the force between the earth and the body which is at a distance r from the center of the earth is F. What must be this distance for the force to be doubled.

Answers

Answer 1

Answer:

Explanation:

The gravitational force between the earth and another body is F = -GM_em/r^2 r where G = 6.67 times 10^-11 Nm^2/kg^2 is the gravitational constant, M_e = 5.97 times 10^24 kg is the mass of the earth, m is the mass of the other body, and r is the position vector of the second body with respect to the centre of the earth.


Related Questions

what give negative acceleration ?

Answers

Answer:

But negative acceleration means that the rate of change of velocity is negative or velocity decreases. Example: (1) When we apply brakes in a moving car, then negative acceleration acts on it and the car stops. (2) When we throw a ball upwards, then also negative acceleration acts on it.

Explanation:

If it helps you mark me as a brainleast

MATHEMATICALLY A NEGATIVE ACCELERATION MEANS YOU WILL SUBTRACT FROM THE CURRENT VALUE OF THE VELOCITY.

Two forces whose resultant is 100N are at right angle to eachother. if one of them makes an angle of 30° with the resultant, determine its magnitude​

Answers

Let F₁ and F₂ denote the two forces, and R the resultant force.

F₁ and F₂ point perpendicularly to one another, so their dot product is

F₁ F₂ = 0

We're given that one of these vectors, say F₁, makes an angle with R of 30°, so that

F₁ • R = ||F₁|| ||R|| cos(30°)

But we also have

F₁ • R = F₁ • (F₁ + F₂) = (F₁ F₁) + (F₁ F₂) = F₁ F₁ = ||F₁||²

So, knowing that ||R|| = 100 N, we get that

(100 N) ||F₁|| cos(30°) = ||F₁||²

(100 N) cos(30°) = ||F₁||

||F₁|| ≈ 86.6 N

(And the same would be true for F₂.)

A converging lens of focal length 20cm, forms a real image twice the size of the object. Calculate:
i) the power of the lens;
ii) the position of the image.

Answers

Answer:

Solition given:

focal length(f)=20cm

size of image(v)=2x

size of object(u)=x

we have

power of lens= reciprocal to focal length=1/20=0.05/cm

ii.

the position of the image is beyond C.

Explanation:

See the attachment !!!!!!!

1. How much heat energy ( Q ) is required to heat 2.0 kg of copper from 30.0 oC to 80.0 oC?

Answers

Answer:

38500

Explanation:

I looked it up so it may be wrong

List two factors that compression force depends on ​

Answers

The magnitude (size or numerical value) and the direction.

Hope this helps!!! :)

The fluid inside the hydraulic jack has a pressure of 30,000 Pa. If the surface of
the piston that is used to lift an object is 0.1 m’in area, how much weight can
the jack lift?​

Answers

Explanation:

p = F /A

F = P×A

F = 30,000 Pa / 0.1 m²

F = 300,000 N

Un muelle se alarga 20 cm cuando ejercemos sobre él una fuerza de 24 N. Calcula:El valor de la constante elástica del muelle

Answers

Answer:

120 Nm-1

Explanation:

Según la ley de Hooke;

F = Ke

F = fuerza sobre el resorte

K = constante de fuerza

e = extensión

Por eso;

K = F / e

K = 24N / 20 × 10 ^ -2m

K = 120 Nm-1

mercury is commonly used in thermometer give reasons​

Answers

Answer:

hi

BECAUSE MERCURY IS USED BECAUSE IT is the only liquid available in room temperature

Explanation:

pls mark as a BRAINLIST

the slope of a line on a position vs time graph is the

a. velocity
b. time
c. distance
d. displacement

Answers

It's the velocity, but only the magnitude. It can't show the direction of the velocity. So it's better to call it speed.

define 1 second time​

Answers

Answer:

define 1 second time

One second is the time that elapses during 9,192,631,770 (9.192631770 x 10 9 ) cycles of the radiation produced by the transition between two levels of the cesium 133 atom. ... One second is equal to 1/86,400 of a mean solar day.

Answer:

One part of 86400 part of a day is called one second time.

✌✌✌✌

Given: F = k· m. g
Solve for "k"

Answers

Answer:

[tex]F = kmg \\ k = \frac{F}{mg} [/tex]

Explanation:

F = k . m . g

=> F = k . mg

[tex] = > k = \frac{F}{mg} (ans)[/tex]

the weight of a body is 420 newton.calculate it's mass​

Answers

Answer:

42g

Explanation:

the mass of a body is given by

m=weight/gravity

=420/10

=42

I hope this helps

Ag,Au and Cu are called coinage metals why plzzzz hurry its urgent plzzz​

Answers

Answer:

This is because these metals are used for minting (making) coins.

Answer:

It is bcz it is used for making coins

Answer the following questions 1 What is the difference between mass and weight of an object. Will the mass and weight of an object on the earth be same as their values on Mars ? Why? ​

Answers

Answer:

difference between mass and weight is that mass is amount of matter in a material while weight is a measure of how the force of gravity acts upon that mass.the mass of an object will be same on earth and mars but its weight on both planets will be different.

20. A semiconductor is a
A) crystalline solid that conducts current under any condition
B) metallic solid that conducts current under any condition
C) metallic solid that conducts current under certain conditions
D) crystalline solid that conducts current under certain conditions

Answers

Answer:

D) crystalline solid that conducts current under certain conditions

Explanation:

A semiconductor is any crystalline solid material whose electrical conductivity is intermediary between that of insulators and conductors. That is, a semiconductor does not conduct like a conductor but does more than an insulator.

Based on this, a semiconductor is said to only conduct electricity under certain conditions as opposed to conductors that do so under any condition. Example of semiconductors are silicon, carbon, antimony, arsenic etc.

Rearrange this equation so it equals d
v=dt

Answers

Answer:

Below

Explanation:

To solve for d rearrange the formula v = (d)(t) to:

  d = v / t

I'm not to sure if you are using different variables but usually in physics the formula for velocity is v = d / t not v = dt

If you wanted to solve for displacement you would do:

  d = (v)(t)

Hope this helps!

Define measurement with 10 points

Answers

Answer:

the process of comparing unknown quantities with known standards quantities are known as measurement

derive an expression for resistivity of conductor of length l and area of cross section A​

Answers

Answer

Resistivity R = K * L / A    where resistivity is constant for material, L the length of the material and A the area of the material

K = R * A / L     where R is the resistance of the material


What kind of circuit is the one shown below?
A. Series
B. Parallel
C. Open
D. Combination

Answers

That's a parallel circuit. (B)

When current from Point-A reaches the 3-way intersection just to the right of Point-B, it has to make a choice:  Either turn left, go through B, and light the lower bulb, or go straight and light the upper bulb.

A circuit that has any "decision" points in it is a parallel circuit.  What happens in the real world is:  The current splits up.  Some of the current that reaches the intersection turns left toward Point-B, and the rest of it goes straight up.

A series circuit is one in which there's only one possible path all the way around.  There are no intersections of more than 2 roads, and no electron ever has to decide which way to flow.

An open circuit is one in which there's a break somewhere along the line and electrons can't jump across it.  It's like a railroad where a big piece is cut out of the track somewhere.  So no trains can travel on that route, and there's no current flowing anywhere in the circuit.

I'm not so sure about a "combination" circuit.  I guess you could give that name to a complicated circuit that has some series parts and some parallel-parts.  Personally, I'd call that a "series-parallel" circuit.  But it really doesn't matter right now.  Whatever the word means, the circuit in the picture is definitely not a "combination" circuit.

Answer:

B. Parallel Circuits

Explanation:

A parallel circuit is constructed by connecting the terminals of all the individual load devices so that the same value of voltage appears across each component. In a parallel circuit, charge divides up into separate branches such that there can be more current in one branch than there is in another.

hope i helped

What do is mean by environment friendly behaviour?​

Answers

Answer:
Being environmentally friendly means having a lifestyle that is better for the environment

Saul is testing an installation and discovers a short circuit what’s causing this
A.high current

B.high voltage

C.low resistance

D.low voltage

Answers

Answer:
C. Low resistance

Answer:

im pretty sure that it's (A.) High current

Explanation:

pf

not 100% sure, tho

A ball is dropped from the roof of a 25-m-tall building. What is the velocity of the object when it touches the ground? Suppose the ball is a perfect golf ball and it bounces such that the ve locity as it leaves the ground has the same magnitude but the op posite direction as the velocity with which it reached the ground How high will the ball bounce? Now suppose instead that the ball bounces back to a height of 20 m. What was the velocity with which it left the ground?

Answers

Answer:

a)  [tex]h=25m[/tex]

b)  [tex]v=19.8m/sec[/tex]

Explanation:

From the question we are told that:

Height [tex]h=25m[/tex]

Bounce Height [tex]h'=20m[/tex]

Generally the Kinematic equation is mathematically given by

[tex]V=\sqrt{2gh}\\\\V=\sqrt{2*9.81*25}[/tex]

[tex]V=22.1m/sec[/tex]

Therefore Height

[tex]h=\frac{V^2}{2g}\\\\h=\frac{22.1^2}{2*9.81}[/tex]

[tex]h=25m[/tex]

b)

Generally the Kinematic equation is mathematically given by

[tex]v^2=2ah[/tex]

[tex]v^2=2*9.8*20[/tex]

[tex]v=\sqrt{2*9.8*20}[/tex]

[tex]v=19.8m/sec[/tex]

What is not one of the main uses of springs?
A. Bike suspension
B. The seasons
C. Clock making
D. Car suspension

Quick answer

Answers

Answer:

b. the seasons

Explanation:

define electrical resistance in a metal conductor​

Answers

Answer:

Resistance is defined as the property of a conductor to resist the flow of charges through it. The resistance of conductor is numerically given as the ratio of potential difference across its length to the current flowing through it.

Explanation:

A bullet with a mass mb=13.5 g is fired into a block of wood at velocity vb=245 m/s. The block is attached to a spring that has a spring constant k of 205 N/m. The block and bullet continue to move, compressing the spring by 35.0 cm before the whole system momentarily comes to a stop. Assuming that the surface on which the block is resting is frictionless, determine the mass mw of the wooden block.

Answers

Momentum is conserved, so the sum of the momenta of the bullet and block before collision is equal to the momentum of the combined bullet-block system,

[tex]m_bv_b+m_wv_w = (m_b+m_w)v[/tex]

where v is the speed of the bullet-block system. The block starts at rest so it has no initial momentum, and solving for v gives

[tex]v = \dfrac{m_b}{m_b+m_w} v_b[/tex]

The total work W performed by the spring on the bullet-block system as it is compressed a distance x is

[tex]W = -\dfrac12kx^2[/tex]

where k is the spring constant, and the work done is negative because the restoring force of the spring opposes the bullet-block as it compresses the spring.

By the work-energy theorem, the total work done is equal to the change in the bullet-block's kinetic energy ∆K, so we have

[tex]W_{\rm total} = W = \Delta K[/tex]

The bullet-block starts moving with velocity v found earlier and comes to a stop as the spring slows it down, so we have

[tex]-\dfrac12kx^2 = -\dfrac12(m_b+m_w)v^2 \implies kx^2 = \dfrac{{m_b}^2}{m_b+m_w}{v_b}^2[/tex]

Solve for [tex]m_w[/tex]:

[tex]m_w=\dfrac1k\left(\dfrac{m_bv_b}x\right)^2-m_b[/tex]

[tex]m_w=\dfrac1{205\frac{\rm N}{\rm m}}\left(\dfrac{(0.0135\,\mathrm{kg})\left(245\frac{\rm m}{\rm s}\right)}{0.350\,\rm m}\right)^2-0.0135\,\mathrm{kg}\approx \boxed{0.422\,\mathrm{kg}}[/tex]

Does water exist on Mars? Explain your answer. Why didn't Jupiter become a star during the early.​

Answers

Answer:

yes water was discovered in mars

Why does the weight of a body differ on different celestial bodies of the universe?​

Answers

An object's weight is dependent on its mass and how strongly gravity pulls on it. The strength of gravity depends on how far away one object is from another.

why is it important to have regular super vision of the weights and the measurements in the market?

Answers

Answer:

Obeying to weights & measurement regulations in both national and international metrology legislation, standards and test procedures is a requirement to participate in any market because it's aimed to safeguard the consumers and promote fair competition, which provides efficiency and saves unnecessary costs to U.S. businesses and stakeholders.

Explanation:

In the U.S., the National Institute of Standards and Technology (NIST) has an Office of Weights and Measures (OWM) that represents the country in the International Organization of Legal Metrology (OIML)

which two phenomena make up electromagnetism?

A) moving charges in an electric current attract each other
B) permanent magnets form a magnetic field from one pole to the other pole
C) an electric current causes a magnetic field around a core of magnetic metal
D) a moving magnet causes an electric current in a magnetic metal

Answers

Explanation:

the correct answer is option ( C ) and ( D )

define Neutons 3rd law .​

Answers

Answer:

that when two object interact, they apply forces to one another that are equal in magnitude and opposite in direction.

Explanation:

Newton's third law: the law of action and reaction

Other Questions
Question 1 of 10Which phrase best completes the diagram?CORPORATION?PARTNERSHIPControlled byshareholdersLimited life spanO A. Complex regulations to startO B. Liability divided among ownersO C. Owner is free to make all decisionsO D. Few resources to hire employeesSUBMIT What caused the United States to adopt the policy of containment?a desire to prevent prosperity in GermanySoviet rejection of the Marshall Planthe spread of communism across Europethe spread of communism on several continents (philosophy)Pojman describes two arguments for moral objectivism. What are these arguments and how dothey differ? Si enfriamos mercurio de 100C. Calcular la cantidad de calor que se debe restar sabiendo que la masa de mercurio es de 1800gr He could understand it if you______it to him more clearly Finish the following table for the given function with x as the independent variable Mrs. Lachance organized her family-centered childcare facility to provide a space for parents to sit and relax as they picked up their children. She developed a coupon-sharing opportunity and set up a library with books on child-rearing. There was either a monthly breakfast or potluck in the evening in addition to bimonthly phone calls or opportunities for conferences. One Saturday a year she arranged for a gym day at the center. What characteristic of effective family involvement is this ITING THE ANSWER1. According to Turner and Wilson (2018), Information Literacy consists oftasks EXCEPT...A applying previous knowledge.C. finding appropriate informationB. determining information need.2. Outlining your problem, developing research questions, selecting keywords adeveloping concept charts are activities during...D. using information ethicallyA. communicating information.B. determining information need.C. evaluating search results.D. finding appropriate resources,3. Asking questions such as what, why, where and how is an effective way toA. craft your research questions.B. develop good keywordsC. find good informationD. understand your topic,4. In asking "what" questions, you intend to find...A. answers and solutions. What is the internal rate of return of a project costing $3,000; having after-tax cash flows of $1,500 in each of the two years of its two-year life; and a salvage value of $800at the end of the second year in addition to the $1,500 cash flow?a) 13%.b) 15%.c) 16%.d) 19%. Which letter on the map marks the area settled by French colonists?AnticOceanDA. CB. A C. DD. B What is the solution to this system of equations?2x+y = 6- - x - y = 200(1, -1)(0,8)infinitely many solutionsno solution Select the correct answer.The Richter scale measures the magnitude, M, of an earthquake as a function of its intensity, I, and the intensity of a reference earthquake, M= log (I/I) .Which equation calculates the magnitude of an earthquake with an intensity 10,000 times that of the reference earthquake? Read the statement below which of the following accurately explains which leader during the middle age of Where is the name of the building above Balance the following chemical equation.CCl4 -> ___ C+ ___ Cl2 please anyone help no wrong asnwers plss ------ What is the mistake in this sentence? Henrys vacation was filled with runnning, biking, and swimming. PLZZZZ HELPPPP IF NOT 100% SURE PLZZ DONT ANSWER! BRAINLIEST TO FIRST AND CORRECT ANSWER! Absolute Value Equations 2nd time. l'll give ya brainliest if you answer lol anywaycan someone make this sentence more like a 7th grader said it or something:The West has large open areas untouched by people. The land includes large forests, deserts, and mountains. The variety causes wide differences in weather. Hiking and camping are popular. The environment is an important issue. Ranching, lumbering, and mining are important industries. Los Angeles, Seattle, and Denver are major cities