sự sắp xếp nguyên tử trong vật chất

Answer:

C. By super-cooling certain types of plasma.

Explanation:

Bose-Einstein condensate is a state of matter whereby atoms or particles become cooled to a very low energy state leading to their condensation to give a single quantum state.

Note that plasma refers to atoms that have had some or even all of its electrons stripped away leaving only positively charged ions. Simply put, plasma is ionized matter.

When certain types of plasma are super cooled, Bose-Einstein condensate are formed.

Answer:

irreversible.

I hope this will help you

Answer:

See explanation

Explanation:

The relationship between the activation energy and rate of reaction is best captured by the Arrhenius equation;

k= Ae^-Ea/RT

Where;

k= rate constant

A= pre-exponential factor

Ea=activation energy

R= gas constant

T= temperature

We can see from the foregoing that, as the activation energy increases, the rate of reaction decreases and vice versa. reactions that have a very high activation energy are markedly slow.

Since the activation energy for the malonic acid reaction is found to be greater than the activation energy for the tartaric acid reaction, then the rate of the malonic acid reaction(k) will be slower than that of the tartaric acid reaction.

The study of chemistry and bonds is called chemistry. There are two types of elements metal and nonmetals.

The correct answer is mentioned below.

The equation is as follows:-

[tex]k= Ae^{-Ea/RT[/tex] Where;

We can see from the foregoing that, as the activation energy increases, the rate of reaction decreases and vice versa. reactions that have very high activation energy are markedly slow. Since the activation energy for the malonic acid reaction is found to be greater than the activation energy for the tartaric acid reaction, then the rate of the malonic acid reaction(k) will be slower than that of the tartaric acid reaction.

Hence, the correct answer is mentioned above.

For more information about the equation, refer to the link:-

https://brainly.com/question/1388366

Answer:

Explanation:

CCl4 => C + 2Cl2

Answer:

a. 2..86 b. 4.86 c. 10.7 d. 8.7

Explanation:

a. Determine a pH at which 50% of ClCH2COOH will be in a form that possesses a charge.

Using the Henderson-Hasselbalch equation,

pH = pKa + log[A⁻]/[HA]

where [A⁻] = concentration of conjugate base (or charged form) and [HA] = concentration of acid.

At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1

So, pH = pKa + log[A⁻]/[HA]

pH = pKa + log1

pH = pKa = 2.86

b. Determine a pH at which pH more than 99% of ClCH2COOH will be in a form that possesses a charge.

Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.99x while the acidic concentration is remaining 1 % (1 - 0.99)x = 0.01x

Using the Henderson-Hasselbalch equation,

pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base (or charged form) = 0.99x and [HA] = concentration of acid = 0.01x.

pH = pKa + log0.99x/0.01x

pH = pKa + log0.99/0.01

pH = 2.86 + log99

pH = 2.86 + 1.996

pH = 4.856

pH ≅ 4.86

c. Determine a pH at which 50% of CH3CH2NH+3 will be in a form that possesses a charge.

Using the Henderson-Hasselbalch equation,

pH = pKa + log[A⁻]/[HA]

where [A⁻] = concentration of conjugate base and [HA] = concentration of acid.

At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1

So, pH = pKa + log[A⁻]/[HA]

pH = pKa + log1

pH = pKa = 10.7

d. Determine a pH at which pH more than 99% of CH3CH2NH+3 will be in a form that possesses a charge.

Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.01x while the acidic concentration is remaining 99 % (1 - 0.01)x = 0.99x (which possesses the charge).

Using the Henderson-Hasselbalch equation,

pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base = 0.01x and [HA] = concentration of acid = 0.99x.

pH = pKa + log0.01x/0.99x

pH = pKa + log1/99

pH = 10.7 - log99

pH = 10.7 - 1.996

pH = 8.704

pH ≅ 8.7

Answer:

I do not speak Spanish.

Explanation:

Explanation:

since there are no lone pairs on the central atom, the shape will be tetrahedral

Answer:

density of second liquid = 650 kg/m³

Explanation:

Given that:

The volume of the plastic block submerged inside the water  = 0.5 V

The force on the plastic block  = [tex]\rho_1V_1g[/tex]

[tex]= 0.5p_1 V_g[/tex]

when the block is floating, the weight supporting the force (buoyancy force) is:

W [tex]= 0.5p_1 V_g[/tex]

[tex]\rho Vg = 0.5p_1 V_g[/tex]

[tex]\rho = 0.5 \rho _1[/tex]

where;

water density [tex]\rho _1[/tex] = 1000

[tex]\rho = 0.5 (1000)[/tex]

[tex]\rho = 500 kg/m^3[/tex]

In the second liquid, the volume of plastic block in the water = (100-23)%

= 77% = 0.7 V

The force on the plastic block is:

[tex]= 0.77p_2 V_g[/tex]

when the block is floating, the weight supporting the force (buoyancy force) is:

[tex]W = 0.77p_2 V_g[/tex]

[tex]\rho Vg = 0.77 \rho_2 V_g \\ \\ \rho = 0.77 \rho_2 \\ \\ 500 = 0.77 \rho_2 \\ \\ \rho_2 = 500/0.77[/tex]

[tex]\mathbf{ \rho_2 \simeq 650 \ kg/m^3}[/tex]

Answer:

D. -80m/s^2

Explanation:

V = u + at

5 = 65 + a (0.75)

0.75a = -60

a = -60/0.75

a = -80m/s^2

Therefore, is decelerating at 80m/s^2

Answer:

[tex]\boxed {\boxed {\sf D. \ 80 \ m/s^2 \ down}}[/tex]

Explanation:

We are asked to find the acceleration of a skydiver. Acceleration is the change in velocity over the change in time, so the formula for calculating acceleration is:

[tex]a= \frac{v_f-v_i}{t}[/tex]

The skydiver was initially traveling 65 meters per second, then he slowed down to a final velocity of 5 meters per second. He slowed down in 0.75 seconds.

[tex]\bullet \ v_f = 5 \ m/s \\\bullet \ v_i= 65 \ m/s \\\bullet \ t= 0.75 \ s[/tex]

Substitute the values into the formula.

[tex]a= \frac{ 5 \ m/s - 65 \ m/s}{0.75 \ s}[/tex]

Solve the numerator.

[tex]a= \frac{-60 \ m/s}{0.75 \ s}[/tex]

Divide.

[tex]a= -80 \ m/s^2[/tex]

The acceleration of the skydiver is -80 meters per second squared or 80 meters per second squared down. The skydiver is slowing down or decelerating, so the acceleration is negative or down.

Answer:

the energy released is to make steam to create electricity. yes you are right i just didnt feel like being super technical

In a nuclear reaction, the  direct function of the energy released from the nuclear chain reaction in a nuclear power plant is turning the blades of the turbine heating water to produce steam .

There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.

In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.

In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.

Learn more about nuclear reactions,here:

https://brainly.com/question/12786977

#SPJ7

Answer:

a. True

Explanation:

There is strong inhibition of Carbon Anhydrase by Aceta-zolamide Carbonic Anhydrase. The drug acetazolamide is used as diuretic which increase the urine production in human body. It lowers pressure in eye in glaucoma.

Answer:

no

Explanation:

Fluoride is not nucleophilic (having the tendency to donate electrons) enough to allow for the use of HF to cleave ethers in protic media(protic solvents are polar liquid compounds that have dissociable hydrogen atoms). The rate of reaction is comparably low, so that heating of the reaction mixture is required.

Answer:

1.27 × 10⁵ L

Explanation:

Step 1: Given data

Step 2: Convert the temperatures to the Kelvin scale

We will use the following expression.

K = °C + 273.15

K = 21 °C + 273.15 = 294 K

K = -48 °C + 273.15 = 225 K

Step 3: Calculate the final volume of the balloon

We will use the combined gas law.

P₁ × V₁ / T₁ = P₂ × V₂ / T₂

V₂ = P₁ × V₁ × T₂/ T₁ × P₂

V₂ = 745 Torr × 1.41 × 10⁴ L × 225 K/ 294 K × 63.1 Torr

V₂ = 1.27 × 10⁵ L

Answer:

Al + MnO4- + 2H2O → Al(OH)4- + MnO2

Explanation:

First of all, we out down the skeleton equation;

Al + MnO4- → MnO2 + Al(OH)4-

Secondly, we write the oxidation and reduction equation in basic medium;

Oxidation half equation:Al + 4H2O + 4OH- → Al(OH)4- + 4H2O + 3e-

Reduction half equation:MnO4- + 4H2O + 3e- → MnO2 + 2H2O + 4OH-

Thirdly, we add the two half reactions together to obtain:

Al + MnO4- + 8H2O + 4OH- + 3e- → Al(OH)4- + MnO2 + 6H2O + 3e- + 4OH-

Lastly, cancel out species that occur on both sides of the reaction equation;

Al + MnO4- + 8H2O→ Al(OH)4- + MnO2 + 6H2O

The simplified equation now becomes;

Al + MnO4- + 2H2O → Al(OH)4- + MnO2

Answer:

Answer:

2

Explanation:

Lead(|V) fluoride

Ammonium Nitrate

Lithium sulfide

For the rules, I don't know what you were taught. I just do it intuitively since I have done so much chemistry.

The first one the roman numerals represents the charge of the lead which much match the 4- charge from the 4 fluorides.

The second one is just two polyatomic ions which you just have to remember.

The last one is the typical ionic compound naming technique i guess.

Answer:

1860g.

Explanation:

It is known that the molar mass of C2H6O2 is 62.08 g/mol.,

Now to  solve for the number of moles of solute, one must multiply both

sides by the volume:

moles of solute = (6.00 M)(5.00 L) = 30.0 mol

Notice since the definition of molarity is mol/L, the

product M × L gives mol, a unit of amount.

Use the molar  mass of C3H8O3, one can convert mol to g:

Mass m =30 mol × 62.08 g/mol

m = 1860g.

Hence, there are 1,860 g of C2H6O2 in the specified amount of

engine coolant.

Answer: Chemicals like acids and bases are harmful and must be neutralized before draining.

Explanation:

A strong acid or strong base is required to be diluted or neutralized before it is discarded in the drain as if is discarded without diluting and neutralization it can spill and splash from sink or drain and can harm people in chemistry lab, moreover the fumes of the discarded chemical on spilling can cause respiratory tract burning and can even cause fire hazard so it must be converted into less harmful form and then must be drained.  

Answer:

pH= 1.9 then [tex]H_{3} PO_{4}[/tex]

pH = 5.0 , [tex]CH_{3} COOH[/tex]

pH = 3.9 , HCOOH

As we know range left [tex]pH= pKa+/- 1[/tex]

Answer:

Mass=Moles × RFM

Mass= 0.28M× 164

Mass= 45.92 grammes

Answer:

the composition of the ∝ phase C∝ = 14  or [ 14 wt% B-86 wt% A ]

Explanation:

Given the data in the question;

Co = 53 or [ 53 wt% B-47 wt% A ]

W∝ = 0.5 = Wβ

Cβ = 92 or [ 92 wt% B-8 wt% A ]

Now, lets set up the Lever rule for W∝ as follows;

W∝ = [ Cβ - Co ] / [ Cβ - C∝ ]

so we substitute our given values into the expression;

0.5 = [ 92 - 53 ] / [ 92 - C∝ ]

0.5 = 39 /  [ 92 - C∝ ]

0.5[ 92 - C∝ ] = 39

46 - 0.5C∝  = 39

0.5C∝ = 46 - 39

0.5C∝ = 7

C∝ = 7 / 0.5

C∝ = 14  or [ 14 wt% B-86 wt% A ]

Therefore, the composition of the ∝ phase C∝ = 14  or [ 14 wt% B-86 wt% A ]

In the original solution you have the mixture of a weak acid (Hypochlorous acid) and its conjugate base (Sodium hypochlorite). That is a buffer.

The barium hydroxide will react with hypochlorous acid. If this reaction cause the complete reaction of hypochlorous acid, the buffer break its capacity and the pH change in several units. In this case:

The addition of barium hydroxide will raise the pH slightly because the buffer still working.

The initial moles of those species are:

Hypochlorous acid:

[tex]1L * \frac{0.370mol}{1L} = 0.370 moles[/tex]

Sodium hypochlorite:

[tex]1L * \frac{0.493mol}{1L} = 0.493 moles[/tex]

Now, a strong acid as barium hydroxide (Ba(OH)₂) reacts with a weak acid as hypochlorous acid (HClO) as follows:

Ba(OH)₂ + 2HClO → Ba(ClO)₂ + 2H₂O

For a complete reaction of 0.092 moles of barium hydroxide are required:

[tex]0.092 moles Ba(OH)_2*\frac{2mol HClO}{1molBa(OH)_2} = 0.184 moles HClO[/tex]

As there are 0.370 moles, the moles of HClO after the reaction are:

0.370 moles - 0.184 moles = 0.186 moles of HClO will remain

As you still have hypochlorite and hypochlorous acid you still have a buffer.

Thus, the pH will raise slightly because the amount of acid is decreasing and slightly because the buffer can keep the pH.

Learn more about buffers in:

https://brainly.com/question/24302294

Explanation:

The structures of both acetone and propanal are shown below:

In the formula of propanal there is -CHO functional group at the end.

In acetone -CO- group is present in the middle that is on the second carbon.

The molecular formula is C3H6O.

Both have same molecular formula but different structural formulas.

Answer:

a. Decrease

b. Increase

c. Increase

d. No effect

Explanation:

Glycolysis is present in muscle cells which converts glucose to pyruvate, water and NADH. It produces two molecules of ATP. Cellular respiration produces more molecules of ATP from pyruvate in mitochondria. Glycolysis increases in pyruvate kinase.

a. Loss of binding site for fructose 1,6-bisphosphate in pyruvate kinase: Decrease

b. Loss of allosteric binding site for ATP in pyruvate kinase: No effect

c. Loss of allosteric binding site for AMP in phosphofructokinase: Increase

d. Loss of regulatory binding site for ATP in phosphofructokinase: Increase

A. An important substrate in the glycolysis pathway is fructose 1,6-bisphosphate. It stimulates pyruvate kinase, an essential enzyme in glycolysis. The amount of pyruvate kinase that is activated will decrease if the fructose 1,6-bisphosphate binding site in pyruvate kinase is eliminated. As a result the rate of glycolysis in the muscle cells will probably decrease.

B. The allosteric ATP binding site of pyruvate kinase controls how active the enzyme is. However, pyruvate kinase is not significantly regulated by ATP in muscle cells. Therefore, it is unlikely that deletion of the ATP-binding allosteric site in pyruvate kinase would have no effect on the rate of glycolysis in muscle cells.

C. The rate-limiting enzyme in glycolysis, phosphofructokinase, is activated from all forms by AMP. It increases the rate of glycolysis by stimulating the activity of phosphofructokinase. If the allosteric binding site for AMP is eliminated, phosphofructokinase activation will be reduced. As a result, the rate of glycolysis in muscle cells will decrease.

D. Phosphofructokinase is inhibited allosterically by ATP. It regulates the rate of glycolysis by a feedback mechanism. High ATP concentrations cause phosphofructokinase to bind to its regulatory site, limiting its activity and delaying glycolysis. If the regulatory binding site for ATP is eliminated, the inhibitory action of ATP on phosphofructokinase would be lost. As a result, muscle cells will glycolysis at a faster rate.

Learn more about glycolysis, here:

https://brainly.com/question/26990754

#SPJ6

Answer:

41 g

Explanation:

The equation of the reaction is;

Cr(NO3)3(aq)+Na3PO4(aq)=3NaNO3(s)+CrPO4(aq)

Number of moles of chromium nitrate = 37g/ 146.97 g/mol = 0.25 moles

1 mole of sodium phosphate reacts with 1 mole of chromium nitrate

x moles of sodium phosphate react as with 0.25 moles of chromium nitrate

x= 1 × 0.25/1

x= 0.25 moles

Mass of sodium phosphate = 0.25 moles × 163.94 g/mol

Mass of sodium phosphate = 41 g

Explanation:

the carbon would be sp3 hybridized, and it doesn't matter which carbon, since either of them have a full octet

b) (√)

c)(✓)

hsjdhfjdkskkshd

[tex]\boxed{\large{\bold{\blue{ANSWER~:) }}}}[/tex]

Explanation:

TRUE

Explanation:

*not sure about this answer