Answer:
8.61 %
Explanation:
The percent of sodium hypochlorite in the bleach sample can be calculated using the following formula:
% of sodium hypochlorite = Mass of sodium hypochlorite / mass of sample * 100%We input the data given by the problem:
% of sodium hypochlorite = 2.61 g / 30.3 g * 100 % = 8.61 %1.Using the absorbance of the spinach extract and the equation of the trendline, determine the concentration of the extract solution. Report the concentration in moles/L (M).
2. Calculate the number of rams of chlorophyll-a in the 25ml, spinach solution.
3. Calculate the concentration of the chloropyhll-a soultion in spinach (mg chlorophyll-a/g spinach)
Trendline: y=1609x + .0055
Absorbance spinach extract lamda max: .329
Absorbacne spinach extract, 750 nm: .023
Corrected absorbance: .306
Mass of Spinach: .1876g Total Volume of spinach: 25mL
Answer:
Explanation:
From the given information:
We are to make use of the spinach absorbance extract which is the corrected absorbance (y) = 0.306
And also the trendline equation:
y = 1609x + 0.0055
where,
x = absorbance of the spinach extract.
∴
0.306 = 1609x + 0.0055
collecting the like terms
0.306 - 0.0055 = 1609x
0.3005 = 1609x
x = 0.3005/1609
x = 1.8676 × 10⁻⁴
x ≅ 0.0002 M
No. of grams for the chlorophyll can be computed as follows:
recall that:
molar mass of chlorophyll = 893.5 g/mol
the volume = 25ml = (25/1000) L = 0.025 L
∴
In spinach solution, the no. of grams for the chlorophyll:
= (0.0002) mol/L × (893.5 g/mol) × (0.025) L
= 0.0044675 g
≅ 0.0045 g
In the spinach, the concentration of chlorophyll = no of grams of chlorophyll/ mass of the spinach
= 4.5 mg/0.1876 g
= 23.987 mg/g
≅ 24 mg/g
From the given information:
We are to make use of the spinach absorbance extract which is the corrected absorbance (y) = 0.306ChlorophyllChlorophyll is any member of the class of the green pigments involved in the photosynthesis process.
And also the trendline equation:
y = 1609x + 0.0055
where,
x = absorbance of the spinach extract.
so 0.306 = 1609x + 0.0055
collecting the like terms
0.306 - 0.0055 = 1609x
0.3005 = 1609x
x = 0.3005/1609
x = 1.8676 × 10⁻⁴
x ≅ 0.0002 M
2. No.of grams for the chlorophyll can be computed as follows:
recall that:
molar mass of chlorophyll = 893.5 g/mol
The volume = 25ml = (25/1000) L = 0.025 L
Therefore:
In spinach solution, the no. of grams for the chlorophyll:
= (0.0002) mol/L × (893.5 g/mol) × (0.025) L
= 0.0044675 g
≅ 0.0045 g
3. In the spinach, the concentration of chlorophyll = no of grams of chlorophyll/ mass of the spinach
= 4.5 mg/0.1876 g
= 23.987 mg/g
≅ 24 mg/g
Read more about chlorophyll here:
https://brainly.com/question/3529377
calculate the molarity in a 0.550 m solution of NaCl in water. Assume that the solution density is 1.03g/mol
Answer:
M=0.549M
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to perform this calculation by firstly assuming we have 1 kg of water as the solvent so that we have 0.550 moles of NaCl as well. Moreover, we realize we have 1000 grams of water and the correct mass of the solution can be calculated by converting 0.550 moles of NaCl to grams by using its molar mass:
[tex]m_{solute}=0.550mol*\frac{58.44 g}{1mol}= 32.14g\\\\m_{solution}=1000g+32.14g=1032.14g[/tex]
And subsequently, the volume in liters by using the density and the correct conversion factor:
[tex]V_{solution}=1032.14g*\frac{1mL}{1.03g} *\frac{1L}{1000mL} =1.002L[/tex]
Finally, the molarity will be:
[tex]M=\frac{0.550mol}{1.002L} =0.549M[/tex]
Regards!
Calculate the mass of Na2S needed if a solution containing 2g of Hg(NO3)2 was added to Na2S solution.
( Hg= 200.59, N= 14, O= 16, Na= 23, S=32)
Answer:
1.433g of HgS are produced
Explanation:
A Solution Containing 2.0 Grams Of Hg(NO3)2 Was Added To A Solution Containing 2.0 Grams Of Na2S. Calculate the mass of the HgS that was formed (it is a precipitate) according to this reaction:
Based on the reaction:
Na2S + Hg(NO3)2 → HgS + 2NaNO3
To solve this question we need to find the moles of each reactant in order to find the limiting reactant. The moles of limiting reactant = moles of HgS:
Moles Na2S -Molar mass: 78.0452 g/mol-
2.0g * (1mol / 78.0452g) = 0.0256 moles Na2S
Moles Hg(NO3)2 -324.7g/mol-
2.0g * (1mol / 324.7g) = 0.006159 moles Hg(NO3)2
As the reaction is 1:1, and moles of Hg(NO3)2 < moles Na2S
The moles of Hg(NO3)2 = Moles HgS = 0.006159 moles
The mass is:
Mass HgS -Molar mass: 232.66g/mol-:
0.006159 moles * (232.66g/mol) =
1.433g of HgS are produced
8.7 Two products are formed in the following reaction in a 50:50 mixture. Would the resulting solution be optically active
Answer:
Yes. The solution would be optically active.
Explanation:
Diastereomer are defined as the image that is non mirror and non -identical. It is made up of two stereoisomers. They are formed when the two stereoisomers or more than two stereoisomers of the compound have the same configuration at the equivalent stereocenters.
In the given context, as the product given is a diastereomeric mixture, the product would have an optical activity in total.
So the answer is Yes.
define saturated and unsaturated fats
Answer:
unsaturated fats, which are liquid at room temperature,are different from saturated fat because they contain one or more double bonds and fewer hydrogen atoms on their carbon chain.
Typhoon signals rise due to what? wind speed or wind strength or both?
Which equation expresses the solubility product of Zn3(PO4)2?
a. Ksp = [Zn2+][PO43]
b. Ksp = [Zn2+]3 [PO43]2
c. Ksp = 6[Zn2+][PO43]2
d. Ksp = 108[Zn2+][PO43]2
⇒b. Ksp = [Zn2+]3 [PO43]2
Hope It Helps You ✌️
define a fluid very sort answer
Answer:
A fluid is a medium that has a defined mass and volume, but no fixed shape, at a constant temperature and pressure. This may include gases, liquids, plasmas, and to some extent plastic solids. A fluid can flow and deform, preventing it from carrying loads in a static equilibrium. A fluid is always compressible and internal frictional forces always occur due to the viscosity of the fluid.
What should be done if a spectrophotometer reports an absorbance that is too high? Select one: Reposition the cuvette in the spectrophotometer. Pour out half the volume of the sample. Restart the spectrophotometer and try again. Dilute the sample. g
Answer:
The sample should be diluted
Explanation:
According to Beer Lambert's law, the absorbance of a sample depends on the concentration of the sample.
Hence, if the concentration of the sample is very high, the spectrophotometer will also report a very high value of absorbance.
When this is the case, the sample should simply be diluted and the readings are taken again using the spectrophotometer.
Organic foods do not contain chemicals.
True
Or
False
Answer:
True
Explanation:
The word Organic refers to the methods used to cultivate and process farm agricultural products. Organic foods are edible and nutritious substances consumed (both plants and animals) that are free from the use of synthetics and chemicals. In plants, the include the use of organic manure that serves as fertilizers and carrying out the weeding process by hand weeding. In animals, diseases can be prevented by maintaining a clean house or rotational grazing.
The benefit of organic foods are to produce food substances with no chemical substances.
show in chemistry the fermentation of carbohydrate to form alcohol
hope it helps to everyone
A chemist fills a reaction vessel with 9.47 atm nitrogen monoxide (NO) gas, 2.61 atm chlorine (C12) gas, and 8.64 atm nitrosyl chloride (NOCI) gas at a temperature of 25.0°C. Under these conditions, calculate the reaction free energy AG for the following chemical reaction:
2NO(g) + Cl2(g) = 2NOCI (g)
Use the thermodynamic information in the ALEKS Data tab. Round your answer to the nearest kilojoule.
Answer: The Gibbs free energy change of the reaction is 2.832 kJ.
Explanation:
The relationship between Gibbs free energy change and reaction quotient of the reaction is:
[tex]\Delta G^o=-RT\ln Q_p[/tex]
where,
[tex]\Delta G^o[/tex] = Gibbs free energy change
R = Gas constant = 8.314 J/mol.K
T = temperature = [tex]25^oC=298K[/tex]
[tex]Q_p[/tex] = reaction quotient = [tex]\frac{p_{NOCl}^2}{(p_{NO}^2)\times (p_{Cl_2})}[/tex]
We are given:
[tex]p_{NOCl}=8.64atm\\p_{NO}=9.47atm\\p_{Cl_2}=2.61atm[/tex]
Putting values in above equation, we get:
[tex]\Delta G^o=-(8.314)\times 298K\times \ln (\frac{(8.64)^2}{(9.47)^2\times (2.61)})\\\\\Delta G^o=-8.314\times 298\times (-1.143)[/tex]
[tex]\Delta G^o=2831.86J=2.832kJ[/tex] (Conversion factor: 1 kJ = 1000 J)
Hence, the Gibbs free energy change of the reaction is 2.832 kJ.
name this organic compound
I don't need explaination just give the name
Answer:
Toluene
Explanation:
This compound is called toluene.
It is a phenyl group where it is bonded a methyl.
It is an aromatic compound.
IUPAC name can be, Methylbenzene.
As an organic compound it can not be dissolved in water.
This can be a reaction of synthesis:
C₆H₅H + CH₃Cl → C₆H₅CH₃ + HCl
a. Draw 2,3-dichloro octane.
b. Write the lewis structure for H20 molecule.
Answer:
a.draw 2,3 dicholoro octane
Explanation:
mag isip ka kung paano hehe
Why the catalytic and optical properties of nanomaterial are different from bulk material
Answer:
The material properties of nanostructures are different from the bulk due to the high surface area over volume ratio and possible appearance of quantum effects at the nanoscale. ... Yu; they found that the structural distortions on the quantum dots depend both on the kind of dopant and on the size of the dots.
Explanation:
hope it helps
Give the following reaction: ammonium nitrate—> dinitrogen monoxide + water.
a.) Write a complete balanced chemical equation.
b.) Calculate the number of molecules of water produced by 11.2g of ammonium nitrate
Answer:
a) NH₄NO₃ ⇒ N₂O + 2 H₂O
b) 1.69 × 10²³ molecules
Explanation:
Step 1: Write the balanced equation
NH₄NO₃ ⇒ N₂O + 2 H₂O
Step 2: Convert 11.2 g of NH₄NO₃ to moles
The molar mass of NH₄NO₃ is 80.04 g/mol.
11.2 g × 1 mol/80.04 g = 0.140 mol
Step 3: Calculate the moles of H₂O produced
0.140 mol NH₄NO₃ × 2 mol H₂O/1 mol NH₄NO₃ = 0.280 mol H₂O
Step 4: Calculate the number of molecules in 0.280 moles of water
We will use Avogadro's number.
0.280 mol × 6.02 × 10²³ molecules/1 mol = 1.69 × 10²³ molecules
Ammonia is produced by the reaction of nitrogen and hydrogen: N2(g) + H2(g) NH3(g)
(a) Balance the chemical equation.
(b) Calculate the mass of ammonia produced when 35.0g of nitrogen reacts with hydrogen.
Answer:
a) N2 (g) + H2 = 2 NH3
b) You have to state the mass of hydrogen
Please can someone please help me !!
Answer:
False
Explanation:
The element least likely to obey the octet rule in forming chemical bonds is Group of answer choices oxygen. carbon. nitrogen. neon. fluorine.
Answer:
neon
Explanation:
The octet rule states that atoms of elements are stable when they possess 8 electrons on their outermost shell.
Hence, atoms of elements participate in chemical reactions in order to attain this octet structure (eight electrons in the outermost shell).
Neon is a noble gas and already has eight electrons in its outermost shell. Hence, neon is least likely to obey the octet rule.
1. Calculate the number of moles of aluminum, sulfur, and oxygen atoms in 8.00 moles of aluminum sulfate, Al2(SO4)3. 2. Calculate the number of moles of magnesium, chlorine, and oxygen atoms in 6.10 moles of magnesium perchlorate, (Mg(CIO4)2.3. A sample of propane, C3H8, contains 13.8 moles of carbon atoms. How many total moles of atoms does the sample contain?4. A rare gold coin (24 karat, or 100% gold) has a mass of 25.54 g. How many atoms of gold are present in this coin?
Answer:
1) 16.0 moles Al
24.0 moles S
96.0 moles O
2)In 6.10 moles magnesium perchlorate, (Mg(CIO4)2 we have:
6.10 moles Mg
12.2 moles Cl
48.8 moles O
3)4.6 moles of propane (total) contains 13.8 moles of carbon and 36.8 moles of hydrogen atoms
4)The gold coin contains 7.8 *10^22 atoms
Explanation:
Step 1: Data given
Number of moles of aluminum sulfate, Al2(SO4)3 = 8.00 moles
Step 2: Calculate the number of moles
In 1 mol of aluminum sulfate, Al2(SO4)3 we have:
2 moles of Al
3 moles of S
12 moles of O
This means that in 8.00 moles of aluminum sulfate, Al2(SO4)3 we have:
2*8.00 = 16.0 moles Al
3*8.00 = 24.0 moles S
12*8 = 96.0 moles O
2. Calculate the number of moles of magnesium, chlorine, and oxygen atoms in 6.10 moles of magnesium perchlorate, (Mg(CIO4)2
1 mol of magnesium perchlorate, (Mg(CIO4)2 has:
1 Mol of Mg
2 moles of Cl
8 moles of O
In 6.10 moles magnesium perchlorate, (Mg(CIO4)2 we have:
1 * 6.10 moles = 6.10 moles Mg
2*6.10 = 12.2 moles Cl
8*6.10 = 48.8 moles O
3. A sample of propane, C3H8, contains 13.8 moles of carbon atoms. How many total moles of atoms does the sample contain?
In 1 mol of propane, C3H8 we have:
3 moles of C and 8 moles of H
This means if we have 13.8 moles of carbon, we have 13.8/3 = 4.6 moles of propane, C3H8 and 4.6 *8 = 36.8 moles of H
So 4.6 moles of propane contains 13.8 moles of carbon and 36.8 moles of hydrogen atoms
4. A rare gold coin (24 karat, or 100% gold) has a mass of 25.54 g. How many atoms of gold are present in this coin?
Calculate moles of gold:
Moles = mass of gold / molar mass gold
Moles = 25.54 grams / 196.97 g/mol
Moles = 0.1297 moles
Calculate atoms:
Number of atoms = moles * number of Avogadro
0.1297 * 6.022 *10^23 = 7.8 *10^22 atoms
The gold coin contains 7.8 *10^22 atoms
What does Gibbs free energy predict?
A. It predicts what the rate of the reaction will be.
B. It predicts how high the activation energy is.
C. It predicts if entropy will increase or decrease.
D. It predicts whether or not a reaction will be spontaneous.
Answer:
It predicts whether or not a reaction will be spontaneous.
Explanation:
The equation;
∆G= ∆H - T∆S enables us to obtain the Gibbs free energy of a chemical process.
The Gibbs free energy value tells us whether a chemical process will be spontaneous or not.
When;
∆G>0 the reaction is not spontaneous
∆G=0 the reaction is at equilibrium
∆G<0 the reaction is spontaneous
"All plants perform photosynthesis. The cactus on my windowsill is a plant, therefore it must be performing photosynthesis." This statement is an example of:
Group of answer choices
Deductive Reasoning
Logical Fallacy
Inductive Reasoning
Bias
Answer:
Deductive reasoning
The speed limit on parts of the German autobahn was once set at 286 kilometers per hour (km/h). Calculate the speed limit in miles per hour (mph).
Answer: 178mph
Explanation:
From the question given, we are informed that the speed limit on parts of the German autobahn was once set at 286 kilometers per hour (km/h). Based on the information, the speed limit in miles per hour will then be:
= 286km/h × 1000m/1km × 1mi/1609m
= 178miles per hour
Therefore, the speed limit is 178mph.
Inbox
Question 1
Flagged
III
Initial Knowledge Check
Drafts
Sent
Write the symbol for every chemical element that has atomic number less than 14 and atomic mass greater than 23.2 u.
Answer:
8 oxygen. 9 flourine. 10. Neon. 5 Boron
jawbone root nerve cementum blood vessel gum crown Fill in the blanks. 1. The front four teeth on each jaw are called 2. Each tooth is attached to the jawbone with the help of 3. A healthy tooth is held firmly in the jawbone by the 4. Teeth can get spoilt if they are not kept 5. Germs in the mouth feed on sugar and make
Answer:
shduxhheufufffhduduf
Draw bond-line formulas of all monochloro derivatives that might be formed when 1,1-dimethylcyclobutane is allowed to react with Cl2 under UV irradiation. For each structure, indicate, with an asterisk, any stereocenters that might be present.
Answer:
Attached below
Explanation:
Diagram of Bond-line formulas of all monochloro derivatives formed when 1,1-dimethylcyclobutane is allowed to react with c12 under UV
attached below
D
Question 2
1 pts
How many moles of carbon tetrachloride are present in
18.Og of CC14?
i think .117018
now to get to the 20charaeactrs minimum.
Many home barbeques are fueled with propane gas (C3H8)(C3H8). Part A What mass of carbon dioxide is produced upon the complete combustion of 27.9 LL of propane (the approximate contents of one 5-gallon tank)
Answer:
41264 g of CO₂
Explanation:
Combustion reaction is:
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
1 mol of propane react to 5 moles of oxygen in order to proudce 3 moles of carbon dioxide and 4 moles of water.
In a combustion reaction, our reactant reacts to oxygen and the products are always CO₂ and water.
We have the volume of propane but we need moles of it, so we need to apply density.
Density = mass / volume so mass = density . volume.
Density of propane is: 493 g/L
Mass of propane is 493 g/L . 27.9L = 13754.7 g
We convert mass to moles: 13754.7 g . 1 mol/ 44g = 312.6 moles
According to reaction, 1 mol of propane can produce 3 moles of CO₂
Our 312.6 moles will produce 312.6 . 3 = 937.8 moles
We convert moles to mass: 937.8 mol . 44 g/mol = 41264 g
I have an unknown volume of gas at a pressure of 0.50 atm and a temperature of 325 K. If I raise the pressure to 1.2 atm, decrease the temperature to 320 K, and measure the final volume to be 48 liters, what was the initial volume of the gas?
SHOW YOUR WORK
Answer:
the answer is 2.1 atm
Explanation:
the way people normally do it is by simply deciding the 325k with the 1.2
1. Which of the combinations in the lab activity had indications that a chemical change occured? Defend your argument with evidence.
2. Which of the combinations in the lab activity had indications that a physical change occured? Defend your argument with evidence.
3. Are all physical changes reversible? Explain your answer using an example you've observed in your everyday life.
4. Give an example of something you've observed in your everyday life that is a chemical reaction. How did you know it was a chemical reaction?
Answer:The green growing on the penny of copper and the rust forming on the nail of iron are chemical changes. Boiling away salt water, scraping iron filings from a mixture of sand with a magnet, and breaking a rock with a hammer, are physical changes.
Explanation:
