the electric field just above the surface of the earth is roughly 100 v/m (over the entire surface) and points vertically downwards. a) calculate the total charge of the earth in coulombs (rearth

a) If the current is running from west to east, the force that our planet's magnetic field exerts on this cord is directed upwards
b) The magnitude of the force that our planet's magnetic field exerts on this cord if it is oriented so that the current in it is running from west to east is F =2.64 x 10^-4 N
c) If the current is running vertically upward, the force that our planet's magnetic field exerts on this cord is directed to the left.  west
d) The magnitude of the force that our planet's magnetic field exerts on this cord if it is oriented so that the current in it is running vertically upward is F = 0 zero
e) If the current is running from north to south, the force that our planet's magnetic field exerts on this cord is directed east.
f) The magnitude of the force that our planet's magnetic field exerts on this cord if it is oriented so that the current in it is running from north to south is F = 2.64 x 10^-4 N
g) The magnetic force is not large enough to cause significant effects under normal household conditions.

EXPLANATION

a) The direction of the force that our planet's magnetic field exerts on the cord is perpendicular to both the direction of the current and the direction of the magnetic field, according to the right-hand rule. In this case, if the current is running from west to east, and the magnetic field is from south to north, the force will be directed upwards.

b) The magnitude of the force can be calculated using the formula:

F = BIL sin(theta)

where B is the magnitude of the magnetic field, I is the current, L is the length of the wire, and theta is the angle between the direction of the current and the direction of the magnetic field. In this case, theta is 90 degrees, so sin(theta) = 1. Substituting the given values, we get:

F = (0.550 x 10^-4 T) x (1.50 A) x (2.40 m) x 1

= 2.64 x 10^-4 N

Therefore, the magnitude of the force is 2.64 x 10^-4 N.

c) If the current in the wire is running vertically upward, the force will be directed towards the west.

d) Using the same formula as in part (b), we can calculate the magnitude of the force:

F = (0.550 x 10^-4 T) x (1.50 A) x (2.40 m) x sin(90)

= 0

Therefore, the magnitude of the force is zero.

e) If the current in the wire is running from north to south, the force will be directed towards the east.

f) Using the same formula as in part (b), we can calculate the magnitude of the force:

F = (0.550 x 10^-4 T) x (1.50 A) x (2.40 m) x 1

= 2.64 x 10^-4 N

Therefore, the magnitude of the force is 2.64 x 10^-4 N.

g) The magnitude of the magnetic force in this case is quite small, and under normal household conditions, it is unlikely to cause significant effects. However, in some situations, such as in electrical power transmission systems, the effects of the magnetic force may need to be taken into account.

For more such questions on magnetic field

https://brainly.com/question/13689629

#SPJ11

The magnetic field at the center of the loop is calculated to be 0.159 T.

The magnetic field at the center of a flat, circular loop with 17 turns, a radius of 12.5 cm, and a current of 0.60 A can be determined by using the equation B = µ₀.n.I/2.π.r, where

Using this equation, the magnetic field at the center of the loop is calculated to be 0.159 T.

Learn more about magnitude of the magnetic field: brainly.com/question/30640184

#SPJ11

Answer:

It is true that in accordance with Newton's third law of motion, every action has an equal and opposite reaction, meaning that when one object exerts a force on another object, the second object exerts an equal and opposite force back on the first object. However, this does not necessarily mean that the objects will not accelerate.

Acceleration depends on the net force acting on an object, which is the sum of all forces acting on the object. If the forces are balanced (i.e. they are equal and opposite), then there is no net force and the object will not accelerate. However, if the forces are unbalanced (i.e. they are not equal and opposite), then there is a net force and the object will accelerate in the direction of the net force.

For example, if you push a book across a table with a force of 5 N to the right, the book will experience a force of 5 N to the left due to friction. These two forces are equal and opposite, but they are not balanced because they act in opposite directions. The net force on the book is therefore 5 N to the right, which causes the book to accelerate in that direction.

If the magnetic field steadily decreases from B to zero during a time interval t, the magnitude E of the induced emf is given by the formula; E = (Bx-y/t), where B is the magnetic field, x, and y are constants.

An induced emf is the voltage generated across a conductor when it moves through a magnetic field. It is also induced when there is a change in the magnetic field passing through a conductor.

The emf generated in a coil of wire is equal to the rate of change of magnetic flux through the coil. Magnetic flux is given by the formula: φ=B*A,

where -  B is the magnetic field strength and

           - A is the area of the coil.

If the magnetic field steadily decreases from B to zero during a time interval t, the change in magnetic flux is given by the formula:  Δφ=B*A = B*ΔA, where ΔA is the change in area over time Δt.

The induced emf E is given by the formula: E = (-N * Δφ)/Δt

Where N is the number of turns in the coil. If the magnetic field is steadily decreasing, then ΔB/Δt is constant, and the induced emf E is given by the formula:  E = (-N * B * ΔA/Δt) = (-N * B * x*y/t) = (Bx-y/t), where x and y are constants.

Learn more about magnetic fields here:

https://brainly.com/question/26257705

#SPJ11

As given, the motorcyclist starts from rest and reaches a speed of 6 m/s

after traveling with uniform acceleration for 3 seconds.

Here, initial velocity u=0

Final velocity v=6 m/s

Time t=3 sec.

Let the acceleration of the motorcycle be a.

On using the equation of motion, v=u+at

6=0+3×a

Or 3a=6

Or a=63

Or a=2 m/s2

→Therefore, the acceleration in a motorcycle is 2 m/s2.←

The minimum angular velocity (in rpm) for swinging a bucket of water in a vertical circle without spilling any is 5.56 rpm.

The minimum angular velocity (in rpm) for swinging a bucket of water in a vertical circle without spilling any is given by the formula; Vmin=√g/R

where:

To express the answer in revolutions per minute, the radius of the circle must be converted to meters;R = 35 cm = 0.35 m

Substituting the values given above into the formula;

Therefore, the minimum angular velocity (in rpm) for swinging a bucket of water in a vertical circle without spilling any is 5.56 rpm.

Learn more about velocity: https://brainly.com/question/25749514

#SPJ11

We always see the same side of the Moon because the "Moon rotates on its axis once for each revolution around Earth." Thus, the correct option will be B.

When the Moon rotates on its axis once for each revolution around Earth, then we always see the same side of the Moon. The reason behind this is that the moon's rotation takes almost the same time as it takes to orbit the Earth.

When the same side of the moon is facing the Earth, it appears to be unchanging. That is why we always see the same side of the moon from Earth. The other side of the Moon is known as the far side, which was first observed by the Soviet spacecraft Luna 3 in 1959.

Therefore, the correct option will be B.

Learn more about Moon here:

https://brainly.com/question/13538936

#SPJ11

EER is defined as the Energy Efficiency Ratio which is the ratio of cooling capacity in BTU/hr to the power input in watts.

The EER of the given 8000 Btu/h air conditioner is 5.33 Btu/hour per watt.

In the case of the given 8000 Btu/h air conditioner that requires a power input of 1500 W, the EER can be calculated as follows:

EER = (cooling capacity in Btu/hr) / (power input in watts)

EER = 8000 Btu/hour / 1500 W = 5.33 Btu/hour per wat.

Energy efficiency ratio (EER) is used in the USA and is defined as the system output in Btu/h per watt of electrical energy.

Coefficient of performance (COP) is the equivalent measure using SI units, which is widely used in the UK. A COP of 1.0 equates to an EER of 3.4.

To know more about power:https://brainly.com/question/11569624

#SPJ11

The expression for the magnitude of the force exerted on the firefighter by the pole can be expressed as  F = mg + ma.  

Where m is the mass of the firefighter,

g is the acceleration due to gravity, and

a is the acceleration of the pole

In order to find an expression for the magnitude of the force, F, exerted on the firefighter by the pole, we need to consider the forces acting on the firefighter.

According to Newton's second law of motion, the force acting on an object is equal to its mass multiplied by its acceleration. In this case, the forces acting on the firefighter are the gravitational force, which is pulling the firefighter downwards with a force of mg, and the force exerted on the firefighter by the pole, which is pushing the firefighter upwards with a force of ma. Therefore, the total force acting on the firefighter is given by the sum of these two forces, which is: F = mg + ma

Thus, this expression gives us the magnitude of the force exerted on the firefighter by the pole. Here, m is the mass of the firefighter, g is the acceleration due to gravity, and a is the acceleration of the pole. if the pole is not accelerating (i.e., if a = 0), then the expression reduces to F = mg, which is the gravitational force acting on the firefighter.

To know more about Magnitude please visit :

https://brainly.com/question/30337362

#SPJ11

If you drop a solid iron ball and a hollow iron ball of the same diameter from the same height at the same time, Aristotle's prediction would be that the solid iron ball will fall faster than the hollow iron ball.

Aristotle, who lived in ancient Greece, believed that heavier objects would fall faster than lighter ones. This was a commonly held belief at the time, but it has since been proven incorrect through scientific experiments.

In reality, when dropped from the same height at the same time, both the solid iron ball and the hollow iron ball of the same diameter would fall at the same rate, neglecting air resistance. This is because the rate at which an object falls is determined by its mass and the force of gravity acting on it, which are the same for both balls.

This was first demonstrated by Galileo Galilei in the late 16th century through his famous experiment involving dropping objects from the Leaning Tower of Pisa. He showed that objects of different masses would fall at the same rate in a vacuum and that air resistance was the primary factor that caused objects to fall at different rates in the real world.

In summary, Aristotle would have predicted that the solid iron ball would fall faster than the hollow iron ball, but this prediction has been shown to be incorrect by scientific experiments.

More on Aristotle can be found here: https://brainly.com/question/5399979

#SPJ1

The frequency that the bad guy hear is 12000 hz when the police car is moving with speed of 80m/s.

For more information on doppler effect kindly visit to

https://brainly.com/question/15318474

#SPJ1

For the electric flux through a spherical surface is 4.3 x 10⁴ N⋅m²/C, then the net charge enclosed by the surface is μC, and for the electric flux through a cubical box 34 cm on a side is 7.5 x 10³ N⋅m²/C, the total charge enclosed by the box is μC.

The electric flux through a spherical surface is 4.3 x 10⁴ N⋅m²/C.

The net charge is Electric Flux = Charge / Surface Area,

so the net charge enclosed is 4.3 x 10⁴ / (4πr²) where r is the radius of the sphere.

Therefore, the net charge enclosed by the surface is μC.

The electric flux through a cubical box 34 cm on a side is 7.5 x 10³ N⋅m²/C.

The total charge is Electric Flux = Charge / Surface Area,

so the total charge enclosed is 7.5 x 10³ / (6a²)

where a is the length of one side of the cube.

Therefore, the total charge enclosed by the box is μC.

Learn more about electric flux here:

https://brainly.com/question/2664005

#SPJ11

For a given water velocity (distance traveled per unit time), the greater the cross-sectional area of a stream channel, the lower will be the stream flow (discharge: volume of water per unit time)" is a false statement.

Stream discharge is measured by the volume of water flowing per unit of time, which is calculated by multiplying the stream's cross-sectional area (flow width × flow depth) by its water velocity. As a result, the given statement is false.

According to the formula, an increase in the cross-sectional area of the stream will cause a rise in the stream flow (discharge: volume of water per unit time) because it is multiplied by the velocity. So, for a given water velocity, the greater the cross-sectional area of a stream channel, the higher the stream flow (discharge: volume of water per unit time) will be.

Learn more about Stream discharge here:

https://brainly.com/question/8282980

#SPJ11

The magnitude of the mass's acceleration as it passes through the lowest point of its motion is 0.34g.

option D.

At the lowest point of the pendulum's motion, the tension in the string is equal to the weight of the mass, and the direction of the tension is horizontal. Therefore, the vertical component of the gravitational force on the mass is balanced by the tension in the string, and the net force on the mass is the horizontal component of the gravitational force.

The horizontal component of the gravitational force is given by:

F = mg sinθ

where;

At the lowest point of the pendulum's motion, this force provides the centripetal force required to keep the mass moving in a circular path.

Therefore, we can set this force equal to the centripetal force:

F = mv²/r

where;

The radius of the circular path is equal to the length of the string, L. We can express v in terms of the height h that the mass has fallen from its initial position:

v² = 2gh

where;

Substituting the expressions for F and v² into the equation for the centripetal force, we get:

mg sinθ = mv²/r

mg sinθ = m(2gh)/L

g sinθ = 2gh/L

Solving for the acceleration a = g sinθ, we get:

a = 2gh/(L sinθ)

Substituting the given values, we get:

a = 2 * 9.81 m/s² * (sin 20°) / (L)

a ≈ 0.34g

Therefore, the magnitude of the mass's acceleration as it passes through the lowest point of its motion is approximately 0.34 times the acceleration due to gravity, or 0.34g.

So the correct option is (d) 0.34g.

Learn more about acceleration of pendulum here: https://brainly.com/question/26449711

#SPJ1

The ratio of the man's running speed to the sidewalk's speed is 6.3.

To solve the problem, we can start by using the formula:

distance = speed × time

Let's assume that the length of the moving sidewalk is L, and the speed of the man is v and the speed of the sidewalk is u.

When the man runs along the sidewalk from one end to the other, his speed relative to the ground is (v + u), and the distance he covers is L. Therefore, we have:

L = (v + u) × 2.00 s

When the man runs back along the sidewalk to his starting point, his speed relative to the ground is (v - u), and the distance he covers is also L. Therefore, we have:

L = (v - u) × 12.6 s

Now we can solve for v/u by dividing the two equations:

(v + u)/(v - u) = 2.00/12.6

Solving for v/u gives:

v/u = (2.00/12.6 + 1)/(2.00/12.6 - 1) = 6.3

Therefore, the ratio of the man's running speed to the sidewalk's speed is 6.3.

For more similar questions on distance:

brainly.com/question/12356021

#SPJ11

In a conservative system, the total energy is conserved, which means that the initial energy (ei) is equal to the final energy (ef).

Conservative systems are those where the total energy remains constant over time, such as in a pendulum swinging back and forth or a planet orbiting a star under the influence of gravity.

In such systems, the energy can be converted from one form to another, but the total amount of energy remains constant.

Therefore, we can say that in a conservative system, the initial energy (ei) and the final energy (ef) are equal. This means that any changes in the system's energy, such as potential energy being converted into kinetic energy, must be balanced by an equal and opposite change in some other form of energy, such as potential energy being converted into kinetic energy.

Learn more about conservation of energy here: https://brainly.com/question/166559

#SPJ1

The work done on the block by friction during the motion of the block from point A to point B is 2.49 J.

The normal force acting on the block at point A and point B is different. We can find the weight of the block at points A and point B using the following formula:

Weight = mg,

where m is the mass of the block and g is the acceleration due to gravity.

Weight at point A = m × g

Weight at point B = m × g

Now, the normal force acting on the block at point A is given as 3.95 N.

Therefore, we can write the equation for the weight and normal force as:

Weight at point A - Normal force at point A = m × a

Now, at point A, the acceleration acting on the block is the centripetal acceleration a = v²/R where v is the velocity of the block at point A.

We can write the equation for the weight and normal force as:

m × g - 3.95 = m × v²/R

Similarly, at point B, we can write the equation for the weight and normal force as:

m × g - 0.680 = m × v²/R

Now, we can solve both the equations for the velocity of the block at point A and point B:

Velocity at point A, v₁ = √(gR - 3.95/m)

Velocity at point B, v₂ = √(gR - 0.680/m)

The change in kinetic energy during the motion from point A to point B is given by:

∆KE = KE₂ - KE₁

= (1/2)mv₂² - (1/2)mv₁²

We know that work done, W = ∆KE

So, the work done on the block by friction during the motion of the block from point A to point B is given by:

W = (1/2)m(v₂² - v₁²)

Substituting the values in the above equation:

W = (1/2) × 0.0400 × ((√(9.81 × 0.500 - 0.680/0.0400))² - (√(9.81 × 0.500 - 3.95/0.0400))²)

W = 2.49 J

Therefore, the work done on the block by friction is 2.49 J.

Learn more about Friction here:

https://brainly.com/question/24338873

#SPJ11

Low-level convergence that causes air to rise can occur in all the following settings except the collision of two wind systems such as occurs along the equator.

Convergence- The word convergence refers to the act of moving toward union or uniformity. The concept of convergence refers to the tendency of separate procedures, technologies, or devices to become more similar as they evolve over time. It may also allude to the coming together of things or people. Convergence is a term used to describe the process of a single entity that is composed of formerly separate parts or functions. It is when two or more phenomena, such as technologies, industries, or societies, come together to form a unified whole.

Low-level convergence that causes air to rise can occur in all the following settings except the collision of two wind systems such as occurs along the equator. As the wind blows, it encounters a variety of barriers that impede its forward movement. One type of barrier is a topographic barrier, such as a mountain range, which causes the wind to rise and cool as it passes over the summit. As a result, air pressure decreases, and the air cools as it rises, eventually reaching saturation and forming clouds. As a result, topography can lead to precipitation on the windward side of the mountain and aridity on the leeward side.

To learn more about "low-level convergence", visit: https://brainly.com/question/31183165

#SPJ11

Answer:

[tex]\boxed{5427N}[/tex]

Explanation:

We use the well-known equation:

[tex]F=m\cdot a[/tex]

where:

so, we can rewrite the equation like this:

[tex]F= (810kg)(6.7m/s^2)\\F=5427N[/tex]

So, taking into account the statement as seen in the image, your answer must be correct.

[tex]\text{-B$\mathfrak{randon}$VN}[/tex]

The correct comparison of the energy generation processes is "The Sun generates energy by fusing small nuclei into larger ones, while our power plants generate energy by the fission (splitting) of large nuclei". Thus, the correct options are A and B.

Nuclear reactions involve the alteration of an atom's nucleus in both cases. Nuclear power plants and the sun both use energy generated by these nuclear reactions to produce electricity. The difference is in the type of nuclear reaction that takes place.

In the Sun, nuclear fusion is the process by which atomic nuclei of low atomic number fuse to form a heavier nucleus with the release of energy. The energy produced in this way is what makes the Sun so hot and bright. In a nuclear power plant, nuclear fission is the process by which the nucleus of an atom is split into two smaller nuclei.

The energy that is released in the process is used to heat water, creating steam that drives a turbine, which in turn drives a generator to produce electricity.

Therefore, the correct options are A and B.

Learn more about Nuclear power here:

https://brainly.com/question/18769119

#SPJ11

The magnitude of the current's magnetic field at radial distances (a) 0, (b) 1cm, (c) 2cm (wire's surface), and (d) 4cm are undefined, 1.7 * 10^-3 Tesla, 1.7 * 10^-3 Tesla, and 8.5 * 10^-4 Tesla, respectively. 

The question is about finding the magnitude of magnetic fields at different radial distances across a diameter of a long cylindrical conductor of radius a=2 cm carrying uniform current 170A.

Let's solve it step by step.

(a) At radial distance 0:

At the center of the conductor, r = 0, the magnetic field is zero.

It can be found by using the formula for the magnetic field at the center of the wire: 

B = (μ_0 * I) / (2 * π * r)

= (4π * 10^-7 * 170) / (2π * 0)

= undefined.

Therefore, the magnetic field at r = 0 is undefined. 

(b) At radial distance 1cm:

Using the formula for the magnetic field at a point P located at a radial distance r from the center of the wire: 

B = (μ_0 * I) / (2 * π * r)

= (4π * 10^-7 * 170) / (2π * 0.01)

= 1.7 * 10^-3 Tesla.

(c) At radial distance 2cm:

The magnetic field at r = a (i.e., the surface of the wire) can be determined by substituting the value of r = 2cm into the magnetic field formula:

B = (μ_0 * I) / (2 * π * r)

= (4π * 10^-7 * 170) / (2π * 0.02)

= 1.7 * 10^-3 Tesla.

(d) At radial distance 4cm:

Again, we use the formula for the magnetic field at a point P located at a radial distance r from the center of the wire:

B = (μ_0 * I) / (2 * π * r)

= (4π * 10^-7 * 170) / (2π * 0.04)

= 8.5 * 10^-4 Tesla.

For similar question on magnetic field

https://brainly.com/question/26257705

#SPJ11

Answer: The answer is D. Thermal Energy.

Explanation:

Thermal energy is a type of kinetic energy owing to the fact that it results from the movement of particles.

When the 35.0-g bullet moving at 475 m/s strikes the 4.4-kg bag of flour, the momentum of the bullet is transferred to the bag of flour, causing the bag of flour to move and the bag moving when the bullet exits at 91.3 m/s.

We can calculate the velocity of the bag of flour after the collision using conservation of momentum:

Here we have the following data as :

Momentum of bullet before collision = Momentum of bullet and bag after collision

m bullet × v bullet, before = (m bullet + m bag) bag × v bag, after

We can solve for v bag ,after:

v bag ,after = (m bullet × v bullet, before) / (m bullet + m bag)

v bag, after = (35.0 g × 475 m/s) / (35.0 g + 4.4 kg) = 91.3 m/s

Therefore, the bag of flour is moving at 91.3 m/s when the bullet exits.

Read more about mass here:

https://brainly.com/question/1838164

#SPJ11

After the helium flash in a star, the core quickly heats up and expands.

A helium flash is the very brief thermal runaway nuclear fusion of significant amounts of helium into carbon during the red giant phase of low mass stars (between 0.8 solar masses (M) and 2.0 M). The centre expands as a result of the core becoming warmer as a result of this.

Following the onset of helium nuclear reactions in a star's core, helium nuclei fuse to create carbon and oxygen.

Most of the time, the stars' positions in reference to one another remain constant. Convergence between Orion and Taurus is ongoing. Ursa Minor is never far from Draco. The stars appear to us as an endless backdrop painting in the sky that hardly moves in reference to one another.

To know more about stars:

https://brainly.com/question/29572549

#SPJ4

Explanation:  Gases move from high-pressure areas to low-pressure areas. And the bigger the difference between the pressures, the faster the air will move from the high to the low pressure.

The final enrichment would be 97.5%, which is the amount of U235 in the total fuel, divided by the total weight of the fuel.

Uranium from one bomb = 1 tons = 1000 kg. Uranium required for one reactor = 40,000 kg Percent enrichment of U-235 in uranium used for bomb = 100%.

Enrichment = (% of U-235 / % of U-238) +1

Natural Uranium contains 0.711% of U-235.

Calculations: As we know that Uranium from one bomb = 1 tonne = 1000 kg.

To obtain a total of 40,000 kg of fuel needed by one reactor for startup, we need to mix 40 bombs. Let's find out the total mass of U-235 present in 40 bombs:

Total mass of U-235 = 1000 × 40 = 40,000 kg.

Enrichment = (% of U-235 / % of U-238) +1

Let the percentage of U-238 = X

Enrichment = (100/ X) + 1

We know that Natural Uranium contains 0.711% of U-235, So the percentage of U-238 in natural uranium will be 99.289%

Let X = 99.289%

Enrichment = (100/ 99.289%) + 1

Enrichment = 1.007%

Thus, the mass of natural uranium used = 40,000/0.007 = 5,71,42,857.14 kg (approx)

Final enrichment = 1.007%

To learn more about the uranium :

https://brainly.com/question/179933

#SPJ11

The equations for the balance of forces in the horizontal and vertical directions for Block A and Block B are:                                                                    Horizontal direction of Block A: T = 12.5 N,Vertical direction of Block A: W = 24.5 N,Horizontal direction of Block B: T = 22.5 N and Vertical direction of Block B: W = 44.1 N.

The forces acting on Block A are: Force of tension (T) and Force of gravity (W).The forces acting on Block B are: Force of tension (T) and Force of gravity (W).For Block A in the horizontal direction, the force exerted will be the force of tension (T).

Therefore: Horizontal direction of Block A: T = mA a ………………….. (1)           For Block A in the vertical direction, the force exerted will be the force of gravity (W).                                                      

Therefore: Vertical direction of Block A: W = mA g ………………….. (2)              For Block B in the horizontal direction, the force exerted will also be the force of tension (T).                                              

Therefore: Horizontal direction of Block B: T = mB b ………………….. (3)            For Block B in the vertical direction, the force exerted will be the force of gravity (W).                                                              

 Therefore: Vertical direction of Block B: W = mB g ………………….. (4)

The equations can be solved by substituting the values of the masses and the acceleration due to gravity. Therefore, equations (1) to (4) will become:

Horizontal direction of Block A: T = 2.5 (5) = 12.5 N                                       Vertical direction of Block A: W = 2.5 (9.8) = 24.5 N                                        Horizontal direction of Block B: T = 4.5 (5) = 22.5 N                                     Vertical direction of Block B: W = 4.5 (9.8) = 44.1 N

Therefore, the equations for the balance of forces in the horizontal and vertical directions for Block A and Block B are:

Horizontal direction of Block A: T = 12.5 N                                                        Vertical direction of Block A: W = 24.5 N                                                         Horizontal direction of Block B: T = 22.5 N                                                     Vertical direction of Block B: W = 44.1 N

More on forces: https://brainly.com/question/14932990

#SPJ11

The sunspot cycle is directly relevant to us here on earth because coronal mass ejections and other activity associated with the sunspot cycle can disrupt radio communications and knock out sensitive electronic equipment.

The sunspot cycle is directly relevant to us here on earth because it can cause coronal mass ejections and other activity that can disrupt radio communications and knock out sensitive electronic equipment. It also plays a major role in global warming, affects compass needles, affects plant photosynthesis, and strongly influences the earth's weather.

This means that the sunspot cycle can have a significant impact on our technology and communication systems, which are critical to our daily lives. Coronal mass ejections can cause major geomagnetic storms that have the potential to knock out power grids, damage satellites, and disrupt GPS signals. These storms can also create beautiful auroras that are visible in many parts of the world, but they can also have serious consequences for our infrastructure.

The sun's magnetic field, which plays a major role in the sunspot cycle, affects the compass needles that we use on earth. This means that the sunspot cycle can also have an impact on navigation systems, which are important for transportation and other industries.

Overall, the sunspot cycle strongly influences Earth's weather and can affect plant photosynthesis here on earth. This means that changes in the sunspot cycle can have a significant impact on our planet and our daily lives.

To learn more about the sunspot cycle follow

https://brainly.com/question/30615197

#SPJ11

A ball is thrown upwards and caught when it comes back down. In the presence of air resistance, the speed with which it is caught is C. less than the speed it had when thrown upwards.

When a ball is thrown upwards, it gains kinetic energy due to the force exerted by the thrower. Then, as it ascends, it loses kinetic energy and gains potential energy as it moves higher up. Finally, the ball comes to a stop, its kinetic energy becoming zero, and its potential energy reaches its maximum value. At the top, the ball begins to fall back to the ground.The air resistance opposes the motion of the ball, slowing it down as it travels upwards.

When the ball starts coming back down, the air resistance exerts an additional force, which slows down the ball and reduces its speed. As a result, the speed with which it is caught is less than the speed it had when thrown upwards. Hence, option (C) is correct.

Learn more about kinetic energy at:

https://brainly.com/question/22174271

#SPJ11

18.75 m/s² is the acceleration brought on by gravity on the unidentified planet.

9.8 m/s2 is the acceleration caused by gravity at or close to the surface of the Earth. The force of gravity causes items to fall towards the ground.

The acceleration brought on by gravity on the unidentified planet may be calculated using the equation of motion for a falling object:

d = 1/2 * g * t²

where d is the object's displacement, g is the acceleration brought on by gravity, and t is the passing of time.

This equation can be changed in order to account for g:

g = 2 * d / t²

Plugging in the given values:

d = 1.5 m

t = 0.4 s

g = 2 * 1.5 m / (0.4 s)²

g = 18.75 m/s²

To know more about acceleration visit:-

https://brainly.com/question/30660316

#SPJ1