Answer:
The liquid left after crystallization is called Residue
state the modern periodic law
Answer:
The modern periodic law states that the physical and chemical properties of the elements are the periodic function of the atomic numbers and electronic configurations. ... This repetition occurs if the arrangement of the elements is in order of their increasing atomic numbers.
A reaction happens quickest during:
A. The beginning of the reaction
B. It is constant throughout the reaction
C. The end of the reaction
D. The middle of the reaction
The reaction is the formation of the product from the reactants. A reaction happens quickest during the beginning of the reaction. Thus, option A is correct.
What are the factors affecting the reaction rate?The reaction rate is the pace at which the reaction takes place and the breakdown or the combination of the reactants to produce the products. The rate of reaction depends on the concentration of the reactants.
The concentration of the reactants is in direct proportion with the rate as at the beginning of a reaction there is a higher amount of substance present than at the end.
As the reaction proceeds, the reactants get consumed and their concentration decreases. As there is a decrease in concentration the rate of the reaction converting and producing the products also decreases.
Therefore, option. the rate of reaction is fast at the beginning.
Learn more about reaction rate here:
https://brainly.com/question/16726097
#SPJ5
WHICH STATEMENT BEST REPRESENTS A HYPOTHESIS
Answer:
D
Explanation:
Hypotheses are educated guesses, and the best answer is the one with an if, as it indicates that it's a guess.
Answer:
letter b should be the answer
which of the following two conditions will favor a spontaneous reaction?
a) an increase in entropy and a decrease in enthalpy
b) an increase in both entropy and in enthalpy
c) a decrease in entropy and a decrease in enthalpy
d) a decrease in entropy and an increase in enthalpy
Two metals with equal mass will absorb heat according to their heat absorbing capacity.
The increase in entropy will cause the solid substance to break into multiple pieces.
When these solute particles detach from each other they will form a solution. Entropy increase will cause the temperature to increase.
Decrease in enthalpy is an exothermic reaction which releases heat from the reaction and then desired products will be formed.
Learn more at https://brainly.com/question/24376442
The process of diffusion can be described as: Movement of water from the area of high concentration of solute to the area of low concentration of solute. Movement of solute from the area of low concentration of solute to the area of high concentration of solute. Movement of water from the area of low concentration of solute to the area of high concentration of solute. Movement of solute from the area of high concentration of solute to the area of low concentration of solute.
Answer:
Movement of water from the area of high concentration of solute to the area of low concentration of solute.
Explanation:
Diffusion can be defined as the movement of gas molecules from a region of high concentration to a region of lower concentration until an equilibrium is attained or reached. This mixing of gas molecules in the liquid or gaseous state is due to their kinetic energy of random motion i.e without requiring bulk motion.
This ultimately implies that, diffusion is a phenomenon through which gas molecules in either a gaseous or liquid state spread out in response to a concentration gradient, which is simply the difference in concentration of the gases across a space.
During diffusion, molecules move from areas of high concentration to areas of low concentration. Also, diffusion does not require energy to move molecules.
Hence, the process of diffusion can be described as movement of water from the area of high concentration of solute to the area of low concentration of solute.
A solute can be defined as a substance that is typically dissolved in a liquid solvent such as water, coffee, tea, etc., to produce a solution.
what are the defects of mendeleev's periodic table
Answer:
1 Anomalous Pairs. The rest of the pairs of elements don't follow the follow Mendeleev's Principles . they are :
2Grouping of chemically dissimilar elements.
3Position of Isotopes.
4Electronic arrangement.
5Separation of chemically similar elements.
6The position of hydrogen.
Exploring the Electromagnetic Spectrum
Assemble the electromagnetic spectrum by dragging each piece to the correct place on the wavelength scale.
Visible
10-2
10-7
10
10-9
10
-5
Wavelength (cm)
(PLEASE HELP!!)
Answer:
See explanation
Explanation:
When dealing with the Electromagnetic Spectrum, one should remember the acronym ROYGBIV. This will apply to visible spectrum but the non-visible spectra can de logically deduced from the sequence. That is ...
R-Red > O-Orange > Y-Yellow > G-Green > B-Blue > I-Indigo > V-Violet
In relation to the three wave properties; wavelength (λ), frequency (ν) & energy (ΔE) ...
Wavelengths => Long λ Short λ
Frequency => Low ν High ν
Energy => Low ΔE High ΔE
Note that all 'L's' are on the 'Left'
On Left => Long wavelengths, Low frequency & Low energy; the 'opposites' are on 'the other end of the list'.
Therefore for other wavelengths outside the visible spectrum set up as follows, start with visible spectrum in the middle and insert the invisible spectra of interest.
Long λ <= Visible (R.0.Y.G.B.I.V.) => Short λ
λ (cm): 10¹ 10⁻² 10⁻³ (10⁻⁵- 10⁻⁶) 10⁻⁷ 10⁻⁹ (10⁻¹¹ - 10⁻¹³)
[radio > microwave > IR > visible > UV > X-Rays > Gamma]
Hope this helps :-)
In a synthesis experiment you obtain a sample of product on which you do a melting point determination and find a melting point range of 114 to 125 degrees Celsius. The sample is supposed to be acetylsalicyclic acid. What preliminary conclusion(s) can you reach from this one determination
Answer:
The melting point determination may need improvement- it may not have been done properly, and make sure it was repeated at least once.
Explanation:
Given that we know the actual melting point of pure acetylsalicyclic acid to be 135°, it follows that the process followed to obtain the melting point range of 114 to 125 degrees Celsius must be inaccurate.
Therefore, we can conclude that, the melting point determination may need improvement. It may not have been done properly, and we must make sure it is repeated at least once.
Classify HBr as a strong acid or a weak acid.
Strong Acid or Weak Acid?
Name one diatomic compound which is mononuclei
Answer:
Common diatomic molecules include hydrogen (H2), nitrogen (N2), oxygen (O2), and carbon monoxide (CO). Seven elements exist as homonuclear diatomic molecules at room temperature: H2, N2, O2, F2, Cl2, Br2, and I2. The bond in a homonuclear diatomic molecule is non-polar due to the electronegativity difference of zero.
What is the chemical formula for carbon tetrafluoride?
The Periodic Table
1
mono-
2
di-
3
4
tetra-
5
penta-
hexa-
6
7
hepta-
8
Oct-
9
nano-
10
deca-
Which statement describes a condensation reaction?
A. monomers break away when one forms a double bond monomers break away with the addition of a water molecule.
B. Two monomers combine when one adds to the double bond of another.
C. Two monomers form a new bond with the loss of a water molecule .
The statement that describes a CONDENSATION reaction is that two monomers form a new bond with the loss of a water molecule . That is option C.
CONDENSATION REACTION involves the combination of two or more molecules(monomers) of water. In reaction, a new bond is usually formed.
The characteristics of a condensation reaction includes:
formation of complex molecules (combination of two smaller monomers),water is usually given off as by product it requires a catalyst for a complete reaction to occurA reaction is called a condensation reaction because a small molecule such as water is released as a byproduct.
A typical example of a condensation reaction is the condensation of amino acids to form dipeptide. The −OH from the carboxyl group of one amino acid combines with a hydrogen atom from the amine group of the other amino acid to produce water.
Therefore, the statement that describes a CONDENSATION reaction is that two monomers form a new bond with the loss of a water molecule. That is option C
Learn more about condensation here:
https://brainly.com/question/16350693
PLZ HELP ME WITH MY WORK
How many different elements are there in the molecule C8H11NO2,?
A. 21
B. 2
c. 11
D. 4
Answer:
option C 11
is the correct answer
If the volume of a gas is decreased by changing the shape of the container, the number of collisions per area between the molecules and the container walls will increase. This corresponds to an increase in the gas pressure, which is the force exerted per area. What gas law is kinetic molecular theory of gases (KMT) explaining in this case
Answer:
If the volume of a gas is decreased by changing the shape of the container, the number of collisions per area between the molecules and the container walls will increase. This corresponds to an increase in the gas pressure, which is the force exerted per area.
Assertion (A): An orbital cannot have more than two electrons, moreover, if an orbital has two electrons they must have opposite spins.
Reason (R): No two electrons in an atom can have the same set of all the four quantum
numbers.
a) Both A and R are true and R is the correct explanation of A.
b) Both A and R are true but R is not the correct explanation of A.
c) A is true but R is false.
d) Both A and R are false.
pls answer
Answer:
the correct answer is option ( A )
Both A and R are true and R is the correct explanation of A.
Explanation:
hope it helps you
Mark my answer as brainlist
have a nice day
What name is given to a metal when it forms an ion, and what type of charge does it have?
Answer:
Cation metal. Positive charge.
Answer:
DHS has been working hard for years and it is still unclear whether this would happen if it is to end the market with the engine is a little less than the next 5years to be 8years in the first quarter and the same year in a quarter or less than a quarter or more than that
(answered on edge)
Calculate the percent by mass of each element.
%N = 35 %
%H = 5.0 %
%O = 60 %
Answer:
N=35%. so 35/100*7 =2.45%
H=5.0 so 5/100*1=0.05%
o=60% so 60/100*8=4.8%
What type of Nuclear decay is shown by the reaction below
Answer:
bete is your answer.
have a great day.
I think c ....is write answers
how is electrovalent bond formed ? Describe with an example .
Answer:
For example, the bond between the sodium and chlorine atoms in sodium chloride (NaCl) is formed by the transfer of an electron from sodium to chlorine, creating Na + and Cl – ions. ... The electrostatic attraction between these ions provides the bonding in NaCl.
are these following a basic radical or acid radical?
1. Chlorate
2. Peroxide
3. Silver
4. Zinc
5. Nitrite
Answer:
chlorate=Acid
peroxide=Acid
silver=Acid
zinc= Basic
nitrite=Acid
Matty told Harriet that, later that same day, he was going to try to convince her to change her attitude toward the nutritional merits of doughnuts. Based on research findings regarding persuasion, how effective is Matty's strategy?
Answer:
The correct answer is - not very effective; forewarning tends to reduce the effectiveness of an attitude change
Explanation:
The strategy of forewarning or warning before attempting any change in the psychology of an individual is found to be less effective. The subject sees a forewarning seen as a warning that a person is going to attempt to make changes in the attitude of a person about a particular thing or situation.
As a result, the person is ready to defenses up with regard to that idea of persuasion which Builds up defenses for the situation. Therefore, the effect of persuasion is reduced on the person.
Thus, Matty's strategy is not very effective; forewarning tends to reduce the effectiveness of an attitude change
I pls help me this is the question:
define the following terms below
Answer:
natural resources: materials or substances such as minerals, forests, water, and fertile land that occur in nature and can be used for economic gain.
renewable resources: a natural resource that is unlimited or that is naturally replenished rather quickly, such as sunlight or water
non renewable resources: (also called a finite resource) is a natural resource that cannot be readily replaced by natural means at a pace quick enough to keep up with consumption.
I’m screwed omg i totally forgot I have school today and forgot to do this someone help me rq I’ll brainlist plslsls be awake just make sure you write the word equation for each of the following metal oxidation reactions or if you can, also write a chemical equation below it. idrm bout that but it’ll be really nice if u did.
tried doing it and if ur one of the smart people that can do science unlike me surely u’ll help. ☺️
Answer:
Zn + O2 = ZnO
Mg + O2 = MgO
Cu + O2 = CuO
Al + O2 = Al2O3
Explanation:
Experts believe that a good night sleep is vital to a success in school. Would kids that sleep 8 or
more hours a night get better grades than kids who sleep less than 7 hours a night?
Make a hyphotesis
Answer:
kids who sleep 8 or more hours a night
Explanation:
I hypothesize that kids who sleep 8 plus hours a night because your brain needs a good night's sleep to regenerate .
What is the aim of cleaning of the iron nails before doing the experiment?
explain why crude oil is a fossil fuel
Please help
I need answers now
Answer:
this is my answer.........
En una carrera de atletismo un deportista se muestra agotado sin fuerzas para continuar y decide abandonar la carrera ¿Que alimentos tomo antes de la carrera ?
Answer:
Los alimentos para evitar la fatiga durante una carrera son alimentos bajos en grasas y altos en carbohidratos, así como alimentos bajos en fibra como pan, mantequilla de maní, plátano, jugo de frutas sin pulpa, y beber hasta aproximadamente 600 ml de líquido aproximadamente 3 horas. antes de la carrera
La comida para comer unos días antes de la carrera incluye carnes magras, arroz, pasta y verduras con contenido de almidón.
Los alimentos que se deben evitar incluyen carne roja, alimentos con alto contenido de grasas saturadas, alimentos fritos, pasteles y salchichas.
Explanation:
Why does the battery give a reading of 9V even though there are no electrons flowing around the circuit?
Answer:
because battery have it's own voltage in it's composition
The seeds of a dandelion are wispy and very light. A single dandelion produces many seeds. How does the structure of the seeds relate to the dandelion's method of spreading seeds?
A Dandelion seeds are spread mainly by the wind. Because they are light, the wind can carry them. The dandelion produces many seeds because not all seeds will land in a good location to sprout.
B. Dandelion seeds are spread primarily by becoming attached to animals' fur. Because they are light, the animals can cany many without noticing. The dandelion produces many seeds because not all seeds will land in a good location to sprout
C. Dandelion seeds are spread mainly by animals that eat them Because they are light the animals will eat many seeds. The dandelion produces many seeds in order to outcompete other plants for resources
D. Dandelion seeds are spread primarily by moving water. Because they are light, they will float on the water. The dandelion produces many seeds in order to outcompete other plants for resources. SIMIT
Answer:
the answer will be number...D
Answer:
The answer is A
Explanation:
Because dandelions are wispy and very light, the slightest gasp of wind helps carry the dandelions to new locations and help reproduce the seed into a new dandelion.