Answer:
AM broadcasts occur on North American airwaves in the medium wave frequency range of 525 to 1705 kHz (known as the “standard broadcast band”). The band was expanded in the 1990s by adding nine channels from 1605 to 1705 kHz.
g A spherical container of inner diameter 0.9 meters contains nuclear waste that generates heat at the rate of 872 W/m3. Estimate the total rate of heat transfer from the container to its surroudings ignoring radiation.
Answer: The total rate of heat transfer from the container to its surroundings ignoring radiation is 332.67 W.
Explanation:
Given: Inner diameter = 0.9 m
q = 872 [tex]W/m^{3}[/tex]
Now, radii is calculated as follows.
[tex]r = \frac{diameter}{2}\\= \frac{0.9}{2}\\= 0.45 m[/tex]
Hence, the rate of heat transfer is as follows.
[tex]Q = q \times V[/tex]
where,
V = volume of sphere = [tex]\frac{4}{3} \pi r^{3}[/tex]
Substitute the values into above formula as follows.
[tex]Q = q \times \frac{4}{3} \pi r^{3}\\= 872 W/m^{3} \times \frac{4}{3} \times 3.14 \times (0.45 m)^{3}\\= 332.67 W[/tex]
Thus, we can conclude that the total rate of heat transfer from the container to its surroundings ignoring radiation is 332.67 W.
How do you find the product of gamma decay?
Answer:
The mass and atomic numbers don't change
Explanation:
An excited atom relaxes to the ground state emitting a photon...called a gamma ray.
The answer is that the mass and atomic numbers don't change.
In gamma decay, the product refers to the nucleus resulting from the emission of a gamma ray. Gamma decay occurs when an excited atomic nucleus releases excess energy in the form of a high-energy photon called a gamma ray.
To find the product of gamma decay, you need to identify the nucleus before and after the decay process. The product nucleus is determined by the parent nucleus that undergoes gamma decay.
During gamma decay, the number of protons and neutrons in the nucleus remains unchanged. Therefore, the identity of the element remains the same, but the energy state of the nucleus is altered.
The product nucleus is typically represented by the same chemical symbol as the parent nucleus, followed by a superscript indicating the mass number (total number of protons and neutrons) and a subscript indicating the atomic number (number of protons).
For example, if a parent nucleus with an atomic number of Z and a mass number of A undergoes gamma decay, the product nucleus will have the same atomic number Z and mass number A.
It's important to note that gamma decay does not involve the emission or absorption of any particles, only the release of electromagnetic radiation (gamma ray).
Thus, the product nucleus remains unchanged in terms of atomic number and mass number.
Know more about gamma decay:
https://brainly.com/question/16039775
#SPJ4
what is conservation energy?
Explanation:
Conservation of energy, principle of physics according to which the energy of interacting bodies or particles in a closed system remains constant
hope it is helpful to you
Two projectiles A and B are fired simultaneously from a level, horizontal surface. The projectiles are initially 62.2 m apart. Projectile A is
fired with a speed of 19.5 m/s at a launch angle 30° of while projectile B is fired with a speed of 19.5 m/s at a launch angle of 60°. How long
it takes one projectile to be directly above the other?
Let the point where A is launched act as the origin, so that the horizontal positions at time t of the respective projectiles are
• A : x = (19.5 m/s) cos(30°) t
• B : x = 62.2 m + (19.5 m/s) cos(60°) t
These positions are the same at the moment one projectile is directly above the other, which happens for time t such that
(19.5 m/s) cos(30°) t = 62.2 m + (19.5 m/s) cos(60°) t
Solve for t :
(19.5 m/s) (cos(30°) - cos(60°)) t = 62.2 m
t = (62.2 m) / ((19.5 m/s) (cos(30°) - cos(60°))
t ≈ 8.71 s
190 students sit in an auditorium listening to a physics lecture. Because they are thinking hard, each is using 125 W of metabolic power, slightly more than they would use at rest. An air conditioner with a COP of 5.0 is being used to keep the room at a constant temperature. What minimum electric power must be used to operate the air conditioner?
Answer:
W = 4.75 KW
Explanation:
First, we will calculate the heat to be removed:
Q = (No. of students)(Metabolic Power of Each Student)
Q = (190)(125 W)
Q = 23750 W = 23.75 KW
Now the formula of COP is:
[tex]COP = \frac{Q}{W}\\\\W = \frac{Q}{COP}\\\\W = \frac{23.75\ KW}{5}\\\\[/tex]
W = 4.75 KW
* A ball is projected horizontally from the top of
a building 19.6m high.
a, How long when the ball take to hit the ground?
b, If the line joining the point of projection to
the point where it hits the ground is 45
with the horizontal. What must be the
initial velocity of the ball?
c,with what vertical verocity does the ball strike
the grounds? (9= 9.8 M152)
Explanation:
Given
Ball is projected horizontally from a building of height [tex]h=19.6\ m[/tex]
time taken to reach ground is given by
[tex]\text{Cosidering vertical motion}\\\Rightarrow h=ut+0.5at^2\\\Rightarrow 19.6=0+0.5\times 9.8t^2\\\Rightarrow t^2=4\\\Rightarrow t=2\ s[/tex]
(b) Line joining the point of projection and the point where it hits the ground makes an angle of [tex]45^{\circ}[/tex]
From the figure, it can be written
[tex]\Rightarrow \tan 45^{\circ}=\dfrac{h}{x}\\\\\Rightarrow x=h\cdot 1\\\Rightarrow x=19.6[/tex]
Considering horizontal motion
[tex]\Rightarrow x=u_xt\\\Rightarrow 19.6=u_x\times 4\\\Rightarrow u_x=4.9\ m/s[/tex]
(c) The vertical velocity with which it strikes the ground is given by
[tex]\Rightarrow v^2-u_y^2=2as\\\Rightarrow v^2-0=2\times 9.8\times 19.6\\\Rightarrow v=\sqrt{384.16}\\\Rightarrow v=19.6\ m/s[/tex]
Thus, the ball strikes with a vertical velocity of [tex]19.6\ m/s[/tex]
Explanation:
Given
Ball is projected horizontally from a building of height
time taken to reach ground is given by
(b) Line joining the point of projection and the point where it hits the ground makes an angle of
From the figure, it can be written
Considering horizontal motion
(c) The vertical velocity with which it strikes the ground is given by
Thus, the ball strikes with a vertical velocity of
If 5kg Stone and 1kg stone throw the from the building which will land more fa ster and why?
Answer:
Both stones will land at the same time because both stones will fall with the same acceleration through the same height.
Explanation:
We are given that
Mass of stone ,m1=5 Kg
Mass of stone, m2=1 kg
We have to find which stone more faster will land and why.
[tex]h=u+\frac{1}{2}gt^2[/tex]
Initial velocity of both stones=0
[tex]h=\frac{1}{2}gt^2[/tex]
[tex]t^2=\frac{h}{g}[/tex]
[tex]t=\sqrt{\frac{h}{g}}[/tex]
[tex]t_1=t_2=\sqrt{\frac{h}{g}}[/tex]
Because both stones are thrown from the same height.
Both stones will land at the same time because both stones will fall with the same acceleration through the same height and the acceleration does not depend of its mass.
Three 15-Ω and two 25-Ω light bulbs and a 24 V battery are connected in a series circuit. What is the current that passes through each bulb?
1) 0.18 A
2) 0.25 A
3) 0.51 A
4) 0.74 A
5) The current will be 1.6 A in the 15-Ω bulbs and 0.96 A in the 25-Ω bulbs.
Answer:
I = 0.25 A
Explanation:
Given that,
Three 15 ohms and two 25 ohms light bulbs and a 24 V battery are connected in a series circuit.
In series combination, the equivalent resistance is given by :
[tex]R=R_1+R_2+R_3+....[/tex]
So,
[tex]R=15+15+15+25+25\\\\=95\ \Omega[/tex]
The current each resistor remains the same in series combination. It can be calculated using Ohm's law i.e.
V = IR
[tex]I=\dfrac{V}{R}\\\\I=\dfrac{24}{95}\\\\I=0.25\ A[/tex]
So, the current of 0.25 A passes through each bulb.
A frictionless piston-cylinder device contains 10 kg of superheated vapor at 550 kPa and 340oC. Steam is then cooled at constant pressure until 60 percent of it, by mass, condenses. Determine (a) the work (W) done during the process. (b) What-if Scenario: What would the work done be if steam were cooled at constant pressure until 80 percent of it, by mass, condenses
Answer:
a) the work (W) done during the process is -2043.25 kJ
b) the work (W) done during the process is -2418.96 kJ
Explanation:
Given the data in the question;
mass of water vapor m = 10 kg
initial pressure P₁ = 550 kPa
Initial temperature T₁ = 340 °C
steam cooled at constant pressure until 60 percent of it, by mass, condenses; x = 100% - 60% = 40% = 0.4
from superheated steam table
specific volume v₁ = 0.5092 m³/kg
so the properties of steam at p₂ = 550 kPa, and dryness fraction
x = 0.4
specific volume v₂ = v[tex]_f[/tex] + xv[tex]_{fg[/tex]
v₂ = 0.001097 + 0.4( 0.34261 - 0.001097 )
v₂ = 0.1377 m³/kg
Now, work done during the process;
W = mP₁( v₂ - v₁ )
W = 10 × 550( 0.1377 - 0.5092 )
W = 5500 × -0.3715
W = -2043.25 kJ
Therefore, the work (W) done during the process is -2043.25 kJ
( The negative, indicates work is done on the system )
b)
What would the work done be if steam were cooled at constant pressure until 80 percent of it, by mass, condenses
x₂ = 100% - 80% = 20% = 0.2
specific volume v₂ = v[tex]_f[/tex] + x₂v[tex]_{fg[/tex]
v₂ = 0.001097 + 0.2( 0.34261 - 0.001097 )
v₂ = 0.06939 m³/kg
Now, work done during the process will be;
W = mP₁( v₂ - v₁ )
W = 10 × 550( 0.06939 - 0.5092 )
W = 5500 × -0.43981
W = -2418.96 kJ
Therefore, the work (W) done during the process is -2418.96 kJ
A point charge of -3.0 x 10-C is placed at the origin of coordinates. Find the clectric field at the point 13. X= 5.0 m on the x-axis.
Answer:
-1.0778×10⁻¹⁰ N/C
Explanation:
Applying,
E = kq/r²................ equation 1
Where E = elctric field, q = charge, r = distance, k = coulomb's law
From the question,
Given: q = -3.0×10 C, r = 5.0 m
Constant: k = 8.98×10⁹ Nm²/C²
Substitute these values in equation 1
E = (-3.0×10)(8.98×10⁹)/5²
E = -1.0778×10⁻¹⁰ N/C
Hence the electric field on the x-axis is -1.0778×10⁻¹⁰ N/C
what is time taken by radio wave to go and return back from communication satellite to earth??
Answer:
Radio waves are used to carry satellite signals. These waves travel at 300,000 km/s (the speed of light). This means that a signal sent to a satellite 38,000 km away takes 0.13 s to reach the satellite and another 0.13 s for the return signal to be received back on Earth.
Explanation:
hope it help
A 9.0 V battery is connected across two resistors in series. If the resistors have resistances of and what is the voltage drop across the resistor?
Select one:
A. 4.6 V B. 9.4 V C. 8.6 V D. 4.4 V
Answer:
the answer to the question is known as D
state the story of archimedes
Answer:
Archimedes was born about 287 BCE in Syracuse on the island of Sicily. He died in that same city when the Romans captured it following a siege that ended in either 212 or 211 BCE. One story told about Archimedes' death is that he was killed by a Roman soldier after he refused to leave his mathematical work.
Displacement of a body moving in circular motion is
Explanation:
Displacement of a body moving in circular motion is called uniform circular motion.
hope it is helpful to you
Answer:
A constantly moving object with consistent circular movement. However, for its change in direction, it is accelerating
Explanation:
Uniform circular motion in a circle at constant rate can be described as the motion of the object. When an object moves in a circle, it changes its direction constantly. The object moves tangently to the circle at all times. As the velocity vector direction is the same as the object motion direction, the velocity vector is tangent to the circle. This is shown in the animation on the right by a vector arrow.
An item is accelerating that moves in a circle. Objects that accelerate are subjects that change their speed – either the velocity (i.e. the vecteur magnitude) or the direction. An object with consistent circular movement moves at a constant speed. However, because of its change in direction, it is accelerating. The acceleration direction is inside. The animation on the right shows this through a vector arrow
For an object with only a uniform circular movement, the final motion is the net force. The The net force acting on this object is directed to the middle of the circle. The net force is an inner or centripetal force. Without such a deepest force, an object would continue in a straight direction, never deviating. Regrettably, with the inward net force, perpendicular to the vector, the object changes the direction and is accelerated internally.
Choose the force diagram that best represents a ball thrown upward by Peter, at the
top of its path.
Diagram A
Diagram B
Diagram C
Diagram D
Answer:Diagram A
Explanation:
Since the air resistance is to be neglected, only the gravitational force acts on the ball ( and has acted all the way from the throw upward). Diagram A reflects this fact correctly indicating the gravity acting on the ball downward.
If it requires 8.0 J of work to stretch a particular spring by 2.0 cm from its equilibrium length, how much more work will be required to stretch it an additional 4.0 cm
Two guitar strings, of equal length and linear density, are tuned such that the second harmonic of the first string has the same frequency as the third harmonic of the second string. The tension of the first string is 510 N. Calculate the tension of the second string.
Answer:
The tension in the second string is 226.7 N.
Explanation:
Length is L, mass per unit length = m
T = 510 N
Let the tension in the second string is T'.
second harmonic of the first string = third harmonic of the second string
[tex]2 f = 3 f'\\\\2\sqrt{\frac{T}{m}} = 3 \sqrt {\frac{T'}{m}}\\\\4 T = 9 T'\\\\4\times 510 = 9 T'\\\\T' = 226.7 N[/tex]
What is the total number of moles of products involved in the following reaction?
CaCO3 (s) + 2HCl (aq) - CaCl2 (aq) + CO2 (g) + H20 (g)
O 6
2.
3
5
Answer:
3
Explanation:
You must first make sure the equation is balanced. This one is. Then, you simply add up the coefficients of each compound on the products side of the equation. When the coefficient is not specified, you can assume it is 1 mole. So, in this equation, there is 1 mole of CaCl₂, 1 mole of CO₂, and 1 mole of H₂O = 3 moles.
The reactant side of the equation also has three moles:
1 mole of CaCO₃ and 2 moles of HCl.
Based on the information in the table, what
is the acceleration of this object?
t(s) v(m/s)
0.0
9.0
1.0
4.0
2.0
-1.0
3.0
-6.0
A. -5.0 m/s2
B. -2.0 m/s2
C. 4.0 m/s2
D. 0.0 m/s2
Answer:
Option A. –5 m/s²
Explanation:
From the question given above, the following data were obtained:
Initial velocity (v₁) = 9 m/s
Initial time (t₁) = 0 s
Final velocity (v₂) = –6 m/s
Final time (t₂) = 3 s
Acceleration (a) =?
Next, we shall determine the change in the velocity and time. This can be obtained as follow:
For velocity:
Initial velocity (v₁) = 9 m/s
Final velocity (v₂) = –6 m/s
Change in velocity (Δv) =?
ΔV = v₂ – v₁
ΔV = –6 – 9
ΔV = –15 m/s
For time:
Initial time (t₁) = 0 s
Final time (t₂) = 3 s
Change in time (Δt) =?
Δt = t₂ – t₁
Δt = 3 – 0
Δt = 3 s
Finally, we shall determine the acceleration of the object. This can be obtained as follow:
Change in velocity (Δv) = –15 m/s
Change in time (Δt) = 3 s
Acceleration (a) =?
a = Δv / Δt
a = –15 / 3
a = –5 m/s²
Thus, the acceleration of the object is
–5 m/s².
1.a machine gun fires a ball with an initial velocity of 600m/s with an elevation of 30° with respect to the ground neglecting air resistance calculate:
a.the maximum height that can be reached?
b.the time of flight of the bullet?
c.the maximum horizontal displacement of the ired bullet?
Answer:
See explanation
Explanation:
a) maximum height of a projectile = u sin^2θ/2g
H= 600 × (sin 30)^2/2 × 10
H= 7.5 m
b) Time of flight
t= 2u sinθ/g
t= 2 × 600 sin 30/10
t= 60 seconds
Range
R= u^2sin2θ/g
R= (600)^2 × sin2(30)/10
R= 31.2 m
A body of mass 2kg is released from from a point 100m above the ground level. calculate kinetic energy 80m from the point of released.
Answer:
1568J
Explanation:
Since the problem states 80 m from the point of drop, the height relative to the ground will be 100-80=20m.
Use conservation of Energy
ΔUg+ΔKE=0
ΔUg= mgΔh=2*9.8*(20-100)=-1568J
ΔKE-1568J=0
ΔKE=1568J
since KEi= 0 since the object is at rest 100m up, the kinetic energy 20meters above the ground is 1568J
vector A has a magnitude of 8 unit make an angle of 45° with posetive x axis vector B also has the same magnitude of 8 unit along negative x axis find the magnitude of A+B?
Answer:
45 × 8 units = A + B as formular
A 165-km-long high-voltage transmission line 2.00 cm in diameter carries a steady current of 1,015 A. If the conductor is copper with a free charge density of 8.50 1028 electrons per cubic meter, how many years does it take one electron to travel the full length of the cable?
Answer:
22.1 years
Explanation:
Since the current in the wire is I = nevA where n = electron density = 8.50 × 10²⁸ electrons/cm³ × 10⁶ cm³/m³= 8.50 × 10³⁴ electrons/m³, e = electron charge = 1.602 × 10⁻¹⁹ C, v = drift velocity of electrons and A = cross-sectional area of wire = πd²/4 where d = diameter of wire = 2.00 cm = 2 × 10⁻² m
Making v subject of the formula, we have
v = I/neA
So, v = I/neπd²/4
v = 4I/neπd²
Since I = 1,015 A, substituting the values of the other variables into the equation, we have
v = 4I/neπd²
v = 4(1,015 A)/[8.50 × 10³⁴ electrons/m³ × 1.602 × 10⁻¹⁹ C × π ×(2 × 10⁻² m)²]
v = 4(1,015 A)/[8.50 × 10³⁴ electrons/m³ × 1.602 × 10⁻¹⁹ C × π × 4 × 10⁻⁴ m²]
v = (1,015 A)/[42.779 × 10¹¹ electronsC/m]
v = 23.73 × 10⁻¹¹ m/s
v = 2.373 × 10⁻¹⁰ m/s
Since distance d = speed, v × time, t
d = vt
So, the time it takes one electron to travel the full length of the cable is t = d/v
Since d = distance moved by free charge = length of transmission line = 165 km = 165 × 10³ m and v = drift velocity of charge = 2.373 × 10⁻¹⁰ m/s
t = 165 × 10³ m/2.373 × 10⁻¹⁰ m/s
t = 69.54 × 10⁷ s
t = 6.954 × 10⁸ s
Since we have 365 × 24 hr/day × 60 min/hr × 60 s/min = 31536000 s in a year = 3.1536 × 10⁷ s
So, 6.954 × 10⁸ s = 6.954 × 10⁸ s × 1yr/3.1536 × 10⁷ s = 2.21 × 10 yrs = 22.1 years
It will take one electron 22.1 years to travel the full length of the cable
15.1.2 Exam: Semester Exam
ŽA
This graph shows the energy of a reaction over time. Which statement is
true?
Potential energy
N
Reaction progress
O A. G represents the activation energy
OB. H represents the energy of the products,
O C. G represents the energy of the products.
< PREVIOUS
Answer: D. F represents the activation energy
Explanation:
The activation energy is the energy required to get the reactants to begin reacting with one another such that products are created. This energy ranges from the minimum to the maximum energy required.
F is therefore the activation energy because it shows the range between the minimum energy it took for the reaction to start and the maximum energy that was required to continue the reaction.
Click Stop Using the slider set the following: coeff of restitution to 1.00 A velocity (m/s) to 6.0 A mass (kg) to 6.0 B velocity (m/s) to 0.0 Calculate what range can the mass of B be to cause mass A to bounce off after the collision. Calculate what range can the mass of B be to cause mass A to continue forward after the collision. Check your calculations with the simulation. What are the ranges of B mass (kg)
Answer:
[tex]M_b=6kg[/tex]
Explanation:
From the question we are told that:
Coefficient of restitution [tex]\mu=1.00[/tex]
Mass A [tex]M_a=6kg[/tex]
Initial Velocity of A [tex]U_a=6m/s[/tex]
Initial Velocity of B [tex]U_b=0m/s[/tex]
Generally the equation for Coefficient of restitution is mathematically given by
[tex]\mu=\frac{V_b-V_a}{U_a-U_b}[/tex]
[tex]1=\frac{v_B}{6}[/tex]
[tex]V_b=6*1[/tex]
[tex]V_b=6m/s[/tex]
Generally the equation for conservation of linear momentum is mathematically given by
[tex]M_aU_a+M_bU_b=M_aV_a+M_bV_b[/tex]
[tex]6*6+=M_b*6[/tex]
[tex]M_b=6kg[/tex]
The thrust F of a screw propeller is known to depend upon the diameter d, Speed of advance v, fluid density e, revolution per second N, and the coefficient of viscosity M, of the fluid. Find the expression for F, in terms of the quantities
Answer:
[tex]{ \bf{F = { \tt{ \frac{4}{3} \pi {r}^{3}v gM}}}}[/tex]
A child with a weight of 230 N swings on a playground swing attached to 2.20-m-long chains. What is the gravitational potential energy of the child-Earth system relative to the child's lowest position at the following times?
(a) when the chains are horizontal (in J)
(b) when the chains make an angle of 33.0° with respect to the vertical (in J)
(c) when the child is at his lowest position (in J)
Answer:
a) U = 506 J, b) U = 37.11 J, c) U = 0
Explanation:
The gravitational power energy is given by the expression
U = m g (y -y₀)
In general, a reference system is set that allows the expression to be simplified, in this case let's assume the reference system at the child's lowest point, therefore y₀ = 0
Let's use trigonometry to find the child's height
h = y = L - L cos θ
we substitute
U = m g L (1 - cos θ)
a) when the chain is horizontal θ = 90 and cos 90 = 0
U = mg L
weight and mass are related
W = mg
m = W / g
U = 230 2.20
U = 506 J
b) θ = 33.0º
cos 33 = 0.83867
U = 230 (1 - 0.83867)
U = 37.11 J
c) in this case θ = 0 cos 0 = 1
U = 0
If an object of a constant mass experiences a constant net force, it will have a constant what?
Explanation:
hope it helps !!!!!!!!!!!!!
If an object of a constant mass experiences a constant net force, it will have a constant acceleration.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force. A spring balance can be used to calculate the Force. The Newton is the SI unit of force.
According to Newton's second law of motion:
Applied force = mass × acceleration.
Hence, if an object of a constant mass experiences a constant net force, it will have a constant acceleration.
Learn more about force here:
https://brainly.com/question/26115859
#SPJ6
What happens to the acceleration if you triple the force that you apply to the painting with your hand? (Use the values from the example given in the previous part of the lecture.) Submit All Answers Answer: Not yet correct, tries 1/5 3. A driver slams on the car brakes, and the car skids to a halt. Which of the free body diagrams below best matches the braking force on the car. (Note: The car is moving in the forward direction to the right.] (A) (B) (C) (D) No more tries. Hint: (Explanation) The answer is A. The car is moving to the right and slowing down, so the acceleration points to the left. The only significant force acting on the car is the braking force, so this must be pointing left because the net force always shares the same direction as the object's acceleration. 4. Suppose that the car comes to a stop from a speed of 40 mi/hr in 24 seconds. What was the car's acceleration rate (assuming it is constant). Answer: Submit Al Answers Last Answer: 55 N Only a number required, Computer reads units of N, tries 0/5. 5. What is the magnitude (or strength) of the braking force acting on the car? [The car's mass is 1200 kg.) Answer: Submit Al Answers Last Answer: 55N Not yet correct, tries 0/5
Answer:
2) when acceleration triples force triples, 3) a diagram with dynamic friction force in the opposite direction of movement of the car
4) a = 2.44 ft / s², 5) fr = 894.3 N
Explanation:
In this exercise you are asked to answer some short questions
2) Newton's second law is
F = m a
when acceleration triples force triples
3) Unfortunately, the diagrams are not shown, but the correct one is one where the axis of movement has a friction force in the opposite direction of movement, as well as indicating that the car slips, the friction coefficient of dynamic.
The correct answer is: a diagram with dynamic friction force in the opposite direction of movement of the car
4) let's use the scientific expressions
v = v₀ - a t
as the car stops v = 0
a = v₀ / t
let's reduce the magnitudes
v₀ = 40 mile / h ([tex]\frac{5280 ft}{1 mile}[/tex]) ([tex]\frac{1 h}{3600 s}[/tex]) = 58.667 ft / s
a = 58.667 / 24
a = 2.44 ft / s²
5) let's use Newton's second law
fr = m a
We must be careful not to mix the units, we will reduce the acceleration to the system Yes
a = 2.44 ft / s² (1 m / 3.28 ft) = 0.745 m / s²
fr = 1200 0.745
fr = 894.3 N
Một mặt phẳng vô hạn tích điện đều, mật độ σ = 4.10-9 C/cm2 , đặt thẳng đứng trong không khí. Một quả cầu nhỏ có khối lượng 8 g, mang điện tích q = 10-8 C treo gần vào mặt phẳng, sao cho dây treo lúc đầu song song với mặt phẳng. Lấy g = 9,8m/s2 . Khi cân bằng, dây treo quả cầu hợp với mặt phẳng 1 góc bằng bao nhiêu?
Answer:
The angle is 16 degree.
Explanation:
A uniformly charged infinite plane, density σ = 4.10-9 C/cm2, is placed vertically in air. A small ball of mass 8 g, with charge q = 10-8 C, hangs close to the plane, so that the string is initially parallel to the plane. Take g = 9.8m/s2 . In equilibrium, by what angle does the string hanging from the ball make an angle with the plane?
Surface charge density, σ = 4 x 10^-5 C/m^2
charge, q = 10^-8 C
mass, m = 0.008 kg
The electric field due to the plate is
[tex]E= \frac{\sigma }{2\varepsilon 0}[/tex]
Let the angle make with the vertical is A and T is the tension in the string.
[tex]T sin A = q E....(1)\\\\T cos A = m g .... (2)\\\\Divie (1) by (2)\\\\tan A =\frac{q E}{m g}\\\\tan A = \frac{10^{-8}\times 4\times 10^{-5}}{2\times 8.85\times 10^{-12}\times 0.008\times9.8}\\\\tan A = 0.288\\\\A = 16 degree\\[/tex]
