Answer:
b. 0.64
Explanation:
The computation of the inventory turnover for the year 2016 is shown below:
Inventory turnover = Cost of goods sold ÷ Average inventories
where,
Average inventories is
= ($11,970,656 + $10,632,462) ÷ 2
= $11,301,559
And the cost of goods sold is $7,204,884
So, the Inventory turnover is
= $7,204,884 ÷ $11,301,559
= 0.64 times
We simply applied the above formula
At the start of the current year, SBC Corp. purchased 25% of Sky Tech Inc. for $47 million. At the time of purchase, the carrying value of Sky Tech's net assets was $80 million. The fair value of Sky Tech's depreciable assets was $12 million in excess of their book value. For this year, Sky Tech reported a net income of $80 million and declared and paid $12 million in dividends. The total amount of additional depreciation to be recognized by SBC over the remaining life of the assets is:
Answer:
$3
Explanation:
SBC Corp
($million)
FV in excess of book value $12
×
Share of ownership 25%
Additional depreciation in total $3
Therefore the total amount of additional depreciation to be recognized by SBC over the remaining life of the assets is: $3
For the cost and price functions below, find
a. the number, q, of units that produces maximum profit
b. the price, p, per unit that produces maximum profit
c. the maximum profit, P.
C(q) = 70 + 17q
p = 77 - 2q
Answer:
a) The number, q, of units that produces maximum profit = 15
b) The price, p, per unit that produces maximum profit = 47 (currency not giben in the question)
c) Maximum Profit = P = 380 (currency not given in the question).
Explanation:
The cost function and price per unit function are given respectively as
C(q) = 70 + 17q
p = 77 - 2q
where q = quantity or number of units
a.) the number, q, of units that produces maximum profit
Total cost = C(q) = 70 + 17q
Revenue = (price per unit) × (Number of units) = p × q = (77 - 2q) × q = (77q - 2q²)
Profits = P(q) = (Revenue) - (Total Cost)
P(q) = (77q - 2q²) - (70 + 17q)
P(q) = -2q² + 60q - 70
To maximize the profits, we just obtain the point where the profit function reaches a Maximum.
At the maximum of a function, (dP/dq) = 0 and (d²P/dq²) < 0
Profit = P(q) = -2q² + 60q - 70
(dP/dq) = -4q + 60
At maximum point,
(dP/dq) = -4q + 60 = 0
q = (60/4) = 15
(d²P/dQ²) = -4 < 0 (hence, showing that the this point corresponds to a maximum point truly)
Hence, the number, q, of units that produces maximum profit = 15.
b.) the price, p, per unit that produces maximum profit
The price per unit is given as
p = 77 - 2q
Maximum profit occurs at q = 15
p = 77 - (2×15) = 47
Hence, the price, p, per unit that produces maximum profit = 47 (currency not given in the question)
c.) the maximum profit, P.
The Profit function is given as
Profit = P(q) = -2q² + 60q - 70
At maximum Profit, q = 15
Maximum Profit = P(15)
= -2(15²) + 60(15) - 70
= 380 (currency not given in the question).
Hope this Helps!!!
A) The number, q, of units that produce maximum profit is = 15
B) The price, p, per unit that creates maximum profit is = 47
C) Maximum Profit is = P = 380
What is the cost and price function?
When The cost procedure and price per unit procedure are presented respectively as:
C(q) is = 70 + 17q
p is = 77 - 2q
where that q is = quantity or number of units
a.) When the number, q, of units that produce maximum profit
The Total cost is = C(q) = 70 + 17q
When the Revenue is = (price per unit) × (Number of units) that is = p × q = (77 - 2q) × q is = (77q - 2q²)
After that Profits is = P(q) = (Revenue) - (Total Cost)
Then P(q) is = (77q - 2q²) - (70 + 17q)
Now, P(q) is = -2q² + 60q - 70
When To maximize the profits, Then we just obtain the point where the profit function reaches a Maximum.
When At the maximum of a function, (dP/dq) is = 0 and (d²P/dq²) < 0
Profit is = P(q) = -2q² + 60q - 70
(dP/dq) is = -4q + 60
Then At maximum point are:
(dP/dq) is = -4q + 60 = 0
After that, q = (60/4) = 15
Then (d²P/dQ²) = -4 < 0 (hence, showing that this point corresponds to a maximum point truly)
Therefore, the number, q, of units that produce maximum profit is = 15.
b.) When the price, p, per unit that produces maximum profit
The price per unit is given as
p is = 77 - 2q
Then Maximum profit occurs at q is = 15
p is = 77 - (2×15) = 47
Therefore, the price, p, per unit that produces maximum profit is = 47 (currency not provided in the question)
c.) When the maximum profit, P.
The Profit function is given as
Profit is = P(q) = -2q² + 60q - 70
Then At maximum Profit, q = 15
So, The Maximum Profit is = P(15)
Then = -2(15²) + 60(15) - 70
Therefore, = 380 (currency not given in the question).
Find more information Cost and price function here:
https://brainly.com/question/17185609
The following materials standards have been established for a particular product: Standard quantity per unit of output 5.3 pounds Standard price $ 14.10 per pound The following data pertain to operations concerning the product for the last month: Actual materials purchased 6,150 pounds Actual cost of materials purchased $ 63,780 Actual materials used in production 5,650 pounds Actual output 790 units The direct materials purchases variance is computed when the materials are purchased. What is the materials quantity variance for the month?The following materials standards have been established for a particular product: Standard quantity per unit of output 5.3 pounds Standard price $ 14.10 per pound The following data pertain to operations concerning the product for the last month: Actual materials purchased 6,150 pounds Actual cost of materials purchased $ 63,780 Actual materials used in production 5,650 pounds Actual output 790 units The direct materials purchases variance is computed when the materials are purchased. What is the materials quantity variance for the month?
Answer:
Direct material quantity variance= $20,628.3
Explanation:
Giving the following information:
Standard quantity per unit of output 5.3 pounds
Standard price $14.10 per pound
Actual materials used in production 5,650 pounds
Actual output 790 units
To calculate the direct material quantity variance, we need to use the following formula.
Direct material quantity variance= (standard quantity - actual quantity)*standard price
Direct material quantity variance= (5.3*790 - 5,650)*14.1
Direct material quantity variance= $20,628.3
Schwiesow Corporation has provided the following information: Cost per Unit Cost per Period Direct materials $ 7.05 Direct labor $ 3.50 Variable manufacturing overhead $ 1.65 Fixed manufacturing overhead $ 11,000 Sales commissions $ 1.00 Variable administrative expense $ 0.40 Fixed selling and administrative expense $ 5,500 If the selling price is $18.70 per unit, the contribution margin per unit sold is closest to:
Answer:
The contribution margin per unit is $5.1
Explanation:
The contribution margin per unit is the amount from selling price per unit after deducting all the related variable costs per unit. This is the amount that each product contributes towards covering the fixed costs.
Contribution margin per unit:
Selling price per unit 18.7
Less : Variable cost per unit
Direct material (7.05)
Direct labor (3.5)
Variable manufacturing Overhead (1.65)
Sales commission (1.00)
Variable Admin expense (0.40)
Contribution margin per unit 5.1
A consumer values a house at $525,000 and a producer values the same house at $485,000. If the transaction is completed at $510,000, the transaction will generate: a. No surplus b. $25,000 worth of seller surplus and unknown amount of buyer surplus c. $15,000 worth of buyer surplus and $25,000 of seller surplus d. $25,000 worth of buyer surplus and unknown amount of seller surplus
Answer:
c. $15,000 worth of buyer surplus and $25,000 of seller surplus
Explanation:
Consumer surplus is the different between the value a consumer places on a product and the price of the product.
Consumer surplus = value of the product - price of the product
$525,000 - $510,000 = $15,000
Producer surplus is the difference between the price and the least price the seller is willing to sell his product.
Producer surplus = price - least price the seller is willing to sell his product
$510,000 - $485,000 = $25,000
I hope my answer helps you
Crimson Inc. recorded credit sales of $779,000, of which $590,000 is not yet due, $110,000 is past due for up to 180 days, and $79,000 is past due for more than 180 days. Under the aging of receivables method, Crimson Inc. expects it will not collect 3% of the amount not yet due, 14% of the amount past due for up to 180 days, and 21% of the amount past due for more than 180 days. The allowance account had a debit balance of $3,500 before adjustment. After adjusting for bad debt expense, what is the ending balance of the allowance account
Answer:
$49,690 credit balance
Explanation:
total credit sales = $590,000
past due up to 180 days = $110,000
past due for more than 180 days = $79,000
Crimson expects to not collect:
3% of credit sales not due yet = $590,000 x 3% = $17,70014% of credit sales past due up to 180 days = $110,000 x 14% = $15,400 21% of credit sales past due for more than 180 days = $79,000 x 21% = $16,590total = $49,690Allowance for uncollectible amounts has $3,500 debit balance
the adjusting entry should be:
Dr Bad debt expense 53,190
Cr Allowance for uncollectible accounts 53,190
The ending balance = $53,190 - $3,500 = $49,690
Garison Music Emporium carries a wide variety of musical instruments, sound reproduction equipment, recorded music, and sheet music. Garison uses two sales promotion techniques— warranties and premiums— to attract customers.
Below is the information to answer the required question.
a. Musical instruments and sound equipment are sold with a one- year warranty for replacement of parts and labor. The estimated warranty cost, based on past experience, is 2% of sales.
b. The premium is offered on the recorded and sheet music. Customers receive a coupon for each dollar spent on recorded music or sheet music. Customers may exchange 200 coupons and $ 20 for a CD player. Garison pays $ 32 for each CD player and estimates that 60% of the coupons given to customers will be redeemed.
c. Garison’s total sales for 2010 were $ 7,200,000—$ 5,700,000 from musical instruments and sound reproduction equipment and $ 1,500,000 from recorded music and sheet music.
d. Replacement parts and labor for warranty work totaled $ 164,000 during 2010.
e. A total of 6,500 CD players used in the premium program were purchased during the year and there were 1,200,000 coupons redeemed in 2010.
f. The accrual method is used by Garison to account for the warranty and premium costs for financial reporting purposes.
The balances in the accounts related to warranties and premiums on January 1, 2010, were as shown below.
Inventory of Premium CD Players $ 37,600
Estimated Premium Claims Outstanding 44,800
Estimated Liability from Warranties 136,000
Question:
(a) Garison Music Emporium is preparing its financial statements for the year ended December 31, 2010. Determine the amounts that will be shown on the 2010 financial statements for the following.
(1) Warranty Expense -
(2) Estimated Liability from Warranties -
(3) Premium Expense -
(4) Inventory of Premium CD Players -
(5) Estimated Premium Claims Outstanding -
Answer:
Explanation:
(a)
Given:
Warranty exp = 2% of musical instrument & sound equipment
Calculation:
Warranty exp = Warranty exp * 5,424,000
Warranty exp = 2% * 5,424,000
Warranty exp = 108,480
(b)
Warranty liability as on December 2017 = Opening Balance + Warranty Expense - Warranty Claim
Warranty liability as on December 2017 = 138,000 + 108,480 - 156,400
Warranty liability as on December 2017 = $90,080
(c)
The customer receives one coupon for each dollar spend 2,138,000 only 50% coupon will be redeemed.
Exp provision liability created = 50% * 2,138,000
Exp provision liability created = 1,069,000
Customer can exchange 200 coupon & $30 for MP3 player which is purchase for 42 that mean 200 coupon will be for 12 i.e. (42-30) value of coupon will be
12
200
= 0.06.
Value of 1,069,000 coupon = 1,069,000 * 0.06
Value of 1,069,000 coupon = 64,140
(d)
1,138,000 coupons had been redeemed during the year each MP3 player required 200 coupons.
N
o
o
f
M
P
3
p
l
a
y
e
r
o
f
f
e
r
e
d
=
1
,
138
,
000
200
N
o
o
f
M
P
3
p
l
a
y
e
r
o
f
f
e
r
e
d
=
5
,
690
M
P
3
p
l
a
y
e
r
Cost = 5,690 * 42
Cost = 238,980
Inventory Premium = Opening Balance + Purchases - Utilized Redeemed Coupon
Inventory Premium = 39,210 + (7,010 * 42) - 238,980
Inventory Premium = 39,210 + 294,420 - 238,980
Inventory Premium = $94,650
(e)
Premium liability balance = Opening Balance + Premium Exp Provision - Coupon Redeemed
Premium liability balance = 41,670 + 64,140 - (1,138,000 * 0.06)
Premium liability balance = 41,670 + 64,140 - 68,280
Premium liability balance = 37,530
Offenbach & Son has just made its sales forecasts and its marketing department estimates that the company will sell 232,200 units during the coming year. In the past, management has maintained inventories of finished goods at approximately one month’s sales. The inventory at the start of the budget period is 15,600 units. Sales occur evenly throughout the year. Required: Estimate the production level required for the coming year to meet these objectives.
Answer:
Production= 235,950 units
Explanation:
Giving the following information:
Sales= 232,200 units during the coming year.
Desired ending inventory= one month's sales
Beginning inventory= 15,600 units.
First, we need to calculate the desired ending inventory:
Desired ending inventory= 232,200/12= 19,350
Now, we can determine the production for the year:
Production= sales + desired ending inventory - beginning inventory
Production= 232,200 + 19,350 - 15,600
Production= 235,950 units
A strategic plan is a carefully crafted set of steps that a firm intends to follow in order to be successful. The business model is a central element of a firm’s strategic plan and describes the process whereby a company hopes to earn profits and outperform the competition. The importance of an effective strategy cannot be overstated. With this in mind provide a substantive response to the questions below: Think about the best and worst companies you know. What is extraordinary (or extraordinarily bad) about these firms? Are their strategies clear and focused or difficult to define? Explain.
Answer:
A business model integrated with the well-developed and analytical strategic plan is essential for any company that plans to achieve market position, without these two tools it is impossible for a company to survive in the highly competitive market in the long term.
It is through the business model and strategic planning that the company identifies itself, outlines its mission, values and action plans to achieve the objectives.
The most successful companies in the world are well-organized companies, who know what direction they want to go, their identity, their strengths and weaknesses, their competitors, etc.
A company with clear and focused strategies is Apple, one of the largest technology companies in the world, which strategically sought to become the most important company in the world, therefore it developed innovative products that revolutionized the market and made the company a reference in the manufacture of cell phones, computers and electronic devices. Apple has created a value and consumer identity proposition for its products that was only possible thanks to analytical strategic decisions envisaged through effective planning.
Suire Corporation is considering dropping product D14E. Data from the company's accounting system appear below: Sales $ 600,000 Variable expenses $ 241,000 Fixed manufacturing expenses $ 232,000 Fixed selling and administrative expenses $ 180,000 All fixed expenses of the company are fully allocated to products in the company's accounting system. Further investigation has revealed that $192,500 of the fixed manufacturing expenses and $107,500 of the fixed selling and administrative expenses are avoidable if product D14E is discontinued. Required: a. According to the company's accounting system, what is the net operating income earned by product D14E
Answer:
$127,000
Explanation:
Suire Corporation Net operating income
Sales $ 600,000
Variable Costs $ 241,000
Contribution Margin $ 359,000
Fixed Expenses $232,000
Net Operating Income $127,000
In this assignment, you will develop a more personalized understanding of the Balanced Scorecard concept and see how your vision and mission can be linked to your goals and objectives. Using the S-M-A-R-T tools in section 6.7 of Chapter 6 in the text, create your own list of goals and objectives.
Create 4 to 5 S-M-A-R-T goals and objectives and demonstrate how they link to your Strategy Diamond and personal vision and mission statements.
Explanation:
The following are my SMART goals:-
Specific
1. I want to be physically fit within 6 months on order to be able to run a marathon in less than 3 hours.
2. I want to become a manager in my current organization from my current position as an assistant manager within the next 3 years in order to be able lead a team.
3. I want to be a lovable dad to my daughter in the next 3 months so that I can spend more quality time with her.
4. I want to become an amazing husband to my wife by spending more quality time with her and also taking her on vacations in the next 6 months.
Measurable
1. I would start my training from next week. Initially I would run 3 to 5 kilometers with walk breaks.
2. I would talk to my boss next week to ask for more responsibilities and also to ask him to let me know what is required to get promoted.
3. I would start leaving office early by being more efficient and effective in the office. I will also take my daughter on walks and play with her for 1 hour daily.
4. I would come back from office early and spend time with my wife.
Attainable
1. I will talk to other marathoners to know whether my goal is attainable and will also research about it.
2. I will talk to my colleagues whom are managers about what they did to get promoted.
3. I will talk to other dads to know whether my goal is attainable.
4. I will talk to other husbands that are successful.
Realistic
When I start measuring my progress weekly and getting a feedback from people whom I admire, then I would know how realistic my goals are.
Timely
I have given a time frame for the attainment of all these goals which is very vital.
For implementing these goals, I m going to use the Plan-Do-Act-Dare cycle.
Since my objective is to become a well rounded person in my personal and also my professional life, the above steps will surely help me in becoming that person.
The strategy diamond will consist of:-
1. Arenas- Professional and Personal
2. Vehicles- Focus and hard work
3. Differentiation- Being different and unique from others.
4. Staging- Speed of initiatives
Also, there should be an economic logic binding this.
What are antitrust laws? Laws governing the management of state-owned enterprises. Legislation enacted to prevent the encroachment of government into the private sector. Laws meant to protect businesses from unfair treatment from consumers. Laws meant to eliminate collusion and promote competition among firms. Identify the first antitrust law and its purpose. The Clayton Act of 1950 toughened restrictions on mergers by prohibiting any merger that leads to reduced competition. The Federal Trade Commission Act of 1914 established the FTC. The Robinson-Patman Act of 1936 prohibited anticompetitive price discrimination. The Sherman Act of 1890 prohibits price fixing, collusion, and monopolization. The Clayton Act of 1890 prohibits firms from owning stock in competing firms. The Sherman Act of 1914 established the Federal Trade Commission.
Answer: 1. Laws meant to eliminate collusion and promote competition among firms.
2. The Sherman Act of 1890 prohibits price fixing, collusion, and monopolization.
Explanation:
1. Anti-trust laws are meant to protect the customer from predatory practices by businesses such as collusion hence ensuring that there is competition in the market for the benefit of the consumer.
2. Named after the man who introduced it, Sen. John Sherman, the Sherman Act was passed in 1890 as the first Anti-trust law in the United States of America. It was meant to ensure that competition existed between Enterprises for the benefit of ordinary citizens.
Rembrandt Paint Company had the following income statement items for the year ended December 31, 2021 ($ in thousands): Sales revenue $ 24,000 Cost of goods sold $ 13,500 Interest revenue 220 Selling and administrative expense 3,100 Interest expense 420 Restructuring costs 1,400 In addition, during the year the company completed the disposal of its plastics business and incurred a loss from operations of $2.2 million and a gain on disposal of the component’s assets of $3.2 million. 600,000 shares of common stock were outstanding throughout 2021. Income tax expense has not yet been recorded. The income tax rate is 25% on all items of income (loss). Required: Prepare a multiple-step income statement for 2021, including EPS disclosures. (Amounts to be deducted should be indicated with a minus sign. Enter your answers in thousands except earnings per share. Round EPS answers to 2 decimal places.)
Answer:
Rembrandt Paint CompanyIncome Statement - December 31, 2021Sales revenues $24,000,000
- Cost of goods sold ($13,500,000)
Gross margin $10,500,000
Operating expenses:
- Selling and adm. expenses ($420,000)
- Restructuring costs ($1,400,000)
Total operating expenses ($1,820,000)
Income from operations $8,620,000
Other revenue and expenses:
Gain on sales of assets $3,200,000
Interest revenue $220,000
Loss from discontinued oper. ($2,200,000)
Interest expense ($420,000)
Total other revenue and expenses $800,000
Net income pre-tax $9,420,000
Income taxes (25%) ($2,355,000)
Net income after taxes $7,065,000
Shares outstanding 600,000
Earnings per share (EPS) $11.78
Capacity management, denominator-level capacity concepts. Match each of the following numbered descriptions with one or more of the denominator-level capacity concepts by putting the appropriate letter(s) by each item:a) Theoretical capacity b) Practical capacity c) Normal capacity utilization d) Master-budget capacity utilization 1. Measures the denominator level in terms of what a plant can supply. 2. Is based on producing at full efficiency all the time.3. Represents the expected level of capacity utilization for the next budget period. 4. Measures the denominator level in terms of demand for the output of the plant. 5. Takes into account seasonal, cyclical, and trend factors. 6. Should be used for performance evaluation in the current year. 7. Represents an ideal benchmark. 8. Highlights the cost of capacity acquired but not used. 9. Should be used for long-term pricing purposes. 10. Hides the cost of capacity acquired but not used. 11. If used as the denominator-level concept, would avoid the restatement of unit costs when expected demand levels change?
Answer:
1. Theoretical and Practical capacity: Measures the denominator level in terms of what a plant can supply
2. Theoretical capacity: Is based on producing at full efficiency all the time.
3. Master-budget capacity utilization: Represents the expected level of capacity utilization for the next budget period.
4. Normal and Master-budget capacity: Measures the denominator level in terms of demand for the output of the plant.
5. Normal capacity utilization: Takes into account seasonal, cyclical, and trend factors.
6. Master-budget capacity utilization: Should be used for performance evaluation in the current year.
7. Theoretical capacity: Represents an ideal benchmark.
8. Theoretical and Practical capacity: Highlights the cost of capacity acquired but not used.
9. Master-budget capacity utilization: Should be used for long-term pricing purposes.
10. Normal and Master-budget capacity: Hides the cost of capacity acquired but not used.
11. Theoretical and Practical capacity: If used as the denominator-level concept, would avoid the restatement of unit costs when expected demand levels change.
Explanation:
Capacity is the maximum level of output that an organization can optimally sustain, to produce goods or provide service to meet it's customer demands.
The denominator-level capacity is a concept used under the capacity management. Denominator-level capacity concept is used to ascertain the capacity level that is considered for analyzing a production process or business operations. They are classified as follows;
i. Normal capacity utilization is based on the level of capacity utilization which satisfy the average customer demand periodically such as trend, cyclical and seasonal factors.
ii. Master-budget capacity utilization is based on the level of capacity expected for the current budget period, typically a year.
iii. Theoretical capacity is the denominator-level concept based on producing continuously at full efficiency.
iv. Practical Capacity is based on the level of capacity that involves unavoidable operating interruptions, such as scheduled equipment maintenance or repair time, holiday shutdowns etc.
According to the Air Transport Association of America, the average operating cost of an MD-80 jet airliner is $2,087 per hour. Suppose the operating costs of an MD-80 jet airliner are normally distributed with a standard deviation of $174 per hour. (Round the value of z to 2 decimal places. Round your answers to 2 decimal places.) (a) At what operating cost would only 23% of the operating costs be less? $Entry field with correct answer 1958.44 (b) At what operating cost would 65% of the operating costs be more? $Entry field with correct answer 2019.95 (c) What operating cost would be more than 85% of operating costs ?
Answer:
(a)$1955
(b)$2017.19
(c)$2273.16
Explanation:
Check attachment
Martin Services Company provides its employees vacation benefits and a defined contribution pension plan. Employees earned vacation pay of $49,000 for the period. The pension plan requires a contribution to the plan administrator equal to 6% of employee salaries. Salaries were $500,000 during the period. a. Provide the journal entry for the vacation pay. b. Provide the journal entry for the pension benefit.
Answer:
a. Provide the journal entry for the vacation pay
Debit Vacation and Holiday expense $49,000
Credit Vacation and Holiday payable $49,000
(To record earned Vacation and Holiday expenses)
b. Provide the journal entry for the pension benefit
Debit Pension expense $30,000
Credit Pension liability $30,000
(Being pension benefit recognition)
Explanation:
The earned vacation and holiday expense has to be recognized in line with the accrual principle of accounting.The pension benefit was also recognized in line with the accrual principle of account. The pension plan is a contribution of 6% of employee salaries, which amounted to $500,000. So, 0.06 x 500,000 = $30,000.The Red Wolf Society, a nongovernmental not-for-profit organization, receives numerous contributed hours from volunteers during its busy season. Tom, a clerk at the local government utility’s office, volunteered ten hours per week for 8 weeks transferring wolf food from the port to the wolf shelter. His rate of pay at the utility office is $20 per hour, and the prevailing wage rate for laborers is $15 per hour. What amount of contribution revenue should Red Wolf Society record for this service? Multiple Choice $1,200 $400 $1,600 $0
Answer:
$1,600
Explanation:
Revenue is recognized as and when the control of a good or service is transferred to the customer.
Total Hours = 10 hours × 8 weeks
= 80 hours
Use the rate of pay at the utility office to determine the contribution revenue for Red Wolf Society
Revenue = 80 hours × $20 per hour
= $1,600
(Ignore income taxes in this problem) The management of Serpas Corporation is considering the purchase of a machine that would cost $180,000, would last for 5 years, and would have no salvage value. The machine would reduce labor and other costs by $46,000 per year. The company requires a minimum pretax return of 13% on all investment projects. The net present value of the proposed project is closest to:
Answer:
-$18,207
Explanation:
Net present value is the Net value all cash inflows and outflows in present value term. All the cash flows are discounted using a required rate of return.
Net Present Value = Initial Investment + Present value of reduced Labor and other costs
Net Present value = -$180,000 + $46,000( 1 - ( 1 + 13% )^-5 / 13% )
Net Present value = -$180,000 + 161,793
Net Present value = -$18,207
The Donut Stop acquired equipment for $10,000. The company uses straight-line depreciation and estimates a residual value of $2,000 and a four-year service life. At the end of the second year, the company estimates that the equipment will be useful for four additional years, for a total service life of six years rather than the original four. At the same time, the company also changed the estimated residual value to $1,000 from the original estimate of $2,000. Calculate how much The Donut Stop should record each year for depreciation in years 3 to 6.
Answer:
Cost of Equipment: $10,000
Less Accumulated Depreciation ($10,000 - $2,000 / 4*2): $4,000
= Book Value (End of Year 2): $6,000
Less New Residual Value: $-1,000
= New Depreciated Cost: $5,000
Remaining Service Life: 4
Annual Depreciation in Years 3 to 6 ($5,000 / 4): $1,250
Depreciation by Two Methods A storage tank acquired at the beginning of the fiscal year at a cost of $80,000 has an estimated residual value of $4,000 and an estimated useful life of 20 years. a. Determine the amount of annual depreciation by the straight-line method. $ b. Determine the amount of depreciation for the first and second years computed by the double-declining-balance method. Do not round the double-declining balance rate. If required, round your answers to the nearest dollar.
Answer:
a. Annual depreciation = $3,800
b. First year depreciation is $8,000' while second year depreciation is $7,200.
Explanation:
a. Determine the amount of annual depreciation by the straight-line method.
Depreciable amount = $80,000 - $4,000 = $76,000
Annual depreciation = $76,000 / 20 = $3,800
b. Determine the amount of depreciation for the first and second years computed by the double-declining-balance method. Do not round the double-declining balance rate. If required, round your answers to the nearest dollar.
Straight line depreciation rate = 1 / 20 = 0.05, or 5%
Double declining depreciation rate = 5% * 2 = 10%
First year depreciation = $80,000 * 10% = $8,000
Second year depreciation = ($80,000 - $8,000) * 10% = $7,200
The balance sheets for Plasma Screens Corporation and additional information are provided below. PLASMA SCREENS CORPORATION Balance Sheets December 31, 2021 and 2020 2021 2020 Assets Current assets: Cash $ 242,000 $ 130,000 Accounts receivable 98,000 102,000 Inventory 105,000 90,000 Investments 5,000 3,000 Long-term assets: Land 580,000 580,000 Equipment 890,000 770,000 Less: Accumulated depreciation (528,000 ) (368,000 ) Total assets $ 1,392,000 $ 1,307,000 Liabilities and Stockholders' Equity Current liabilities: Accounts payable $ 109,000 $ 95,000 Interest payable 7,000 13,000 Income tax payable 9,000 6,000 Long-term liabilities: Notes payable 110,000 220,000 Stockholders' equity: Common stock 800,000 800,000 Retained earnings 357,000 173,000 Total liabilities and stockholders' equity $ 1,392,000 $ 1,307,000 Additional information for 2021: Net income is $184,000. Sales on account are $1,890,000. Cost of goods sold is $1,394,250. Required: 1. Calculate the following risk ratios for 2021:
Answer and Explanation:
The risk ratios are calculated below:
1. Account Receivable Turnover
= Net credit Sales ÷ Average Accounts Receivable
= $1,890,000 ÷ (($98,000 + $102,000) ÷ 2)
= $1,890,000 ÷ $100,000
= 18.9 times
It shows the relation between the net credit sales and the average account receivable
2. Inventory Turnover = Cost of Goods Sold ÷ Average Inventory
= $1394250 ÷ (($105,000 + $90,000) ÷ 2)
= $1,394,250 ÷ $97,500
= 14.3 times
It shows the relation between the cost of goods sold and the average inventory
c. Current Ratio = Current assets ÷ Current Liabilities
= ($242,000 + $98,000 + $105,000 + $5,000) ÷ ($109,000 + $7,000 + $9,000)
= $450,000 ÷ $125,000
= 3.6 times
It shows the relation between the current assets and the current liabilities
d. Acid Test Ratio = Liquid assets ÷ Current Liabilities
= ($450,000 - $105,000) ÷ ($125,000 )
= $345,000 ÷ $125,000
= 2.76 times
It shows the relation between the liquid assets which do not involved prepaid assets, inventory, etc and the current liabilities
e. Debt to Equity = Debt ÷ Equity
= ($109,000 + $7,000 + $9,000 + $110,000) ÷ ($800,000 + $357,000 )
= $235,000 ÷ $1,157,000
= 0.203
It shows the relation between the debt and equity
1. Account Receivable Turnover
= Net credit Sales ÷ Average Accounts Receivable
= $1,890,000 ÷ (($98,000 + $102,000) ÷ 2)
= $1,890,000 ÷ $100,000
= 18.9 times
It represents the relationship between the net credit sales and the average account receivable.
2. Inventory Turnover = Cost of Goods Sold ÷ Average Inventory
= $1394250 ÷ (($105,000 + $90,000) ÷ 2)
= $1,394,250 ÷ $97,500
= 14.3 times
It represents the relationship between the cost of goods sold and the average inventory.
c. Current Ratio = Current assets ÷ Current Liabilities
= ($242,000 + $98,000 + $105,000 + $5,000) ÷ ($109,000 + $7,000 + $9,000)
= $450,000 ÷ $125,000
= 3.6 times
It represents the relationship between the current assets and the current liabilities.
d. Acid Test Ratio = Liquid assets ÷ Current Liabilities
= ($450,000 - $105,000) ÷ ($125,000 )
= $345,000 ÷ $125,000
= 2.76 times
It represents the relationship between the liquid assets in which it does include prepaid assets, inventory, etc and the current liabilities.
e. Debt to Equity = Debt ÷ Equity
= ($109,000 + $7,000 + $9,000 + $110,000) ÷ ($800,000 + $357,000 )
= $235,000 ÷ $1,157,000
= 0.203
It represents the relationship between the debt and equity.
Learn more: brainly.com/question/19682087
When China reformed state-owned enterprises, it tried a new approach to choosing managers: it put managerial jobs up for auction. The bids for the jobs consisted of promises of future profit streams that the managers would generate and then deliver to the state. In cases where the incumbent manager was the winning bidder, firm productivity tended to increase dramatically. When outside bidders won, there was little productivity improvement. If incumbent managers were not generally more qualified, how can you explain this result?
Answer: The explanation is provided below
Explanation:
An outsider tend to overbid with a eye to get the job while, an insider manager bids a realistic performance that is achievable. An insider manager understands the factors which affect the organization's performance and then tries to take control of the factors.
People make or break organizations and there is a greater chance of the insider getting the support and cooperation of the employees in comparision to outside bidders. Also, an insider manager has a prospective that is long term with regard to his or her association with the enterprise while an outsider may come and then realize that he doesn't like the organization and then leave for a better enterprise.
Therefore internal managers are a better prospect of being given the responsibility to manage the enterprise.
Answer:
Explanation:
A stranger tends to bid excessively to get the job. In contrast, the internal manager offers realistic, achievable performance. The internal manager understands the factors that influence the organization's performance and tries to take control of it. There is a greater chance that an insider will get employee support and cooperation than strangers . Insider manager has been in the organisation for and already know the rules that guide the company, The Dos ans Donts.. A stranger have lilttle or no knowledge about how the company is run and can choose to stay or he will go to a better company. Therefore, internal managers are in good position for taking responsibility for running the welfare and activites of a company.
The following data are taken from the management accounting reports of Dulcimer Co.: Div. ADiv. BDiv. C Income from operations$1,900,000$1,450,000$1,450,000 Total service department charges1,700,0001,050,0001,100,000 If an incentive bonus is paid to the manager who achieved the highest income from operations before service department charges, it follows that a.Division C's manager is given the bonus b.Division B's manager is given the bonus c.Divisions B and C's managers divide the bonus d.Division A's manager is given the bonus
Answer:
Option D
Explanation:
In simple words, the bonus in the given question has to be paid to the managers before the service department charges expenditures which are declining the income from operations. Therefore, it is clearly evident that manager A has best performed in respect to gross revenue collection.
However, the total efficiency is particularly maintained mostly by C division manager as his net income is the highest of them all three. Hence the correct option is D.
Fixed expenses are $384,000 per month. The company is currently selling 6,000 units per month. The marketing manager would like to introduce sales commissions as an incentive for the sales staff. The marketing manager has proposed a commission of $9 per unit. In exchange, the sales staff would accept a decrease in their salaries of $46,000 per month. (This is the company's savings for the entire sales staff.) The marketing manager predicts that introducing this sales incentive would increase monthly sales by 500 units. What should be the overall effect on the company's monthly net operating income of this change?
Answer:
A reduction of $12,500 in net operating income
Explanation:
The net operating income/loss is the difference between the sales and the total costs.
The change in the company's net operating income is the net of the increased commission and the total decrease in salaries. The commission is a variable cost that is dependent on the total number of units sold.
Hence the overall effect on the company's monthly net operating income of this change
= $46,000 - ($9 * 6500)
= ($12,500)
COST VOLUME PROFIT ANALYSIS Comfort Homeless Inc, a factory that produces beds for homeless shelters, is considering extending its production and introducing a new bed with ungraded features this upcoming spring season. The selling price for the each of the beds is $48. Currently, to produce the beds, Comfort Homeless Inc states it cost $22. The variable cost total $6, whereas month fixed costs are $16,000. Instructions: a. Calculate the breakeven point in units .(20 points) b. Comfort Homeless Inc. increases its selling price from $48 a bed to $49.95 a bed. Calculate the new breakeven points in units. (20 points) c. Find the new breakeven point in units if the cost to produce the beds will decrease to $19 each because a new supplier was found when purchasing the raw materials. (20 points) d. Comfort Homeless Inc. is considering selling mattresses. It only expects to sell one mattress for every bed it sells. Comfort Homeless Inc. can purchase the mattresses for $5 each and sell them for $9 each. Total fixed cost should remain the same at $16,000 per month. Calculate the breakeven point in units for beds and mattresses. (40 points)
Answer:
Instructions are below.
Explanation:
Giving the following information:
Selling price per unit= $48
Unitary variable cost= $6
Total fixed costs= $16,000
A)
To calculate the break-even point in units, we need to use the following formula:
Break-even point in units= fixed costs/ contribution margin per unit
Break-even point in units= 16,000/ (48 - 6)
Break-even point in units= 381 units
B) Selling price= $49.95 a bedpoints
Break-even point in units= 16,000/ (49.95 - 6)
Break-even point in units= 364 units
C) Unitary variable cost= 6 - 3= 3
Break-even point in units= 16,000 / (48 - 3)
Break-even point in units= 356 units
D) Matresses= 1
Beds= 1
Proportions of sales:
Matreses= 0.5
Beds= 0.5
Selling price per matress= $9
Unitary variable cost= $5
Break-even point (units)= Total fixed costs / Weighted average contribution margin ratio
Weighted average contribution margin ratio= (weighted average selling price - weighted average unitary variable cost)
Weighted average contribution margin ratio= (0.5*9 + 0.5*48) - (0.5*5 + 0.5*6)
Weighted average contribution margin ratio= $23
Break-even point (units)= 16,000/23
Break-even point (units)= 696 units
What accounting assumption, principle, or constraint would Target Corporation use in each of the situations below? (a) Target was involved in litigation over the last year. This litigation is disclosed in the financial statements. select an option (b) Target allocates the cost of its depreciable assets over the life it expects to receive revenue from these assets. select an option (c) Target records the purchase of a new Dell PC at its cash equivalent price. select an option
Answer:
a. ASC 450 (previously recognized as SFAS 5) includes the declaration of a risk in proceedings and there is at minimum a "fair probability" that a loss has been sustained, and the report must provide an estimation of the probable damage or extent of damage or a declaration that this very calculation is not practicable.
b. Three specific criteria dictate however much depreciation they can subtract: (1) the real estate value, (2) the property rehabilitation time and (3) the form of depreciation utilized. You can't actually subtract as an benefit the lease or interest contributions, or the cost of furniture, decorations and appliances. The depreciation will only be deducted on the specific property used during leasing purposes.
c. For overclockers as well as operation in the federation the Computer is still the obvious winner. If you want to change hardware to maintain the cutting edge of your program, then a Laptop is the way forward. Further software must be installed for the PC like a large and ever-growing free software computer collection. Even so, thanks to an embedded tool named "Boot camp," you can install a Windows ® operating system on a Mac along with PC applications
Teall Corporation has a standard cost system in which it applies manufacturing overhead to products on the basis of standard machine-hours (MHs). The company has provided the following data for the most recent month: Budgeted level of activity 9,000 MHs Actual level of activity 9,100 MHs Standard variable manufacturing overhead rate $ 6.20 per MH Budgeted fixed manufacturing overhead cost $ 55,000 Actual total variable manufacturing overhead $ 56,600 Actual total fixed manufacturing overhead $ 59,500 What was the fixed manufacturing overhead budget variance for the month?
Answer:
$4,500 U
Explanation:
Teall Corporation
Budget variance = Actual fixed overhead cost − Budgeted fixed overhead cost
Actual total fixed manufacturing overhead $ 59,500
Less Budgeted fixed manufacturing overhead cost $ 55,000
Fixed manufacturing overhead budget variance for the month $4,500 U
Therefore the fixed manufacturing overhead budget variance for the month is $4,500 U
Morrish Inc. bases its manufacturing overhead budget on budgeted direct labor-hours. The direct labor budget indicates that 7,100 direct labor-hours will be required in January. The variable overhead rate is $1.80 per direct labor-hour. The company's budgeted fixed manufacturing overhead is $102,950 per month, which includes depreciation of $19,880. All other fixed manufacturing overhead costs represent current cash flows. The January cash disbursements for manufacturing overhead on the manufacturing overhead budget should be:
Answer:
$95,850
Explanation:
To calculate cash disbursements for manufacturing overhead:
Direct labor cost + Fixed manufacturing overhead
where,
direct labor cost = Direct labor hours × per labor rate
= $7,100 x $1.8 =
$12,780
Budgeted fixed manufacturing overhead - depreciation
102,950 - 19880 =
Direct labor cost + Fixed manufacturing overhead =
$83,070 + $12,780
= $95,850
The January cash disbursements for manufacturing overhead on the manufacturing overhead budget should be $95,850
Answer:
The January cash disbursements for manufacturing overhead on the manufacturing overhead budget should be $95,850
Explanation:
In order to calculate the the January cash disbursements for manufacturing overhead on the manufacturing overhead budget we would have to use the following formula:
Total cash disbursement for overhead in January =Variable overhead+Cash portion of fixed manufacturing overhead
Variable overhead = 7,100 direct labor-hours × $1.80 = $12,780
Cash portion of fixed manufacturing overhead = $102,950 - $19,880 = $83,070
Therefore, Total cash disbursement for overhead in January = $12,780 + $83,070
Total cash disbursement for overhead in January =$95,850
The January cash disbursements for manufacturing overhead on the manufacturing overhead budget should be $95,850
On January 1, 2017, Shamrock Inc. issued $400,000 of 7%, 5-year bonds at par. Interest is payable semiannually on July 1 and January 1. Prepare journal entries to record the following. (Credit account titles are automatically indented when the amount is entered. Do not indent manually. If no entry is required, select "No Entry" for the account titles and enter 0 for the amounts. Record journal entries in the order presented in the problem.) (a) The issuance of the bonds. (b) The payment of interest on July 1. (c) The accrual of interest on December 31.
Answer and Explanation:
The journal entries are shown below:
On Jan 1
Cash $400,000
To Bonds payable $400,000
(Being the bond is issued for cash)
For recording this we debited the cash as it increased the assets and at the same time it increased the liabilities so the bond payable is credited
On July 1
Interest expense $14,000
To Cash $14,000
(Being the payment of interest is recorded)
The computation is shown below:
= $400,000 × 7% × 6 months ÷ 12 months
= $14,000
For recording this we debited the expenses as it increased the expenses and at the same time it decreased the assets so the cash is credited
On Dec 31
Interest expense $14,000
To Interest payable $14,000
(Being the accrual of interest is recorded)
For recording this we debited the expenses as it increased the expenses and at the same time it increased the liabilities so the interest payable is credited
Paolucci Corporation's relevant range of activity is 8,400 units to 17,000 units. When it produces and sells 12,700 units, its average costs per unit are as follows: Average Cost per Unit Direct materials $ 7.10 Direct labor $ 4.00 Variable manufacturing overhead $ 2.00 Fixed manufacturing overhead $ 3.60 Fixed selling expense $ 1.30 Fixed administrative expense $ 0.60 Sales commissions $ 1.25 Variable administrative expense $ 0.50 If 11,700 units are sold, the variable cost per unit sold is closest to:
Answer:
The variable cost per unit sold is closest to $14.85
Explanation:
In order to calculate the variable cost per unit sold we would have to use the following formula:
Total variable cost per unit=(Direct materials+Direct labor+Variable manufacturing overheads+Sales commissions+Variable adminsitrative expenses)
Therefore,Total variable cost per unit=$7.10+$4.00+$2.00+$1.25+$0.50
Total variable cost per unit=$14.85
The variable cost per unit sold is closest to $14.85
