1. The balanced chemical equation shows that for every 2 molecules of octane burned, 16 molecules of carbon dioxide are produced. Therefore, the number of molecules of carbon dioxide represented by the equation is 16.
Solutions to rest of the questions2. The balanced chemical equation shows that for every 2 molecules of octane burned, 25 molecules of oxygen are required. Therefore, the ratio of octane to oxygen is 2:25. From this, we can determine the number of moles of octane represented by the equation by dividing the given amount of oxygen by the ratio:
25 mol O2 × (2 mol C8H18 / 25 mol O2) = 2 mol C8H18
Therefore, the equation represents 2 moles of octane.
3. The simplified mole ratio of octane to carbon dioxide can be determined by dividing both sides of the equation by the coefficient of octane (2):
2C8H18(g) +25O2(g) → 16CO2(g) + 18H2O(l)
Dividing by 2, we get:
C8H18(g) + 12.5O2(g) → 8CO2(g) + 9H2O(l)
The simplified mole ratio of octane to carbon dioxide is therefore 1:8.
4. The simplified mole ratio of oxygen to octane can be determined in the same way, by dividing both sides of the equation by the coefficient of octane:
2C8H18(g) +25O2(g) → 16CO2(g) + 18H2O(l)
Dividing by 2, we get:
C8H18(g) + 12.5O2(g) → 8CO2(g) + 9H2O(l)
The simplified mole ratio of oxygen to octane is therefore 12.5:1.
Learn more about octane here https://brainly.com/question/29657423
#SPJ1
Classify each titration curve as representing a strong acid titrated with a strong base, a strong base titrated with a strong acid, a weak acid titrated with a strong base, a weak basetaed with a strong acid, or a polyprotic acid titrated with a strong base. Strong acid/Strong base/ strong base Weak acid strong base Weak base Polyprotic acid strong acid strong acid strong base mL of titrant mL of titrant mL of titrant mL of titrant mL of titrant
When it comes to titration, a titration curve is the representation of the change in pH with regards to the volume of titrant added.
The point of equivalence is where the stoichiometric amount of titrant reacts completely with the analyte being titrated.
There are several types of titration curves. Below are the classifications of each titration curve:
Strong acid titrated with a strong base. The titration curve for this scenario starts out with a pH of around 3.0, which is the pH of a strong acid. The pH rises until the equivalence point is reached. The pH then drops steeply after the equivalence point.
Strong base titrated with a strong acid. In this titration curve, the pH starts off around .11, which is the pH of a strong base. The pH drops rapidly until the equivalence point is reached. The pH then rises steeply after the equivalence point.
Weak acid titrated with a strong base. In this titration curve, the pH starts off slightly acidic due to the presence of the weak acid. The pH rises gradually until the equivalence point is reached. The pH then increases steeply after the equivalence point.
Weak base titrated with a strong acid. The pH starts off slightly basic in this titration curve due to the weak base. The pH decreases gradually until the equivalence point is reached. The pH then drops steeply after the equivalence point.
Polyprotic acid titrated with a strong base. In this titration curve, there are more than one equivalence point because the acid is capable of releasing more than one hydrogen ion.
Each equivalence point represents the point at which one mole of H+ is neutralized.
For more information about titration curve refer here
https://brainly.com/question/29590776?
#SPJ11
If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction then which way will the reaction proceed? a. The reaction is at equilibrium and the reaction will proceed at equal rates in the reverse and forward direction. b. The reaction will proceed to the right (products side) c. The reaction equation is required to answer this question d. The reaction will proceed to the left( reactants side)
If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction, then the reaction will proceed towards the right, i.e., in the direction of the products. The correct option is (b).
This is because the forward reaction is favored over the reverse reaction as there is less number of products present, and the system tends to minimize the stress caused by an increase in the number of reactants. Here, stress refers to the difference between Q and K.
In other words, if Q < K, then the system has less number of products than it should at equilibrium. Hence, the reaction proceeds in the forward direction to increase the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.
In contrast, if Q > K, then the system has more products than it should be at equilibrium. Hence, the reaction proceeds in the reverse direction to decrease the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.
Therefore, option (b) is the correct answer. The reaction will proceed to the right (product side) if Q is smaller than K.
To know more about equilibrium constant, refer here:
https://brainly.com/question/15118952#
#SPJ11
When a utensil is stored in water between uses, what are the requirements?A. Running water at any temperature, or a container of water at 70 F (21 C) or lower.B. Running water at any temperature, or a container of water at 135 F (57 C) or lower.C. Running water at 70 F (21 C) or lower, or a container of water at 70 F (21 C) or lower.D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.
D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.
Explain the significance of the line spectrum observed for the hydrogen atom by Neil bohr. What were the inadequacies of the bohr model? calculate the energy required to excite a hydrogen electron from level n=1 to n=3
The line spectrum observed for the hydrogen atom by Niels Bohr is significant because it provided evidence for the quantization of energy levels in atoms.
Bohr's model proposed that electrons in atoms occupy specific energy levels or orbits around the nucleus, and that they can only absorb or emit energy in discrete amounts as they transition between these energy levels. When an electron in hydrogen is excited to a higher energy level by absorbing energy, it eventually returns to its original energy level by emitting energy in the form of light, which is observed as the line spectrum.
However, the Bohr model had some inadequacies. It couldn't explain the spectral lines of atoms other than hydrogen, and it couldn't account for the fine structure of spectral lines due to electron spin. Also, the model violated the Heisenberg uncertainty principle, which states that it is impossible to simultaneously determine the exact position and momentum of an electron.
To calculate the energy required to excite a hydrogen electron from level n=1 to n=3, we can use the formula:
ΔE = E3 - E1 = (-13.6 eV/n²) [(1/3²) - (1/1²)]
where E1 and E3 are the energy levels corresponding to n=1 and n=3, respectively. Plugging in the values gives:
ΔE = (-13.6 eV/n²) [(1/3²) - (1/1²)] = (-13.6 eV) [(1/9) - 1] = 10.2 eV
Therefore, the energy required to excite a hydrogen electron from level n=1 to n=3 is 10.2 eV.
To know more about quantization click here:
brainly.com/question/17018137
#SPJ4
In the illustration, which solute will dissolve first? A) solute in tank B will dissolve first B) solute in tanks A and B will dissolve at equal rates C) solute in tank A will dissolve first
A) The solute in tank B will dissolve first, is the key response.Temperature, pressure, and concentration are only a few examples of the variables that affect a solute's solubility in a solvent. As the water in both tanks A and B is originally pure.
in this instance the solute in tank B will dissolve first due to its larger concentration than in tank A. The concentration gradient between the solute and the water narrows as the solute in tank B dissolves and diffuses into the surrounding water, slowing the rate of dissolution. The solute in tank A will also eventually dissolve, but because of its lower initial concentration, it will do so more gradually.I am unable to tell which solute will dissolve first because the relevant illustration is not given. However, a number of variables, including temperature, pressure, and the chemical makeup of the solute and solvent, affect how soluble a solute is in a solvent. The solute that is more soluble in the given solvent will often dissolve first. It is impossible to predict which solute will dissolve first without more details or context.
learn more about solute in tank here:
https://brainly.com/question/9589556
#SPJ4
What mass of hydrogen will react with 84g of N2
Plutonium-238 is a radioactive element used as a power source in spacecraft like Voyager and New Horizons. It has a half life of 87.7 years. Suppose we have 2 kg of plutonium-238 right now. How much plutonium will be left in 87.7 years? A) None B) 0.25 kg C) 0.5 kg D) 1.0 kg E) 2 kg
The answer is C) 0.5 kg. This is because Plutonium-238 has a half-life of 87.7 years, which means that after 87.7 years, half of the original amount of Plutonium-238 will remain. In this case, that would be 2 kg * 0.5 = 0.5 kg.
Plutonium-238 is a radioactive element used as a power source in spacecraft like Voyager and New Horizons. It has a half-life of 87.7 years. Suppose we have 2 kg of plutonium-238 right now. Radioactive decay is a random event. So, it is impossible to predict when a specific atom will decay. But we can find how much radioactive material is remaining after a specific period of time.
The half-life of a radioactive material is the time required for half of the radioactive material to decay. The formula to calculate the remaining material is:
N(t) = N0 × (1/2)^(t/t1/2)
Where N(t) is the remaining material at time t, N0 is the initial material, t1/2 is the half-life, and t is the elapsed time.
The initial material is 2 kg, half-life is 87.7 years, and the elapsed time is also 87.7 years.
N(87.7) = 2 kg × (1/2)^(87.7/87.7)= 1 kg × 0.5= 0.5 kg
Therefore, the amount of plutonium remaining after 87.7 years will be 0.5 kg. So, the answer is option C.
For more such questions on Plutonium , Visit:
https://brainly.com/question/13217330
#SPJ11
Use these two constants for the question that follows:
e = 1.6 × 10^−19 C
k = 8.99 × 10^9 N m^2/C^2
A positive charge and a negative charge are 10^−15 m away from each other. Using Coulomb's law, which of the following is the electrical force between these two particles?
230 N
−230 N
120 N
−120 N
Answer: -230 N
Explanation:
The electrical force between two point charges q1 and q2 separated by a distance r is given by Coulomb's law:
F = k * (q1 * q2) / r^2
where k is the Coulomb constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.
In this case, we have a positive charge and a negative charge, which means that q1 and q2 have opposite signs. Let's assume that the positive charge has a magnitude of q and the negative charge has a magnitude of -q. Then, the electrical force between them can be calculated as:
F = k * (q * (-q)) / r^2 = -k * q^2 / r^2
Substituting the given values of e and k, we get:
F = - (8.99 × 10^9 N m^2/C^2) * (1.6 × 10^-19 C)^2 / (10^-15 m)^2 ≈ -230 N
Note that the negative sign indicates that the force is attractive, which is expected for opposite charges. Therefore, the correct answer is:
-230 N.
In the given figure, red litmus paper is inserted in solution and colour remains unchanged then what may be contained in vessel among acid, base and salt solution? How can it be further tested to confirm it?
Answer:
Explanation: If the red litmus paper is inserted into the solution and the color remains unchanged, it indicates that the solution is likely a neutral solution or a solution with a pH close to 7. This means that it may contain either water or a salt solution.
To further confirm whether the solution contains a salt or water, we can perform a simple test using blue litmus paper. We can dip a blue litmus paper into the solution, and if it turns red, it indicates that the solution is acidic. If it remains blue, it indicates that the solution is basic.
If the blue litmus paper also does not change its color, it means that the solution is neutral or has a pH close to 7, which supports the possibility that the solution may contain either water or a salt solution.
To further test whether the solution contains a salt or not, we can perform a flame test. We can take a small amount of the solution and place it on a platinum wire loop and hold it in a Bunsen burner flame. If the flame produces a characteristic color, it indicates that the solution contains a salt. The characteristic color of the flame will depend on the metal ion present in the salt.
Overall, based on the initial test with the red litmus paper, the solution is likely neutral or close to neutral, and additional tests with blue litmus paper and flame test can be used to confirm whether the solution contains a salt or water.
students conducting research observe the rate of an enzyme-catalyzed reaction under various conditions with a fixed amount of enzyme in each sample. when will increasing the substrate concentration likely result in the greatest increase in the reaction rate?
Increasing the substrate concentration will likely result in the greatest increase in the reaction rate when the substrate concentration is lower than the concentration of the enzyme.
The concentration of the substrate affects the rate of reaction since there is a direct correlation between the number of enzyme-substrate complexes that are formed and the rate of reaction.
When there is more substrate, more enzyme-substrate complexes can form, resulting in an increase in the rate of reaction.
So, it is highly likely that when the substrate concentration is low, increasing the substrate concentration will result in the greatest increase in the reaction rate.
However, when the substrate concentration is already high, the reaction rate may not continue to increase as a result of increasing the substrate concentration.
Learn more about substrate concentration here:
https://brainly.com/question/22428921
#SPJ11
What procedures can be performed on trials 2 and 3 so that the rate of dissolving is the same as trial 1? A student wants to determine how different factors affect the rate of dissolving solid in water: Trial Size of Particles Rate_of_Dissolving small 10 sec medium 20 sec large 30 sec 2 3 What procedures can be performed on trials 2 and 3 so that the rate of dissolving is the same as trial 1? A_ the student can increase the pressure B. the student can decrease the pressure C the student can decrease the temperature D. the student can increase the temperature'
The size of particles has an effect on the rate of dissolving, but temperature is also a significant factor that affects how quickly a solid will dissolve in water. Lowering the temperature slows down the movement.
What is the temperature ?Temperature is a measure of the average kinetic energy of the particles in a substance or system. In simpler terms, it is a measure of how hot or cold something is. The temperature of a substance or system is commonly measured in degrees Celsius (°C) or degrees Fahrenheit (°F), and it can be influenced by various factors such as heat transfer, pressure, and the presence of other substances. Temperature is an important physical property that affects many aspects of daily life, including weather patterns, cooking, and the functioning of electronic devices. It is also a critical factor in many scientific processes, such as chemical reactions, phase transitions, and the behavior of materials at the atomic and molecular level.
To know more about temperature visit:
https://brainly.com/question/11464844
#SPJ1
In the pictured cell, the side containing zinc is the_________ and the side containing copper is the __________. The purpose of the Na2SO4 is to _________
In the pictured cell, the side containing zinc is the anode and the side containing copper is the cathode. The purpose of the Na2SO4 is to facilitate the transfer of electrons from the anode to the cathode.
A cell is a unit of life that is the smallest and most simple living organism, it can be classified as a complete organism, with all of the components that make up a living being, including DNA, membranes, and organelles. A voltaic cell is a device that converts chemical energy into electrical energy, it is also known as a galvanic cell or a Daniell cell. It is made up of two different metals that are submerged in an electrolyte solution that enables the transfer of electrons from one electrode to the other. The anode is the electrode that oxidizes and loses electrons during a redox reaction, this electrode is negatively charged, as it is the site of the oxidation reaction that releases electrons and generates an electrical current.
A cathode is an electrode that is reduced and gains electrons in a redox reaction, this electrode is positively charged and acts as a sink for electrons, absorbing them and using them to create a reduction reaction that generates an electrical current. The Na2SO4 in the pictured cell is an electrolyte solution that facilitates the transfer of electrons from the anode to the cathode. The salt dissociates into Na+ and SO42- ions, which then migrate toward the anode and cathode, respectively, where they can participate in redox reactions that generate an electrical current. This flow of ions helps to maintain a balance of charge in the cell and enables the transfer of electrons to occur more efficiently.
Learn more about anode at:
https://brainly.com/question/17109743
#SPJ11
A hard-working human brain, perhaps one that is grappling with physical chemistry, operates at about 25 W (1 W = 1J s-'). What mass of glucose must be consumed to sustain that power output for an hour?
Approximately 5.78 grams of glucose must be consumed to sustain a power output of 25 W for one hour.
Power = Energy/Time
25 W = Energy/3600 s
Energy = 25 W x 3600 s = 90000 J
C6H12O6 + 6O2 → 6CO2 + 6H2O + energy
The energy produced by the complete oxidation of glucose is approximately 2.8 x 10^6 J/mol. Therefore, to produce 90,000 J of energy, we need to divide 90,000 J by the energy produced per mole of glucose:
90,000 J / (2.8 x 10^6 J/mol) = 0.0321 mol
The molar mass of glucose is approximately 180 g/mol. Therefore, the mass of glucose required to sustain a power output of 25 W for one hour is:
0.0321 mol x 180 g/mol = 5.78 g
Power in physics is defined as the rate at which work is done or energy is transferred. It is a scalar quantity that measures how quickly a certain amount of energy is being transferred or converted from one form to another. The standard unit for power is the watt (W), which is equivalent to one joule per second (J/s).
In more mathematical terms, power is given by the formula P = W/t, where P represents power, W represents work, and t represents time. Power is also related to force and velocity through the equation P = Fv, where F represents force and v represents the velocity.
Power is an important concept in physics and engineering, as it is used to describe the performance of machines, engines, and other energy conversion systems. The greater the power of a system, the more work it can do in a given amount of time, and the faster it can accomplish a task.
To learn more about Power visit here:
brainly.com/question/13937812
#SPJ4
Iron nail wrapped with copper wire Determine the standard reduction potential of the cathode half-reaction, the standard reduction potential of the anode half-reaction, and the standard potential of the cell. E°cathode ____
(V) E° anode ___ (V) E° cell ___ (V)
The standard reduction potential of the cathode half-reaction is -0.36V,
The standard reduction potential of the anode half-reaction is +0.34V,
and the standard potential of the cell is -0.02V.
The cathode half-reaction is the reduction of iron (Fe²⁺) to iron (Fe):
Fe²⁺ + 2e⁻ -> Fe; E°cathode = -0.36V.
The anode half-reaction is the oxidation of copper (Cu) to copper (Cu²⁺):
Cu -> Cu²⁺ + 2e⁻; E°anode = +0.34V.
The standard potential of the cell is determined by subtracting the standard reduction potential of the anode from the standard reduction potential of the cathode:
E°cell = E°cathode - E°anode
= -0.36V - (+0.34V)
= -0.02V.
Learn more about the standard potential of the cell here:
https://brainly.com/question/19036092
#SPJ11
Give the electron geometry (eg), molecular geometry (mg), and hybridization for NH 3. a. eg = tetrahedral, mg = trigonal pyramidal, sp3 b. eg = trigonal pyramidal, mg = trigonal pyramidal, sp3 c. eg - trigonal planar, mg = trigonal planar, sp2 d. eg - trigonal pyramidal, mg - tetrahedral, sp3 e. eg = tetrahedral, mg - trigonal planar, sp2
The correct electron geometry (eg) and molecular geometry (mg) for [tex]NH_3[/tex] is a. eg = tetrahedral, mg = trigonal pyramidal, [tex]sp^3[/tex].
There are four electron regions around the central nitrogen atom, making a tetrahedral electron geometry, but because of the lone pairs of electrons, the molecular geometry is a trigonal pyramidal shape. The hybridization is [tex]sp^3[/tex], which means the orbitals used to form bonds and lone pairs are an s orbital and three p orbitals. Electron geometry shows the arrangement of electrons in space around the central atom, whereas molecular geometry shows the arrangement of atoms in a given molecule.Therefore,[tex]NH_3[/tex] have tetrahedral electron geometry, trigonal pyramidal molecular geometry and sp^3 hybridization.Learn more about electron geometry: https://brainly.com/question/7283835
#SPJ11
If 110 grams of potassium chloride are mixed with 100 grams of water at 20°C, how much will not dissolve?
76 grams of potassium chloride will not dissolve in 100 grams of water at 20°C.
What is the solubility of the potassium chloride?
The solubility of potassium chloride in water at 20°C is approximately 34 grams per 100 grams of water.
So, if 100 grams of water can dissolve 34 grams of potassium chloride, then the maximum amount of potassium chloride that can be dissolved in 100 grams of water at 20°C is 34 grams.
Therefore, the amount of potassium chloride that will not dissolve in 100 grams of water at 20°C is:
110 grams - 34 grams = 76 grams
Learn more about solubility here: https://brainly.com/question/23946616
#SPJ1
57.0 ml of 0.90 m solution of hcl was diluted by water. the ph of this diluted solution is 0.90. how much water was added to the original solution insert your answer rounded to 3 significant figure.
57.0 ml of 0.90 m solution of Hcl was diluted by water. the pH of this diluted solution is 0.90. 50.5 mL water was added to the original solution .
There are a few steps to solve this.
Here they are: First, calculate the initial concentration of HCl in the solution.
Molarity = moles of solute / volume of solution in liters.
The volume of the solution is 57.0 mL, which is 0.0570 L.
The molarity is 0.90 M. So,0.90 M = moles of HCl / 0.0570 L
Now we can solve for moles of HCl:
moles of HCl = 0.90 M x 0.0570 L = 0.0513 mol
Next, we need to use the pH to find the concentration of H+ ions.
pH = -log[H+]0.90 = -log[H+]
Solving for [H+],
we get:[H+] = 7.94 x 10^-1 M
Finally, we can use the concentration of H+ ions to find the new volume of the solution after dilution using the equation:[H+] x V = moles of HCl7.94 x 10^-1 M x V = 0.0513 mol
Solving for V,
we get: V = 6.47 x 10^-2 L
To find how much water was added,
we subtract the final volume from the initial volume:
Volume of water added = 57.0 mL - 6.47 mL = 50.5 mL (rounded to 3 significant figures)
Therefore, 50.5 mL of water was added to the original solution.
For more such questions on pH , Visit:
https://brainly.com/question/172153
#SPJ11
ion channels that open and close in response to a change in membrane potential are called _____.
Ion channels that open and close in response to a change in membrane potential are called voltage-gated ion channels.
What is Voltage-gated ion channels?Voltage-gated ion channels are a specialized type of membrane protein that are embedded in the lipid bilayer of excitable cells. They have a pore that allows ions to flow through, and they can be selective for different types of ions, such as sodium (Na+), potassium (K+), or calcium (Ca2+).
The opening and closing of the channel's pore is controlled by changes in the membrane potential, which is the difference in electrical charge across the cell membrane.
These channels are crucial for the generation and propagation of electrical signals in excitable cells, such as neurons and muscle cells. Voltage-gated ion channels are capable of detecting small changes in membrane potential and responding by opening or closing their pore, allowing ions to flow across the membrane and alter the electrical state of the cell.
Learn more about ion channels here: https://brainly.com/question/12578279
#SPJ1
The idea of __________ asserts that some evolutionary changes may not even involve intermediate forms.
punctuated equilibrium
The idea of punctuated equilibrium asserts that some evolutionary changes may not even involve intermediate forms.
What is punctuated equilibrium?The idea of punctuated equilibrium is a theory in evolutionary biology that proposes that most evolutionary changes occur relatively rapidly, with long periods of stability punctuated by rare instances of rapid evolutionary change.
The theory was first introduced by Niles Eldredge and Stephen Jay Gould in 1972 as a challenge to the traditional Darwinian theory of gradualism, which posits that evolution proceeds slowly and steadily over long periods of time.
According to punctuated equilibrium, some evolutionary changes may not even involve intermediate forms.
There are several examples of punctuated equilibrium in the fossil record, including the Cambrian explosion, which saw the sudden appearance of most major animal phyla in a relatively short period of time, and the rapid diversification of mammals following the extinction of the dinosaurs at the end of the Cretaceous period.
Learn more about Punctuated equilibrium here:
brainly.com/question/4430933
#SPJ11
when flour is mixed with water, an elastic network forms as gliadin and glutenin combine, and this is known as _____. it is both elastic and plastic and can expand with the inner pressure of gases (air, steam, and co2), allowing the bread to expand with the action of yeast.
When flour is mixed with water, an elastic network forms as gliadin and glutenin combine, and this is known as gluten. It is both elastic and plastic and can expand with the inner pressure of gases (air, steam, and co2), allowing the bread to expand with the action of yeast.
Gluten is a mixture of two proteins, gliadin and glutenin, which gives wheat dough its elastic and viscoelastic properties. When flour is mixed with water, the gluten forms an elastic network that can expand with the inner pressure of gases (air, steam, and CO2). This allows bread to rise with the action of yeast, making it light and fluffy. Gluten is also responsible for the chewy texture of bread and other baked goods that use wheat flour.
Gluten is found in wheat, barley, and rye. People with celiac disease or gluten intolerance are unable to digest gluten, and consuming it can cause a range of symptoms, including diarrhea, bloating, and abdominal pain. As a result, they must follow a gluten-free diet. Gluten-free flours made from rice, corn, and other grains can be used as a substitute for wheat flour in many recipes.
Learn more about celiac disease here: https://brainly.com/question/16779711
#SPJ11
which scientist conducted the gold foil experiment and discovered that the atom has a positively charged nucleus?
Ernest Rutherford, a New Zealand physicist, conducted the gold foil experiment and discovered that the atom has a positively charged nucleus.
In 1911, he conducted an experiment in which he fired alpha particles at a thin sheet of gold foil. The majority of the particles went straight through the gold foil, but a small percentage of the particles bounced back. He discovered that the bouncing back was caused by a small, positively charged nucleus at the center of the atom. Rutherford's experiment was crucial to our understanding of the structure of the atom. Prior to his experiment, the prevailing model of the atom was that it was a solid, indivisible sphere.
However, Rutherford's experiment showed that the atom was mostly empty space, with a positively charged nucleus at its center. This discovery paved the way for future research into atomic structure and helped to lay the foundation for the development of nuclear physics.
For more questions on Ernest Rutherford
https://brainly.com/question/28809146
#SPJ11
2. For each of the reactions below, write a structural reaction equation (which need not be balanced) by
drawing the structures of the reactant & product and name the product formed.
a) ethanol + K,Cr₂O, / H / reflux
b) ethanol + K₂Cr₂O, / H / distil
c) propan-1-ol + K,Cr₂O,/H. / reflux
d) propan-2-ol + K,Cr,O,/ H / reflux
e) 3-methylbutan-1-ol + K,Cr₂O, / H / reflux
f) 4-chloropentan-1-ol + K₂Cr₂O,/ H / distil
Answer:
a) Ethanol + K2Cr2O7 / H+ / Reflux → Acetaldehyde
CH3CH2OH + [O] → CH3CHO
b) Ethanol + K2Cr2O7 / H+ / Distil → Ethene
CH3CH2OH + [O] → CH2=CH2 + H2O
c) Propan-1-ol + K2Cr2O7 / H+ / Reflux → Propanal
CH3CH2CH2OH + [O] → CH3CH2CHO
d) Propan-2-ol + K2Cr2O7 / H+ / Reflux → Propanone (acetone)
(CH3)2CHOH + [O] → (CH3)2CO
e) 3-Methylbutan-1-ol + K2Cr2O7 / H+ / Reflux → 3-Methylbutanal
CH3CH(CH3)CH2CH2OH + [O] → CH3CH(CH3)CH2CHO
f) 4-Chloropentan-1-ol + K2Cr2O7 / H+ / Distil → 4-Chloropentanal
Cl(CH2)3CH2CH(OH)CH3 + [O] → Cl(CH2)3CH2CH=O + H2O
(please could you kindly mark my answer as brainliest)
Which change is MOST likely to occur because of the movement of the axis?
Answer:
This is due to the very slow wobble of the axis of Earth. Which change is most likely to occur because of the movement of the axis? Winter and summer months will reverse
Explanation:
hope its help you
Why do we use anhydrous diethyl ether? Choose the right answer.
A. Since Grignard reagents react with O2 to form hydroperoxides, vapors from highly volatile diethyl ether solvent prevents O2 from reaching the reaction mixture.
B. Ether molecules coordinate with grignard Reagent
C. Ether helps stabilize the Grignard reagent
We use anhydrous diethyl ether since Grignard reagents react with O2 to form hydroperoxides, vapors from highly volatile diethyl ether solvent prevents O2 from reaching the reaction mixture. Option A is the correct answer.
Anhydrous diethyl ether is commonly used as a solvent in Grignard reactions. The main reason for using anhydrous diethyl ether is to prevent the Grignard reagent from reacting with moisture or oxygen in the air, which would lead to unwanted side reactions or a reduction in the yield of the desired product.
Diethyl ether is highly volatile, and its vapors help to exclude oxygen from the reaction mixture, preventing the formation of hydroperoxides. Additionally, diethyl ether helps to dissolve the reactants and stabilize the Grignard reagent, making it more reactive towards the substrate. Hence option A is correct.
To know more about diethyl ether, here
brainly.com/question/28623053
#SPJ4
What 4 elements have many properties like iron?
Answer:
Cobalt, Nickel, Chromium, and Copper
Whats the difference between zinc amino acid chelate with any other type of zincs?
Answer:
chelated zinc is more easily absorbed than zinc on it's own.
both the cno cycle and the proton-proton chain combine 4 h nuclei to produce 1 he nucleus. would those two processes release the same amount of energy per he nucleus produced? why or why not?
The CNO cycle and the proton-proton chain don't release the same amount of energy per He nucleus produced.
Let's understand this in detail:
1. The CNO cycle produces more energy than the proton-proton chain per He nucleus produced. The proton-proton chain and CNO cycle produce energy by nuclear fusion in the sun's core.
2. In the core of the Sun, the proton-proton chain occurs. It converts four hydrogen nuclei (protons) into one helium nucleus via a series of nuclear reactions. This reaction liberates a significant amount of energy through gamma rays and neutrinos.
3. The CNO cycle also takes four hydrogen nuclei, producing one helium nucleus. The key difference between these two processes is the method in which helium is produced.
4. In the proton-proton chain, two protons combine to form deuterium. This then combines with another proton to form helium-3, and two helium-3 nuclei combine to form helium-4.
5. In the CNO cycle, hydrogen is fused with carbon, nitrogen, and oxygen isotopes to create helium. The CNO cycle releases more energy than the proton-proton chain per He nucleus produced because it has more intermediate steps.
5. The CNO cycle requires more heat and pressure to function because it involves carbon, nitrogen, and oxygen isotopes, which are heavier elements. The proton-proton chain is simpler because it only involves hydrogen and doesn't require as much energy.
Learn more about CNO cycle: What is the net equation for CNO cycle? https://brainly.com/question/19469825
#SPJ11
what is the molarity of a calcium carbonate solution if 2.00 moles of calcium carbonate are dissolved in 125 ml of water?
Answer:
To calculate the molarity of a calcium carbonate (CaCO3) solution, we first need to convert the volume of water from milliliters (mL) to liters (L).
Volume of water = 125 mL = 0.125 L
Next, we need to use the number of moles of CaCO3 and the volume of water to calculate the molarity:
Molarity = number of moles / volume of solution
Molarity = 2.00 mol / 0.125 L
Molarity = 16.0 M
Therefore, the molarity of the calcium carbonate solution is 16.0 M. However, it's important to note that this concentration is not physically possible as the solubility of calcium carbonate in water is relatively low. Therefore, it's likely that the amount of calcium carbonate that actually dissolves in 125 mL of water is much less than 2.00 moles, making the actual molarity much lower.
(Please could you kindly mark my answer as brainliest)
When the following two solutions are mixed:
K2CO3(aq)+Fe(NO3)3(aq)
the mixture contains the ions listed below. Sort these species into spectator ions and ions that react.
Drag the appropriate items to their respective bins.
NO3-)aq), Fe3+ , CO3 2-, K+
Part B
What is the correct net ionic equation, including all coefficients, charges, and phases, for the following set of reactants? Assume that the contribution of protons from H2SO4 is near 100 %.
Ba(OH)2(aq)+H2SO4(aq)?
The net ionic equation for the reaction between [tex]Ba(OH)_2(aq) and H_2SO_^4 (aq) is :2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex]
When the following two solutions are mixed:
[tex]K_2CO_3(aq) + Fe(NO_3)_3(aq)[/tex], the mixture contains the following ions:
[tex]NO_3- (aq), Fe^3+, CO_3^ 2-, K^+[/tex]. The spectator ions are NO3- (aq) and K+, and the ions that react are Fe3+ and CO3 2-.
Hence , The correct net ionic equation, including all coefficients, charges, and phases, for the reactants [tex]Ba(OH)_2(aq) + H_2SO_4(aq) [/tex] is 2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex] .
To know more about Ionic equation refer here :
https://brainly.com/question/11510759
#SPJ11
what volume of 0.0100 m mno4 - is needed to titrate a solution containing 0.355 g of sodium oxalate?
To titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.
What is Titration?Titration is a technique used in analytical chemistry to determine the concentration of a specific analyte. The method involves the gradual addition of a standard solution to a sample containing the unknown analyte until the chemical reaction between the two is complete. The concentration of the unknown analyte can be calculated once this happens.
The balanced equation for the reaction between Na₂C₂O₄ and KMnO₄ is shown below:
5Na₂C₂O₄ + 2KMnO₄ + 8H₂SO₄ → 2MnSO₄ + 10CO₂ + 5Na₂SO₄ + 8H₂O
To titrate the given sodium oxalate solution, the volume of KMnO₄ needed must be determined. The molar mass of Na₂C₂O₄ is 134.00 g/mol.
Mass of Na₂C₂O₄ = 0.355 g
Moles of Na₂C₂O₄ = (0.355 g)/(134.00 g/mol) = 0.00265 mol
From the balanced equation, it can be seen that 2 moles of KMnO₄ are required to react with 5 moles of Na₂C₂O₄. As a result, the number of moles of KMnO₄ needed can be calculated.
Moles of KMnO₄ = (2/5) × 0.00265 mol = 0.00106 mol
The volume of 0.0100 M KMnO₄ needed can now be determined using the molarity equation.
Molarity (M) = moles (n) / volume (V)
n = M × V
V = n / M = 0.00106 mol / 0.0100 M = 0.106 L = 0.0234 L (to three significant figures)
Therefore, to titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.
Learn more about Titration here: https://brainly.com/question/186765
#SPJ11
