The pH of a certain orange juice is 3.33.Calculate the +ion concentration.

Answer:

See explanation

Explanation:

TLC is a chromatographic method in which the solute is spotted on a plate and the plate is placed in an air tight chamber containing a solvent. The solvent is maintained below the level of the spot. The capillary movement of the solvent through the plate achieves the required separation.

If two spots have Rf values of 0.25 and 0.26 respectively and then the plate was removed from the developing chamber, subsequently, the residual solvent was allowed to evaporate from the plate, and then the plate was returned to the developing chamber.

It will be observed after the second development is complete that the new Rf values will be 0.50 and 0.52 respectively. It will just be as though the second chromatogram picked up from where the first chromatogram stopped.

Answer:

Add some water to his solution

Explanation:

Ion pair effect refers to strong electrostatic interaction between oppositely charged ions in solution. Such strong interaction affects solute- solvent interaction when an ionic substance is dissolved in water.

High solute concentration may lead to ion-pair effect. Hence, the ion pair effect may be minimized by adding more water (decreasing the concentration of the solution).

To reduce the ion- pair effect, Andy needs to add some water to his solution (dilution).

The activity that would reduce the ion-pairing effect in his AICI₃ solution is : ( B ) add some water to his solution

Ion pair effect is a strong electrostatic interaction seen between ions with opposite charges, when an ionic substance is been dissolved in a solvent such as water this effect will affect the dissolution of the substance.

High concentration of the solute in a solution also leads to the ion pair effect therefore for Andy to reduce the ion-pairing effect in his solution he has to add more water to reduce the concentration of the solute.

Hence we can conclude that The activity that would reduce the ion-pairing effect in his AICI₃ solution is to add some water to his solution

Learn more about ion pair effect : https://brainly.com/question/24100697

Answer:

a. The longest chain is chosen incorrectly.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to firstly draw the structural formula of the 1,3-Dimethylbutane:

[tex]CH_3-CH_2-CH(CH3)-CH_2-CH_3[/tex]

Thus, we can see that the correct name should be 3-methylpentane since the longest chain was chosen incorrectly, as it must have five carbon atoms.

Regards!

Fabric A is likely to be a material that has a moderate tendency to gain electrons when in contact with other materials and is lower in the electrostatic series than ebonite but higher than wood.

The electrostatic series is a list of materials ranked in order of their tendency to gain or lose electrons when in contact with another material.

Materials higher in the series tend to lose electrons more readily and become positively charged, while materials lower in the series tend to gain electrons more readily and become negatively charged.

Ebonite is a synthetic polymer that is known to become negatively charged when rubbed, and it is typically placed near the top of the electrostatic series.

Wood, on the other hand, is a poor conductor of electricity and does not readily become charged when rubbed. Based on these facts, we can infer that Fabric A is lower in the electrostatic series than ebonite, but higher than wood.

To learn more about an electrostatic series, follow the link:

https://brainly.com/question/31065393

#SPJ2

Answer:

2–methylbutane

Explanation:

To name the compound given above, the following must be obtained:

1. Determine the longest continuous carbon chain. This gives the parent name of the compound.

2. Determine the substituent group attached.

3. Determine the position of the substituent group by giving it the lowest possible count..

4. Combine the above to obtain the name of the compound.

With the above information, we can name the compound as follow:

1. The longest continuous carbon chain of the compound is 4. Thus, the parent name is butane.

2. The substituent group attached to the compound is methyl (–CH₃).

3. The methyl (–CH₃) group is located at carbon 2 (i.e counting from the left side).

4. The name of the compound is:

2–methylbutane

Answer:

1x10^-6

Explanation:

Explanation:

Sublimation is the conversion between the solid and the gaseous phases of matter, with no intermediate liquid stage

Answer:

i thing its b

Explanation:

The acid dissociation constant (Ka) is a measure of the strength of an acid in solution. In HNO₃ (nitric acid), the given Ka value is 4.0 x 10⁴. It represents the equilibrium constant for the dissociation reaction of an acid in water. Therefore, option B is correct.

The dissociation constant often denoted as Kd, is a measure of the strength of the interaction between a ligand and a receptor or between a substrate and an enzyme.

A high Ka value indicates a strong acid, while a low Ka value indicates a weak acid. In this case, the Ka value of 4.0 x 10⁴ for HNO₃ is relatively high.

To learn more about the dissociation constant, follow the link:

https://brainly.com/question/28197409

#SPJ6

Answer: hello some part of your question is missing below is the missing part

In an experiment to determine the % of ascorbic acid in Vitamin C Tablets by Titration with Potassium Bromate,

answer:

Oxidation half reaction of Vitamin C

Explanation:

The solution will turn cloudy dark purple even after reaching endpoint when allowed to settle with time. because of the Oxidation half reaction of Vitamin C. also during the Titration process few drops of starch solution will be added to help determine the endpoint of the experiment .

Answer:

Calcium Oxide is a drying agent, hence it dehydrates the reaction to give pure solid Iron ( III ) chloride, which cannot be done by calcium chloride.

It preferred to use calcium oxide rather than calcium chloride in preparation of iron (III) chloride because Calcium Oxide is a drying agent, hence it dehydrates the reaction to give pure solid Iron ( III ) chloride, which cannot be done by calcium chloride.

A process such as a chemical reaction that removes water.The atoms which constitute the molecule of water that is removed.

Hence,It preferred to use calcium oxide rather than calcium chloride in preparation of iron (III) chloride because Calcium Oxide is a drying agent,

Thus, it dehydrates the reaction to give pure solid Iron ( III ) chloride, which cannot be done by calcium chloride.

Learn  more about reactions here ;

https://brainly.com/question/17434463

#SPJ2

1 NaCl + 1 HCl ➡️ 1 NaCl + Water (H2O) .

Answer:

See explanation and images attached

Explanation:

The first image shows the structure of hydrogen peroxide. It does not exist as resonance structures. The structure and properties of the molecule can wholly be explained on the basis of a single Lewis structure.

However, the structure of the bicarbonate ion in sodium bicarbonate can not be completely described by a single Lewis structure. Hence, two resonance structures are shown for the bicarbonate ion. In each case, Na^+ is the counter ion.

Answer:

2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g) + 248kcal

Explanation:

The reaction of the problem occurs as follows:

H2S(g) + O2(g) → H2O(g) + SO2(g)

To balance the reaction we must balance oxygens:

H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g)

To balance the complete reaction:

2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g)

As the energy is evolved, 124kcal are as product in the reactio per mole of H2S. As the balanced reaction contains 2 moles of H2S, the heat evolved is:

124kcal*2 = 248kcal:

2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g) + 248kcal

And this is the balanced equation

Explanation:

[tex]2H_2O_2 \rightarrow 2H_2O + O_2[/tex]

First convert the amount of water into moles:

360 g H2O × [tex]\left(\dfrac{1\:\text{mol}H_2O}{18.015\:\text{g}H_2O}\right)[/tex]

[tex] = 20. \:\text{mol}H_2O[/tex]

Now let's calculate the number of moles of O2 gas produced.

20 mol H2O × [tex]\left(\dfrac{1\:\text{mol}O_2}{2\:\text{mol}H_2O}\right)=10\:\text{mol}O_2[/tex]

The volume of gas at 10°C and 5 atm can be found using the ideal gas law:

[tex]PV=nRT[/tex]

[tex]V= \dfrac{nRT}{P}[/tex]

[tex]= \dfrac{(10)(0.082)(283)}{(5)}=46.4\:L[/tex]

Answer:

it binds molecules like a chemical bond-breaking

Explanation:

Enzymes perform the critical task of lowering a reaction's activation energy—that is, the amount of energy that must be put in for the reaction to begin. Enzymes work by binding to reactant molecules and holding them in such a way that the chemical bond-breaking and bond-forming processes take place more readily.

Answer:

my define it will be turst me is c

Answer:

Compare the solubility of silver chloride in each of the following aqueous solutions:

a. 0.10 M AgNO3 More soluble than in pure water.

b. 0.10 M NaCI Similar solubility as in pure water

c. 0.10 M KNO3 Less soluble than in pure water.

d. 0.10 M NH4CH3COO

Explanation:

This is based on common ion effect.

According to common ion effect, the solubility of a sparingly soluble salt decreases in a solution containing common ion to it.

The solubility of AgCl(s) is shown below:

[tex]AgCl(s) <=> Ag^{+}(aq)+Cl^-(aq)[/tex]

So, when it is placed in:

a. 0.10 M AgNO3

Due to common ion effect Ag+, its solubility is less in this solution than in pure water.

b. 0.10 M NaCI :

Due to common ion effect Cl-, its solubility is less in this solution than in pure water.

c. 0.10 M KNO3 :

In this solution there is no presence of common ion.

So, the solubility of AgCl in this solution is similar to that of pure water.

d. 0.10 M NH4CH3COO:

In this solution, AgCl forms a precipitate.

So, the solubility of AgCl is more in this solution compared to pure water.

Answer:

100 mL

Explanation:

The reaction that takes place is:

First we convert 500 mg of CaCO₃ into mmoles, using its molar mass:

Then we convert 5 mmoles of CaCO₃ into HCl mmoles, using the stoichiometric coefficients of the balanced reaction:

Finally we calculate the volume of a 0.10 M HCl solution (such as stomach acid) that would contain 10 mmoles:

Answer:

In a combination redox reaction, two or more reactants, at least one of which is a(n) element, form a(n) compound. General Reaction: X + Y > Z

In a decomposition redox reaction, a(n) compound forms two or more products, at least one of which is a(n) element. General Reaction: Z>X+Y

In double-displacement (metathesis) reactions, such as precipitation and acid-base reactions, atoms (or ions) of two compounds exchange places; these reactions are not redox processes. General Reaction: AB+CD>AD+CB

In solution, single-displacement reactions occur when a(n) atom of one element displaces the atom of another. Since one of the reactants is a(n) element, all single-displacement reactions are redox processes. General Reaction: X+YZ>XY+Z

Explanation:

In a combination redox reaction, two or more reactants, at least one of which is a(n) element, form a(n) compound.

General Reaction: X + Y > Z

In the reaction scheme above, X combines with Y to give Z as a product.

In a decomposition redox reaction, a(n) compound forms two or more products, at least one of which is a(n) element.

General Reaction: Z>X+Y

In the reaction scheme above, Z decomposes to X and Y

In double-displacement (metathesis) reactions, such as precipitation and acid-base reactions, atoms (or ions) of two compounds exchange places; these reactions are not redox processes since there are no changes occurring in the oxidation number of the atoms (or ions) involved.

General Reaction: AB+CD>AD+CB

In the reaction scheme above, B and D exchange places in their respective compounds

In solution, single-displacement reactions occur when a(n) atom of one element displaces the atom of another. This type of reaction is due to the difference in the reactivities of the elements. The more reactive atom of one element displaces the least reactive atom of another element from its solution.

Since one of the reactants is a(n) element, all single-displacement reactions are redox processes.

General Reaction: X+YZ>XY+Z

In the reaction scheme above, X displaces Z from the compound YZ.

Answer:

Kf = 0.389.

Explanation:

Hello there!

In this case, it turns out possible for us to solve this problem by firstly writing the equilibrium chemical equation and equilibrium expression for the formation of this complex:

[tex]B+C\rightleftharpoons BC\\\\Kf=\frac{[BC]}{[B][C]}[/tex]

Thus, we firstly calculate the concentrations at equilibrium, knowing that the reaction extent in this case is 0.00500mol (same as the formed moles of BC):

[tex][B]=[C]=\frac{0.0350L*1.00mol/L-0.00500mol}{0.0700L} =0.429M[/tex]

[tex][BC]=\frac{0.00500mol}{0.0700L} =0.0714M[/tex]

And finally, the equilibrium constant:

[tex]Kf=\frac{0.0714}{[0.429][0.429]}\\\\Kf=0.389[/tex]

Regards!

Answer:

a, d and e. are true.

Explanation:

The reaction that occurs is:

Na2CO3(aq) + CaCl2(aq) → CaCO3(s) + 2NaCl

In ideal conditions, the percent yield of the reaction must be 100%. All explanations about why the student could not collect all precipitate are right:

a. The combined reactants were not stirred before filtering the precipitate. Not stirring could not promote all the reaction. TRUE.

b. The student did not completely dry the precipitate before weighing it. If the student don't dry the precipitate, the mass of precipitate must be higher producing a percent yield > 100%. FALSE.

c. The precipitate was not washed prior to drying. Produce more mass. FALSE.

d. A rubber policeman was not used to scrape precipitate from the beaker. If the student doesn't collect all the precipitate the percent yield could be < 100%.. TRUE.

e. The filter paper was not wetted with water prior to filtering the precipitate. TRUE. If you don't wet the filter paper you can lose a part of precipitate from the walls of this one.

Answer:

1. Write the balanced chemical equation for the reaction

2. Identify all important information provided in the word problems or data table.

3. Solve for the theoretical yield of the reaction, following all the steps of a stoichiometry calculation organizer. Use two calculations if both reactants are provided.

4. Use the percent yield equation to calculate the percent yield of the reaction.

Explanation:

its comes right from the 5.06 lesson

With the help of hess's law:

ΔHf(MnO)=−248.9 kJ−12(272.0) kJ=−384.9 kJ(per mole) Δ H f ( M n O ) = − 248.9 k J − 1 2 ( 272.0 ) k J = − 384.9 k J ( p e r m o l e )

Hess's law of constant heat summation, also known simply as Hess' law, is a relationship in physical chemistry named after Germain Hess, a Swiss-born Russian chemist and physician who published it in 1840.

Moreover, hess's Law of Constant Heat Summation (or just Hess's Law) states that regardless of the multiple stages or steps of a reaction, the total enthalpy change for the reaction is the sum of all changes.

Therefore, hess' law is based on the state function character of enthalpy and the first law of thermodynamics. Energy (enthalpy) of a system (molecule) is a state function.

Learn more about hess's law:

https://brainly.com/question/14561923

#SPJ6

Answer:

carbohydrates are simple sugars which can be broken down to form 3 sugars.

which are , (maltose) (fructose) & (glucose)

Answer:

Sensors and evacuation planning.

Explanation:

Sensors that provides information about hurricane and evacuation planning are the two steps that can reduce the vulnerability of the United States to hurricanes. Sensors provides information about hurricane so we can prepare ourselves about it and the evacuation plan helps in order to quick displacement of people from the hurricane area so these two steps can reduce the vulnerability of the US to hurricanes.

Answer:

D

Explanation:

8oz=1cup

Xoz=1/4cup

cross multiply

Xoz=8×1/4=2

2oz=1/4cup

1oz=2T

2oz=x

cross multiply

×=2×2=4T

The cup of butter, number of tablespoons and ounces of butter are all in direct proportion with one another. The interpretation of the information provided is:

(b). The information provided gives the conversion factor 8oz/1 cup.

Given that:

[tex]1\ recipe = \frac{1}{4}\ cup[/tex]

[tex]1\ oz = 2T[/tex]

[tex]8\ oz = 1\ cup[/tex]

Multiply both sides of [tex]1\ oz = 2T[/tex] by 8

[tex]8 \times 1oz = 8 \times 2T[/tex]

[tex]8 oz = 16T[/tex]

Substitute 8oz for 1 cup in: [tex]1\ recipe = \frac{1}{4}\ cup[/tex]

[tex]1\ recipe = \frac{1}{4} \times 8oz[/tex]

Substitute [tex]8 oz = 16T[/tex]

[tex]1\ recipe = \frac{1}{4} \times 16T[/tex]

[tex]1\ recipe = 4T[/tex]

The interpretations are as follows:

Hence, (b) is correct

Read more about direct proportions at:

https://brainly.com/question/1266676

Explanation:

ethoxypropane

Ch3-ch2-o-ch2-ch2-och3

Answer:

compounds are elements include an element and a compound

Explanation:

elements in the decomposition reaction is the substance that cannot be separated into simpler substances. Compounds, technically act as a reactant in the decomposition reaction, but since the reaction breakdown one substance into two or more, sometimes it exists in the product