The cars of a roller-coaster ride have a speed of 19.0 km/h as they pass over the top of the circular track. Neglect any friction and calculate their speed v when they reach the horizontal bottom position. At the top position, the radius of the circular path of their mass centers is 21 m, and all six cars have the same mass. What is v?

Answer:

Abolition of intermediaries (rent collectors under the pre-Independence land revenue system); Tenancy regulation (to improve the contractual terms including the security of tenure); A ceiling on landholdings (to redistributing surplus land to the landless);

Types of Land Reform

Abolition of Intermediaries

The first step taken by the Indian government under land reforms post-independence was passing the Zamindari Abolition Act. The primary reason of a backward agrarian economy was the presence of intermediate entities like, jagirdars and zamindar who primarily focussed on collecting sky-rocketing rents catering to their personal benefits, without paying attention to the disposition of farms and farmers. Abolition of such intermediaries not only improved conditions of farmers by establishing their direct connection with the government but also improved agricultural production.

Regulation of Rents

This was in direct response to the unimaginably high rents which were charged by intermediaries during British rule, which resulted in a never-ending cycle of poverty and misery for tenants. Indian government implemented these regulations to protect farmers and labourers from exploitation by placing a maximum limit on the rent that could be charged for land.

Tenure Security

Legislations were passed in all states of the country to grant tenants with permanent ownership of lands and protection from unlawful evictions on expiry of the lease. This law protects tenants from having to vacate a property immediately after their tenure is over unless ordered by law. Even in that case, ownership can be regained by tenants with the excuse of personal cultivation.

Answer:

a. Covalent modification = Seconds to minutes

b. Allosteric control = Milliseconds

c. Gene expression = Hours

Explanation:

Covalent modifications refer to the addition and/or removal of chemical groups by the action of particular enzymes such as methylases, acetylases, phosphorylases, phosphatases, etc. For example, histones are chromatin-associated proteins covalently modified by enzymes that add methyl groups (histone methylation), acetyl groups (histone acetylation), phosphate groups (histone phosphorylation), etc. Moreover, allosteric control, also known as allosteric regulation, is a type of regulation of the enzyme activity by binding an effector molecule (allosteric modulator) at a different site than the enzyme's active site, thereby triggering a conformational change on the enzyme upon binding of an effector. Finally, gene expression encompasses the cellular processes by which genetic information flows from genes to proteins (i.e., transcription >> translation). In metabolic pathways, enzymes that are able to catalyze irreversible reactions represent sites of control (for example, during glycolysis, pyruvate kinase is an enzyme that catalyzes an irreversible reaction, thereby serving as a control site). In turn, enzymatic activity is modulated by covalent modifications or reversible binding of allosteric effectors. Finally, metabolic pathways are also modulated by gene regulatory mechanisms that control the transcription of specific enzymes required for such pathways. During these processes, the times required for allosteric regulation, covalent modification (e.g., phosphorylation) and transcriptional control can be counted in milliseconds, seconds, and hours, respectively.

Answer:

80⁰C

Explanation:

80°C.

Normal flat plate collectors can deliver heat at temperatures up to 80°C. Deficiency rates for normal flat plate collectors can be classified as visual losses, which produce with cumulative angles of the incident sunshine, and thermal losses, which upsurge fast with the working temperature intensities

Answer:

The answer of these questions is

Explanation:

b) NO

Self induction and Mutual induction

If the current through the coil changes, the flux through the coil changes and an emf is induced. Since the emf is induced in the coil due to its own field, it is called self–induced emf and the phenomenon is called self–induction.

Answer:

Self induced EMF is the electro-motive force that is generated due to change in flux in the coil caused by the change in current in the same coil.

Answer:

2102.1 m

Explanation:

Temperature at the equator = 0⁰

Radius of the earth = 6.37x10⁶

Required:

We how to find out what the clearance between tape and ground would be if temperature increases to 30 degrees.

Final temperature = ∆T = 303-273 = 30

S = 11x10^-6

The clearance R = Ro*S*∆T

=6.37x10⁶x 11x10^-6x30

= 2102.1m

Or 2.102 kilometers

Thank you

Answer:

The moment of inertia is basically a physical quantity which describes how easy it is for a body to rotate itself around a given axis.

In easier wording: Moment of Inertia is a body and when it starts rotating or moving, it will keep doing so until we stop it by force.

Explanation:

For example, a car that is moving and active will continue to move even if you were to switch the engine off.

Answer:

p q output ¬(p ∧ q)

0 0 1

0 1 1

1 0 1

0 0 0

p q output ¬p ∨ ¬q

0 0 1

0 1 1

1 0 1

0 0 0

Explanation:

We'll create two separate truth tables for both sides of the equation, and see if they match.

The expressions in the question use AND, OR and NOT operators.

Let's start with ¬(p ∧ q)

Now let's move on to the second expression ¬p ∨ ¬q

Therefore we can say the two expressions are equivalent.

Attached  the truth table to verify the first De Morgan's law ¬(p ∧ q) ≡ ¬p ∨ ¬q:

As you can see from the attached truth table, the truth values for ¬(p ∧ q) and ¬p ∨ ¬q are the same for all combinations of p and q, confirming the validity of the first De Morgan's law.

De Morgan's law is a fundamental principle in propositional logic.

It states that the negation of a conjunction (AND) is equivalent to the disjunction (OR) of the negations of the individual propositions.

Learn more about truth table at:

https://brainly.com/question/28605215

#SPJ3

Answer:

[tex]D=0.41m[/tex]

Explanation:

From the question we are told that:

Discharge rate [tex]V_r=0.35 m3/s[/tex]

Distance [tex]d=4km[/tex]

Elevation of the pumping station [tex]h_p= 140 m[/tex]

Elevation of the Exit point [tex]h_e= 150 m[/tex]

Generally the Steady Flow Energy Equation SFEE is mathematically given by

[tex]h_p=h_e+h[/tex]

With

[tex]P_1-P_2[/tex]

And

[tex]V_1=V-2[/tex]

Therefore

[tex]h=140-150[/tex]

[tex]h=10[/tex]

Generally h is give as

[tex]h=\frac{0.5LV^2}{2gD}[/tex]

[tex]h=\frac{8Q^2fL}{\pi^2 gD^5}[/tex]

Therefore

[tex]10=\frac{8Q^2fL}{\pi^2 gD^5}[/tex]

[tex]D=^5\frac{8*(0.35)^2*0.003*4000}{3.142^2*9.81*10}[/tex]

[tex]D=0.41m[/tex]

Answer:

Voltage Regulator

Technician A is correct.

Explanation:

Technician B is not correct.  The voltage regulator is not installed between the output terminal of the alternator and the positive terminal of the battery as claimed by Technician B.  Technician A's opinion that the voltage regulator controls the strength of the rotor's magnetic field is correct.  The computer can also be used to control the output of the alternator by controlling the field current.

GIS

The full for GIS is : Geographic Information System.

The GIS is a system of mapping that is used to create, analyze, manage and map all the types of data.

It is a method capturing, checking as well as displaying all the data that is related to the position of the surface of earth.

Remote Sensing

Remote sensing is defined as a process where the various physical characteristics of an area are constantly monitored and detected by a process of measuring the reflection of the emitted radiations at ta distance.

The snow covered areas of the Kabul basin can be monitored and analyzed by using the process of GIS and remote sensing.

They provide a continuous source of information and data about snow covered peaks, the amount of snow to the authorities.

Learn More :

https://brainly.in/question/1556256?__cf_chl_captcha_tk__=pmd_2d2d9994422ca43d3cbbcf6322e6c34da175405a-1628654009-0-gqNtZGzNAvijcnBszQ3i

Answer:

- the Mach number is 0.24.

- Compressibility becomes effective when Mach number is greater than 0.3, the Mach number of the race cars is less than 0.3, hence, compressibility will not affect their aerodynamics.

Explanation:

Given the data in the question;

Average speed V = 185 miles per hour = ( 185 /2.237 ) m/s = 82.7 m/s

From Almanac, we can find that Indianapolis is at 220 m altitude.

So from table, at that altitude, the standard speed of sound will be 339.4 m/s .

Mach number of the race car will be;

Mach Number = Velocity / sound speed

we substitute

Mach Number = ( 82.7 m/s ) / ( 339.4 m/s )

Mach Number = 0.24

Therefore the Mach number is 0.24.

We know that, compressibility becomes effective when the Mach number is greater than 0.3.

Since the Mach number of the race cars is less than 0.3, compressibility will not affect their aerodynamics.

Answer:

Hello bro

Explanation:

I think i can help you something but can you translate it on english plzz

Answer:

Explanation:

The main function of the fins that are to be added is to ensure the speedy transfer of heat from the Hot air.

The fins should be attached outside the tube because the convection coefficient of air is higher inside the tube than the convection coefficient of the outside air ( atmospheric air ),  BUT

When convection coefficient of air inside the tube is equal to the atmospheric air outside the tube, it is recommended that the fins can be added on both sides of the tube ( i.e. in and outside the tube )

Answer:

New Zealand may use some of these solutions to prevent air pollution

Explanation:

Using public transports.

Recycle and Reuse

No to plastic bags

Reduction of forest fires and smoking

Use of fans instead of Air Conditioner

Use filters for chimneys

Avoid usage of crackers

to move or walk freely and easly

Explanation:

print() has a variable number of parameters. this is the answer.

hope this helps you

have a nice day

Answer:

what do you need help with

Explanation:

Answer:

Explanation:

% Clears variables and screen

clear; clc

% Asks user for input

n = input('Total number of objects: ');

r = input('Size of subgroup: ');

% Computes and displays permutation according to basic formulas

p = 1;

for i = n - r + 1 : n

   p = p*i;

end

str1 = [num2str(p) ' permutations'];

disp(str1)

% Computes and displays combinations according to basic formulas

str2 = [num2str(p/factorial(r)) ' combinations'];

disp(str2)

=================================================================================

Example: check

How many permutations and combinations can be made of the 15 alphabets, taking four at a time?

The answer is:

32760 permutations

1365 combinations

==================================================================================

Answer:

Following are the solution to the given question:

Explanation:

Line voltage:

[tex]V_L=\sqrt{3}V_{ph}=\sqrt{3}(120) \ v[/tex]

Power supplied to the load:

[tex]P_{L}=\sqrt{3}V_{L}I_{L} \cos \phi[/tex]

[tex]10\times 10^3=\sqrt{3}(120 \sqrt{3}) I_{L}\ (0.85)\\\\I_{L}= 32.68\ A[/tex]

Check wye-connection, for the phase current:

[tex]I_{ph}=I_L= 32.68\ A[/tex]

Therefore,

Phasor currents: [tex]32.68 \angle 0^{\circ} \ A \ ,\ 32.68 \angle 120^{\circ} \ A\ ,\ and\ 32.68 -\angle 120^{\circ} \ A[/tex]  

Magnitude of the per-phase load impedance:

[tex]Z_{ph}=\frac{V_{ph}}{I_{ph}}=\frac{120}{32.68}=3.672 \ \Omega[/tex]

Phase angle:

[tex]\phi = \cos^{-1} \ (0.85) =31.79^{\circ}[/tex]

Please find the phasor diagram in the attached file.

Answer:

d. all of the statements are correct.

Explanation:

WiMAX Broadband Wireless Access has the capacity to provide service up to 50 km for fixed stations. It has capacity of up to 15 km for mobile stations. WiMAX BWA describes both of 4G mobile WiMAX and fixed stations WiMAX. OFMD is used to increase spectral efficiency of WiMAX and to improve noise performance.

Answer:

c +5

Explanation:

we have difference in energy =

2.18x10⁻¹⁸ x z² / n²

now n = 1

amount of energy absorbed Δdelta = 7.84×10−17 J

7.84×10⁻¹⁷ = 2.18x10⁻¹⁸ x z²

we divide through by 2.18x10⁻¹⁸

z² = 7.84×10⁻¹⁷ / 2.18x10⁻¹⁸

z² = 35.9633

z = √35.9633

z = 5.9969

≈ 6

charge = atomic number 6 - number of electrons available in the element 1

= 6-1 = 5

from the calculations above, the charge of the one electron specie would be c +5

Answer:

Logging while drilling (LWD) is a technique of conveying well logging tools into the well borehole downhole as part of the bottom hole assembly (BHA). ... In these situations, the LWD measurement ensures that some measurement of the subsurface is captured in the event that wireline operations are not possible.

Explanation:

pls mark brainliest

Answer:

Explanation:

Using the kinematics equation [tex]v = v_o + a_ct[/tex] to determine the velocity of car B.

where;

[tex]v_o =[/tex] initial velocity

[tex]a_c[/tex] = constant deceleration

Assuming the constant deceleration is = -12 ft/s^2

Also, the kinematic equation that relates to the distance with the time is:

[tex]S = d + v_ot + \dfrac{1}{2}at^2[/tex]

Then:

[tex]v_B = 60-12t[/tex]

The distance traveled by car B in the given time (t) is expressed as:

[tex]S_B = d + 60 t - \dfrac{1}{2}(12t^2)[/tex]

For car A, the needed time (t) to come to rest is:

[tex]v_A = 60 - 18(t-0.75)[/tex]

Also, the distance traveled by car A in the given time (t) is expressed as:

[tex]S_A = 60 * 0.75 +60(t-0.75) -\dfrac{1}{2}*18*(t-0.750)^2[/tex]

Relating both velocities:

[tex]v_B = v_A[/tex]

[tex]60-12t = 60 - 18(t-0.75)[/tex]

[tex]60-12t =73.5 - 18t[/tex]

[tex]60- 73.5 = - 18t+ 12t[/tex]

[tex]-13.5 =-6t[/tex]

t = 2.25 s

At t = 2.25s, the required minimum distance can be estimated by equating both distances traveled by both cars

i.e.

[tex]S_B = S_A[/tex]

[tex]d + 60 t - \dfrac{1}{2}(12t^2) = 60 * 0.75 +60(t-0.75) -\dfrac{1}{2}*18*(t-0.750)^2[/tex]

[tex]d + 60 (2.25) - \dfrac{1}{2}(12*(2.25)^2) = 60 * 0.75 +60((2.25)-0.75) -\dfrac{1}{2}*18*((2.25)-0.750)^2[/tex]

d + 104.625 = 114.75

d = 114.75 - 104.625

d = 10.125 ft

Answer:

hey. its a big question. solved from *c hegg

Explanation:

Answer:

For fluid power, a working fluid is a gas or liquid that primarily transfers force, motion, or mechanical energy. ... Examples without phase change include air or hydrogen in hot air engines such as the Stirling engine, air or gases in gas-cycle heat pumps, etc.

Explanation:

Answer:

A working fluid is a gas or liquid that primarily transfers force, motion or mechanical energy

Examples:Air, pentane, chlorofluorocarbons, butane, propane and ammonia