The decomposition of nitric oxide to molecular nitrogen and oxygen occurs at high temperatures according to the reaction:

N2(g)+O2(g)⟺2NO(g)Kc=0.81

At the start of the reaction, 0.34 mol N2, 0.34 mol O2 and 1.2 mol NO are introduced into a 0.75 L reaction chamber and allowed to equilibrate.

Required:
What is the concentration of NO (in M) at equilibrium?

Answer:

Nitrogen does not show allotropy because of its small size and high electronegativity. The single N-N bond is weaker than P-P bond because of high inter electronic repulsions among non-bonding electrons due to the small bond distance. Hence it does not show allotropy.

Answer:

The nitrogen atom has short inter-bond distance, hence highly electronegative in terms of magnitude. This creates no relation in energy varieties hence no allotropes formed.

Nitrogen atom is also very small.

Answer:

Neither Tech A nor B is correct

Explanation:

Combustion is a chemical reaction that occurs when a chemical molecule(s) interacts quickly with oxygen and produces heat.

When hydrocarbon undergoes a complete combustion reaction, they produce water and CO2.

Tech B is also incorrect because the main purpose of a catalytic converter is to accelerate and speed up the chemical reaction rates, Hence, they are not involved in chemical reaction formation. Catalytic converters are utilized as a control device in exhaust emission to lessen the effect of toxic gas fumes.

Answer:

Propilen là một chất khí không màu với mùi giống như dầu mỏ. Propilen nhẹ hơn nước và tan rất ít trong nước 0.61 g/ . Không hòa tan trong các dung môi phân cực như nước, chỉ tan trong dung môi không phân cực hay ít phân cực.. Propilen không có tính dẫn điện.

The sum of the squares of two sides of a right angle is equal to the square of the hypotenuse

Answer:

6.63 M

Explanation:

NaCl(s) ---> Na^+(aq) + Cl^-(aq)

Given that [Na^+] = [Cl^-] = s

Where s= concentration of the both ions

Ksp = s^2

s= √Ksp

s= √43.9

s= 6.63 M

The concentration of Na (in M) obtained when it begins to crystallize out of solution is 6.63 M

The solubility of product (Ksp) is defined as the concentration of products raised to their coefficient coefficients. This is illustrated below:

mX <=> nY + eZ

Ksp = [Y]^n × [Z]^e

NaCl(aq) → Na⁺(aq) + Cl¯(aq)

Ksp = [Na⁺] × [Cl¯]

43.9 =  y × y

43.9 = y²

Take the square root of both side

y = √43.9

y = 6.63 M

Thus, the concentration of Na⁺ is 6.63 M

Learn more about solubility of product:

https://brainly.com/question/4530083

Answer:

50.0 moles C02

Explanation:

First write down the CORRECTLY balanced equation. NOTE: The equation you provide is incorrect.

2C2H2(g) + 5O2(g) ==> 4CO2(g) + 2H2O(g)  CORRECT EQUATION

Next, look at the stoichiometric ratio of C2H2 to CO2.  You can see it is 2 moles C2H2 produces 4 moles CO2.

Thus, 25.0 moles C2H2 x 4 moles CO2/2 moles C2H4 = 50.0 moles CO2

Answer:

Explanation:

I am almost sure that the products are identical.

Answer:

U are a fool

Explanation:

Because you didn't even asked a question

Answer:

k.

Explanation:

Answer:

liquid will be evaporated while solid remains

Answer:

Biolage is the answer

Explanation:

Because it's price is third most

Answer: c

Explanation:   Filtration is technically defined as the process of separating suspended solid matter from a liquid

Pulp is a lignocellulosic fibrous material prepared by chemically or mechanically separating cellulose fibers from wood, fiber crops .

Many commercial juices are filtered to remove fiber or pulp.

The correct answer is C, Pulp.

Orange is an example of a citrus fruit. Every citrus fruit has a pulp. The of pulp a citrus fruit is that stringy content in the endocarp of the fruit .

The pulp of a citrus fruit is where its juice is found.

When you want to prepare orange juice, you need to remove the pulp of the citrus fruit. This is done by filtering out the pulp from the juice.

Filtration is the process of removing larger particles. For a liquid juice, filtration is the process of removing solid particles from the orange juice.

https://brainly.com/question/11403039

Answer:

18.82 mg

Explanation:

From the given information:

The molar mass of CO2  is calculated as follow

= (12 + (16 ×2))

= 44

The mass of carbon is determined by dividing the mass no of carbon from co2 by the molar mass of CO2,  followed by multiplying it by 69.00 mg

= [tex](\dfrac{12}{44}\times 69 )[/tex]

=(0.2727 × 69 )

= 18.82 mg

Answer:

Pure water has an acidity of about 7 on the pH scale. -is a chemical property of pure water. Pure water has an acidity of about 7 on the pH scale

Answer: không màu , không mùi không vị

Explanation:

Answer:

a. True

Explanation:

An atom can be defined as the smallest unit comprising of matter that forms all chemical elements. Thus, atoms are basically the building blocks of matters and as such determines or defines the structure of a chemical element.

Generally, atoms are typically made up of three distinct particles and these are protons, neutrons and electrons.

A chemical reaction can be defined as a chemical process which typically involves the transformation or rearrangement of the atomic, ionic or molecular structure of an element through the breakdown and formation of chemical bonds to produce a new compound or substance.

Hydrogen is the simplest chemical element that exists. The symbol for the chemical element hydrogen is "H" and it is a colourless, tasteless, odorless, and highly flammable gas.

It is a chemical element found in group (1) of the periodic table and as such it has one (1) electron in its outermost shell. Thus, hydrogen has an atomic number of one (1) and a single valence electron because it has only one (1) proton and one (1) electron in its nucleus.

In Stoichiometry, two hydrogen atoms interact to form a hydrogen molecule, with each atom having a single electron in the 1S orbital. These hydrogen atoms react with each other due to the presence of a balanced attractive and repulsive force, which produces a strong covalent bond (H-H) in the hydrogen molecule.

Energy is released in the form of heat when the electrons in the orbitals of the two (2) hydrogen atoms form a covalent bond (H-H); thus, it's an exothermic chemical reaction.

Answer:

V₂ = 0.154 Liters

Explanation:

Pressure => P

Volume   => V

Temperature => T

mass (moles) => n

This problem...

P₁ = 1.00 ATM     P₂ = 3.25 ATM

V₁ = 0.500L       V₂ = ?

T₁ =  constant    T₂ = T₁ = constant

n₁ =  constant     n₂= n₁ = constant

P₁V₁/n₁T₁ = P₂V₂/n₂T₂  => V₂ = V₁(P₁/P₂) = 0.500L (1.00ATM/3.25ATM) = 0.154 Liters

Answer:

5.37% w/w is the mass percent of vinegar assuming a molarity of 0.8935mol/L

Explanation:

Assuming the molarity of vinegar is 0.8935mol/L:

Mass percent is defined as 100 times the ratio between mass of solute (In this case, acetic acid), and the mass of the solution

To solve this question we need to find the mass of acetic acid from the moles using the molar mass and the mass of the solution from the volume in liters using the density:

Mass Acetic acid -Molar mass: 60.052g/mol-

0.8935mol * (60.052g / mol) = 53.656g Acetic Acid

Mass Solution:

1L = 1000mL * (1.00g/mL) = 1000g Solution

Mass Percent:

53.656g Acetic Acid / 1000g Solution * 100 =

The mass percent of acetic acid in the original sample of vinegar of molarity 0.8935mol/L is 5.37% w/w.

Mass percent of any solute present in any solution will be calculated as the:

Mass % of solute = (mass of solute / mass of solution) × 100

Let the molarity of vinegar = 0.8935mol/L

Means 0.8935 moles of vinegar present in the 1 liter of the solution.

Now we calculate mass from moles as:

n = W/M, where

W = required mass

M = molar mass = 60.052g /mol

W = (0.8935mol)(60.052g/mol) = 53.656g

Mass of solution = 1L = 1000mL×(1.00g/mL) = 1000g Solution

Then the mass % of acetic acid:

Mass % = (53.656g / 1000g) × 100 = 5.37% w/w

Hence the required % mass is 5.37% w/w.

To know more about mass percent, visit the below link:
https://brainly.com/question/26150306

Answer:

Yah, it's a neutral oxide

Explanation:

[tex]{ \bf{2H_{2(g)} +O_{2(g)} \: →2H _{2}O _{(l)} }}[/tex]

Answer:5m

Explanation:Because in the question it say per minute so it would be 5 times m

Explanation:

here's the answer to your question

Iodine's neutral atom has the following electronic configuration: 1 s² 2 s² 2 p⁶ 3 s² 3 p⁶ 4 s² 3 d¹⁰ 4 p⁶ 5 s² 4 d¹⁰ 5 p⁵. The complete ground-state electron configuration of I⁻ is  [Kr]5s² 4d¹⁰ 5p⁶.

Electronic configuration is defined as each electron moves individually within an orbital while being surrounded by an average field produced by all other orbitals. The electron configuration is used to describe an atom's ground state orbitals, but it may also be used to depict an atom that has ionized into a cation or anion by making up for any lost or gained electrons in the orbitals after it.

The ground state electronic configuration is defined as the configuration of lower energy electrons surrounding an atom's nucleus. Ground state is defined as the least energetic state feasible for a physical system.  It is important because permits us to determine the location of the excited electrons' departure and return when they release a photon.

Thus, iodine's neutral atom has the following electronic configuration: 1 s² 2 s² 2 p⁶ 3 s² 3 p⁶ 4 s² 3 d¹⁰ 4 p⁶ 5 s² 4 d¹⁰ 5 p⁵. The complete ground-state electron configuration of I⁻ is  [Kr]5s² 4d¹⁰ 5p⁶.

To learn more about electronic configuration, refer to the link below:

https://brainly.com/question/14283892

#SPJ2

Answer:

I say Star S has radial motion

Explanation:

I'm not sure if it right but let me know if you have any other questions

Answer:

This is an acid-base reaction (neutralization): Ba(OH) 2 is a base, H 2SO 4 is an acid. This is a precipitation reaction: BaSO 4 is the formed precipitate.

Answer:

Explanation:

We are to match each land resource to what they are being used for.

Clay             →→→  used to make pottery and tiles

iron ore       →→→  used to make steel

Salt              →→→   used as a flavoring in food

aggregate   →→→   used in construction

graphite       →→→ used to make batteries

Clay is a kind of soil particle that forms as a result of weathering processes. Examples include; pottery clays, glacial clays, and deep-sea clays e.t.c. The presence of one or more clay minerals, as well as variable quantities of organic and detrital components, characterizes all of them. Clay is usually sticky and moist when wet, but hard when dry. They are used in the making of tiles and potteries.

Iron ore:  The iron ore deposits are found in the Earth's crust's sedimentary rocks. They're made up of iron and oxygen that mix during the chemical process in marine and freshwater. iron ores are used to produce almost every iron and steel product that we use today.

Aggregate: are utilized in construction activities. It is a material used to mix cement, gypsum, bitumen, or lime to produce concrete in the construction industry.

Graphite: Graphite is a mineral that occurs in both igneous and metamorphic rocks. It is generally generated on the earth's surface when carbon is exposed to high temperatures and pressures. It is mainly used in the production of batteries and electrodes,

The Adsorbent is used as part of the stationary phase and has an affinity for the solvent and the chemical components of the mixture.

The adsorbent has a high affinity for solvent and the chemical components of the mixture.

Chromatography is a method of separation in which the mixture of substances is introduced into a mobile phase (solvent). The separation occurs as the solvent interacts with an adsorbent(stationary phase).

The extent of separation of the components of the mixture depends on the extent of interaction between the mobile and the stationary phase . This interaction also determines the retention factor (Rf) of the separation.

For a definition of chromatography, see

https://brainly.com/question/19334271

Answer:

1.94 × 10⁻³

Explanation:

Step 1: Calculate the concentration of H⁺ ions

We will use the definition of pH.

pH = -log [H⁺]

[H⁺] = antilog -pH = antilog -2.32 = 4.79 × 10⁻³ M

Step 2: Calculate the acid dissociation constant (Ka) of the acid

For a monoprotic weak acid, whose concentration (Ca) is 0.0118 M, we can use the following expression.

Ka = [H⁺]²/Ca

Ka = (4.79 × 10⁻³)²/0.0118 = 1.94 × 10⁻³

The number of shapes that has the same number as the red oval is; 5

All the shapes has the same number as the red oval exempt the shape at the bottom right, this is because the text in the bottom right shape has one 8  missing at the end before 622.

Hence the number of shapes that has the same number as the red oval is 5

Learn more : https://brainly.com/question/24388778

Answer:

Vanlency of hydrogen - 11

Electrons of hydrogen - 1

Answer:

The answer is: 1

Hope this helps :) <3

Explanation:

Answer:

It is known that 1 mol of a molecule contains 6.023×1023 6.023 × 10 23 number of molecules. So, 0.25 moles of CO2 C O 2.

The correct option for the given question about Mole Concept is Na / 2 atom of oxygen.

In 1 mole number of molecules of CO₂ = Na (Avagadro Number)

In 0.25 mole number of molecules of CO₂ = 0.25 × Na molecules

In 1 molecule number of oxygen atom = 2 atom

In 0.25 × Na molecules number of oxygen atom = 2 × 0.25 × Na atom

In 0.25 × Na molecules number of oxygen atom = 0.5 × Na atom

So in 0.25 mole of CO₂ number of oxygen atom = Na / 2 atom

Thus we can conclude that in 0.25 mole of CO₂ number of oxygen atom will be Na / 2, where Na is Avagadro Number.

Learn more about Mole Concept here:

https://brainly.com/question/16488605

#SPJ2

Answer:

A chemical bond is a lasting attraction between atoms, ions or molecules that enables the formation of chemical compounds. The bond may result from the electrostatic force of attraction between oppositely charged ions as in ionic bonds or through the sharing of electrons as in covalent bonds.

Explanation:

You have to put energy into a molecule to break its chemical bonds. The amount needed is called the bond energy. After all, molecules don't spontaneously break