The planning and daily company activities are supported by the information infrastructure. set of potential solutions theft and security breaches - All of the options are appropriate for this Statement.
How does security work?
System, network, and resource security refers to safeguarding against illegal access, abuse, or total annihilation. It entails spotting possible risks, threats, and weaknesses; avoiding and reducing their impacts; and creating an action plan in the event of a security crisis. Educating and alerting users on security measures and best practices, such as using strong passwords, keeping laptop and device firmware current, and avoiding clicking on dubious links or files, is another aspect of security. By restricting others' ability to act, security is opposition to potential harm (or other undesirable coercive change) inflicted by others.
To know more about security
https://brainly.com/question/15278726
#SPJ4
True or False: messages sent over some shared communication lines are divided into fixed-size, numbered pieces called packets.
True. In computer networking, a packet is a unit of data that is transmitted over a network.
Packets are typically divided into smaller fixed-size units called frames when transmitted over a physical network. Packets can be further divided into smaller units called cells or segments when transmitted over a connection-oriented network, such as a telephone network or a cell phone network. The size of a packet is typically determined by the protocol being used and can vary in size from a few bytes to several kilobytes. Packets are usually numbered, allowing the receiver to reassemble them in the correct order and detect any that are lost or corrupted.
Learn more about packet, here https://brainly.com/question/17204743
#SPJ4
which of the following statements are true? local variables do not have default values. data fields have default values. a variable of a primitive type holds a value of the primitive type. all of the above
True local variables do not all have default values. Data fields come with default options. A primitive type's value is stored in a variable of that type.
Exist default values for data fields?Data fields come with default options. - No default values exist for local variables. A value of a primitive type is stored in a primitive type variable.
Which of the above techniques can be used to set up many variables with the same value at the beginning?By using = back-to-back, you can give many variables the same value. This is helpful, for instance, when setting numerous variables to the same value at the beginning. After assigning a value, it is also possible to assign a different value.
To know more about primitive type's visit :-
https://brainly.com/question/16996584
#SPJ4
with the workshop type summary query design view, group the records by workshop type, count the lastname field values, and run the query
the design view query The query results are shown in a datasheet by Access.
In Access, how can I sort a last name query?Click on the "Sort" row of the field in the QBE grid by which you want to order the results of a query in Access' query design view. Then choose "Ascending" or "Descending" order using the drop-down that appears.
How can you find a record in a database table by looking for particular information there?Click the field you wish to search in after opening the table or form. Click Find or press CTRL+F in the Find group on the Home tab. The Find tab is selected, and the Find and Replace dialog box displays.
To know more about query visit:-
https://brainly.com/question/29575174
#SPJ4
Firewall 1: Review the following firewall warning: Aug 27 16:52:43.385439 unknown kernel: [UFW BLOCK] IN= OUT=eth0 SRC=10.0.2.15 DST-1.1.1.1 LEN=95 TOS=0x00 PREC=0x00 TTL=64 ID=17221 DF PROTO=UDP SPT=46330 DPT=53 LEN=75 1. Complete the following UFW command to whitelist this packet and allow DNS requests to Cloudflare. Be as specific as possible (use "any" sparingly, if at all). ufw allow out on eth0 from to port
It automatically recognizes and alerts network administrators when there is an attempt at a security breach or unusual activity in the network.
What is the function of a firewall?Firewalls are often used to protect home networks from external network dangers such as the Internet. They can prevent unauthorized access to sensitive information and the management of network equipment. UFW does not have a specific command for listing rules, but instead utilizes its primary command, ufw status, to provide an overview of the firewall as well as a list of rules.
SSH connections should now be permitted by your firewall.
Sudo ufw show added
Output
Additional user rules (check the firewall's status with "ufw status"):
Ufw allow OpenSSH
To learn more about Firewall refer:
brainly.com/question/13339433
#SPJ4
True or False: A performance baseline is helpful in troubleshooting because it contains a backup of system critical data.
a. True
b. False
To make an effective backup plan, the very first step is to determine and identify the critical data. Hence the statement is true.
What is backup of system critical data?Organizations, individuals, and professionals mostly take backup regularly to avoid the risk of data loss.A backup plan is a plan that is created by the organizations or professionals to ensure that have backed up their essential and critical data if there is any risk of data loss. If data get loss then the organization may suffer. Because data is crucial for the organization or for professionals. If data get loss then the organization may need to minimize the downtime as much as possible. When organizations have their data backed up, then they would be in a position to restore the data that guaranty the ongoing business operations.Identify the critical data and determine the data importance: it is very first to identify the critical data for backup. In this step, data importance is determined, and the critical data are identified.To learn more about System Critical refer to:
https://brainly.com/question/27332238
#SPJ4
with contention, a computer does not have to wait before it can transmit. a computer can transmit at anytime. true or false
This claim is untrue since a computer need not wait before transmitting when there is dispute. A computer is always able to send.
What is a brief explanation of a computer?A computer is a machine that gathers input (in the type of digitalized data) that processes it in accordance with a program, piece of software, or set of instructions that specify how the information should be handled.
What makes it a computer?The phrase "computer" was first used to people (human computers) who used mechanical calculators like the arithmetic and slide rule to conduct numerical computations. Later, as overhead cranes started to take the place of human programmers, the word was used to them.
To know more about Computer visit:
https://brainly.com/question/20837448
#SPJ4
(T/F) The denial-of-service attack disrupts the network by flooding the network with messages so that regular messages cannot be processed.
By overloading the network with messages, which prevents regular messages from being processed, the denial-of-service attack breaks down the network. The use of fake source IP addresses by DoS attackers makes it more difficult to recognize the DoS messages.
What is a denial of service attack (DoS) ?An attack known as a denial-of-service (DoS) attempt aims to take down a computer system or network and prevent its intended users from accessing it. DoS attacks achieve this by providing information to the target that causes a crash or by flooding it with traffic. In both situations, the DoS attack denies expected services or resources to genuine users (i.e., employees, members, or account holders).DoS assaults frequently target the web servers of renowned businesses like media, banking, and retail enterprises as well as governmental and commercial institutions. Despite the fact that DoS assaults rarely lead to the loss or theft of important data or other assets, they can nonetheless be very time- and money-consuming for the victim to deal with.Flooding services or crashing services are the two main types of DoS attacks. Flood assaults happen when the server cannot handle the volume of traffic, which causes the system to sluggishly and eventually cease.To Learn more About DoS attackers refer to:
https://brainly.com/question/14390016
#SPJ4
imagine that you are tasked with storing digital files for a feature length movie that is in production. suggest and defend a solution that meets the needs of large data files (500 t) that can be easily accessed for editing and stored safely.
One solution that can be used to store digital files for a feature length movie in production is cloud storage.
What is cloud storage ?
Cloud storage is a reliable, secure, and cost-effective way of storing large files. It provides users with an easy way to access, edit, and share files without worrying about hardware or software limitations. With cloud storage, files can be uploaded in batches, allowing for large files to be stored quickly and easily. Additionally, cloud storage offers enhanced security through data encryption and authentication protocols, making it an ideal solution for storing large amounts of data. Finally, cloud storage can be easily scaled to meet the needs of any project, allowing for additional storage space when needed. This makes it a great solution for storing and managing large data files for a feature length movie.
To know more about cloud storage
https://brainly.com/question/18709099
#SPJ4
design a 32 bit counter that adds 4 at each clock edge the counter has reset and clock inputs upon reset the counter output is all 0
The counter is a digital sequencer, here a 4-bit counter. This simply means that you can count from 0 to 15 or vice versa depending on the counting direction (up/down).
The counter value (“count”) is evaluated on each positive (rising) edge of the clock cycle (“clk”).
If the "reset" input is logic high, the counter is set to zero.
If the "load" signal is logic high, the counter is loaded with the "data" input. Otherwise, count up or count down. If the "up_down" signal is logic high, the counter counts up, otherwise it counts down.
What are counters and their types
A counter is a sequential circuit. A well-known counter is a digital circuit used for counting pulses. Counters are the widest use of flip-flops. There are two types of counters. Asynchronous or ripple counter.
What are counters used for?
Counters are used not only to count, but also to measure frequency and time. increase memory address
To know more about counter visit;
https://brainly.com/question/29131973
#SPJ4
LAB: Reverse list Complete the reverse_listo function that returns a new string list containing all contents in the parameter but in reverse order. Ex: If the input list is. ['a', 'b', 'c'] then the returned list will be: ['e', 'b', 'a') Note: Use a for loop. DO NOT use reverse() or reverse(). 3318701732513 LAB ACTIVITY 12.11.1: LAB: Reverse list 0/10 main.py Load default template. 1 def reverse_list(letters): 2 # Type your code here. 3 4 if __name__ ='__main': 5 ch - ['a', 'b', 'c'i 6 print(reverse_list(ch)) # Should print ['c', 'b', 'o']
def reverse_list(letters): result = [] for s in letters: result = [s] + result return result if __name__ == '__main__': ch = ['a', 'b', 'c'] print(reverse_list(ch))
What exactly does a string mean?In programming, a string is a form of data use to data type rather than integers. Letters, numbers, symbols, and even spaces may all be found in a string, which is a collection of characters.
Why is a string an object?Java specifies strings as objects, in contrast to many other computer languages that describe strings as arrays. Java strings are also unchangeable. This indicates that once initialised, they cannot be changed.
To know more about String visit:
https://brainly.com/question/24275769
#SPJ4
one drawback to the sequential search is that it cannot be used with an array that contains string elements. T/F
The sequential search has the limitation that it cannot be utilized with arrays containing string elements.Thus, it is false.
What sequential search, an array contains string elements?Searching linearly over an array of strings for the supplied string is an easy fix. Performing a modified binary search is a better solution.
Get the list of arrays. Get each element of the Array List object using the for-each loop. Make sure the array list's elements all contain the necessary string. Print the elements if applicable.
We compare the given string with the middle string, just like in a standard binary search. If the middle string is empty, we linearly search on both sides for the nearest non-empty string x.
Therefore, it is false that one drawback to the sequential search is that it cannot be used with an array that contains string elements.
Learn more about string here:
https://brainly.com/question/17330147
#SPJ1
when formatting pivot tables (choose the incorrect statement)double click the column headings to change the content. right click a number and choose the number formatting option you wish. always select all the numbers in a column and then format them manually. use the design tab to select from pivottable styles.
You could want to improve the report layout and format after establishing a PivotTable and adding the fields you want to analyze in order to make the data simpler to read and scan for specifics. A PivotTable's form, fields, columns, rows, subtotals, and empty cells can all be changed to alter the layout of the table.
How can I modify the values in a field of a pivot table?You can alter the computations by selecting Show Values As from the context menu when you right-click on a value in one of the many columns.
How can I change the Excel number format?Select your preferred format by selecting Number Format from the Value Field Settings dialog box.
To know more PivotTable visit :-
https://brainly.com/question/19787691
#SPJ4
Consider the following incomplete code segment, which is intended to print the sum of the digits in num. For example, when num is 12345, the code segment should print 15, which represents the sum 1 + 2 + 3 + 4 + 5. int num = 12345;int sum = 0;/ missing loop header /{sum += num % 10;num /= 10;}System.out.println(sum);Which of the following should replace / missing loop header / so that the code segment will work as intended?
The term that should replace / missing loop header / so that the code segment will work as intended is option A: while (num > 0).
What is the header about?The body of the code is executed once for each iteration, and the header specifies the iteration.
The body of a for loop, which is executed once each iteration, and the header, which specifies the iteration, are both components. A loop counter or loop variable is frequently declared explicitly in the header.
Therefore, the module and division action inside the loop must be our main attention in order to comprehend why. The crucial thing to remember is that we are adding the numbers in reverse order and that we must repeat this process until we reach the initial number (1%10 = 1). As a result, num must equal one in order to compute the final operation.
Learn more about loop header from
https://brainly.com/question/14675112
#SPJ1
See options below
Which of the following should replace /* missing loop header */ so that the code segment will work as intended?
while (num > 0)
A
while (num >= 0)
B
while (num > 1)
C
while (num > 2)
D
while (num > sum)
E
Since they may receive thousands of applications, an admissions officer at a local college has created a proprietary program to make admission decisions more efficient. Which of the following characteristics can be used in the program to help make the decision? Select 2 options.
age
age
standardized test scores
standardized test scores
military service
military service
ethnicity
ethnicity
GPA
GPA and standardized test scores characteristics can be used in the program to help make the decision.
What is Structured Decision?An approach to child protective services known as structured decision-making (SDM) uses clearly stated and consistently applied decision-making criteria for screening for investigation, determining response priority, identifying immediately threatened harm, and estimating the risk of future abuse and neglect.
The decision maker must use judgement, evaluation, and insights into the problem definition when making an unstructured decision. Contrarily, structured decisions are repetitive and routine, and decision-makers can be effective by addressing them according to a specific process.
Structured choices are predictable, repeated, and adhere to a predetermined process. Such issues don't have solutions that depend on the decision maker's judgement or intuition. Therefore, this type of decision-making is simple and always yields the same result.
To learn more about Structured Decision refer to:
https://brainly.com/question/28304570
#SPJ1
the policies, procedures, and awareness layer of the security model includes which of the following? (select two.)
The policies, practices, and understanding element of the security model is comprised of boarding and user education.
What makes security crucial?They keep discipline in huge gatherings and reduce the possibility of riots, mob fighting, or inebriated and disorderly behavior. Security can facilitate the organization and management of circumstances like big crowds at events, job terminations, or to foster a general atmosphere of safety and order in commercial facilities. A security, in its most basic form, is a store of wealth or instrument with value that may be purchased, sold, or exchanged.
Briefing:The Guidelines, Methods, and Consciousness layer also includes steps for employee onboarding and offboarding.
Computer cages, accelerometers, and environmental rules are all part of the physical layer.
To know more about Security visit:
https://brainly.com/question/17493537
#SPJ4
Which of the following applications would be a viable reason to use write-only memory in a computer?
Question 20 options:
Using a linked list that can remove elements from the head as well as the tail
Acquiring user input from the keyboard
Preparing geometric shapes for use on a graphics card
None of the above
Note that of the following applications the one that would be a viable reason to use write-only memory in a computer is: "None of the above" (Option D)
What is write-only memory?Write-only memory, the inverse of read-only memory, started as a joking allusion to a memory device that could be recorded to but not read, as there appeared to be no practical purpose for a memory circuit that could not be retrieved.
ROM stores the instructions required for communication among various hardware components. As previously stated, it is required for the storage and functioning of the BIOS, but it may also be used for basic data management, to store software for basic utility tasks, and to read and write to embedded systems.
Learn more about write-only memory:
https://brainly.com/question/15302096?
#SPJ1
Virtual memory layout [20] You have a 64-bit machine and you bought 8GB of physical memory. Pages are 256KB. For all calculations, you must show your work to receive full credit. (a) [1] How many virtual pages do you have per process? (b) [1] How many bits are needed for the Virtual Page Number (VPN)? (Hint: use part (a)) (c) [1] How many physical pages do you have? (d) [1] How many bits are needed for the Physical Page Number (PPN)? (Hint: use part (c)) (e) [1] How big in bytes does a page table entry (PTE) need to be to hold a single PPN plus a valid bit? (f) [1] How big would a flat page table be for a single process, assuming PTEs are the size computed in part (e)? (g) [10] Why does the answer above suggest that a "flat page table" isn't going to work for a 64-bit system like this? Research the concept of a multi-level page table, and briefly define it here. Why could such a data structure be much smaller than a flat page table? (h) [4] Does a TLB miss always lead to a page fault? Why or why not?
We have 2^48 pages per person. The number of physical pages is 2^16.. 48 bits of VPN are mapped to 16 bits of PPN. The PTE size is 2B. The page table size is 2^49 B.
What are the steps to calculate pages per person, physical pages, VPN ,PTE size and the table size?We know that;
Virtual Address = 64bits
Virtual Address Space = 2^Virtual Address = 2^64B
Physical Address Space = 4GB = 4 X 2^30 B = 2^32 B
Physical Address = log_2(Physical Address Space ) = log_2(2^32)
= 32 * log_2(2) = 32 bits.
Page size = 64KB =2^16 B
a) No of Virtual Pages = Virutal Address Space/PageSize
= 2^64B / 2^16 B = 2^48
b) NoOfPhysicalPages = PhysicalAddressSpace/PageSize
= 2^32 B / 2^16 B = 2^16
c) VPN (in Bits) = log_2(NoOfVirtual Pages) = log_2(2^48) = 48
PPN(inBits)=log_2(NoOfPhysicalPages)= log_2(2^16) = 16
Thus 48 bits of VPN are mapped to 16 bits of PPN.
d) PTE( Page Table Entry) holds the Physical Page Number of given Virtual Page along with many information about the page.
PTEsize = PPN(inBits) = 16 bits = 2B
e) Flat page table is single level page table. A page table contains the Physical Page number for a given page number. It helps in the translation of Vitual Address to Physical Address.
PageTableSize = NoOfVirtualPages*PTEsize = 2^{48}*2B = 2^49
To know moe about pages refer:
https://brainly.com/question/1362653
#SPJ4
this feature in powerpoint makes slide objects move on a slide. sorting movement transition animation
Sorting movement transition animation allows you to create customized animation effects that you can leave to run on their own or synchronize with other elements.
What is powerpoint?PowerPoint is a presentation program developed by Microsoft. It is a powerful tool used to create professional-looking presentations that can include animation, text, graphics, and other elements. PowerPoint can be used to present information in a variety of formats, including slideshows, handouts, and reports. It is a very useful tool for creating presentations and can be used to create presentations for business meetings, classes, conferences, and more. PowerPoint presentations can be shared with others online or in person.
You can add movement to pictures, clip art, shapes, and text boxes. adding animation to your presentation makes it more dynamic and helps to bring points to life for the audience. you can also use animation to draw attention to a certain element on the screen.
Movement transition animation in powerpoint can be used to add movement to pictures, clip art, shapes, and text boxes. You can customize the animation effects for each object, including the speed and direction of the movement. You can also create synchronized animation between multiple objects and create effects such as bouncing, fading, and spinning. You can also adjust the duration of the animation to make it shorter or longer.
By using movement transition animation in powerpoint, you can bring your presentations to life and catch the attention of your audience. You can create customized animation effects to draw attention to a certain element or to provide a visual aid to help explain a concept. The animation can also be synchronized with other elements to create an eye-catching sequence. You can also use animation to emphasize certain points or add a sense of excitement to your presentation.
To know more about power point click-
https://brainly.com/question/1130738
#SPJ4
Two .o files have been linked together with the command line ld -o p main.o weight_sum.o. Consider the following statements:
(i) There are no more undefined symbols.
(ii) The file must be dynamically linked
(iii) The file is a relocatable object file.
(iv) The file is an executable object file.
(v) There might be one undefined symbol.
(vi) The .bss section consumes no file space.
Which of these statements are correct?
Select one:
a. Only (i) and (iv) are correct (this is not correct)
b. Only (i), (iv) and (vi) are correct (updating on my own -- this is the correct answer)
c. Only (ii) is correct
d. Only (i) and (iii) are correct
e. Only (ii) and (v) are correct
f. None of the above is correct
Only (i), (iv) and (vi) are correct, since all files are given and are connected with executables.
What is executable files?An executable file is a file that can be used by a computer to carry out different tasks or operations. An executable file, in contrast to a data file, has been compiled and cannot be read. .BAT,.COM,.EXE, and.BIN are examples of common executable files on an IBM compatible computer.
The.DMG and.APP files can be executed on Apple Mac computers running macOS. Other executable files might also exist, depending on the operating system and its configuration.
You can run our download.exe file on your computer as an example test executable. Congratulations! You've successfully downloaded an executable programme file from the Computer Hope website, says the executable file that displays this message.
Learn more about executable files
https://brainly.com/question/28943328
#SPJ4
Sala wants to unfreeze the first column of his worksheet. Which of the following series of clicks will help him do so?
a. View tab > Windows group > Freeze Panes > Freeze First Column > Unfreeze Panes
b. View tab > Windows group > Freeze Panes > Unfreeze Panes
c. View tab > Windows group > Freeze Panes > Unfreeze Panes> Arrange All
d. View tab > Windows group > Freeze Panes > Freeze Top Column > Arrange All
If Sala wants to unfreeze he should click View tab > Windows group > Freeze Panes > Unfreeze Panes.
What is unfreeze in excel?The model's name is derived from the notion that an ice block cannot be forced into a new shape without breaking. To change from one shape to another, it must first be melted (unfrozen), poured into a new mold (change), and then frozen in the new shape (refreeze).You're scrolling down your worksheet (or to the side), but a section of it is stuck. This is most likely because you decided to freeze the panes at some point. To resolve this, go to View > Window > Unfreeze Panes.Simply select the rows or columns to be frozen, then press the shortcut keys. You can use the following keyboard shortcut to unfreeze your panes: Alt + W + F + U.To learn more about freezing refer to :
https://brainly.com/question/25671785
#SPJ4
Write a program
that asks the user to enter seven
ages and then finds the sum. The input weights
should allow for decimal values.
Sample Run
Enter Age: 25.2
Enter Age: 26.7
Enter Age: 70
Enter Age: 30
Enter Age: 52.6
Enter Age: 24.4
Enter Age: 22
Sum of Ages
250.9
C++ is an extremely capable general-purpose programming language. It can be used to create operating systems, browsers, and games, among other things.
What is the program?C++ supports various programming styles such as procedural, object-oriented, functional, and so on. As a result, C++ is both powerful and flexible.Because C++ is statically typed, it compiles code faster than Python. Python is slower than C++ because it supports dynamic typing and relies on an interpreter, both of which slow down compilation.Given,
The input is entering seven ages.
The output is the sum of ages.
The C++ program code of the given problem is:
#include <iostream>
int main(int argc, char* argv[])
{
float sum = 0;
for(int i=0;i<7;i++)
{
float tmp;
std::cout << "Enter age: "; std::cin>>tmp;
sum+=tmp;
}
std::cout << "Sum of ages = " << sum << std::endl;
return 0;
}
To learn more about C++ program refer to :
https://brainly.com/question/27019258
#SPJ1
A clique of size k is a subgraph that consists of k vertices that are all connected to each via an edge, i.e., all k(k−1)/2 edges exists. In class we proved that the problem of finding whether a graph contains a k -elique is NP-complete. Consider a similar problem: a k -clique with spikes consists of 2k vertices such that the first k elements form a clique and the rest k vertices are connected via an edge a different vertex of the clique. onsider a similar problem: Given a graph G and a number k find whether a k -clique with spikes exists. Show that the problem is NP-conplete.
A k-clique is a relaxed clique in social network analysis, i.e. a quasi-complete sub-graph.In a graph, a k-clique is a subgraph where the distance between any two vertices is less than k.
What exactly is a K-clique subgraph? A k-clique is a relaxed clique in social network analysis, i.e. a quasi-complete sub-graph.In a graph, a k-clique is a subgraph where the distance between any two vertices is less than k.A graph can readily display a limited number of vertices.A clique of size k in a graph G is a clique of graph G with k vertices, which means that the degree of each vertex in that clique is k-1.So, if there is a subset of k vertices in the graph G that are related to each other, we say that graph has a k-clique.A clique is a subgraph of a graph that has all of its vertices linked. The k-clique problem is concerned with determining the biggest complete subgraph of size k on a network, and it has numerous applications in Social Network Analysis (SNA), coding theory, geometry, and so on.To learn more about A clique refer
https://brainly.com/question/1474689
#SPJ4
Question 9 of 10
While setting up a game using a modular program, the programmers want to
add a procedure to indicate what should happen when a specific event
occurs, such as when a button is pressed. What do they need to do?
A. Add a function call
B. Add a function parameter
C. Create an event handler
D. Create a control structure
E
An event handler in programming is a callback routine that runs asynchronously after an event occurs. As the player enters information, an event handler causes events to occur (clicks, keyboard input, etc)
Which event handler should be used to do a task after a file has loaded?When an object is loaded, the on-load event takes place. Onload is most frequently used in the body> element to run a script after a web page has loaded all of its content completely (including images, script files, CSS files, etc.).
What is web programming in an event?The system you are programming notifies you of events so that your code can respond to them. Events are activities or occurrences that take place in the system you are creating. For instance, you might wish to respond to a user clicking a button on a webpage by showing an information box.
to know more about programming here:
brainly.com/question/11023419
#SPJ1
Answer: c
Explanation: just took quiz
Digital ______ includes music, photos, and videos. a. animation b. multiplex c. media d. playables
Digital media includes music, photos, and videos.
What is digital media?Any communication tool that utilises one or more machine-readable data formats that are encoded is considered digital media. On a digital electronics device, digital media can be produced, seen, heard, distributed, changed, and preserved.
Media refers to ways of broadcasting or communicating this information. Digital is defined as any data represented by a sequence of digits.
Collectively, the term "digital media" refers to information delivery channels that use speakers and/or screens to broadcast digital information. Text, music, video, and photos that are sent over the internet and used for online viewing or listening are also included in this.
Learn more about digital media
https://brainly.com/question/25356502
#SPJ4
___________ is when network managers deal with network breakdowns and immediate problems, instead of performing tasks according to a well laid out plan.
a. Panicking
b. Multiplexing
c. Multitasking
d. Firefighting
e. Fireflying
Instead of carrying out activities in accordance with a well-thought-out strategy, network administrators engage in "firefighting," where they address urgent issues and network outages.
What exactly does "network" mean?A number of computers connected together to share data (such printers and CDs), online cloud, or enable electronic conversations make up a network. A network's connections to its computers can be made through cables, phone lines, radio frequencies, spacecraft, or infrared laser beams.
Why is a network crucial?Simply simply, networking entails establishing relationships with other business people. Always consider the benefits to both sides when networking. A important good, higher exposure, a larger support network, enhanced company growth, and far more meaningful relationships are a few benefits of networking.
To know more about Network visit:
https://brainly.com/question/13102717
#SPJ4
Because of the vast array of available technology, there is evidence that information technologies improve learning. true or false.
The physiological aspect of listening is hearing, which is the physiological response to sound waves striking a functioning eardrum. Interpreting is the process of putting all the information we've chosen and arranged together to make meaning of communication.
What stage of the hearing process interprets and gives meaning to the stimuli?
Selecting, organizing, and interpreting information is the process of perception. Additionally, it entails the exchange of meaning with other people. This process has an impact on communication since our responses to stimuli—whether they are people or objects—depend on how we perceive them.
Which of the following physiological processes is a passive one that receives sound waves and sends them to the brain for analysis?
Receiving sound waves and sending them to the brain, where they are evaluated, constitutes the physiological passive process of hearing.
To know more about physiological component visit;
https://brainly.com/question/11532740
#SPJ4
True or False: Modern managers need both financial and nonfinancial information that traditional GAAP-based accounting systems are incapable of providing.
Answer:True
Explanation:
Managerial accounting focuses on internal users, including executives, product managers, sales managers, and any other personnel in the organization who use accounting information for decision-making. focuses on internal users—executives, product managers, sales managers, and any other personnel within the organization who use accounting information to make important decisions. Managerial accounting information need not conform with U.S. GAAP. In fact, conformance with U.S. GAAP may be a deterrent to getting useful information for internal decision-making purposes. For example, when establishing an inventory cost for one or more units of product (each jersey or hat produced at Sportswear Company), U.S. GAAP requires that production overhead costs, such as factory rent and factory utility costs, be included. However, for internal decision-making purposes, it might make more sense to include nonproduction costs that are directly linked to the product, such as sales commissions or administrative costs.
One of the first computer aided design programs ever developed was also among the first to be integrated into ERP systems. This popular program isO Corel DrawO CADdieO AutoCADO MotoCAD
AutoCAD is one of the first computer-aided design programs that was also one of the first to be integrated into ERP systems.
What is AutoCAD?To put it simply, AutoCAD is a type of CAD software that focuses on drawing and modeling in 2D and 3D. It allows for the creation and modification of geometric models with nearly infinite potential for creating various structures and objects.Because of its versatility, AutoCAD has expanded beyond its traditional use in architecture and engineering to enter the worlds of graphic and interior design.It is a required key in AutoCAD that ensures the execution of a command and can change the function of other keys.The Area command in AutoCAD is a very useful command that can be used to calculate the area and perimeter of a closed region drawn with a polyline.To learn more about AutoCAD refer to :
https://brainly.com/question/25642085
#SPJ4
max found someone is impersonating him after discovering that data sent to him was always being received by someone else in his enterprise network. he informed the network administrator about the issue. while inspecting the switch, the administrator discovered that the threat actor was another employee at the same enterprise. as a senior security consultant, which of the following attacks should you mention in the charge sheet?
The attacks that you mention in the charge sheet is MAC cloning attack
What is a MAC cloning attack?
The operating system can be tricked into thinking it has received an ARP request from another computer using the MAC spoofing technique. This makes it possible for the attacker to enter a victim's network covertly.
MAC spoofing is a method for altering a Media Access Control (MAC) address of a network interface on a networked device that has been assigned at the factory. The network interface's hard-coded MAC address
Therefore, An attacker may also fake or copy a MAC address in order to get around security measures already in place. This is when an attacker changes their device's MAC address to match the MAC address of a trustworthy device that is either connected to the network or has just recently disconnected from it.
Learn more about MAC cloning attack from
https://brainly.com/question/14725094
#SPJ1
in this lab, your task is to: encrypt the d:\finances folder and all of its contents. add the susan user account as an authorized user for the d:\finances\2020report.xls file.
You utilise a computer that is shared at work. To prevent unauthorised users from viewing the contents of the Finances folder, you wish to secure its contents.
What is encryption?Encoding data is the process of encryption in cryptography. This technique transforms the information's initial plaintext representation into an alternate version known as ciphertext. Only parties with the proper authorization should be able to convert ciphertext to plaintext and gain access to the original data. Although encryption does not by itself stop interference, it does hinder a potential interceptor from understanding the material.An encryption technique typically employs a pseudo-random encryption key produced by an algorithm for technical reasons. Without the key, it is feasible to decrypt the message, but doing so requires a lot of computer power and expertise for a well-designed encryption scheme. With the key provided by the sender to recipients but not to unauthorised users, an authorised recipient can quickly decrypt the communication.To learn more about encryption refer to:
https://brainly.com/question/4280766
#SPJ4
