. The nucleophile in the reaction is _______ b. The Lewis acid catalyst in the reaction is ______ c. This reaction proceeds___________(faster or slower) than benzene. d. Draw the structure of product D

Answer:

118.06 mL

Explanation:

The neutralization reaction between HBr (acid) and Ba(OH)₂ (base) is the following:

2HBr + Ba(OH)₂ → BaBr₂ + 2H₂O

According to the equation, 2 moles of HBr react with 1 mol Ba(OH)₂. Thus, at the equivalence point the moles of acid and base react completely:

2 moles HBr = 1 mol Ba(OH)₂

We can replace the moles by the product of the molar concentration (M) and volume (V):

2 x (M HBr) x (V HBr) = M Ba(OH)₂ x V Ba(OH)₂

Now, we introduce the data in the equation to calculate the volume in mL of Ba(OH)₂:

V Ba(OH)₂ = (2 x (M HBr) x (V HBr))/M Ba(OH)₂

                 = (2 x 0.311 M x 57.7 mL)/(0.304 M)

                 = 118.06 mL

Therefore, 118 mL of Ba(OH)₂ are needed.

Answer:

the molar mass of the element

Answer:

643(%=:(¥75 )(:7$"8"),"7$"()9_/"¥?:

Answer:

For 1: The product is phosphoric acid and the solution is acidic in nature.

For 2: The product is sodium hydroxide and the solution is basic in nature.

For 3: The product is nitric acid and the solution is acidic in nature.

Explanation:

For the given options:

(1): When diphosphorus pentoxide reacts with water, it leads to the formation of phosphoric acid, which makes the solution acidic in nature.

The chemical equation for the reaction follows:

[tex]P_4O_{10}+6H_2O(l)\rightarrow 4H_3PO_4(aq)[/tex]

(2): When disodium oxide reacts with water, it leads to the formation of sodium hydroxide, which makes the solution basic in nature.

The chemical equation for the reaction follows:

[tex]Na_2O+H_2O(l)\rightarrow 2NaOH(aq)[/tex]

(3): When dinitrogen pentoxide reacts with water, it leads to the formation of nitric acid, which makes the solution acidic in nature.

The chemical equation for the reaction follows:

[tex]3N_2O_5+3H_2O(l)\rightarrow 6HNO_3(aq)[/tex]

Answer:

condensing water

Explanation:

Entropy refers to the level of disorderliness in a system. The entropy of liquids is greater than that of solids. The entropy of gases is greater than that of liquids.

A process of physical change involving a change of state from solid to liquid or liquid to gas is accompanied by increase in entropy.

However, a change of state involving a change from liquid to solid or gas to liquid is accompanied by decrease in entropy.

Hence, steam condensing to water leads to decrease and not increase in entropy of the system.

Explanation:

For this question, we apply the equation: Q = mCp AT Where m is the mass of the substance, Cp

is its specific heat capacity and AT is the

temperature change. Q = 896 x 0.45 x (5-94)

Q = -35884.8 Joules

So about -36 kilojoules of heat is released.

mark as brainliest

Answer: The correct option is ALL OF THE ABOVE.

Explanation:

TITRATION is a type of volumetric analysis which is used for determining the concentration of solutions. In this process a specific volume of a solution is placed in a conical flask by means of a pipette and small quantities of a second solution is slowly added from a burette until the end point is reached. This is determined by a means of an indicator which shows a characteristic colour change.

During titration, the following precautions should be followed to avoid errors and maintain standardisation in the experiment.

--> Any air bubble in the burette and pipette must be removed during measurement

--> the burette tap should be tightened to avoid leakage.

--> Remove the funnel from the burette before taking any reading to avoid errors in reading the volume.

--> use the base solution such as Sodium Hydroxide Solution to rinse the burette after washing with soap and tap water:

• to remove any air bubble and fill it's tip

• to remove any residual liquid from the water and soap solution which may interfere with the results of the experiment.

• to check if the burette is in good condition.

Therefore all of the above options to the question are correct.

Answer:

The full amount (5.00 g) will be dissolved in 1 L of water at 25°C.

Explanation:

The molecular weight (MW) of Vanillin (C₈H₈O₃) is calculated from the chemical formula as follows:

MW(C₈H₈O₃) = (12 g/mol x 8) + (1 g/mol x 8) + (16 g/mol x 3) = 152 g/mol

If 0.070 mol of C₈H₈O₃ are soluble per liter of water at 25°C, the maximum mass that can be dissolved in 1 L is:

0.070 mol x 152 g/mol = 10.64 g

Since 5.00 g is lesser than the maximum amount that can be dissolved (10.64 g), the added amount will be completely dissolved in 1 L of water at 25°C.

Answer:

(a) The potential near its surface is 45 * 10^6 V.

(b) The distance from which its center is the potential 1.00 MV is 45 m.

(c) Its energy in MeV when the atom is at the distance found in part b is 132 MeV.

Explanation:

Note: This question is not complete. The complete question is therefore provided before answering the question.

A research Van de Graaff generator has a 2.00-m diameter metal sphere with a charge of 5.00 mC on it. (a) What is the potential near its surface?

(b) At what distance from its center is the potential 1.00 MV?

(c) An oxygen atom with three missing electrons is released near the Van de Graaff generator. What is its energy in MeV when the atom is at the distance found in part b?

The explanation of the answer is now provided as follows:

(a) What is the potential near its surface?

Q = Charge on the generator = 5 mC = 5 * 10^(-3)C

r = Sphere radius = 2 / 2 = 1 m

k = Constant of the electric force = 9 * 10^(9) N . m^2 / C^2

Therefore, the electric potential of a point charge can be calculated as follows:

V = kQ / r

V = (9 * 10^9 * 5 * 10^(-3)) / 1 = 45 * 10^6 V

Therefore, the potential near its surface is 45 * 10^6 V.

(b) At what distance from its center is the potential 1.00 MV?

This implies the distance where the potential is 1 MV.

Since the electric potential of a point charge is as follows:

V = kQ / r

Therefore, we can solve for r and estimate it as follows:

R = kQ / V = (9 * 10^9 * 5 * 10^(-3)) / 1 * 10^6 = 45 m

Therefore, the distance from which its center is the potential 1.00 MV is 45 m.

(c) An oxygen atom with three missing electrons is released near the Van de Graaff generator. What is its energy in MeV when the atom is at the distance found in part b?

The link between the potential difference and electrical potential energy can be stated as follows:

ΔV = ΔU / q

Therefore, we have:

ΔU = qΔV = q(Va - Vb) = 3 * (45 – 1) = 132 MeV

Therefore, its energy in MeV when the atom is at the distance found in part b is 132 MeV.

Answer:

Density and rigidity

Answer:

1/2 f1 will cross

Explanation:

answer it

Answer:

Ka = 3.45x10⁻⁶

Explanation:

First we calculate [H⁺], using the given pH:

To solve this problem we can use the following formula describing a monoprotic weak acid:

We input the data that we already know:

And solve for Ka:

Answer:

1) filling thermometers

Explanation:

thermometers are filled with liquid mercury

Answer:

The equivalent weight of calcium hydroxide is 1/2 he mass of a mol of calcium hydroxide. 1 mol Ca(OH)2 = 74 grams Ca(OH)2 ; 1 equivalent Ca(OH)2 = 37 grams Ca(OH)2......

Explanation:

HOPE IT HELPS YOU

Answer:

21.6 g

Explanation:

The reaction that takes place is:

First we convert the given masses of both reactants into moles, using their respective molar masses:

0.6 moles of CH₄ would react completely with (2 * 0.6) 1.2 moles of O₂. As there are more O₂ moles than required, O₂ is the reactant in excess and CH₄ is the limiting reactant.

Now we calculate how many moles of water are produced, using the number of moles of the limiting reactant:

Finally we convert 1.2 moles of water into grams, using its molar mass:

Hi there!

[tex]\large\boxed{\text{Visible Light.}}[/tex]

According to the diagram and the arrows, a drop from level 4 (n = 4) to level 2 (n = 2) produces orange visible light.

[tex]\red\large{{}}[/tex]

Answer:

That is a " ball and stick " model which represents carbon compounds.

Explanation:

This is the answer. Hope it helps you find what you're looking for.

Answer:

By how many times would you expect Al2(SO4)3 to depress the F.P of water compared to sucrose C12H22011 ?.

Explanation:

The freezing point of a pure solvent decreases further by adding a nonvolatile solute.

This is called depression in freezing point.

When an ionic solute is dissolved then the depression in the freezing point is proportional to the number of ions present in the solution.

In aluminum sulfate, there are five ions formed as shown below:

[tex]Al_2(SO_4)_3(aq)->2Al^3^+(aq)+3SO_4^2^-(aq)[/tex]

But sucrose is a covalent compound and it does not undergo dissociation.

Hence, aluminum sulfate decreases the freezing point of water by five times compared to sucrose.

Explanation:

P=18000000/6 zeros. not sure how to do rest

Explanation:

a) [tex]n = \dfrac{PV}{RT} = \dfrac{(1.8×10^7\:\text{Pa})(3\:\text{L})}{(8310\:\text{L•Pa/mol•K})(300\:\text{K})}[/tex]

[tex]\:\:\:\:\:\:\:= 21.7\:\text{mol}[/tex]

b) [tex]P = \dfrac{nRT}{V}[/tex]

[tex]\:\:\:\:\:\:\:\:\:= \dfrac{(50\:\text{mol})(8310\:\text{L•Pa/mol•K})(300\:K)}{(3\:L)}[/tex]

[tex]\:\:\:\:\:\:\:\:\:=4.2×10^7\:\text{Pa}[/tex]

Answer:

Active transport by the Na+-K+ pump

Explanation:

Active transport by the Na+-K+ pump

Maintenance (and restoration) of the resting ion concentrations depends on the Na+-K+ pump. Once gated ion channels are closed, the combined action of the pump and ion leakage (particularly that of K+) establishes a resting membrane potential in a typical neuron of around âˆ'70 mV.

Answer:

3.36 grams Al°(s)  

Explanation:

Given AlCl₃(s), determine the mass (grams) of Al°(s) produced from electrolysis of Aluminum Chloride at 10.0 amps for 1.00 hour.

AlCl₃(s) + 378.3°F (=192.4°C) => Al⁺³(l) + 3Cl⁻(l)

formula wt. Al° = 27g/mol

Faraday Constant (F°) = 96,500 amp·sec

? grams Al°(s) = 10.0amps x (1 mole e⁻/96,500amp-sec) x (1 mole Al°(s)/3 mole e⁻) x (27g Al°(s)/1 mole Al°(s)) x 3,600 sec = 3.36 grams Al°(s)

The 3.36 grams of aluminum are produced in 1 hour by the electrolysis of molten AlCl₃ when 10A current is passed.

Electrolysis is a process that uses an electrical current to break chemical compounds. The electric current is passed through the substance to bring the chemical change by gain or loss of electrons.

The electrolysis of the aluminum chloride in the molten state is represented as:

AlCl₃  →   Al³⁺    +  3Cl⁻

At cathode:   Al³⁺  +  3e⁻  →  Al (s)

Given,  the current. I = 10 A and  t = 1 hr = 3600 s

We know that the current is calculated from the equation:  I = q/t

q = I× t

q = (10A) × (3600s)

q = 36 × 10³ C

We know, 96500 C of the charge has electrons = 1 mol

36 × 10³ C of the charge has electrons  = 0.373 mol

3 moles of electrons required to produce aluminum = 1 mol

0.373 mol of electrons will produce aluminum = 0.373/3 = 0.124 mol

We know that, the mass of one mole of Al = 27g

The mass of 0.124 mol of Al = 27 × 0.124 = 3.36 g

Therefore, the aluminum produced in 1 hour by the electrolysis of molten AlCl₃ is equal to 3.36 grams.

Learn more about electrolysis, here:

https://brainly.com/question/12054569

#SPJ5

Answer:

0.5024 g

Explanation:

Step 1: Calculate the concentration of H⁺

We will use the definition of pH.

pH = -log [H⁺]

[H⁺] = antilog -pH = antilog -12.40 = 3.981 × 10⁻¹³ M

Step 2: Calculate the concentration of OH⁻

We will use the ionic product of water expression.

[H⁺] [OH⁻] = 10⁻¹⁴

[OH⁻] = 10⁻¹⁴/[H⁺] = 10⁻¹⁴/3.981 × 10⁻¹³ = 0.02512 M

Step 3: Calculate the initial concentration of NaOH

NaOH is a strong base and the molar ratio of NaOH to OH⁻is 1:1. Thus, the initial concentration of NaOH is 1/1 × 0.02512 M = 0.02512 M.

Step 4: Calculate the moles of NaOH

We will use the definition of molarity.

M = moles of NaOH/liters of solution

moles of NaOH = M × liters of solution

moles of NaOH = 0.02512 mol/L × 0.5000 L = 0.01256 mol

Step 5: Calculate the mass of 0.01256 moles of NaOH

The molar mass of NaOH is 40.00 g/mol.

0.01256 mol × 40.00 g/mol = 0.5024 g

Answer:

the product is Mg(Clo3)2 + AgI

Answer:

false

Explanation:

category 1 is the worst

Answer:

Each electrode attracts ions that are of the opposite charge. Positively charged ions, or cations, move toward the electron-providing cathode, which is negative; negatively charged ions, or anions, move toward the positive anode.

Answer:

That is, the atom is a solid and indivisible mass. However, the fenomenom by which an iron atom emits particles when it is struck by light (known as the photoelectric effect) can not be explaind by this indivisible atom model.

Answer:

10.1 h

Explanation:

Let's consider the reduction half-reaction of iron from an aqueous solution of iron (III) chloride.

Fe³⁺(aq) + 3 e⁻ ⇒ Fe(s)

We can calculate the time required to produce 5.00 moles of Fe using the following relationships.

[tex]5.00molFe \times \frac{3 mole^{-} }{1molFe} \times\frac{96486C}{1mole^{-} } \times \frac{1s}{40.0C} \times \frac{1h}{3600s} = 10.1 h[/tex]

Answer:

 Lewis structure of Hydronium ion is shown below :                          

Explanation:

Lewis structure : It is a representation of valence electrons on the atoms in a molecule

Here , Hydronium ion is given , which contains 1 atom of oxygen and 3 atoms of hydrogen .

Oxygen has a total of 6 valence electrons and hydrogen contains 1 valence electron .

Oxygen share its 3 valence electrons with 3 hydrogen atoms and left with 3 valence electrons. From these three valence  electrons of oxygen atom  two electrons will be shown as a pair of electrons on oxygen atom but a single electron can not be shown . So , to simplify this, one positive charge is shown overall .  

Resonance structure will be same as the hybrid structure because all  three atoms are same , that is hydrogen .

Answer: If a hydrogen atom and a helium atom have the same kinetic energy then the wavelength of the hydrogen atom will be roughly equal to the wavelength of the helium atom.

Explanation:

The relation between energy and wavelength is as follows.

[tex]E = \frac{hc}{\lambda}\\[/tex]

This means that energy is inversely proportional to wavelength.

As it is given that energy of a hydrogen atom and a helium atom is same.

Let us assume that [tex]E_{hydrogen} = E_{helium} = E'[/tex]. Hence, relation between their wavelengths will be calculated as follows.

[tex]E_{hydrogen} = \frac{hc}{\lambda_{hydrogen}}[/tex]    ... (1)

[tex]E_{helium} = \frac{hc}{\lambda_{helium}}[/tex]         ... (2)

Equating the equations (1) and (2) as follows.

[tex]E_{hydrogen} = E_{helium} = E'\\\frac{hc}{\lambda_{hydrogen}} = \frac{hc}{\lambda_{helium}} = E'\\\lambda_{helium} = \lambda_{hydrogen} = E'[/tex]

Thus, we can conclude that if a hydrogen atom and a helium atom have the same kinetic energy then the wavelength of the hydrogen atom will be roughly equal to the wavelength of the helium atom.

Answer: it will be basic

pH that ranges from 0-6 are acid

pH of EXACTLY 7 is neutral

pH greater than 7 are strongly basic or base