the force of attraction between the earth and objects on it is called..

unit of work is joules

power - watt

energy - joules

forced of friction increases with increase in the weight of vehicles

Answer:

Acceleration of Truck = 0.56 m/s²

Explanation:

Given information:

Mass of truck = 1,000 kilogram

Net force applied by Truck = 560 N

Find:

Acceleration of Truck

Computation:

Force = Mass x Acceleration

Net force applied by Truck = Mass of truck x Acceleration of Truck

560 = 1,000 x Acceleration of Truck

Acceleration of Truck = 560 / 1,000

Acceleration of Truck = 0.56 m/s²

Answer:

16 cm

Explanation:

Given that,

The object begins from 0 and moves 3cm towards left side followed by 7 cm towards the right and then, 6 cm towards the left side.

Let the x-axis to be the +ve and on the right side and -ve on the left

Thus, displacement would be:

= 0 -3 + 7 -6

= -2 cm

This implies that the object displaces 2cm towards the left.

While the total distance covered by the object equal to,

= 0cm + 3cm + 7cm + 6cm

= 16 cm

Thus, 16 cm is the total distance.

Answer:

Its 2 to the right

Explanation:

edge :p

11.4°C

Answer:

Solution given:

temperature [T1]=10°c

temperature [T2]=?

volume [V1]=250L

at volume [V2]=285L

now

By using Charles law

V1/T1=V2/T2

250/10=285/T2

T2=285/25

T2=11.4°C

The question is incomplete, the complete question is;

The compound magnesium phosphate has the chemical formula Mg3(PO4)2. In this compound, phosphorus and oxygen act together as one charged particle, which is connected to magnesium, the other charged particle. What does the 2 mean in the formula 5Mg3(PO4)2? A. There are two elements in magnesium phosphate. B. There are two molecules of magnesium phosphate. C. There are two magnesium ions in a molecule of magnesium phosphate. D. There are two phosphate ions in a molecule of magnesium phosphate.

Answer:

There are two phosphate ions in a molecule of magnesium phosphate.

Explanation:

The compound magnesium phosphate is an ionic compound. Ionic compounds always consists of two ions, a positive ion and a negative ion.

In this case, the positive ion is Mg^2+ while the negative ion is PO4^3-.

The subscript, 2 after the formula of the phosphate ion means that there are two phosphate ions in each formula unit of magnesium phosphate.

Answer:

Explanation:

Given data,

The formula for gravitational potential energy is,

                                 P.E = mgh joules

Substituting the values

                                  P.E = 200 x 9.8 x 45

                                         = 88,200 J

Hence, the gravitational potential energy of the crate is, P.E = 88,200 J

Answer:

v=4m/s

wavelength=6m

f=v/∧

f=0.67Hz

now, v= 1.7 m/s

f=0.67Hz

∧=v/f

∧=1.7/0.67

∧=2.54m

Explanation:

I HOPE THIS WILL HELP

PLEASE MARK AS BRAINLIEST

2.54m is the wavelength in the shallower region.

Wavelength exists the distance between identical points (adjacent crests) in the adjacent cycles of a waveform signal propagated in the area or along a wire. In wireless systems, this length exists usually specified in meters (m), centimeters (cm), or millimeters (mm).

Wavelength can be represented as the distance between two successive crests or troughs of a wave. It exists calculated in the direction of the wave.

v=4m/s

wavelength=6m

f=v/λ

f=0.67Hz

now, v= 1.7 m/s

f=0.67Hz

λ=v/f

λ=1.7/0.67

λ=2.54m.

Hence, 2.54m is the wavelength in the shallower region.

To learn more about wavelength refer to:

https://brainly.com/question/27120701

#SPJ2

Answer:

force is a derived quantity

work is a fundamental quantity

2.Force is measured in Newton why work is measured in Newton per seconds (N/s)

Explanation:

no

Answer:

Solids can hold their shape because their molecules are tightly packed together. ... Atoms and molecules in liquids and gases are bouncing and floating around, free to move where they want. The molecules in a solid are stuck in a specific structure or arrangement of atoms

Hope this helps ☆*:. o(≧▽≦)o .:*☆

Answer:

Thermodynamics.

Explanation:

Thermodynamics can be defined as the study of heat transformation into other forms of energy.

Conduction involves the transfer of electric charge or thermal energy due to the movement of particles.

Generally, when conduction relates to electric charge, it is known as electrical conduction while when it relates to thermal energy, it is known as heat conduction.

In the process of heat conduction, thermal energy is usually transferred from fast moving particles to slow moving particles during the collision of these particles. Also, thermal energy is typically transferred between objects that has different degrees of temperature and materials (particles) that are directly in contact with each other but differ in their ability to accept or give up electrons.

In Thermodynamics, heat are generally transformed to various forms of energy such as light energy.

The Law of Conservation of Energy states that energy cannot be destroyed but can only be converted or transformed from one form to another. Therefore, the sum of the initial kinetic energy and potential energy is equal to the sum of the final kinetic energy and potential energy.

Mathematically, it is given by the formula;

Ki + Ui = Kf + Uf .......equation 1

Where;

Ki and Kf are the initial and final kinetic energy respectively.

Ui and Uf are the initial and final potential energy respectively.

Additionally, the Law of Conservation of Energy is another way to describe the First Law of Thermodynamics and it states that the change of the internal energy of a system is equal to the sum of work and heat spent on it.

Mathematically, the First Law of Thermodynamics is given by the formula;

ΔU = Q − W

Where;

ΔU represents the change in internal energy of a system.

Q represents the net heat transfer in and out of the system.

W represents the sum of work (net work) done on or by the system.

Let h be the height of the water in the tube. Then the total volume of water is

(h m) (1 m²) = h m³

After dropping the ball into the water, the height of the water changes to

h m + 2.25 mm = (h + 0.0025) m

and so the contents of the tub take up (h + 0.0025) m³ of volume.

This means the ball displaces

(h + 0.0025) m³ - h m³ = 0.0025 m³

of water, which is to say that this is volume of the ball.

With a mass of 4 kg, you would find its density to be

(4 kg) / (0.0025 m³) = (4 kg) / (2.5 L) = 1.6 kg/L

Answer:

Tension force acts along the inclined plane.

Explanation:

A MASS OF 0.5 KG IS ON A SLOPE FASTENED BY A ROPE THAT PREVENTS SLIDING. WHAT FORCE DOES THE ROPE MAKE?

A mass of 0.5 kg is fastened on a slope. So there are the two components of weight.  

m g sin A acts along the plane in the downwards direction.

m g cos A acts perpendicular to the plane in upwards direction.

The force which acts of the rope as the mass is fastened is the tension force on the rope.

So, the tension force is there.

Answer:

900 windings

Explanation:

Applying,

Vs/Vp = Ns/Np............. Equation 1

Where Vs = Secondary voltage, Vp = primary voltage, Ns = Number of turns in the secondary circuit, Np = number of turns in the primary circuit

make Ns the subject of the equation

Ns = VsNp/Vp........... Equation 2

From the question,

Given: Vs = 240 V, Np = 300 windings, Vp  = 80 V

Substitute these values into equation 2

Ns = (240×300)/80

Ns = 900 windings

Complete Question:

The density of aluminium is 2.70g/cm³. The thickness of a rectangular sheet of aluminium foil varies, but is much less than 1 mm.

A student wishes to find the average thickness. She obtain the following measurements

Mass of sheet = 60.7g

Length of sheet = 50.0cm

Width of sheet = 30.0 cm

Calculate the student's values for

(i) the volume of the sheet

(ii) the average thickness of the sheet

Answer:

Thickness = 0.015 cm

Explanation:

Given the following data;

I. To find the volume of the sheet;

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the formula;

[tex] Density = \frac {mass}{volume} [/tex]

Making volume the subject of formula, we have;

[tex] Volume = \frac {mass}{density} [/tex]

Substituting into the formula, we have;

[tex] Volume = \frac {60.7}{2.70} [/tex]

Volume = 22.48 cm³

II. Volume = length * width * height

But, height = thickness

Volume = length * width * thickness

22.48 = 50 * 30 * thickness

22.48 = 1500 * thickness

[tex] Thickness = \frac {22.48}{1500} [/tex]

Thickness = 0.015 cm

Conversion:

1 mm = 0.1 cm

X mm = 0.015 cm

X = 0.015/0.1 = 0.15 mm

Therefore, the thickness of the rectangular sheet of aluminium foil is less than 1 millimetre.

Answer:

15

Explanation:

displacement = initial position - final position

Answer:

Consider the energy the earth receives from the sun. The electromagnetic waves travel thru empty space until they interact with some medium surrounding the earth: ozone, atmosphere, solids, etc.

This is contrasted to longitudinal waves such as sound waves which can only travel thru the medium with which they interact.

Answer:

The maximum force is 1.8 N.

Explanation:

A pendulum is a vertically hanging spring with a stiffness of 30 N/m and a mass of 320 g. The excitable excitation oscillates vertically around the equilibrium position with an amplitude of 6 cm. Take g = 10m/s. The magnitude of the maximum pulling force of the distance from the suspension point during the oscillation of the weight is

stiffness, K = 30 n/m

mass, m = 320 g

amplitude, A = 6 cm = 0.06 m

g = 10 m/s^2

Let the maximum acceleration is a.

[tex]a = w^2 A\\\\a = \frac{K}{m}A\\\\Force, F = m a \\\\F = K A\\\\F = 30 \times 0.06 \\\\F = 1.8 N[/tex]

Answer:

Aesthetic sports

Explanation:

Aesthetic sports are the one's that need well-developed physical qualities such as strength, agility, stamina, flexibility, and technical knowledge and artistry, in addition to technical ability and artistry. Elite athletes in these sports generally have a low abdominal fat , and the ranking is subjective.

In aesthetic sports like gymnastics, swimming, and figure skaters, dynamic and proactive flexibility is required.

Answer:

P = 5 kW

Explanation:

Given that,

Electrical energy = 432 000 000 J

Time, t = 24 h = 86400 s

We need to find the power output of the generator. We know that,

Power = work done/time

So,

[tex]P=\dfrac{432 000 000}{86400}\\\\P=5000\ W[/tex]

or

P = 5 kW

So, the power output of the generator is 5 kW.

Explanation:

the answer is B normal force is always perpendicular to the surface

Answer:

(5g/cm³)*(10cm³) = 50g

Explanation:

This is just a conversion formula. Easy to find using dimensional analysis.

(5g/cm³)*(10cm³) = 50g

Answer:

[tex]\boxed {\boxed {\sf 50 \ grams}}[/tex]

Explanation:

Density is the amount of mass per unit volume, so the formula is:

[tex]d = \frac{m}{v}[/tex]

The density of the substance is 5 grams per cubic centimeter and the volume is 10 cubic centimeters.

Substitute the values into the formula.

[tex]5 g/cm^3 = \frac{m}{10 \ cm^3}[/tex]

We are solving for the mass, so we have to isolate the variable m. It is being divided by 10 cubic centimeters. The inverse of division is multiplication, so we multiply both sides of the equation by 10 cm³.

[tex]10 \ cm^3 *5 g/cm^3 = \frac{m}{10 \ cm^3} * 10 \ cm^3[/tex]

[tex]10 \ cm^3 *5 g/cm^3 = m[/tex]

The units of cubic centimeters (cm³) cancel.

[tex]10 *5 g = m[/tex]

[tex]50 \ g=m[/tex]

The mass of the substance is 50 grams.

Answer:

Force = 3 Newton

Explanation:

Given the following data;

Mass = 200 g to kilograms = 200/1000 = 0.2 kg

Acceleration = 15 m/s²

To find the force;

Force = mass * acceleration

Force = 0.2 * 15

Force = 3 Newton

9514 1404 393

Answer:

  R/n

Explanation:

For a given voltage V across each resistor R, the current is V/R. Since there are n parallel paths, the total current is n(V/R). The effective resistance is ...

  Reff = V/I = V/(nV/R)

  Reff = R/n

Answer:

The boiling point of liquids always increases when pressure is applied on a liquid. This is because the molecules of a liquid will need more energy to turn into a gaseous state when pressure is applied on that substance.

Answer:

ysss

datvklgfvj

tdgjbc

Answer:

wrong answer because m=100

Explanation:

I think it is incorrect

Ah, I tried

Answer:

Explanation:

The dimension less constants are the constants having no dimensions and also have a constant value.

For example, 1, 2, 3... numbers, e (exponent), [tex]\pi[/tex], etc.

The dimension less variables are the variables having no dimensions.

For example, refractive index, angle, strain, etc.

8CM I suppose because he swings and goes to the next vine