Susan was investigating which glue would make the strongest craft stick tower. She
tested rubber cement, Elmer's glue-all, and Super Glue. She will test the strength of the
towers with books as the weight.
What is the independent variable?

Answer:

C) SO3

Explanation:

Lewis formula shows the bonding between atoms of a molecule and expresses the lone pair present in the atoms.

SO3 or Sulfur trioxide cannot be adequately described by a single Lewis formula because it has majorly 3 resonance structures because Sulfur does not follow the octet rule and can expand electrons in its outer shell.

Hence, the correct answer is C) SO3

Answer:

B

Explanation:

Increasing distance between the objects factor will cause the gravitational force between two objects to decrease. Therefore, option B is correct.

The gravitational force grows in proportion to the size of the masses . The gravitational force weakens rapidly as the distance between masses grows. Unless at least one of the objects has a lot of mass, detecting gravitational force is extremely difficult.

Gravity is affected by object size and distance between objects. Mass is a unit of measurement for the amount of matter in an object.

The force of gravity is proportional to the masses of the two objects and inversely proportional to the square of the distance between them. This means that the force of gravity increases with mass but decreases as the distance between objects increases.

Thus, option B is correct.

To learn more about the gravitational force, follow the link;

https://brainly.com/question/12528243

#SPJ6

The correct answer is 3 liters

Explanation:

If a substance has a solubility of [tex]12 \frac{grams}{liter}[/tex], this means in 1 liter, the grams that can be dissolved are 12 grams. Now, considering Justin and Ellie need to dissolve 36 grams to calculate the number of liters just divide the total of grams into 12 as each liter dissolves only 12 grams. The process is shown below:

36 grams (the amount that will be dissolved) ÷ 12 (grames dissolved per liter) = 3 liters (liters to dissolved 36 grams)

Answer:

It would be 3 liters

Explanation:

Answer:

V= n/M

Explanation:

From;

π = nRT/V = MRT

Where;

n= number of moles

R= gas constant

T= absolute temperature

M= molar mass

V= volume of the solution

π= osmotic pressure

Thus;

nRT/V = MRT

nRT = VMRT

V= nRT/MRT

V= n/M

Answer:

C) 237.96682 amu

Explanation:

The symbol for neptunium-236 is given as;

²³⁶₉₃Np

This element has 93 protons and (236 - 93 = 143) neutrons.

Mass Number =Total mass of Protons + Total mass of neutrons

Total Mass pf protons = 93 * 1.007825 amu, = 93.727725 amu

Total mass of Neutrons = 143 * 1.008665 amu = 144.239095 amu

Mass = 144.239095 + 93.727725  = 237.96682 amu

Correct option is option C.

Answer:

H2SO4 with concentrated HCl

The graph is not given in the question, so, the required graph is attached below:

Answer:

According to the graph, the relationship between the density of the sugar solution and the concentration of the sugar solution is directly proportional to each other as they both are increasing exponentially.

The graph shows that, the density of sugar solution will increase with the increase in concentration of sugar in the solution.

Answer:

6.93

Explanation:

Step 1: Given data

Step 2: Convert the temperature to the Kelvin scale

We will use the following expression.

K = °C + 273.15

K = 50°C + 273.15

K = 323 K

Step 3: Calculate K

We will use the following expression.

∆G° = -R × T × ln K

-5.20 × 10³ J = -(8.314 J/mol.K) × 323 K × ln K

K = 6.93

Answer:

Bisphenol A (BPA)

Explanation:

Bisphenol A (BPA) is a chemical additive commonly found in resins and plastics, such as water bottles or food containers. It can also be found in household electronics, medical devices, dental fillings and sales receipts, just to name a few other applications.

Answer:

[tex]\huge\boxed{Density}[/tex]

Explanation:

This is because of density. Since Ice is less dense than water, the ice even formed inside the pond then starts floating on the surface of water. Because of this density, Ice floats on water and thus the water freezes at the surface.

Answer:

Density

Explanation:

Water is less dense as a solid than as a liquid, so as ponds freeze, the ice floats at the top and the pond freezes from the top-down.

Answer:

[tex]Molar \ solubility=3.12x10^{-5}M[/tex]

Explanation:

Hello,

In this case, for the dissociation of calcium fluoride:

[tex]CaF_2(s)\rightleftharpoons Ca^{2+}+2F^-[/tex]

The equilibrium expression is:

[tex]Ksp=[Ca^{2+}][F^-]^2[/tex]

In such a way, via the ICE procedure, including an initial concentration of calcium of 0.01 M (due to the calcium nitrate solution), the reaction extent [tex]x[/tex] is computed as follows:

[tex]3.9x10^{-11}=(0.01+x)(2*x)^2\\\\x=0.0000312M[/tex]

Thus, the molar solubility equals the reaction extent [tex]x[/tex], therefore:

[tex]Molar \ solubility=3.12x10^{-5}M[/tex]

Regards.

The molar solubility of Calcium fluoride has been calculated as [tex]3.12\;\times\;10^-^5\;\rm M[/tex].

The dissociation of calcium fluoride has been given by:

[tex]\rm CaF_2\;\rightarrow\;Ca^2^+\;+\;2\;F^-[/tex]

The solubility constant, ksp has been given as:

[tex]ksp=\rm[Mg^2^+]\;[F^-]^2[/tex]

From the dissociation of Calcium nitrate, the concentration of Ca ion in the solution has been 0.01 M.

The dissociation of Calcium fluoride x M has been resulted in x M Ca and 2x M F ions.

The concentration of Ca in the solution has been resulted as x + 0.01 M.

The solubility product can be given as:

[tex]3.9\;\times\;10^-^1^1=[x+0.01]\;[2x]^2\\3.9\;\times\;10^-^1^1=[x+0.01]\;4x^2\\x=3.12\;\times\;10^-^5[/tex]

The molar solubility of Calcium fluoride has been calculated as [tex]3.12\;\times\;10^-^5\;\rm M[/tex].

For more information about molar solubility, refer to the link:

https://brainly.com/question/7141822

Answer:

mol LiCl = 4.83 m

Explanation:

GIven:

Solution of LiCl in water XLiCl = 0.0800

Mol of water in kg = 55.55 mole

Find:

Molality

Computation:

mole fraction = mol LiCl / (mol water + mol LiCl)

0.0800 = mol LiCl / (55.55 mol + mol LiCl)

0.0800 mol LiCl + 4.444 mol = mol LiCl

mol LiCl - 0.0800 mol LiCl = 4.444 mol

0.92 mol LiCl = 4.444 mol

mol LiCl = 4.83 m

Answer:

It will react with water

Explanation:

I know this is an older question, but I just wanted to provide the correct answer.

Since we are dealing with a weak base, and the acid is somewhat stronger, it will react with the water molecules to produce hydronium, which will affect the pH of the solution.

The conjugate base of a weak acid affect pH because it will react with hydronium ion.

A weak acid is an acid that does not dissociate completely in water. On the other hand, a strong acid achieves almost 100% dissociation in water.

Acids dissociate in water to yield the hydronium ion and a conjugate base. For instance, the weak acid, acetic acid is dissociated as follows;

CH3COOH(aq) + H2O(l) ⇄ CH3COO-(aq) + H3O+(aq)

We can see that the conjugate base( CH3COO-) could react with the hydronium ions thereby moving the equilibrium position to the left hand side and affecting the pH by decreasing the hydronium ion concentration.

Learn more: https://brainly.com/question/8592296

Missing parts;

Why will the conjugate base of a weak acid affect pH? Select the correct answer below: O it will react with hydroxide O it will react with water O it will react with hydronium O none of the above

Answer:

[tex]\% m/m= 14.3\%[/tex]

Explanation:

Hello,

In this case, the by mass percent is computed as shown below:

[tex]\% m/m=\frac{m_{solute}}{m_{solute}+m_{solvent}} *100\%[/tex]

Whereas the solute is the sugar and the solvent the water, therefore, the concentration results:

[tex]\% m/m=\frac{63g}{63g+378g} *100\%\\\\\% m/m= 14.3\%[/tex]

Best regards.

Answer:

CHC12

Explanation:

i am not really sure i am onna do a quick research 4 u tho

Answer:

The correct answer is 0.186 V

Explanation:

The two hemirreactions are:

Reduction: Fe²⁺ + 2 e- → Fe(s)  

Oxidation : Co(s)  → Co²⁺ + 2 e-

Thus, we calculate the standard cell potential (Eº) from the difference between the reduction potentials of cobalt and iron, respectively,  as follows:

Eº = Eº(Fe²⁺/Fe(s)) - Eº(Co²⁺/Co(s)) = -0.28 V - (-0.447 V) = 0.167 V

Then, we use the Nernst equation to calculate the cell potential (E) at 298.15 K:

E= Eº - (0.0592 V/n) x log Q

Where:

n: number of electrons that are transferred in the reaction. In this case, n= 2.

Q: ratio between the concentrations of products over reactants, calculated as follows:

[tex]Q = \frac{ [Co^{2+} ]}{[Fe^{2+} ]} = \frac{0.33 M}{1.47 M} = 0.2244[/tex]

Finally, we introduce Eº= 0.167 V, n= 2, Q=0.2244, to obtain E:

E= 0.167 V - (0.0592 V/2) x log (0.2244) = 0.186 V

Answer:

0.8 part of the product is water

Explanation:

Volume (or parts) of water = 4

Volume (or parts) of lemonade = 1

Total volume = 4 + 1 = 5

Fraction of water = Volume of water / Total volume = 4 / 5 = 0.8

Answer:

Higher frequency than visible light -  Ultraviolet light, X-rays, and Gamma rays

Lower frequency than visible light - Infrared radiation, microwaves, and Radio waves

Explanation:

The frequencies of electromagnetic radiations vary according to their wavelengths. The relationship between the frequency and wavelength of the waves is expressed such that:

      λ = c/f, where λ = wavelength, c = speed of light, and f = frequency.

Thus, there is an inverse relationship between the wavelength and the frequency of electromagnetic waves.

The order of the electromagnetic waves based on their frequency from the lowest to the highest is radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma-rays

Hence, electromagnetic waves with higher frequencies than visible light include ultraviolet light, X-rays, and Gamma rays while those with lower frequencies include Infrared radiation, microwaves, and Radio waves.

Answer:

need points

Explanation:

Answer:

-2, -2 and 0.

- Respiration is a process in which energy is produced and photosynthesis is a process in which energy is used.

Explanation:

Hello,

In this case, oxygen is a substance that is used for animals and us to acquire the energy necessary for several functions by the cellular respiration (we also need glucose), besides, it is a product of the photosynthesis carried out by vegetable cells (plants). Moreover, carbon dioxide and water are used by the plants to produce oxygen we need as well as glucose via the aforementioned photosynthesis, thus, both chemical reactions are shown below:

[tex]C_6H_{12}O_6+6O_2\rightarrow 6CO_2+6H_2O\ \ \ respiration\\\\6CO_2+6H_2O\rightarrow C_6H_{12}O_6+6O_2\ \ \ photosynthesis[/tex]

In such a way, since the oxygen in carbon dioxide and water has an oxidation state of -2 (reduced form) we can say that the respiration is a process in which energy is produced and since the oxygen yielded during the photosynthesis has an oxydation state of 0, we can say that photosynthesis is a process in which energy is used.

Best regards.

Answer:

B. 21.07 x 10²³ molecules

Explanation:

Avogadro's Number: 6.022 x 10²³

Step 1: Set up equation

[tex]3.5 mols CO_2(\frac{6.022(10^{23}) moleculesCO_2}{1 mol CO_2})[/tex]

Step 2: Multiply and cancel out units

3.5(6.022 x 10²³) = 21.07 x 10²³ molecules CO₂

Step 3: Convert to proper scientific notation

≈ 2.11 x 10²³ molecules CO₂

Answer:

4.16x10⁻³m

Explanation:

Molality is defined as the ratio between moles of a solute, in this case glucose, and kg of solvent.

As there are 100g of solvent, the kg are 0.1. Thus, we only need to calculate from the mass of glucose its moles to solve the molality of the solution.

Moles glucose:

There are 75mg = 0.075g of glucose. To conver mass to moles it is necessary molar mass.

Molar mass glucose:

6C = 12.01g/mol*6 = 72.06g/mol

12H = 12*1.008g/mol = 12.10g/mol

6O = 6*16g/mol = 96g/mol

72.06 + 12.10 + 96 = 180.16g/mol

Moles of 0.075g of glucose:

0.075g * (1 mol / 180.16g) =

4.16x10⁻⁴ moles of glucose

Molality of the solution:

4.16x10⁻⁴ moles of glucose / 0.1kg of solvent =

The molarity of the solution is 4.16x10⁻³m

We know that the molarity refers to the ratio that arise between the moles of a solute.

Since there are 100 g of solvent so here the kg should be 0.1.

Likewise there is 75 mg so it should be 0.075g

Now the Molar mass glucose should be

6C = 12.01g/mol*6 = 72.06g/mol

12H = 12*1.008g/mol = 12.10g/mol

6O = 6*16g/mol = 96g/mol

So,

= 72.06 + 12.10 + 96

= 180.16g/mol

Now

Moles of 0.075g of glucose:

0.075g * (1 mol / 180.16g) =

4.16x10⁻⁴ moles of glucose

Now finally

Molality of the solution:

= 4.16x10⁻⁴ moles of glucose / 0.1kg of solvent

=4.16x10⁻³m

learn more about molarity here: https://brainly.com/question/13011592

Answer:

hbchbjH j jas a aa  a s ds d as das

Explanation:

electrostatic and ionic are definitely not the answer because they have high melting point

hydrogen bonds are too weak and not permanent.

so the answer is apolar as it is soluble in polar solvents (water)

Answer:

B. Nonpolar

Explanation:

The low melting point tells you the compound is not ionic, metallic, or a network solid.

It is almost certainly a molecular solid.

It does not conduct electricity, so it is not metallic (which we have already ruled out).

It is insoluble in polar solvents (water) and soluble in nonpolar solvents (gasoline).

Since like dissolves like, the molecule is nonpolar.

The type of links must be nonpolar.

Answer:

[ClO] = 3.48×10¯⁹ M.

Explanation:

The following data were obtained from the question:

Equilibrium constant (Kc) = 4.96×10¹¹

Concentration of Cl2O2, [Cl2O2] = 6x10¯⁶ M.

Concentration of ClO, [ClO] =.?

The equation for the reaction is given below:

2ClO(g) ⇌ Cl2O2(g)

The equilibrium constant for a reaction is simply defined as the ratio of the concentration of product raised to their coefficient to the concentration of the reactant raised to their coefficient.

The equilibrium constant, Kc for the reaction is given by:

Kc = [Cl2O2] / [ClO]²

Thus, we can calculate the concentration of ClO, [ClO] as follow:

Kc = [Cl2O2] / [ClO]²

4.96×10¹¹ = 6x10¯⁶ / [ClO]²

Cross multiply

4.96×10¹¹ × [ClO]² = 6x10¯⁶

Divide both side by 4.96×10¹¹

[ClO]² = 6x10¯⁶ / 4.96×10¹¹

[ClO]² = 1.21×10¯¹⁷

Take the square root of both side

[ClO] = √ (1.21×10¯¹⁷)

[ClO] = 3.48×10¯⁹ M

Therefore, the concentration of ClO, [ClO] is 3.48×10¯⁹ M.

Answer:

Following are the answer to this question:

Explanation:

For the reductive amination of its carbonyl group, amino acids could be synthesized by reducing ammunition, which can be synthesized in the given attachment file:

please find the attachment:

Answer:

D) 65.7%

Explanation:

Based on the reaction:

2H2(g)+O2(g)⟶2H2O(l)

2 moles of hydrogen produce 2 moles of water assuming an excess of oxygen.

To find percent yield of the reaction we need to find theoretical yield (The yield assuming all hydrogen reacts producing water). With theoretical yield and actual yield (32.8g H₂O) we can determine percent yield as 100 times the ratio between actual yield and theoretical yield.

Theoretical yield:

Moles of 5.58g H₂:

5.58g H₂ ₓ (1 mol / 2.016g) = 2.768 moles H₂

As 2 moles of H₂ produce 2 moles of H₂O, if all hydrogen reacts will produce 2.768 moles H₂O. In grams:

2.768 moles H₂O ₓ (18.015g / mol) =

49.86g H₂O is theoretical yield

Percent yield:

Percent yield = Actual yield / Theoretical yield ₓ 100

32.8g H₂O / 49.86g ₓ 100 =

65.7% is percent yield of the reaction