Answer:
D. the solvent particles to be spread further out and have more to move, increasing their kinetic energy.
Explanation:
The addition of solute particles results in an increased boiling point. As the solutes increases so does the energy inside as the solutes add and occupies more space near the surface of the liquid.Calculate the molar mass of the following compound: Ca3P2
Answer:
The molar mass of the compound given is 182.182 g/mol.
Explanation:
To calculate the molar mass of the compound, we must multiply the number of moles of each element by the the individual molar mass of each element and add them together.
Let's start with Calcium. The molar mass of Calcium is 40.078. In this compound, we have three moles of Calcium, so we should multiply this number by 3.
40.078 g/mol * 3 mol = 120.234 g
Now, let's do the same for Phosphorus.
30.974 g/mol * 2 g/mol = 61.948 g
To find the molar mass of the entire compound, we should add these two values together.
120.234 g + 61.948 g = 182.182 g
Therefore, the correct answer is 182.182 g/mol.
Hope this helps!
The volume of a gas at 6.0 atm is 2.5 L. What is the volume of the gas at 75 atm at
the same temperature? (5 points)
1) 1.0 L
0 2 2) 1.5 L
3) 2.0 L
O 4) 3.0L
The volume of a gas at 6.0 atm is 2.5 L. What is the volume of the gas at 7.5 atm at
the same temperature? (5 points)
1) 1.0 L
2) 1.5 L
3) 2.0 L
4) 3.0L
Answer:
2.0 L
Option C) 2.0L is the correct answer.
Hence, at the same temperature, as the pressure is increased to the given value, the volume of the gas decreases to 2.0L.
Boyle's law
Boyle's law states that "the volume V of a given quantity of gas is inversely proportional to its pressure P as long as temperature remains constant.
Boyle's law is expressed as;
P₁V₁ = P₂V₂
Given the data in the question;
Initial Volume V₁ = 2.5LInitial pressure P₁ = 6.0atmFinal pressure P₂ = 7.5atmFinal volume V₂ = ?To determine the final volume of the gas, we substitute our given values into the expression above.
P₁V₁ = P₂V₂
V₂ = P₁V₁ / P₂
V₂ = ( 6.0atm × 2.5L ) / 7.5atm
V₂ = 15Latm / 7.5atm
V₂ = 2.0L
Option C) 2.0L is the correct answer.
Hence, at the same temperature, as the pressure is increased to the given value, the volume of the gas decreases to 2.0L.
Learn more about Boyle's law here: brainly.com/question/1437490
High-pressure liquid chromatography (HPLC) is a method used in chemistry and biochemistry to
purify chemical substances. The pressures used in this procedure range from around 500
kilopascals (500,000 Pa) to about 60,000 kPa (60,000,000 Pa). It is often convenient to know
the pressure in torr. If an HPLC procedure is running at a pressure of 3.20x10^8 Pa , what is its
running pressure in torr?
Express the pressure numerically in torr.
►
3.20 x 10^8 Pa = _____ torr
Answer:
2,400,000 torr (3 s.f.)
Explanation:
Convert the pressure from Pascal to atm first:
[tex]\boxed{1 \: atm = 101325 \:Pa }[/tex]
3.20 ×10⁸ Pa
= [(3.20 ×10⁸) ÷101325] atm
= 3158.2 atm (5 s.f.)
Convert atm to torr:
[tex]\boxed{1 \: atm = 760 \: torr}[/tex]
3158.2 atm
= (3158.2 ×760) torr
= 2400000 torr (3 s.f.)
Element X and Y are two different elements that are placed in the same group in the Periodic Table of Elements. Which of the following statements is correct about their atoms?
A Atoms of element X and Y have same number of electrons
B Atoms of element X and Y have different number of protons
C Number of neutrons for atom X and Y changes during formation of an ion
D Nucleon number for atom X and Y is the total number of protons and electrons
Answer:
A Atoms of element X and Y have same number of electrons
How does a cirrus cloud look like
1) cotton
2) thin feather
Answer:
2) thin feather
Explanation:
Cirrus clouds are delicate, feathery clouds that are made mostly of ice crystals. Their wispy shape comes from wind currents which twist and spread the ice crystals into strands.
hope it helps :)
please mark brainliest!!!
How much of a sample remains after five half-lives have occurred?
1/5 of the original sample
1/25 of the original sample
1/32 of the original gample
1/64 of the original sample
Answer:
1/32
Explanation:
Plz Help I have One more time To retake and I can't fail it..
Answer:
B. Radar uses radio and the siren uses sound waves. both exhibit in the Doppler effect.
sorry if this is wrong
How many liters of carbon dioxide can be “scrubbed”, or removed, with 3.45 Liters of 0.10 M of lithium hydroxide solution?
Answer:
The correct answer is - 3.864 L of CO2.
Explanation:
Fe2O3 +3CO--2Fe+3CO2 .identify the substance oxidized ,reduced and oxidizing agent and reducing agent
Answer:
Oxidized : CO
Reduced: Fe
Oxidizing agent: Fe2O3
Reducing agent: CO
Explanation:
Loss of electrons is oxidation while gaining of electrons is reduction.
CO is a reducing agent, Fe2O3 is an oxidizing agent.
Each carbon atom is oxidized in CO. CO is the reducing agent
Each Fe atom in FeO3 is reduced. FeO3 is the oxidizing agent
Re-word this statement: Ionic Radii are changing as you move down the column because the atoms in lower rows have more energy levels, which makes the valence electrons farther from the nucleus, so it takes less energy for them to be pulled away.
The Ionic radii are changing as you move across a row because each element has one more proton, which increases the attraction of the nucleus.
Answer:
ty po hehe
Explanation:
mark me as brainliest po thank you
What happens to a glass of sugar solution when sugar is added to it?
The number of moles of water increases.
The number of moles of water decreases.
The molarity of the solution increases.
The molarity of the solution decreases.
When sugar is added to a glass of sugar solution, the molarity of the solution increases. Details about molarity can be found below, which is the third option.
What is molarity?Molarity is a term used to identify the amount of solute, in moles, dissolved in a solvent by volume. Molarity is expressed as moles per liter (mol/L).
However, molarity is directly proportional to the amount of solute in solution. This means that as the amount of solute increases, molarity also increases.
Therefore, when sugar is added to a glass of sugar solution, the molarity of the solution increases.
Learn more about molarity at: https://brainly.com/question/2817451
#SPJ1
its not a question but i wanted to tell you guys that if you guyz like my answers then please don't forget to give like and follow at the same time. I am not forcing you to follow only if you guyz like my answer then like or follow. THANKS FOR READING..
Answer:
thank you for this oibnki
Answer:
Sure I'll go ahead and like your answers and follow you if that's what you wanted! :)
Explanation:
. De las siguientes soluciones:
1. 20 ml de alcohol etílico mezcladas con 80 ml de agua.
2. 500 ml de agua con 20 g de sal disueltas (V Sln: 500ml).
3. 80 g de sal en 2 litros de agua.
a) Identifica el soluto y solvente de cada solución y explica ¿por qué?
b) Encuentra la concentración por peso de la solución número 3 c) Entre la disolución 2 y 3 ¿Cuál presenta mayor concentración?
por favor lo necesito para hoy ¡gracias!
Answer:
can u translate this to English? I might be able to help
a) Solution 1: Solute is ethyl alcohol, solvent is water. Solution 2 and 3: Solute is salt, solvent is water.
b) Concentration by weight of solution 3: Approximately 3.85%.
c) Solution 3 has a higher concentration than solution 2.
a) Solutions and their solutes and solvents:
Solution 1: The solute is ethyl alcohol, and the solvent is water. This is because ethyl alcohol is the substance that dissolves in water to form the solution.
Solution 2: The solute is salt, and the solvent is water. Salt is the substance that dissolves in water to form the solution.
Solution 3: The solute is salt, and the solvent is water. Similar to solution 2, salt is the substance that dissolves in water to form the solution.
b) Weight concentration of solution number 3:
The weight concentration is calculated by dividing the mass of the solute (80 g of salt) by the total mass of the solution (80 g of salt + 2000 g of water):
Weight concentration = (80 g / 2080 g) * 100% ≈ 3.85%
c) Comparison of concentrations between solution 2 and 3:
Solution number 3 has a higher concentration than solution 2, as the weight concentration of solution 3 is approximately 3.85%, while the exact amount of water is not provided for solution 2 to calculate its concentration. However, solution 2 contains only 20 g of salt dissolved in 500 ml of water, which implies that the concentration will be lower than solution 3. Therefore, solution number 3 has a higher concentration compared to solution 2.
To learn more about Solutions, here
https://brainly.com/question/30665317
#SPJ2
I. En un laboratorio se hizo reaccionar una disolución de ácido sulfúrico (H2SO4) con otra de hidróxido de sodio (NaOH), ambos acuosos. Para formar sulfato de sodio (Na2SO4) y 2 moléculas de agua (H2O) líquido. Completa en relación con la ecuación química que representa la reacción:
Answer:
In a laboratory, a solution of sulfuric acid (H2SO4) was reacted with another of sodium hydroxide (NaOH), both aqueous. To form sodium sulfate (Na2SO4) and 2 molecules of liquid water (H2O). Complete in relation to the chemical equation that represents the reaction:
Explanation:
The balanced chemical equation of the reaction is:
[tex]H_2SO_4(aq)+2NaOH(aq)-> Na_2SO_4(aq)+2H_2O(l)[/tex]
Thus, one mole of sulfuric acid reacts with two moles of sodium hydroxide.
Which molecule will have the strongest LDF
Answer: Try to get answer in Explanation
Explanation: Kr has a greater number of polarizable electrons (36 electrons), so Kr would have a greater degree of LDFs and therefore a greater melting point than N 2 (which has 7 × 2 = 14 polarizable electrons).
Which of the following is not a pure form of a substance ?
A.Element
B.Atom
C.Molecule
D.Mixture
E.Compound
Answer:
Which of the following is not a pure form of a substance ?
C.mixture
Explanation:
since mixture is created due to one or more than two element,compound,molecule or atom.
Answer:
option D . mixture.
Explanation:
Mixture is not a pure form of a substance .
it is formed when two particles mixed together in one substance
Hope it is helpful to you ❣️✌️☺️☪️❣️
what is a measureing tape used for
Answer:
It is used to measure size or distance.
Answer:
it is used to measure long heights and distances and lengths,it is yellow and goes round
Explanation:
A mixture of reactants and products for the reaction shown below is at equilibrium in a 5.0 L container what would most likely happen to the equilibrium if the volume of the container will reduced to 3.0 L?
Since the volume decreased, it means that the pressure is going to rise. Thus, the equilibrium of the reaction will shift in the direction that has the least amount of moles.
The statement, that describes the equilibrium "will change in the direction with the minimum moles."
What is an equilibrium?A condition of equilibrium has become one of balance. Chemical equilibrium is the state in which both the reactants and products are present in concentrations that have no further tendency to change with time, resulting in no observable change in the system's properties.
When volume decreases, the equilibrium shifts to favor the direction that produces fewer moles of gas. When the volume is raised, the equilibrium shifts in favor of the direction that produces the most moles of gas. Because the container's volume will be lowered from 5.0 L to 3.0 L, the pressure will rise. As a result, the equilibrium of the reaction will shift in the direction with the fewest moles. When the volume is reduced, the pressure rises. This demonstrates that a gas's pressure is inversely proportional to its volume.
Hence the correct answer is equilibrium will change in the direction with the minimum moles.
Learn more about equilibrium here
https://brainly.com/question/13463225
#SPJ2
what is the organic molecule
Answer:
kinetic energy is the molecules
Explanation:
A molecule of the kind normally found in living systems. Organic molecules are usually composed of carbon atoms in rings or long chains, to which are attached other atoms of such elements as hydrogen, oxygen, and nitrogen.
what do you mean by 1 joule work
Answer:
Joule is the SI unit of work. 1 Joule is amount of work done when a force of 1 Newton displaces a body through a distance of 1m in the direction of the force applied.
which of the following is a physical change? 1.burning paper 2.grinding wheat 3.electrolysis of water 4.cooking rice
Answer:
2 grinding of wheat is just a physical change
plz brainlist
Describe weighted average
Answer:
Explained below
Explanation:
In simple average, we just add all the given data variables and divide it by the number of data given.
However, when it comes to weighted average, what we do is that we multiply each given variable by their weights and then divide the sum of that by the sum of the weights.
Thus, if the variables are denoted by x and their weights are denoted by y, then we have;
Weighted average = Σ(xy)/Σy
What must scientists look for in their experiment or their data to make sure it is accurate?
Answer:
Scientists must look in their experiment/data to check for accuracy because they don't want to make any mistakes, and most importantly have to make sure they have the right information to proceed.
Explanation:
^
please help with the attached picture question 21, 22, 23
Explanation:
21. The given molecule for cracking is tetradecane.
On cracking it forms one mole of decane (C10H22) and two moles of ethene gas.
The chemical equation is shown below:
[tex]C_1_4H_3_0->C_1_0H_2_2+2C_2H_4[/tex]
22. The essential condition for the formation of an ester is the reaction of alcohol and acid in presence of concentrated sulfuric acid.
Thus among the given options, the first option is the correct one.
23. Isomers of butanol are shown below:
It is 2-butanol.
The position of -OH group changes to the second carbon.
What is the boiling point of water?
Answer:
212°F , 100°C , 373.15°K
They are all the same, in different units.
Answer:
The boiling point of water is 212 degrees fahrenheit, and/or 100 degrees celsius.
Please help me with my work
Answer:
2
Explanation:
There's 2 Hydrogen and Chlorine molecules on the right side with one Zinc. So the left side needs to have a coefficient of 2 on the hydrochloric acid, or HCl.
mention two factors which affect pressure due to liquid contained in a vessel
Answer:
depth of the liquid and nature of liquid affects the pressure due to liquid contained in a vessel
Answer:
Two factors influence the pressure of fluids. They are the depth of the fluid and its density. A fluid exerts more pressure at greater depths
Suppose that three isotopes of element X occur in nature as follows:
The relative atomic mass of the naturally occurring mixture of element X is
Answer:
107.5 amu
Explanation:
isotopes: fractional Wt Avg
isotopes: isotopic mass %Abundance abundance (amu)
X110 110 60 0.60 66.0
X105 105 30 0.30 31.5
X100 100 10 0.10 10.0
∑ atm mass contributions = 107.5 amu*
*amu = atomic mass units
When it’s summer in the northern hemisphere what Season is it in the Southern Hemisphere
Answer:
Winter
Explanation:
I dont know but whatev
Answer:
Winter
Explanation:
The seasonal cycle in the polar and temperate zones of one hemisphere is opposite to that of the other. Therefore, When it is summer in the Northern Hemisphere, it is winter in the Southern, and vice versa.
hope it helps :)
Select the structure corresponding to trans-3-octene.
Answer: B
Explanation:
Answer:
The Correct Answer Is B.
