O is theoretical yield

Percent yield:

Percent yield = Actual yield / Theoretical yield ₓ 100

32.8g H₂O / 49.86g ₓ 100 =

65.7% is percent yield of the reaction

Answer:

Lime water, [tex]Ca(OH)_{2}_({aq} )[/tex] is formed.

Explanation:

Lime-water is a clear and colourless dilute solution of aqueous calcium hydroxide salt.

Small amounts of calcium hydroxide salt,  [tex]Ca(OH)_{2}_(s)[/tex]  is sparsely soluble at room temperature when dispersed vigorously. if in excess, a white suspension called 'milk of lime'is formed.

I hope this explanation is helpful.

Answer:

d. 8 moles of H2O on the product side

Explanation:

Hello,

In this case, we need to balance the given redox reaction in acidic media as shown below:

[tex]MnO_4^{1-} (aq) + Cl^{1-} (aq) \rightarrow Mn^{2+} (aq) + Cl_2 (g)\\\\(Mn^{7+}O^{2-}_4)^{1-} (aq) + Cl^{1-} (aq) \rightarrow Mn^{2+} (aq) + Cl_2 (g)\\\\\\\\(Mn^{7+}O^{2-}_4)^{1-} (aq)+8H^++5e^- \rightarrow Mn^{2+}+4H_2O\\\\2Cl^{1-}\rightarrow Cl_2^0+2e^-\\\\2*[(Mn^{7+}O^{2-}_4)^{1-} (aq)+8H^++5e^- \rightarrow Mn^{2+}+4H_2O]\\\\5*[2Cl^{1-}\rightarrow Cl_2^0+2e^-]\\\\\\\\2(Mn^{7+}O^{2-}_4)^{1-} (aq)+16H^++10e^- \rightarrow 2Mn^{2+}+8H_2O\\\\10Cl^{1-}\rightarrow 5Cl_2^0+10e^-\\[/tex]

Then, we add the half reactions:

[tex]2(Mn^{7+}O^{2-}_4)^{1-} (aq)+16H^++10Cl^{1-} \rightarrow 2Mn^{2+}+8H_2O+5Cl_2^0[/tex]

Thereby, we can see d. 8 moles of H2O on the product side.

Best regards.

Answer:

[tex]r_A=-1\frac{M}{s}[/tex]

Explanation:

Hello,

In this case, given the rate of production of C, we can compute the rate of consumption of A by using the rate relationships which include the stoichiometric coefficients at the denominators (-1 for A and 2 for C) as follows:

[tex]\frac{1}{-1} r_A=\frac{1}{2}r_C[/tex]

In such a way, solving the rate of consumption of A, we obtain:

[tex]r_A=-\frac{1}{2} r_C=-\frac{1}{2}*2\frac{M}{s}\\ \\r_A=-1\frac{M}{s}[/tex]

Clearly, such rate is negative which account for consumption process.

Regards.

Explanation:

To obtain the empirical and molecular formula of this compound from the percent composition of the elements, we follow the steps below;

Step 1: Divide the percentage composition by the atomic mass

Sulphur = 31.42 / 32 = 0.9819

Oxygen = 31.35 / 16 = 1.9594

Flourine = 37.23 / 19 = 1.9595

Step 2: Divide by the lowest number

Sulphur = 0.9819 / 0.9819 = 1

Oxygen = 1.9594 / 0.9819 ≈ 2

Flourine = 1.9595 / 0.9819 ≈ 2

This means the ratio of the elements is 1 : 2: 2

The empirical formular (simplest formular of a compound) of the compound is;

SO₂F₂

To obtain the molecular formular (Actual formular of a compound);

(SO₂F₂)n = 102.1

Inserting the atomic masses and solving for n;

(102)n = 102.1

n ≈ 1

The molecular formular is; (SO₂F₂)₁ = SO₂F₂

Answer:

a. Cyclohexanone

Explanation:

The principle of IR technique is based on the vibration of the bonds by using the energy that is in this region of the electromagnetic spectrum. For each bond, there is a specific energy that generates a specific vibration. In this case, you want to study the vibration that is given in the carbonyl group C=O. Which is located around 1700 cm-1.

Now, we must remember that the lower the wavenumber we will have less energy. So, what we should look for in these molecules, is a carbonyl group in which less energy is needed to vibrate since we look for the molecule with a smaller wavenumber.

If we look at the structure of all the molecules we will find that in the last three we have heteroatoms (atoms different to carbon I hydrogen) on the right side of the carbonyl group. These atoms allow the production of resonance structures which makes the molecule more stable. If the molecule is more stable we will need more energy to make it vibrate and therefore greater wavenumbers.

The molecule that fulfills this condition is the cyclohexanone.

See figure 1

I hope it helps!

Answer:

5.90

Explanation:

Initial moles of CH3COO- = 10.0/1000 x 0.75 = 0.0075 mol

Moles of HCl added = 5.0/1000 x 0.10 = 0.0005 mol

CH3COO- + HCl => CH3COOH + Cl-

Moles of CH3COO- left = 0.0075 - 0.0005 = 0.007 mol

Moles of CH3COOH formed = moles of HCl added = 0.0005 mol

pH = pKa + log([CH3COO-]/[CH3COOH])

= -log Ka + log(moles of CH3COO-/moles of CH3COOH)

= -log(1.78 x 10^(-5)) + log(0.007/0.0005)

= 5.90

Answer:

The correct answer is 5.895.

Explanation:

The reaction will be,

CHCOO⁻ + H+ ⇔ CH₃COOH

Both the HCl and the acetate are having one n factor.

The millimoles of CH₃COO⁻ is,

= Volume in ml × molarity = 10 × 0.75 = 7.5

The millimoles of HCl = Volume in ml × molarity = 5 × 0.1 = 0.5

Therefore, 0.5 will be the millimoles of CH₃COOH formed, now the millimoles of the CH₃COO⁻ left will be, 7.5-0.5 = 7.0

The volume of the solution is, 10+5 = 15 ml

The molarity of CH₃COO⁻ is, millimoles / volume in ml = 7/15

The molarity of CH₃COOH is 0.5/15

pH = pKa + log[CH₃COO⁻]/[CH₃COOH]

= 4.74957 + 1.146

= 5.895

CHECK COMPLETE QUESTION BELOW

At a given temperature the vapor pressures of benzene and toluene are 183 mm Hg and 59.2 mm Hg, respectively. Calculate the total vapor pressure over a solution of benzene and toluene with Xbenzene = 0.580.

Answer:

The total vapor pressure is [tex]81.3 mmHg[/tex]

Explanation:

We will be making use of Dalton and Raoults equation in order to calculate the total pressure,

Which is [tex]PT= (PA × XA) +(PB ×XB)[/tex]

PT= total vapor pressure

From the question

Benene's Mole fraction = 0.580

then to get Mole fraction of toluene we will substract the one of benzene from 1. because total mole fraction is always 1.

= (1 - 0.580) = 0.420

Vapor pressure of benzene given = 183 mmHg

Vapor pressure of toluene given= 59.2 mmHg

If we substitute those value into above equation, we have

PT=(183×0.580)+(59.2×0.420)

=81.3mmHg

Therefore,, the total vapor pressure of the solution is 81.3 mmHg

Answer:

0.14%

Explanation:

The computation of % is shown below:

As we know that

     HClO <=> H+ + ClO-

I         0.015          0      0

C          -a            +a     +a

E      0.015-a        a       a

Now

[tex]Ka = \frac{[H+][ClO-]}{[HClO]}[/tex]

[tex]= \frac{a^{2}}{(0.015 - a)} \\\\= 3.0 \times 10^{-8}[/tex]

[tex]a^{2} + 3.0 \times 10^{-8}a - 4.5 \times 10^{-10} = 0[/tex]

Now Solves the quadratic equation i.e.

[tex]a = 2.120 \times 10^{-5}[/tex]

[tex][H+] = a = 2.120 \times 10^{-5} M[/tex]

So,

% ionization is

[tex]= \frac{[H+]}{[HClO]}_{initial} \times 100\%\\\\= 2.120 \times 10^{-5}\div0.015 \times 100\%[/tex]

= 0.14%

Hence, the percentage of hypochlorous ionization is 0.14%

Answer:

The scientist is observing an intensive property of a superconductor.

Explanation:

An intensive property is a bulk property of matter. This means that an intensive property does not depend on the amount of substance present in the material under study. Typical examples of intensive properties include; conductivity, resistivity, density, hardness, etc.

An extensive property is a property that depends on the amount of substance present in a sample. Extensive properties depend on the quantity of matter present in the sample under study. Examples of extensive properties include, mass and volume.

Resistance of a superconducting material has nothing to do with the amount of the material present hence it is an intensive property of the superconductor.

Answer:

The scientist is observing an intensive property of a superconductor.

Explanation:

its the only one that makes logical sense

Answer:

n = 0.207 mole

Explanation:

We have,

P = 1 atm

V = 5 liter

R = 0.0821 L.atm/mol.K

T = 293 K

We need to find the value of n. The relation is as follows :

PV = nRT

Solving for n,

[tex]n=\dfrac{PV}{RT}\\\\n=\dfrac{1\times 5}{0.0821 \times 293}\\\\n=0.207\ \text{mol}[/tex]

So, the value of n is 0.207 mol.

Answer:

Explanation:

[tex]H_3O^+[/tex] also known as hydronium ion is formed as a result of the reaction between an hydrogen proton and a water molecules.

i.e [tex]\mathtt{H^+ + H_2O \to H_3O^+}[/tex]

(molecular geometry for the hydronium ion shows that the lewis structure of hydronium ion possess a three hydrogen ion bonded to a central atom known as oxygen. The oxygen possess a lone pair with a positive ion. So we have three hydrogen atoms and a lone pair attached to the oxygen. We can now say that there are four groups as the steric number in which one of them is a lone pair. This give rise to the trigonal pyramidal shape of the [tex]H_3O^+[/tex] (hydronium ion) with a bond angle of about 109,5°

Similarly, [tex]NH_3[/tex] on the other hand also known as ammonia has a shape that can be also determined by the Lewis structure.

IN ammonia,  there are three hydrogen  and a lone pairs of electron spreading out as far away from each other  from the centre nitrogen. In essence, the valence shell electron pair around hydrogens tend to repel each other. Hence, giving it a trigonal pyramidal shape.

From above the similarities between H3O and NH3 is in their molecular geometry in which both  H3O and NH3 have the same shape.

These molecules are called isoelectronic. Why?

Isoelectronic molecules are molecules having the same number of electrons and same electronic configuration  structure. As a result H3O and NH3 possess the same  number of electrons in the same orbitals and they also posses the same structure.

Answer:

The liquid that is often used in thermometers is chrome.

It is khwon for raising its volule when the temperature raises and vice-versa. ● the temperature and the volume are proprtional to each other so using Mathematics, scientists have figured out a way to benefit from it to make a thermometer.

Answer:

Ka = 6.87x10⁻⁵

Explanation:

The equilibrium of benzoic acid in water is:

C₆H₅COOH(aq) + H₂O(l) ⇄ C₆H₅COO⁻(aq) + H₃O⁺(aq)

The equilibrium constant, Ka, is:

Ka = [C₆H₅COO⁻] [H₃O⁺] / [C₆H₅COOH]

The initial concentration of benzoic acid is 0.425M. In equilibrium its concentration is 0.425M - X and [C₆H₅COO⁻] [H₃O⁺] = X.

X is the reaction coordinate. How many acid produce C₆H₅COO⁻ and H₃O⁺ until reach equilibrium.

Concentrations in equilibrium are:

pH is defined as -log [H₃O⁺]. As pH = 2.270

2.270 = -log [H₃O⁺]

10^-2.270 = [H₃O⁺]

5.37x10⁻³M = [H₃O⁺] = X.

Replacing, concentrations in equilibrium are:

[C₆H₅COOH] = 0.425M - 5.37x10⁻³M = 0.4196M

[C₆H₅COO⁻] = 5.37x10⁻³M

[H₃O⁺] = 5.37x10⁻³M

Ka = [5.37x10⁻³M] [5.37x10⁻³M] / [0.4196M]