The area of statistics known as inferential statistics uses statistics calculated from sample data to draw conclusions about unidentified population parameters.
What is the statistical field known as inferential statistics?To compare the treatment groups and draw conclusions about a larger population of people, inferential statistics use measures from the sample of experiment participants. There are numerous inferential statistics kinds, and each is suitable for a particular research strategy and set of sample characteristics.
What area of statistics focuses on the interpretation of data?Using inferential statistics allows statisticians to infer details about the characteristics of a population from those of a sample.
To know more about population parameters visit :-
https://brainly.com/question/29739146
#SPJ4
design a 32 bit counter that adds 4 at each clock edge the counter has reset and clock inputs upon reset the counter output is all 0
The counter is a digital sequencer, here a 4-bit counter. This simply means that you can count from 0 to 15 or vice versa depending on the counting direction (up/down).
The counter value (“count”) is evaluated on each positive (rising) edge of the clock cycle (“clk”).
If the "reset" input is logic high, the counter is set to zero.
If the "load" signal is logic high, the counter is loaded with the "data" input. Otherwise, count up or count down. If the "up_down" signal is logic high, the counter counts up, otherwise it counts down.
What are counters and their types
A counter is a sequential circuit. A well-known counter is a digital circuit used for counting pulses. Counters are the widest use of flip-flops. There are two types of counters. Asynchronous or ripple counter.
What are counters used for?
Counters are used not only to count, but also to measure frequency and time. increase memory address
To know more about counter visit;
https://brainly.com/question/29131973
#SPJ4
Which of the following activities is least likely to result in a segmentation fault?
Question 19 options:
Removing an element from the middle of a linked list without fixing the pointers afterwards
Growing the stack too large, such as with an unbounded recursive function
Trying to write into protected space, such as modifying the code segment of the program
Accessing a memory address outside its boundaries
From the following activities, the one that is least likely to result in a segmentation fault is: "Removing an element from the middle of a linked list without fixing the pointers afterwards" (Option A)
What is a segmentation fault?A segmentation fault or accessibility violation is a fault, or failure condition, reported by memory-protected hardware that alerts an operating system that software has attempted to access a restricted portion of memory. This is a type of generic protection fault on ordinary x86 machines.
Check whether your compiler or library can be made to check limits on I at least in debug mode, to remedy a segmentation error. Buffer overruns that write trash over excellent pointers can trigger segmentation faults. These actions will significantly minimize the chance of segmentation faults and other memory issues.
Learn more about Segmentation Fault:
https://brainly.com/question/15412053
#SPJ1
the policies, procedures, and awareness layer of the security model includes which of the following? (select two.)
The policies, practices, and understanding element of the security model is comprised of boarding and user education.
What makes security crucial?They keep discipline in huge gatherings and reduce the possibility of riots, mob fighting, or inebriated and disorderly behavior. Security can facilitate the organization and management of circumstances like big crowds at events, job terminations, or to foster a general atmosphere of safety and order in commercial facilities. A security, in its most basic form, is a store of wealth or instrument with value that may be purchased, sold, or exchanged.
Briefing:The Guidelines, Methods, and Consciousness layer also includes steps for employee onboarding and offboarding.
Computer cages, accelerometers, and environmental rules are all part of the physical layer.
To know more about Security visit:
https://brainly.com/question/17493537
#SPJ4
with my android phone synced to my crv, if using assistant drive mode, will the map play through cars screen
It depends on the specific make and model of your car and phone, as well as the settings and capabilities of the specific applications you are using.
Explanation in Detail:
In general, if you have an Android phone and you are using Assistant Drive mode, you may be able to use your car's display screen to view maps and navigation information. However, this will depend on whether your car's display screen is compatible with your phone and whether the navigation app you are using is compatible with your car's display screen.
For example, some newer models of cars have built-in Android Auto functionality, which allows you to use your car's display screen to access certain apps and features on your Android phone. If your car has this capability and you are using an Android Auto-compatible navigation app, you may be able to view maps and navigation information on your car's display screen.
Similarly, if you are using a navigation app that is compatible with Ap*ple CarPlay (such as Go*ogle Maps or Waze), you may be able to view maps and navigation information on your car's display screen if your car has Apple CarPlay functionality.
It is also worth noting that some cars have their own built-in navigation systems that can be used independently of your phone. In this case, you may not need to use your phone's navigation app at all.
To determine whether you can view maps and navigation information on your car's display screen, you will need to check the specific capabilities of your car and phone, as well as the settings and requirements of the navigation app you are using.
To know more about Android Auto, visit: https://brainly.com/question/29891282
#SPJ4
in this lab, your task is to discover whether arp poisoning is taking place as follows: use wireshark to capture packets on the enp2s0 interface for five seconds. analyze the wireshark packets to determine whether arp poisoning is taking place. use the 192.168.0.2 ip address to help make your determination. answer the questions.
Open Wireshark and choose enp2so from the Capture menu. To start the capture, select Blue fin. Choose the red box to stop after 5 seconds. Enter arp to display those packets in the Apply a display filter box. Look for lines in the Info column that contain the IP 192.168.0.2.
What is meant by which of the following when an attacker sends phony packets to link their MAC address?An attack known as ARP spoofing involves a malicious actor sending forged ARP (Address Resolution Protocol) packets across a local area network.
To find duplicate IP address traffic, which of the following wireshark filters is used?For Wireshark to only show duplicate IP information frames, use the arp. duplicate-address-frame filter.
To know more about Wireshark visit :-
https://brainly.com/question/13127538
#SPJ4
Rewards systems that reinforce the core values of the organization and contribute to organizational cohesiveness are the least effective type. T/F
False: The least successful form of rewards systems are those that promote organizational cohesion and reaffirm the essential values of the organization.
How does reinforcement work?
Reinforcement is a technique used in behavioral psychology to strengthen an individual's future behavior if that behavior is preceded by a certain form an important. This strengthening effect may be quantified as increased behavior (e.g., drawing a lever more frequently), increased length (example - pushing a lever for an prolonged period of time), increased magnitude (e.g., pulling a lever more firmly), or reduced latency (example - pulling a lever more quickly than following the antecedent stimulus). Self-awareness, self-reflection, and self-regulation are the three key principles of the soul paradigm of human nature. Historically, incentives have correlated with self-regulation.
To know more about reinforcement
https://brainly.com/question/5162646
#SPJ4
one drawback to the sequential search is that it cannot be used with an array that contains string elements. T/F
The sequential search has the limitation that it cannot be utilized with arrays containing string elements.Thus, it is false.
What sequential search, an array contains string elements?Searching linearly over an array of strings for the supplied string is an easy fix. Performing a modified binary search is a better solution.
Get the list of arrays. Get each element of the Array List object using the for-each loop. Make sure the array list's elements all contain the necessary string. Print the elements if applicable.
We compare the given string with the middle string, just like in a standard binary search. If the middle string is empty, we linearly search on both sides for the nearest non-empty string x.
Therefore, it is false that one drawback to the sequential search is that it cannot be used with an array that contains string elements.
Learn more about string here:
https://brainly.com/question/17330147
#SPJ1
Suppose that move is a member function of the class vehicleType. Which of the following statements declare move to be a pure virtual function.
(i) virtual void move(double a, double b) const = 0;
(ii) virtual void move(double a, double b) 0 = const;
A) Only (ii) B) Only (i) C) Both (i) and (ii) D) None of these.
Let's assume that move is a function of the vehicleType class. virtual void move(double a, double b) const = 0.
What accomplishes a class method?A class method is a method that is tied to the class itself, not to its objects. Because the class parameter refers to the class rather than the object instance, they have access to the class's state. It can alter a class state so that it would affect every instance of the class.
What are the features and functions of a class?It is used to describe and comprehend objects in more detail than just their label through the usage of feature, function, and class.
To know more about vehicleType visit :-
https://brainly.com/question/14567843
#SPJ4
___________ is when network managers deal with network breakdowns and immediate problems, instead of performing tasks according to a well laid out plan.
a. Panicking
b. Multiplexing
c. Multitasking
d. Firefighting
e. Fireflying
Instead of carrying out activities in accordance with a well-thought-out strategy, network administrators engage in "firefighting," where they address urgent issues and network outages.
What exactly does "network" mean?A number of computers connected together to share data (such printers and CDs), online cloud, or enable electronic conversations make up a network. A network's connections to its computers can be made through cables, phone lines, radio frequencies, spacecraft, or infrared laser beams.
Why is a network crucial?Simply simply, networking entails establishing relationships with other business people. Always consider the benefits to both sides when networking. A important good, higher exposure, a larger support network, enhanced company growth, and far more meaningful relationships are a few benefits of networking.
To know more about Network visit:
https://brainly.com/question/13102717
#SPJ4
To select adjacent worksheet tabs, click the first tab, press down and hold down this key, and then click the last tab.Shift
To select the adjacent worksheet tabs, click the first tab, press down and hold down the shift key and then click the last tab.
What is Microsoft Word?Microsoft Word is a word processor that may be used to create papers, letters, reports, and other types of writing of a professional calibre. It includes sophisticated capabilities that give you the best formatting and editing options for your files and projects.
What are examples of MS Word?Application software that enables you to create, edit, and save any documents is an example of Microsoft Word. It was first developed by software engineers Richard Brodie and Charles Simoyi in 1983 and is now owned by Microsoft.
To know more about word processors visit:
https://brainly.com/question/14103516
#SPJ4
In the optimistic approach, during the phase, a transaction scans the database, executes the needed computations, and makes the updates to a private copy of the database values.
a. read b. validation
c. write d. shared
The correct answer for this problem is a. read
Why does it uses read phase?
In the optimistic approach to concurrency control in database systems, during the read phase, a transaction scans the database and reads the values it needs in order to execute the necessary computations.
This is often referred to as the "read" phase.
If the values have been modified by another transaction, the current transaction may need to abort and retry the process from the beginning. This ensures that transactions are able to execute without conflicting with one another and helps to maintain the integrity of the database.
To Know More About database, Check Out
https://brainly.com/question/29774533
#SPJ4
A technician assist Joe, an employee in the sales department who needs access to the client database, by granting him administrator privileges. Later, Joe discovers he has access to the salaries in the payroll database.Which of the following security practices was violated?
The following security procedures were broken in accordance with the assertion made above on the principle of least privilege.
Giving an example, what is a database?A collection is a planned gathering of data. They enable the manipulation and storage of data electronically. Data administration is made simple by databases. Let's use a database as an example. A database is used to hold information on people, their mobile numbers, or other contact information in an online telephone directory.
What purposes serve databases?Any set of data or information that has been properly structured for quick searching and retrieval by a machine is referred to as a database, often known as an electronic database. Databases are designed to make it easy to save, retrieve, edit, and delete data while carrying out various data-processing tasks.
To know more about Database visit:
https://brainly.com/question/6447559
#SPJ4
One of the first computer aided design programs ever developed was also among the first to be integrated into ERP systems. This popular program isO Corel DrawO CADdieO AutoCADO MotoCAD
AutoCAD is one of the first computer-aided design programs that was also one of the first to be integrated into ERP systems.
What is AutoCAD?To put it simply, AutoCAD is a type of CAD software that focuses on drawing and modeling in 2D and 3D. It allows for the creation and modification of geometric models with nearly infinite potential for creating various structures and objects.Because of its versatility, AutoCAD has expanded beyond its traditional use in architecture and engineering to enter the worlds of graphic and interior design.It is a required key in AutoCAD that ensures the execution of a command and can change the function of other keys.The Area command in AutoCAD is a very useful command that can be used to calculate the area and perimeter of a closed region drawn with a polyline.To learn more about AutoCAD refer to :
https://brainly.com/question/25642085
#SPJ4
you have configured two routers (londona and londonb) for ospf routing. serial0/0 on londona is connected to serial0/1 on londonb. the partial configu
The supplied statement claims that the network statements' wildcard mask values are wrong.
What use does a router serve?One or more carton networks or subnetworks can be connected using a router. By sending data packets to thier intended IP addresses, it manages traffic between different networks and allows several devices to share an Internet connection.
Is purchasing my own router preferable?The most recent WiFi routers and isps make it simple to achieve the speeds that connection stability you want without struggling to accommodate every device. Long-term savings still apply even if you wind up updating your bought modem every 3 to 5 years.
To know more about Routers visit:
https://brainly.com/question/28180161
#SPJ4
The complete question is-
You have configured two routers, LondonA and LondonB for OSPF routing. Serial0/0 on LondonA is connected to Serial0/1 on LondonB. The partial configuration of each router is shown below:
hostname LondonA
!
interface Serial0/0
ip address 172.17.1.78 255.255.255.252
encapsulation frame-relay
!
interface Serial0/1
ip address 172.17.1.161 255.255.255.248
encapsulation frame-relay
!
router ospf 300
network 172.17.1.76 0.0.0.3 area 100
network 172.17.1.160 0.0.0.7 area 100
!--additional output omitted
hostname LondonB
!
interface Serial0/0
ip address 172.17.1.17 255.255.255.248
encapsulation frame-relay
!
interface Serial0/1
ip address 172.17.1.77 255.255.255.252
encapsulation frame-relay
!
router ospf 200
network 172.17.1.16 0.0.0.7 area 100
network 172.17.1.76 0.0.0.3 area 100
!--additional output omitted
A clique of size k is a subgraph that consists of k vertices that are all connected to each via an edge, i.e., all k(k−1)/2 edges exists. In class we proved that the problem of finding whether a graph contains a k -elique is NP-complete. Consider a similar problem: a k -clique with spikes consists of 2k vertices such that the first k elements form a clique and the rest k vertices are connected via an edge a different vertex of the clique. onsider a similar problem: Given a graph G and a number k find whether a k -clique with spikes exists. Show that the problem is NP-conplete.
A k-clique is a relaxed clique in social network analysis, i.e. a quasi-complete sub-graph.In a graph, a k-clique is a subgraph where the distance between any two vertices is less than k.
What exactly is a K-clique subgraph? A k-clique is a relaxed clique in social network analysis, i.e. a quasi-complete sub-graph.In a graph, a k-clique is a subgraph where the distance between any two vertices is less than k.A graph can readily display a limited number of vertices.A clique of size k in a graph G is a clique of graph G with k vertices, which means that the degree of each vertex in that clique is k-1.So, if there is a subset of k vertices in the graph G that are related to each other, we say that graph has a k-clique.A clique is a subgraph of a graph that has all of its vertices linked. The k-clique problem is concerned with determining the biggest complete subgraph of size k on a network, and it has numerous applications in Social Network Analysis (SNA), coding theory, geometry, and so on.To learn more about A clique refer
https://brainly.com/question/1474689
#SPJ4
drakee is in a meeting where enterprise systems on the cloud are being discussed, along with the advantages and disadvantages of leveraging cloud infrastructure. of the following, which is not true as it relates to cloud providers and enterprise systems? choose the best answer from the options that are available.
More storage, which is untrue in terms of corporate systems and cloud providers.
What is a trademark of Enterprise?Enterprise is now the major supplier of mobility solutions because to our extensive network. Along with automobile sales and car sharing, we also rent out trucks and cars. We have more than 8,000 sites globally, so we are always available. Due to a coronavirus epidemic and the chip scarcity, there is a strong demand for rental cars but a limited supply.
Is Hertz or Enterprise less expensive?We compared many quotes and, on the whole, discovered that Enterprise was more pricey than Hertz. Prices for prepaid and cash at pickup choices ranged from $70 to as much as $200.
To know more about Enterprise visit:
https://brainly.com/question/29645753
#SPJ4
The complete question is-
Drakee is in a meeting where enterprise systems on the cloud are being discussed, along with the advantages and disadvantages of leveraging cloud infrastructure. Of the following, which is not true as it relates to cloud providers and enterprise systems? Choose the best answer from the options that are available.
Group of answer choices
Increased storage
Automation of updates
Increased mobility
Flexibility with customization
Different approaches towards congestion control. Use the pulldown menu to match a congestion control approach to how the sender detects congestion- The sender infers segment loss from the absence of an ACK from A. end-end the receiver. B. network-assisted C. delay-based - Bits are set at a congested router in a sender-to-receiver datagram, and bits are in the returned to the sender in a receiver- to sender ACK, to indicate congestion to the sender. - The sender measures RTTs and uses the current RTT measurement to infer the level of congestion.
In order to make better use of a shared network infrastructure and prevent congestive collapse, a process called congestion management regulates the entry of data packets into the network. At the TCP layer, congestive-avoidance algorithms (CAA) are used as a preventative measure against network collapse.
How do TCP flow and congestion control differ from one another?The communication between a sender and a receiver is managed by flow control, an end-to-end technique. Data link layer and transport layer flow control are both present. A network employs congestion management to manage traffic on the network.
What issues does congestion cause?Individuals, organizations, and the economy as a whole are all impacted by congestion in terms of additional costs and time as well as stress.
To know more about congestion control visit :-
https://brainly.com/question/28945932
#SPJ4
when examining the permissions on a file in linux, how many bits are used to display this information
These permissions are represented by the characters "rwxrwxrwx," which are defined by nine bits in the i-node information. The world is described by the final three characters, the group by the middle three, and the user by the first three.
In Linux, how can I check a file's permissions?Make advantage of the ls tool and the -la arguments to see the permissions for all files in a directory. Add additional parameters as desired; see List the files in a directory in Unix for assistance. If an object is listed in the output sample above, the first character on each line specifies whether it is a file or a directory.
What are Linux's three permissions?The following permission types are employed: r - Read w - Write x - Execute.
To know more about linux visit :-
https://brainly.com/question/15122141
#SPJ1
Answer:When examining the permissions on a file in Linux, how many bits are used to display this information?
Explanation:These permissions are represented by the characters "rwxrwxrwx," which are defined by nine bits in the i-node information. The world is described by the final three characters, the group by the middle three, and the user by the first three.
In Linux, how can I check a file's permissions?
Make advantage of the ls tool and the -la arguments to see the permissions for all files in a directory. Add additional parameters as desired; see List the files in a directory in Unix for assistance. If an object is listed in the output sample above, the first character on each line specifies whether it is a file or a directory.
What are Linux's three permissions?
The following permission types are employed: r - Read w - Write x - Execute.
Which of the following applications would be a viable reason to use write-only memory in a computer?
Question 20 options:
Using a linked list that can remove elements from the head as well as the tail
Acquiring user input from the keyboard
Preparing geometric shapes for use on a graphics card
None of the above
Note that of the following applications the one that would be a viable reason to use write-only memory in a computer is: "None of the above" (Option D)
What is write-only memory?Write-only memory, the inverse of read-only memory, started as a joking allusion to a memory device that could be recorded to but not read, as there appeared to be no practical purpose for a memory circuit that could not be retrieved.
ROM stores the instructions required for communication among various hardware components. As previously stated, it is required for the storage and functioning of the BIOS, but it may also be used for basic data management, to store software for basic utility tasks, and to read and write to embedded systems.
Learn more about write-only memory:
https://brainly.com/question/15302096?
#SPJ1
Discuss which of the following systems allow module designers to enforce the need-to-know principle. a. The MULTICS ring-protection scheme b. Hydra’s capabilities c. JVM's stack-inspection scheme
Many contemporary systems have fewer rings than the original Multics system, which had eight.
What is meant by MULTICS ring-protection scheme?A layered supervisor may be present in each process's virtual memory thanks to the ring protection scheme. In Multics, ring O is where the lowest-level supervisor procedures, such as those that implement access control, I/O, memory multiplexing, and processor multiplexing, are executed.
Many contemporary systems have fewer rings than the original Multics system, which had eight. Through the use of a unique machine register, the hardware constantly remains aware of the current ring of the active instruction thread.
Your company is protected by three different rings, and in order to be successful, each ring must be addressed. Let's go over the three rings and how to fasten them.
Therefore, the correct answer is option a. The MULTICS ring-protection scheme.
To learn more about MULTICS ring-protection scheme refer to:
https://brainly.com/question/15020986
#SPJ4
what are two major concerns regarding iot devices? (select two.) answer short life span privacy accessibility hacking availability
The security of IoT devices and the security of the network are the two main issues. Serious data breaches may result from an unsecure IoT device. It's crucial to manage security for IoT connections and secure IoT devices.
What is an example of IoT devices?
A few examples of IoT goods are smart phones, smart refrigerators, smart watches, smart fire alarms, smart door locks, smart bicycles, medical sensors, fitness trackers, smart security systems, etc.
Give five examples of what the Internet of Things is.
The Internet of Things, or IoT, is the name given to the rapidly expanding network of interconnected items that can exchange data in real time thanks to integrated sensors. Appliances like refrigerators, vehicles, lights, and thermostats can all be connected to the Internet of Things.
To know more about IoT device visit;
https://brainly.com/question/29767231
#SPJ4
which of the following would be considered an input device? cpu cpu microsoft word microsoft word keyboard keyboard printer
A keyboard is regarded as an input device. Examples of input devices include scanners, mice, joysticks, and digital cameras.
Which of the following statements—that an output device provides information to the computer and an input device receives it—is true?A computer's output device transmits information to an input device, and the other way around. The computer provides information to an input device, which receives it, and the other way around. Both assertions are false.
What kind of hardware is used in computers?Computer hardware refers to the actual physical components of a computer, such as the chassis, CPU, RAM, monitor, mouse, keyboard, computer data storage, graphics card, sound card, and speakers.
To know more about input device visit :-
https://brainly.com/question/13014455
#SPJ4
Two .o files have been linked together with the command line ld -o p main.o weight_sum.o. Consider the following statements:
(i) There are no more undefined symbols.
(ii) The file must be dynamically linked
(iii) The file is a relocatable object file.
(iv) The file is an executable object file.
(v) There might be one undefined symbol.
(vi) The .bss section consumes no file space.
Which of these statements are correct?
Select one:
a. Only (i) and (iv) are correct (this is not correct)
b. Only (i), (iv) and (vi) are correct (updating on my own -- this is the correct answer)
c. Only (ii) is correct
d. Only (i) and (iii) are correct
e. Only (ii) and (v) are correct
f. None of the above is correct
Only (i), (iv) and (vi) are correct, since all files are given and are connected with executables.
What is executable files?An executable file is a file that can be used by a computer to carry out different tasks or operations. An executable file, in contrast to a data file, has been compiled and cannot be read. .BAT,.COM,.EXE, and.BIN are examples of common executable files on an IBM compatible computer.
The.DMG and.APP files can be executed on Apple Mac computers running macOS. Other executable files might also exist, depending on the operating system and its configuration.
You can run our download.exe file on your computer as an example test executable. Congratulations! You've successfully downloaded an executable programme file from the Computer Hope website, says the executable file that displays this message.
Learn more about executable files
https://brainly.com/question/28943328
#SPJ4
which of the following statements are true? local variables do not have default values. data fields have default values. a variable of a primitive type holds a value of the primitive type. all of the above
True local variables do not all have default values. Data fields come with default options. A primitive type's value is stored in a variable of that type.
Exist default values for data fields?Data fields come with default options. - No default values exist for local variables. A value of a primitive type is stored in a primitive type variable.
Which of the above techniques can be used to set up many variables with the same value at the beginning?By using = back-to-back, you can give many variables the same value. This is helpful, for instance, when setting numerous variables to the same value at the beginning. After assigning a value, it is also possible to assign a different value.
To know more about primitive type's visit :-
https://brainly.com/question/16996584
#SPJ4
Virtual memory layout [20] You have a 64-bit machine and you bought 8GB of physical memory. Pages are 256KB. For all calculations, you must show your work to receive full credit. (a) [1] How many virtual pages do you have per process? (b) [1] How many bits are needed for the Virtual Page Number (VPN)? (Hint: use part (a)) (c) [1] How many physical pages do you have? (d) [1] How many bits are needed for the Physical Page Number (PPN)? (Hint: use part (c)) (e) [1] How big in bytes does a page table entry (PTE) need to be to hold a single PPN plus a valid bit? (f) [1] How big would a flat page table be for a single process, assuming PTEs are the size computed in part (e)? (g) [10] Why does the answer above suggest that a "flat page table" isn't going to work for a 64-bit system like this? Research the concept of a multi-level page table, and briefly define it here. Why could such a data structure be much smaller than a flat page table? (h) [4] Does a TLB miss always lead to a page fault? Why or why not?
We have 2^48 pages per person. The number of physical pages is 2^16.. 48 bits of VPN are mapped to 16 bits of PPN. The PTE size is 2B. The page table size is 2^49 B.
What are the steps to calculate pages per person, physical pages, VPN ,PTE size and the table size?We know that;
Virtual Address = 64bits
Virtual Address Space = 2^Virtual Address = 2^64B
Physical Address Space = 4GB = 4 X 2^30 B = 2^32 B
Physical Address = log_2(Physical Address Space ) = log_2(2^32)
= 32 * log_2(2) = 32 bits.
Page size = 64KB =2^16 B
a) No of Virtual Pages = Virutal Address Space/PageSize
= 2^64B / 2^16 B = 2^48
b) NoOfPhysicalPages = PhysicalAddressSpace/PageSize
= 2^32 B / 2^16 B = 2^16
c) VPN (in Bits) = log_2(NoOfVirtual Pages) = log_2(2^48) = 48
PPN(inBits)=log_2(NoOfPhysicalPages)= log_2(2^16) = 16
Thus 48 bits of VPN are mapped to 16 bits of PPN.
d) PTE( Page Table Entry) holds the Physical Page Number of given Virtual Page along with many information about the page.
PTEsize = PPN(inBits) = 16 bits = 2B
e) Flat page table is single level page table. A page table contains the Physical Page number for a given page number. It helps in the translation of Vitual Address to Physical Address.
PageTableSize = NoOfVirtualPages*PTEsize = 2^{48}*2B = 2^49
To know moe about pages refer:
https://brainly.com/question/1362653
#SPJ4
match each ad fs authentication factor on the left with the appropriate description on the right. each authentication factor may be used once, more than once, or not at all.
1. A secret string of characters- password 2. A biometric authentication using fingerprint scanning, 3. A smart card, a tangible token 4. Multi-Factor Authentication - Authentication needs to be verified by many factors.
Describe biometrics.
Biometrics are measurements of the body and computations of human traits. In computer science, access control and identity is achieved by biometric security, also known as real authentication. It is also used to locate individuals in groups that are being monitored. The distinct, quantifiable traits that are used to identify and classify people are called biometric identifiers. Biological traits connected to a person's physical attributes, such as body form, are frequently characterized as biometric identifiers. Examples include fingerprinting, veins in the palms, face recognition, DNA, handprints, hand geometry, iris identification, retina, and odor/scent.
To know more about biometrics
https://brainly.com/question/20318111
#SPJ4
create a view called IBM_InvoiceData that will retrieve columns and rows from the Invoices table for the vendor named IBM.
in new plant designs, fieldbusses are progressively being replaced by ethernet, making cyber attacks against field equipment even easier. g
Device networks are being supplanted by Ethernet, despite being valued and recognized as reliable, tested, and deterministic. Ethernet will continue to descend into ever-simpler gadgets.
The Fieldbus Foundation also recognizes the benefits of using high-speed Ethernet in industrial applications, which is why Foundation HSE is built around this technology. Device, subsystem, and enterprise integration are the intended uses of Foundation HSE, which operates at 100 Mbit/s.
Real-time Ethernet: a potential fieldbus replacement?Real-time Ethernet-based fieldbuses have been built since the turn of the millennium. These might eventually take the place of conventional fieldbuses.
In industrial networking, what is fieldbus?Fieldbus. A series of real-time distributed control industrial computer network protocols known as Fieldbus is specified under IEC 61158.
To know more about Ethernet visit :-
https://brainly.com/question/14622272
#SPJ4
to assign a value to a global variable in a function, the global variable must be first declared in the function. T/F
False. Value can to assigned to a global variable in the function even if we dont declare it before.
How assigning the value of global variable is possible?Any variable that has to be used inside the function but is declared outside the function is referred to as a global variable. When you need to declare a global variable inside of a function, you use the word global. Normal variables only have a scope that extends to the function's conclusion when they are declared inside.
Utilize the global keyword when declaring the variable if you wish to use it outside of the function as well.
In JavaScript, there are two scopes: local and global. When a variable is assigned directly without being declared, it becomes a global property of the window object.
To know moe about global variables refer:
https://brainly.com/question/29607031
#SPJ4
with the workshop type summary query design view, group the records by workshop type, count the lastname field values, and run the query
the design view query The query results are shown in a datasheet by Access.
In Access, how can I sort a last name query?Click on the "Sort" row of the field in the QBE grid by which you want to order the results of a query in Access' query design view. Then choose "Ascending" or "Descending" order using the drop-down that appears.
How can you find a record in a database table by looking for particular information there?Click the field you wish to search in after opening the table or form. Click Find or press CTRL+F in the Find group on the Home tab. The Find tab is selected, and the Find and Replace dialog box displays.
To know more about query visit:-
https://brainly.com/question/29575174
#SPJ4
