The sleep command stores your work, disables the hard drive and computer fans, and then switches the computer to a lower-power mode. closing down.
What is Sleep mode?Electronic devices like computers, televisions, and remote control devices can operate in a low power mode called sleep mode (or suspend to RAM). These modes allow users to resume operations without having to issue new commands or wait for a machine to reboot, and they significantly reduce electrical consumption compared to leaving a device fully on.The computer goes into a lower-power state when the sleep command caches your work, turns off the hard disk and computer fans. Many gadgets use an LED power light that pulses or is red to indicate this power mode.In order to keep the RAM running and be ready to respond to a wake-up event, a computer needs to use some energy even when it is dormant. In several nations, standby power for a sleeping computer is regulated. For instance, the One Watt Initiative in the United States places restrictions on this power.Hence, The sleep command stores your work, disables the hard drive and computer fans, and then switches the computer to a lower-power mode. closing down.
To learn more Sleep mode refer to:
https://brainly.com/question/27583320
#SPJ4
Currently, the iMAC is an important product for Apple. While the personal computer market is not growing very quickly, Apple maintains a large share___cash cow
The iMAC is a crucial item for Apple right now. Even though the personal computer market is not expanding significantly, Apple continues to be a cash cow with a sizable market share.
What do you mean by cash cow of Apple ?A market leader with a large (or greatest) market share in a niche with little to no growth is considered a cash cow. Although I am unsure if Stanford's MS in Computer Science is the industry leader, I firmly believe that the market for computer science will continue to increase. The cash cow for Apple (AAPL) is the iPhone. Apple can put the extra money made by the iPhone's sales into other goods or projects since its return on assets is much higher than its rate of market growth.
In the Apple BCG matrix, there are two goods that are the money makers. These include iMacs, Apple MacBooks, and Apple iTunes. These goods have enhanced the company's cash flows and kept their market share over time.
To learn more about cash cow refer to:
https://brainly.com/question/13975134
#SPJ4
A survey conducted using software only without visiting the site is referred to as being __________. predpredictive
In order to estimate how wireless signals will spread throughout a space, a predictive survey uses network technologies.
How to do predictive site survey?Survey questions that automatically suggest the best potential responses based on the question's language are known as predictive research questions.
Network technologies created to forecast how wireless signals would spread through a space are used in predictive surveys. The input consists of a thorough set of blueprints and details on the kind of wireless equipment that is suggested, such as the Wi-Fi standard that the location will employ.
The evaluation of factors at one point in time in order to anticipate a phenomenon assessed at a later point in time.
A WiFi site survey tool that enables you to simulate the deployment of WiFi access points in a simulated RF environment is required to carry out a predicted site survey. On the other hand, post-installation surveys are completed utilizing WiFi heatmapping software on the spot.
Therefore, the answer is Predictive.
To learn more about survey refer to:
https://brainly.com/question/14610641
#SPJ4
the use of simulation in competitive situations such as military games and business games is known as .
The use of simulation in competitive situations such as military games and business games is known as Monte Carlo methods.
What is Monte Carlo methods?In order to get numerical results, a large family of computational techniques known as "Monte Carlo procedures" or "Monte Carlo experiments" uses repeated random sampling. The fundamental idea is to employ randomness in order to find solutions to issues that, in theory, might be solved deterministically. They are frequently applied to mathematical and physical issues, and they are most helpful when using other ways is challenging or impossible. Creating draws from a probability distribution, numerical integration, and optimization are the three problem types where Monte Carlo methods are most frequently applied.Monte Carlo methods are helpful for simulating systems with numerous connected degrees of freedom, such as fluids, disordered materials, strongly coupled solids, and cellular structures, in physics-related problems (see cellular Potts model, interacting particle systems, McKean–Vlasov processes, kinetic models of gases).To learn more about Monte Carlo methods refer to:
https://brainly.com/question/29737518
#SPJ4
you wish to determine the total number of orders (column c) placed by all salespeople (names). what excel formula would be best to use.
The COUNTIF function will tally the number of cells that satisfy a particular requirement.
How do I utilize Excel's Countifs for text?In Excel, there is a built-in function called COUNTIFS that counts cells in a range according to one or more true or false conditions. The following is typed: =COUNTIFS(criteria range1, criteria range1, [criteria range2, criteria2],...)
What is an example of Countifs?Cells with dates, numbers, or text can all be counted using this technique. For instance, COUNTIF(A1:A10,"Trump") counts the number of cells that have the word "Trump" in them. the latter counts the values in a single range based on a single condition. read more function.
To know more about COUNTIF visit:
https://brainly.com/question/13640484
#SPJ4
Application software for an information system is usually a series of pre-programmed software modules supplied by a software publisher. t/f
True, An information system's application software often consists of a number of pre-written software modules that are provided by a software publisher.
What kind of software is intended to create additional software?Software that is used to create other software is called programming software. The majority of these tools offer programmers a setting where they may create, test, and convert code into a form that can be executed on a computer.
What is software for applications?Software for applications. the group of computer programs that assist a user with things including word processing, emailing, keeping tabs on finances, making presentations, editing images, enrolling in online courses, and playing games.
To know more about software visit:-
https://brainly.com/question/1022352
#SPJ4
In a reaction, A+B→ Product, rate is doubled when the concentration of B is doubled and rate increases by a factor of 8 when the concentrations of both the reactants (A and B) are doubled. Rate law for the reaction can be written as :A. Rate =k[A][B]2B. Rate =k[A]2[B]2C. Rate =k[A][B]D. Rate =k[A]2[B]
The correct rate law for this reaction is option C: Rate = k[A][B].
What is rate of chemical reaction?The rate of a chemical reaction is typically expressed as the change in the concentration of one of the reactants or products over time.
The rate law is an equation that describes how the rate of the reaction is related to the concentrations of the reactants.
In this case, the rate of the reaction is doubled when the concentration of reactant B is doubled, and the rate increases by a factor of 8 when the concentrations of both reactants are doubled.
This can be described by a rate law of the form Rate = k[A][B], where k is the rate constant for the reaction and [A] and [B] are the concentrations of reactants A and B, respectively.
To Know More About reactants, Check Out
https://brainly.com/question/29775547
#SPJ4
From this menu you can shut down you computer, access configuration settings, update software, put your Mac to sleep, restart, log out, access recent items, and learn about your Mac.Apple Menu
The Apple menu is a menu located in the top left corner of the screen on a Mac computer, represented by the Apple logo.
What is Apple menu?It is a central location from which you can access a variety of options and features related to your Mac, including shutting down or restarting your computer, accessing configuration settings, updating software, putting your Mac to sleep, logging out, accessing recent items, and learning about your Mac.
To access the Apple menu, you can click on the Apple logo in the top left corner of the screen.
This will bring up a drop-down menu with the various options and features mentioned above. You can then select the option you wish to access or use by clicking on it.
Some of the options and features available through the Apple menu may vary depending on the version of the operating system you are using and the specific settings and preferences you have configured.
To Know More About MAC, Check Out
https://brainly.com/question/29388563
#SPJ4
distributed file system (dfs) is a role service under the file and storage services role that enables you to group shares from different servers into a single logical share called a namespace. T/FTrue
A distributed file system allows you to combine shares from multiple servers into a single logical share known as a namespace, So the given statement is true.
What is distributed file system?A distributed file system (DFS) is a file system that allows clients to access file storage from multiple hosts over a computer network in the same way that they would access local storage. Files are distributed across multiple storage servers and locations, allowing users to share data and storage resources.The Distributed File System (DFS) functions enable the logical grouping of shares across multiple servers and the transparent linking of shares into a single hierarchical namespace. DFS uses a tree-like structure to organize shared resources on a network.They can be implemented using one of two DFS methods, which are as follows: DFS namespace on its own. DFS namespace that is domain-based.It entails conducting exhaustive searches of all nodes and, if possible, moving forward and backtrack if necessary.To learn more about distributed file system refer to :
https://brainly.com/question/20228376
#SPJ4
a tool preset can be used to store all brush-related settings, such as brush shape, blending mode, and opacity, in a single selection. t/f
A tool preset can be used to store all brush-related settings, such as brush shape, blending mode, and opacity, in a single selection. This statement is true.
What is meant by single selection ?An answer option or form control that allows a user to select one from a group of related options is known as a single-select.
Because it chooses or disregards a single action (or, as we'll see in a moment, a single collection of actions), the if statement is a single-selection statement. Because it chooses between two distinct actions, the if... else statement is referred to as a double-selection statement (or groups of actions).
For each characteristic or parameter on a view, selection lists provide the user with a comprehensive list of all possible options. You can choose the suitable property or parameter value from a list using a selection list.
To learn more about single selection refer to :
https://brainly.com/question/3374927
#SPJ4
Write a short note on the following in Microsoft Excel
1). MAX FUNCTION.
2). MIN FUNCTION.
3). AVERAGE FUNCTION.
4). INT FUNCTION
5). POWER FUNCTION
Answer:
Explanation:
1). The MAX function in Microsoft Excel is used to find the maximum value in a range of cells. For example, if you have a range of cells A1:A10 containing a set of numbers, you can use the formula "=MAX(A1:A10)" to find the maximum value in that range.
2). The MIN function in Microsoft Excel is used to find the minimum value in a range of cells. It works in a similar way to the MAX function, but returns the minimum value instead of the maximum value.
3). The AVERAGE function in Microsoft Excel is used to calculate the average of a set of values. It takes a range of cells as input and returns the mean of the values in that range.
4). The INT function in Microsoft Excel is used to round a number down to the nearest integer. It takes a number as input and returns the integer part of the number.
5). The POWER function in Microsoft Excel is used to calculate the value of a number raised to a certain power. It takes two arguments: the base number and the exponent. For example, the formula "=POWER(2,3)" returns 8, because 2 raised to the power of 3 is 8.
in the c/c program write a separate function for bubble sort. set up a timer using the time() function and record the time difference for the assembly and for the c/c function for sorting. to get meaningful reading, the array should have 10,000 elements or more. the two functions should be given the same, unsorted array to work with. the recorded time differences should be displayed on the console.
#include <stdio.h>
#include <time.h>
#include <stdlib.h>
//Define the size
#define SIZE 12000
//Time
time_t start, stop;
//Array
int arr[SIZE];
void bubble_sort(int a[]) {
for(int i=0;i<SIZE;i++) {
for(int j=0;j<SIZE-i;j++) {
if(a[j]>a[j+1]) {
int tmp = a[j];
arr[j] = arr[j+1];
arr[j+1] = tmp;
}
}
}
}
int main(int argc, char* argv[]) {
//Random filling
srand(time(NULL));
//Array initialization
for(int i=0;i<SIZE;i++) {
arr[i] = rand() % 100;
}
//Bubble sort
start = time(NULL);
bubble_sort(arr);
stop = time(NULL);
//Print the time difference between stop and start.
printf("Time difference is: %.2f s.\n",difftime(stop,start));
return 0;
}
Ron is a junior web developer working on a web site that will function as the primary public facing site of a video game development company called Amazing Games Inc. Ron's immediate, superior (Lucy) has asked Ron to prepare a development server on a cloud provider to serve as a staging server where Ron can verify his site functions properly prior to moving it to the live production server. After 2 weeks of working on a portion of the site on the development server, Ron finishes up the pages that he has been working on. Everything works fine. When he moves the site to the production server, none of the images or CSS files work properly. The images appear as broken links. What is the most likely cause for the problem? O Ron used image types that are not compatible with the staging server but are compatible with the deployment server O Ron used images type that are compatible with the staging server but not compatible with the deployment server O Ron modified the host file on the development server to redirect DNS on the development computer and did not do so on the deployment server O Ron used absolute pathing to reference the files on the development server
An absolute path is used to specify the complete precise file path, for instance, D:\http\project\lib\file.php. A relative path, on the other hand, is based on the script's location in the current working directory.
Comparing absolute and relative paths?A relative path identifies a file's location in relation to the active (working) directory*. The distance from the root directory is specified by an absolute path. Relative file paths are frequently used while learning to access data files through programming.
What characteristics make a path an absolute path?Any file in Windows can have its absolute path found by right-clicking it and selecting Properties. Look at the "Location:" entry in the file properties, which is the path to the file, first.
To know more about absolute pathing visit :-
https://brainly.com/question/28873563
#SPJ4
In general terms, the cloud refers to high-power, large-capacity physical _____ located in data centers, and each one typically hosts multiple _____.
A data center's high-power, large-capacity physical servers, each of which often houses several virtual servers, are referred to as the "cloud" in general.
By cloud computing, what do you mean?A type of abstraction known as "cloud computing" is built on the idea of pooling real resources and presenting them to consumers as virtual resources. In the simplest terms, cloud computing refers to the practise of storing and accessing data and software on remote servers located online rather than a computer's hard drive or local server.
A virtual server: what is it?In contrast to dedicated servers, virtual servers pool hardware and software resources with other operating systems (OS).
To learn more about cloud computing visit:
brainly.com/question/11973901
#SPJ4
___________ search refers to an internet search on websites such as Yelp. ___________ search refers to knowledge based on personal experience
External search refers to an internet search on websites such as Yelp. Internal search refers to knowledge based on personal experience.
What is internet search?An internet search, also referred to as a search query, is a submission to a search engine that produces both paid and organic results. Ads at the top and bottom of the page are considered paid results and are labelled as such. The unmarked results that show up in-between the ads are the organic results.
A keyword is the essential component of an internet search. Likewise, search engine marketing (SEM) and search engine optimization are driven by keywords (SEO). The practise of placing advertisements on search engine results pages is known as search engine marketing, also referred to as paid search (SERPs).
Learn more about search engine
https://brainly.com/question/512733
#SPJ4
wireless internet access points enable users with computers and mobile devices to connect to the internet wirelessly. TRUE
Wireless internet access points enable users with computers & mobile devices to connect to internet wirelessly. (True)
What is Wireless internet?Wireless Internet service providers (WISP) who broadcast wireless Internet signals in a specific geographic area are typically the ones who offer wireless Internet. Satellite signals or radio waves are typically used to deliver wireless Internet.
Wireless Internet is typically slower than wired Internet connections because it is a communication medium that is dependent on the environment. A wireless Internet modem, wireless access card, or Internet dongle is typically needed by the end user to connect to wireless Internet.
Two popular types of wireless Internet are WiMax and EV-Do. Wi-Fi connections inside of a house, office, or local network may also be used to access the Internet wirelessly.
Learn more about wireless Internet
https://brainly.com/question/26956118
#SPJ4
Rows can be grouped into smaller collections quickly and easily using the _____ clause within the SELECT statement.
Rows can be grouped into smaller collections quickly and easily using the GROUP BY clause.
What is clause?Clause is defined as a formula expressing a proposition made up of a limited number of literals (atoms or their negations) and connectives. A literal disjunction of one or more. It is a section of text in a Prolog program that ends with a full stop. A fact or a rule could be a clause.
GROUP BY
DIFFICULTY: Hardiness: Easy
Grouping Data REFERENCES: 7-7b
LEARNING OBJECTIVES: 07.04 - Combine data from several rows in groups.
Thus, rows can be grouped into smaller collections quickly and easily using the GROUP BY clause.
To learn more about clause, refer to the link below:
https://brainly.com/question/19711531
#SPJ1
Connect to a website and then open a Command Prompt window and run this command to discover the IP address of the website.
To find the IP address of a website, use Netstat to connect to it, then launch a command prompt window and enter this command.
What command enables you to view a network quickly?Ipconfig, arp -a, and ping are a few examples of commands that make debugging and scanning straightforward. The OS native commands located in the command line are the simplest approach to quickly retrieve a list of IP addresses and the devices they belong to that are connected to your network.
How can I find my private IP?To access the private IP address, run ipconfig in the command line prompt after searching for cmd in the Windows search bar. Mac. To access the private IP address, click on network and then system preferences.
To know more about command visit:-
https://brainly.com/question/3632568
#SPJ4
A single site visit usually gives true pictures, so it is unnecessary to visit more than one installation. True or False?
A single site visit usually gives true pictures, so it is unnecessary to visit more than one installation this statement is False.
Which of the following represents a typical illustration of a system need for the category of service?System need for the performance category typical example: Identify. Five hours following the conclusion of registration, the records management system must deliver class lists. Find a typical illustration of a system demand for the input segment.
Why do we need several domains?Utilizing numerous domains can assist you in ranking for a wider range of terms and phrases since your domain has a big impact on your keyword relevancy and rankings. A secondary domain can also be used to develop a completely distinct set of content themes.
To know more about domains visit
brainly.com/question/13153286
#SPJ4
challenge: loops - summing two arrays write a function mergingelements which adds each element in array1 to the corresponding element of array2 and returns the new array.
The merging elements program is an example of a function and an array.
What is the function merging elements?In C, an array is a method of grouping multiple entities of the same type into a larger group. The above entities or elements may be of int, float, char, or double data type or can include user-defined data types too like structures.Functions are code segments that are executed when they are called.The Java function for merging elements, where comments are used to explain each action, is as follows:
//The merging elements function is defined here.
public static int mergingelements[](int [] array1, int [] array2)
{
//declaring the new array
int newArr = new int[array1.length];
//The code below loops through the arrays.
for(int i=0; i<array1.length; i++ )
{
//This appends the corresponding elements from the two arrays to the new array.
newArr[i] = array1[i] + array2[i];
}
//This function returns the new array.
return newArr;
}
To learn more about java program refer to :
https://brainly.com/question/18554491
#SPJ4
Which expressions for YYY and ZZZ correctly output the indicated ranges? Assume int x's value will be 0 or greater. Choices are in the form YYY / ZZZ.if (YYY) {printf("0-29");}else if (ZZZ) {printf("30-39");}else {printf("40+");}a.x < 29 / x >= 29b.x < 30 / x >= 30c.x < 30 / x < 40d.x > 29 / x > 40Answer: c
The expression for YYY and ZZZ that correctly output the indicated ranges is:
c. x < 30 / x < 40
What is expression?An expression is a syntactic component of a programming language in computer science that can be valued through evaluation. It is a combination of one or more constants, variables, functions, and operators that the programming language deciphers (in accordance with its specific rules of precedence and of association) and computes to create ("to return," in a stateful environment), another value.
Evaluation is the term used to describe this action for mathematical expressions. In straightforward settings, the resulting value typically belongs to one of several primitive types, such as a numerical, string, boolean, complex data type, or other types. Statement, a syntactic entity with no value, is frequently contrasted with expression (an instruction).
Learn more about expressions
https://brainly.com/question/24661996
#SPJ4
as a network administrator, you are asked to recommend a secure method for transferring data between hosts on a network. which of the following protocols would you recommend? (select two.) answer rcp tdp ftp scp sftp
A secure technique of moving data between hosts on a network as a network administrator. The File Transmission Protocol, or FTP, is the now most widely used file transfer protocol on the internet.
What is FTP?
A password-protected FTP server is used to access or change files for a specific group of users. Afterward, the users can view the files shared through the FTP server website. As its name suggests, Secure File Transfer Protocol is used to transfer files safely over a network. The client and server are authenticated, and data is encrypted. There are three types of LAN data transmissions. broadcast, unicast, and multicast.
One packet is forwarded to one or more nodes in each form of communication.
To learn more about LAN from given link
brainly.com/question/13247301
#SPJ4
suppose that an adversary, eve, creates a public and private key and tricks bob into registering pke as a trusted certificate authority (that is, bob thinks eve is a trusted certificate authority). assume that alice is a web server and bob a client and they connect to one another using ssl/tls. show a man in the middle attack allowing eve to listen in on all communication between alice and bob even if alice and bob use ssl/tls and even if alice (the server) has a certificate from a real certificate authority (alice does not trust eve as a ca).
Note that in a man-in-the-middle (MITM) attack, Eve acts as an intermediary between Alice and Bob, allowing her to intercept and potentially modify their communication.
What is a Man in the Middle Attack?A man-in-the-middle (MITM) attack occurs when a perpetrator inserts himself into a dialogue between a user and an application, either to eavesdrop or to mimic one of the parties, giving the impression that a regular flow of information is taking place.
Here's how the attack could work:
Eve creates a public and private key and tricks Bob into registering PKE as a trusted certificate authority.Alice and Bob establish an SSL/TLS connection using certificates from a real certificate authority (CA).Eve intercepts the connection between Alice and Bob and establishes a separate SSL/TLS connection with each of them using her own certificate from PKE.Bob trusts PKE as a CA, so he accepts Eve's certificate as valid.Alice, however, does not trust PKE as a CA, so she may reject Eve's certificate. To bypass this, Eve can present Alice with a forged certificate from a real CA that Alice trusts.Once Alice accepts the forged certificate, Eve has successfully established separate SSL/TLS connections with both Alice and Bob.Eve can now intercept and potentially modify the communication between Alice and Bob, even though they are using SSL/TLS and have certificates from a real CA.It's important to note that SSL/TLS and certificates from a real CA can still provide a high level of security against MITM attacks, but it is important for clients to carefully verify the identity of the certificate issuer and to ensure that they are not accepting forged certificates.Learn more about MITM attack:
https://brainly.com/question/29851088?
#SPJ1
In the code2-1.css file create a style rule for the h1 element that sets the font-size property to 3.5em and sets the line-height property to 0em.
Please help!
Answer:
A style sheet is a set of one or more rules that apply to an HTML document. ... CSS1 has around 50 properties (for example color and font-size).
Explanation:
The program to create a style rule for the h1 element that sets the font-size property to 3.5em and sets the line-height property to 0em is in explanation part.
What is coding?We connect with computers through coding, often known as computer programming. Coding is similar to writing a set of instructions because it instructs a machine what to do.
To create a style rule for the h1 element in the code2-1.css file that sets the font-size property to 3.5em and the line-height property to 0em, you can use the following CSS code:
h1 {
font-size: 3.5em;
line-height: 0em;
}
This, this code will target all h1 elements in the HTML document and apply the specified font size and line height styles to them. Make sure to save the CSS file after making any changes.
For more details regarding programming, visit:
https://brainly.com/question/11023419
#SPJ2
Which of the following options should one choose to prompt Excel to calculate all open workbooks manually?
a. F9
b. F5
c. F10
d. F12
Option should be selected to instruct Excel to manually calculate all open workbooks is F9.
How can all open workbooks in Excel be manually calculated?All open workbooks' formulas will be calculated as follows: Click Calculate Now under the category Calculation on the Formulas (or Home)tab (or press F9). Every calculation in every open workbook in Excel is recalculated.
Do all open workbooks in Excel get calculated?When Excel is in manual calculation mode, it only recalculates open workbooks upon your request (by hitting F9 or Ctrl+Alt+F9) or when you save a worksheet. To prevent a lag when making changes, you must switch computation to manual mode for workbooks that take longer than a nanosecond to recalculate.
To know more about Excel visit :-
https://brainly.com/question/3441128
#SPJ4
How to isolate a single heartbeat in audio using the Librosa library?
We have collected various samples of heartbeat data with different cardiovascular diseases. Some examples of our dataset are uploaded here.
We would like to use Librosa to identify the starting/ending point of each heartbeat in the file. The goal, in the end, is to create a program that will take in a heartbeat file, and and output just one beat. What would be the best way to go about it?
Answer:
To isolate a single heartbeat in audio using the Librosa library, you can follow these steps:
Load the audio file into memory using the librosa.load() function. This function returns a tuple of the audio data as a NumPy array and the sample rate of the audio.
Use the librosa.onset.onset_detect() function to detect the onsets (i.e., the starting points) of the heartbeats in the audio data. This function returns a NumPy array of frame indices where onsets were detected.
Use the librosa.frames_to_samples() function to convert the frame indices to sample indices. This will give you the sample indices in the audio data where the heartbeats start.
Identify the sample indices where the heartbeats end by finding the difference between the starting indices of successive heartbeats. You can do this by subtracting the starting indices of the heartbeats from one another.
Use the NumPy slicing operator (i.e., []) to extract the samples corresponding to a single heartbeat from the audio data. For example, to extract the samples corresponding to the first heartbeat, you can use the following code:
To isolate a single heartbeat in audio using the Librosa library, you can follow these steps:
Load the audio file into memory using the load function. Use the onset detect function to detect the onsets (i.e., the starting points) of the heartbeats in the audio data. Use the frames to sample function to convert the frame indices to sample indices. Identify the sample indices where the heartbeats end by finding the difference between the starting indices of successive heartbeats. Use the slicing operator to extract the samples corresponding to a single heartbeat from the audio data.What is a heartbeat?A heartbeat is a two-part pumping action that lasts approximately one second.
The load function returns a tuple of the audio data as a array and the sample rate of the audio.
The onset detect function returns a array of frame indices where onsets were detected.
The frames to samples() function will give you the sample indices in the audio data where the heartbeats start. Then, you can identify the sample indices by subtracting the starting indices of the heartbeats from one another.
Therefore, the process of isolating a single heartbeat in audio using the Librosa library is described.
To learn more about heartbeat, click here:
https://brainly.com/question/13833121
#SPJ2
the static link in the current stack frame points to the activation record of a calling program unit
An unchanging or fixed URL for a Web page is contained in a hard-coded link known as a static link.
What is static link stack?The dynamic link directs the user to the caller's ARI's top. The static link navigates to the static parent of the callee's ARI at the bottom.
The address of the final activation record on the procedure's stack, where procedure p is declared, is contained in the static link of an activation record for procedure p. By following the chain of static links until we "discover" a declaration for x, we can always locate the address of a non-local variable named x.
Some computer languages generate and delete temporary variables using a memory management method called a stack frame. In other words, it can be viewed as a collection of all stack-related data for a subprogram call.
Therefore, the answer is the activation record of the static parent.
To learn more about stack frame refer to:
https://brainly.com/question/9978861
#SPJ4
Part A:
We want to create a class that represents a geometric sequence. A geometric sequence is a sequence of numbers that begin at some value and then multiplies each value by some constant to get the next value. For example, the geometric sequence 1, 2, 4, 8, 16 starts at 1 and multiplies each term by 2 to get the next. The geometric sequence 10.8, 5.4, 2.7, 1.35 starts at 10.8 and multiplies each term by 0.5 to get the next. The basic framework of a geometric sequence class is below:
public class GeometricSequence {
private double currentValue;
private double multiplier;
}Assume that the parameters to the constructor are initialand mult. What should the body of the constructor be?
double currentValue = initial;
double multiplier = mult;
initial = currentValue;
mult = multiplier;
double initial = currentValue;
double mult = multiplier;
currentValue = initial;
multiplier = mult;
________________________________________________________________________________________________________
Part B:
We want to create a class that represents a date. A date has a day, month, and year. For example, the date March 16, 2014 has the day 16, month 3, and year 2014. The parameter variables in the constructor for month, day, and year should be m, d and y. The basic framework of a date class is below:public class Date {
private int day;
private int month;
private int year;
}
What should the body of the constructor be?
day = 1;
month = 1;
year = 1990;
int day = d;
int month = m;
int year = y;
d = day;
m = month;
y = year;
day = d;
month = m;
year = y;
A public class in Java is an object blueprint that details the properties and methods of objects that fall under that class.
What is Public Class?An access modifier is a Java public keyword. It can be applied to classes, constructors, methods, and variables. It is the type of access modifier that is least constrained.Everywhere has access to the public access modifier. As a result, we have easy access to both the class and package's public.Any method that is being overridden must not be more restrictive than the original method, which must be stated in the subclass. Therefore, if you give a method or variable the public access modifier, only the public access modifier can be used to override it in a subclass.A programme may only designate one class as public if it has many classes.The name of the programme must be similar to the name of the public class if a class contains one.To learn more about Public Class refer to:
https://brainly.com/question/15130605
#SPJ4
True or False: Positions recorded on ground level are typically named with single digits while positions directly above them may be named with multiple digits.
Ones recorded at ground level are normally named with single digits, however stations directly beyond them may be titled with multiple digits, hence this statement is correct.
What do computer digits do?The members of the array "0, 1" compensate the digits there in binary numeral system. Computers employ this technique because the two numbers may stand in for the low and highest logic modes. In programming jargon, "binary digit" is condensed to "bit."
What are numbers and value?According on where it is located in the amount, each digit has a different value, which is referred to as value. We figure it out by dividing the digit's place any value by its face value. Place property plus face value is value.
To know more about Digits visit:
https://brainly.com/question/28214531
#SPJ4
A function can be defined in a Python shell, but it is more convenient to define it in an IDLE window, where it can be saved to a file.
Although it is possible to define a function in a Python shell, it is more practical to do it in an IDLE window where it may be saved to a file. The assertion that is made is accurate.
What is an idle window?
The typical Python programming environment is called IDLE. Its name is shortened to "Integrated Development Environment." Both Unix and Windows platforms support it well. You can access the Python interactive mode using the Python shell window that is present.
What makes Python and Python shell different from one another?An interpreter language is Python. It implies that the code is executed line by line. The Python Shell, a feature of the language, can be used to run a Python command and display the results.
To know more about python visit:
https://brainly.com/question/13437928
#SPJ4
returning a value means that whenever any other function calls this function (such as the dosubmit() function), its name is essentially replaced by the value it returns.
a. true
b. false
Note that It is TRUE to state that returning a value means that whenever any other function calls this function (such as the dosubmit() function), its name is essentially replaced by the value it returns.
What is a function call?When a function returns a value, it means that the function is essentially replaced by the value that it returns whenever it is called by another function. For example, if a function named "doSubmit()" calls a function named "getValue()" that returns a value of 5, then the doSubmit() function will effectively become the same as if it had been written as "return 5". This allows functions to return data or results to the calling function, which can be useful for a variety of purposes.
Learn more about Function Calls:
https://brainly.com/question/25762866?
#SPJ1
