Answer:
A. Chemical ChangeExplanation:
When starches and sugars are being broken down during energy production it represents chemical change.[tex]\tt{ \green{P} \orange{s} \red{y} \blue{x} \pink{c} \purple{h} \green{i} e}[/tex]
Find the density of mercury if 205 mL has a mass of 2790 g; round
your answer to the nearest 0.1 g/mL.
Answer:
D= m/ V
D = density of mercury , m= mass , V= Volume
D = 2790 / 205
D = 13.6 g/ml
D = 1.36 ×10-¹ g/ml
I hope I helped you^_^
Plzzzzzz help me Write electronic configuratof sodium and chlorine in the term of subshell ?
Answer:
ans:Ne=2,8,1
ans:2,8,7
Which element would most likely lose electrons to form positive ions when bonding with other elements?
rubidium (Rb)
gallium (Ga)
argon (Ar)
iodine (I)
The correct answer to the question is Rubidium (Rb)
Rubidium (Rb) is a group 1 element and as such, it can form bond by losing it's valence electron (i.e 1 electron) easily.
Gallium (Ga) is a group 13 element. It can only form bond by losing it's 3 valence electrons.
Argon is a group 18 element. This group has completely filled outermost shell and are very stable. They do not involve in bond formation.
Iodine (I) is a group 17 element. It is more difficult for this group to lose its 7 valence electrons hence, they form bond by accepting 1 electron.
With the above information, we can conclude that Rubidium will most likely lose electron to form bond.
Learn more: https://brainly.com/question/13178080
Answer:
(Question 1)Which element would most likely lose electrons to form positive ions when bonding with other elements?
(Answer) rubidium (Rb)
(Question 2) Which statement about sodium chloride is correct?
(Answer) The sodium atom transfers electrons to the chlorine atoms to form ionic bonds.
(Question 3) Based on their locations in the periodic table, which two elements are most likely to form covalent bonds with each other?
(Answer) nitrogen (N) and oxygen (O)
(Question 4) Which phrase best describes electronegativity?
(Answer) the relative strength with which an element attracts electrons in a chemical bond
(Question 5) Based on the information in the table, which pair of elements would likely form the least polar bonds with each other?
(Answer) bromine and nitrogen
Explanation:
just finished the quick check enjoy UwU
please answer quick...................
Answer:
3). C
Explanation:
When inter-nuclear distance [ atomic radius ] is smaller, the nuclear attraction has a greater magnitude.
[tex].[/tex]
pls
answer
pls
pls
its ma homework
Answer:
2 ka A. nitrogen, oxygen, Carbon dioxide
Answer:
no 1 Ans gas
hope it works
My friend asked, Our sale is being used to measure
flour. What was the scale really measuring about
the flour?
A) color of flour
B) volume of flour
C) weight of flour
D) temperature of flour
surely help:) I’ll brainlist!
Answer:
A. The product formed have more energy than the reactants.
This is because it is an endothermic reaction.
[tex].[/tex]
who started water conservation in himachal pradesh
Explanation:
There are government khatris as well, which are maintained by the panchayat. Kuhls are a traditional irrigation system in Himachal Pradesh- surface channels diverting water from natural flowing streams (khuds). A typical community kuhl services six to 30 farmers, irrigating an area of about 20 ha.
How can you determine the number of shells in an atom of a certain element, based
on the element's position on the periodic table?
Answer: At some point in your chemistry education, you may have been introduced to the song “The Elements in which Tom Lehrer does a rapid
fire musical rendition of all the elements' names. Like me, you may even have been offered the opportunity to memorize this song for extra credit. If so, it’s possible that you still remember the names of all the elements, which is an impressive feat—not to mention a fun trick to pull out at parties.
Explanation:
A pan containing 20.0 grams of water was allowed to cool from a temperature of 95.0 °C. If the amount of heat released is 1,200 joules, what is the approximate final temperature of the water?
75 °C
78 °C
81 °C
87 °C
Answer:
81 °C
Explanation:
This is a calorimetry question so a few things you will need for this. The calorimetry equation q=mcΔT & the specific heat of water (4.2J/g•°C). Other definitions are:
q = heat added/released by a sample
m = mass of sample
c=specific heat of sample
ΔT = change in temperature
from here we can rearrange the equation to state:
q/(mc) = ΔT
1200J/((20.0g)(4.2J/g•°C)) = ΔT
14°C = ΔT
If the starting temperature was 95.0°C and we know that the temperature was cooled by 14°C then the final temperature of the water would be 81.
Answer:
C. 81 c
Explanation:
took the test :)
Help me,I’m so confused ..and explain pls
Answer:
1. is 50...
75/1.5 = 50
2. is 600...
300/5 is 600
3.
Part A: 45 minutes= 0.75 hours
Part B: 5.3
Explanation:
Don't agree? The calculator says other wise....
i checked it its correct.
What effect does fermented sugar have in beer brewing
Answer:
If the sugar concentration level of the must becomes too high at any given point--either at the beginning or during the fermentation--it starts to have an inhibiting effect on the yeast's ability to produce alcohol. In other words, the higher sugar concentration starts to act as a preservative effecting the fermentation in a negative way.
Explanation:
Fermentation is the process by which yeast converts the glucose in the wort to ethyl alcohol and carbon dioxide gas -- giving the beer both its alcohol content and its carbonation.
Soot is formed as a candle burns
a
Chemical Change
b
Physical Change
Answer:
Chemical change
Explanation:
Because a new substance is formed.
How would you change the type of atom
Answer:
Hi, There! :)
If you change the number of protons an atom has, you change the type of element it is. If you change the number of neutrons an atom has, you make an isotope of that element.
Answer:
If you change the number of protons an atom has, you change the type of element it is. If you change the number of neutrons an atom has, you make an isotope of that element. All known elements are arranged on a chart called the Periodic Table of Elements.
Explanation:
that's what I found buddy
EASY 30 POINTS! PLS HELP ME T-T
1. True or false? All atoms in an element contain an identical number of neutrons.
2. An atom with a _______ charge has the same number of protons and electrons.
3. An atom that has a different number of electrons and protons is called a(n) _______.
Answer:
1.false
2.neutron
3.neutron
Answer:
1. false
2. zero
3. isotopes
hope it helps
Which of these are PHYSICAL changes?
А.
cutting, tearing, freezing, thawing, folding.
mixing without chemical changes
B.
burning, rusting, forming a new substance from
two different substances, exploding, cooking
Answer:
the answer to this problem is a
on what factors the Modern Periodic Table is different from that of the Mendeleev's periodic table?Write any two reasons.
Explanation:
The main difference between Mendeleev and Modern period table is that Mendeleev's periodic table orders the elements based on their atomic mass whereas Modern periodic table orders the elements based on their atomic number.
Mendeleev's periodic law states that the physical and chemical properties of the elements are a periodic function of their atomic weights while Modern periodic law states that physical and chemical properties of elements are a periodic function of their numbers.
How is bacteria are different from animals?
Answer:
Bacteria has 1 cell and An Animal has multiple cells.
Explanation:
Bacteria is a cell its self. While An Animal, It has multiple cells that create multiple tissues, and those tissues create multiple organs, those organs make up an organ system. After the Organ System, it's an organism.
Organism = Animal, Human, Ect.
Meanwhile, Bacteria is made up ONE CELL (bacteria it's self is 1 cell)
So the answer is "Bacteria has 1 cell and An Animal has multiple cells."
I hope this helped!! <33
what are the three formula of mole?
[tex] \huge \boxed{\mathfrak{Formulas} \downarrow}[/tex]
For all[tex] \large \sf \: mole = \frac{mass}{molar \: mass} \\ [/tex]
For gases[tex]\large \sf \:mole = \frac{volume}{molar \: volume} \\ [/tex]
For solutions[tex]\large \sf \:concentration \: ( \frac{g}{ {dm}^{3} } ) \\\large \sf \: = \frac{mass(g)}{volume( {dm}^{3} )} [/tex]
You can substitute mass with mole for concentration (mol/dm³).In two atoms atom 'X' looses two electrons and atom 'Y' gains two electrons to form a compound 'XY'.Name the bond formed between X and Y.With two properties of the compound.
Please help me and i will mark you as brainleist.
Answer:
The bond formed between XY is "Ionic bond"
Explanation:
The bond is ionic bond because the compound XY is formed due to the gaining and loosing of electrons
Properties of Ionic compounds:
They form crystals
They are good insulators
They have high melting and boiling points
.
.
.
Hope it helps
Help anyone can help me do this question,I will mark brainlest.
Explanation:
NA2SO3
Combination of these three elements forms following compounds.
And the compound that's going to be formed,depends on the ratio of available oxygen and sulphur.
Depends on the ratio of sulfur to oxygen...
sodium sulfate, Na2SO4
sodium sulfite, Na2SO3
sodium thiosulfate, Na2S2O3
ionic bond is present in between SO3 -2 and Na+2
structure of SO3 -2 [take - sign as delta - which here indicates,partial formal charge of oxygen] (image below)
Here,The oxygen is more electronegative.So,2 oxygen atoms drag one Electron from sulphur atom,leaving behind the formal charge of -1 on two oxygen atoms.
The third oxygen forms covalent bond by sharing 2 electrons. (Actually this ion has resonance structure)
This sulphite ion combines with two sodium ions to form two ionic bonds.This happens when sodium, being an alkali metal dontes it's valence electron to oxygen.
SO2
In Sulphur dioxide, Sulphur is bonded to 2 oxygen atoms. Oxygen is more electronegative than Sulphur and thus, shows a fixed valency of 2. As a result each oxygen forms two bonds with the Sulphur atom making its valency 4.
NAHSO4
Introducing VIP - Your Progress Is Our Responsibility
KNOW MORE
filledbookmark
USE APP
Sign in
Questions & Answers
CBSE
Chemistry
Grade 11
Oxidation State or Oxidation Number
Question
Answers
Related Questions
The oxidation state of sulphur in NaHSO4 ?
A) 0
B) + 2
C) −2
D) + 4
E) + 6
Answer
VerifiedVerified
72.9K+ Views
Hint: The oxidation state is defined as the charge on the atom. The sum of the oxidation state of an atom in a molecule is equal to the charge on the molecule. The neutral molecules charge less species. It has zero charges.
Complete Solution :
- The oxidation number of an atom is defined as the charge on an atom that appears on the atom on forming an ionic bond. An atom which has higher electronegativity has a negative oxidation state and more electropositive elements have positive oxidation state.
- We are interested in determining the oxidation state of an atom in a molecule. We know that the net charge on a neutral atom or molecule is always equal to zero. Let’s determine the oxidation state of S in the NaHSO4 .
- The oxidation number of alkali metal that is a sodium atom is equal to +1 . Similarly the hydrogen has an +1 oxidation state. Oxygen is an electronegative element. It has an −2 oxidation state. The oxidation states are as listed below:
Element Oxidation state
Na +1
H +1
O −2
We know that the sum of the oxidation state of an atom in a neutral molecule is equal to zero. Then we have,
0 = O.S. of Na + O.S. of H + O.S. of S + 4(O.S. of O)
Let’s substitute the values of oxidation state .we have,
0 = 1 + 1 + O.S. of S + 4(−2)⇒O.S. of S= 8−2 = +6
Therefore the oxidation state of sulphur in NaHSO4 is equal to +6 . So, the correct answer is “Option E”.
H2S
Valency of sulphur is 2 in H2S
Is it possible to prove that something is real or true of you can’t directly observe it? If no, why not? If yes, how would you do that?
Answer:
yes
Explanation:
Anything that is verifiable and repeatable is likely to be true. If not verifiable and repeatable, then it may well be completely false, or at least partially false.
This holds for much more than just religious beliefs. What about political thought? One perfect example was when President Obama was pushing his ACA (Obamacare). His facile claim was that with medical coverage for all, the costs of health care would go down. Because people would take better care of themselves, avoiding those major medical bills. But that's just a banality, right? Just words that sound good. I'm not saying that morally, universal health care is wrong. I am saying, don't assume something to be true just because it sounds good. (Of course, health care costs went up, not down.)
Is it true that if you get your car washed every week, it will last longer and cost you less in the long run? Of course not. But it sounds good. People will nod their heads in mindless, lazy agreement. You'll have a cleaner car, you will most likely pay more, and it may last less long, depending on any number of factors. Exactly the same as health care
Sorry for the spamming, but this question is URGENT here,
Which of the following is
property of metals?
A. brittle
B. good conductivity."
C. poor conductivity
(Btw here’s a picture :O)
Option B, Metals have good conductivity.
Hope it helps you.. pls mark brainliest if it helps you
what dose gravity measure ?
Answer:
the acceleration that it gives to freely falling objects.
Explanation:
i took quiz
An atom of sodium-23 (Na-23) has a net charge of
+1. Identify the number of protons, neutrons, and
electrons in the atom. Then, explain how you
determined the number of each type of particle.
Use the
periodic table to help you.
Answer:
Protons= 11
neutrons= 12
electrons = 10
Explanantion:
Look for Na on periodic table
Atomic Number = 11
Atomic Mass = 23 (round it to be an integer)
Number of protons = Atomic number = 11
Number of neutrons = Atomic mass - atomic number = 23-11 =12
Number of electrons = 11 - e = ´+1 , electrons = 10
Answer:
Protons= 11
neutrons= 12
electrons = 10
Explanation:
That should be the answer :)
(Physical Science)
Which group of metals includes elements with one valence electron? (1 point)
A. alkaline earth metals
B. rare earth metals
C. alkali metals
D. transition metals
Answer:
C
Explanation:
alkali metals are the Group I elements, which have 1 electron in their valence shells
Answer:
Alkali metals are the elements which have only one valence electron in their outermost or ultimate shell.
Explanation:
Alkaline Earth metals have 2 valence electron in their outermost shell and readily give up their 2 electron to achieve stability.
Rare Earth Metals have 3 valence electron in their outermost shell and they have high magnetic moments and divert range of magnetic structure.
Alkali Earth metals have 1 valence electron.
Transition metals generally have 2 valence electron .
Learn more on:
https://brainly.com/question/3062525
Chemical changes can change which properties of a substance?
Group of answer choices
Reactivity
Color
Malleability
All of the above
Answer:
» Reactivity and color
Explanation:
though color is very minor answer because it also relates to a physical property.
[tex].[/tex]
If you burn a citronella candle near your picnic will it keep mosquitoes away
Answer:
Thanks!!!
Explanation:
Answer:
true
Explanation:
The atomic number of the element with the maximum number of unpaired 2p electrons in the ground state is
1) 1 2) 7 3) 13 4) 8
Freezing water cracking limestone
a
Chemical Change
b
Physical Change
Answer:
Freezing water and cracking limestone are physical changes.