Sorting the chemical elements in order from least reactive to most reactive, we have:
1. Fluorine (F).
2. Arsenic (As).
3. Antimony (Sb).
4. Silicon (S).
Given the following chemical elements:
Antimony (Sb).Silicon (S).Fluorine (F).Arsenic (As).Reactivity can be defined as a chemical property which determines how readily a chemical element bonds with other chemical elements, in order to form a new chemical compound.
Generally, the ability of a chemical element to bond with other chemical elements is largely (highly) dependent on the number of valence electrons it has in the outermost shell of its atomic nucleus.
As a general rule, chemical elements that are having fewer number of valence electrons are the most reactive while those having higher valence electrons are least reactive.
Also, chemical reactivity decreases down a group on the periodic table.
Based on the periodic table, the valency for the given chemical elements are:
Antimony (Sb): 5 valence electrons.Silicon (S): 4 valence electrons.Fluorine (F): 7 valence electrons.Arsenic (As): 5 valence electrons.In conclusion, sorting the chemical elements in order from least reactive to most reactive, we have:
1. Fluorine (F).
2. Arsenic (As).
3. Antimony (Sb).
4. Silicon (S).
Find more information: https://brainly.com/question/18214726
1. Which of the following statements pertaining to the ionic solids represented below are true?
(0)
1.
Both structure are ductile.
II. Structure (1) has a higher melting point than structure (ii)
III. Both structures conduct electricity in the solid state.
IV. Both structures conduct electricity in the liquid state.
Answer:
B
Explanation:
so A is nosense C and D the question is saying the stament for a being repersentation of solid not whether eletric or not
Two chemical reactions are shown:
A. Ca(OH)2 - CaO + H2O
B. 4K + O2 + 2K20
Which statement is true?
A. Both are synthesis reactions
B. Both are decomposition reactions
C. A is a synthesis reaction, and B is a decomposition reaction
D. A is a decomposition reaction, and B is a synthesis reaction
Answer: A is a decomposition reaction, and B is a synthesis reaction
Explanation: the first equation shows the reactant breaking up into 2 parts aka decomposition and equation 2 shows the reaction being combined into one part, aka synthesis. hope that helps!
Answer:
Answer d
Explanation:
What is the meaning of term Amino acid
Answer:
Amino acids are molecules that combine to form proteins.
Explanation:
Amino acids are molecules that combine to form proteins. Amino acids and proteins are the building blocks of life. When proteins are digested or broken down, amino acids are left. The human body uses amino acids to make proteins to help the body: ... Repair body tissue.
Hope this helps :)
Please help! Giving 20 points!
Question: How can NASA scientists use Newton's third law of motion to plan for a space vehicle landing on a meteor? Make a claim. Support your claim with evidence from the article. Then, explain why the evidence supports your claim.
Article: https://newsela.com/read/lib-newton-third-law/id/54749/
Answer:
Explanation:
NASA uses rockets to launch astronauts and supplies to the International Space Station. Launching a rocket relies on Newton's Third Law of Motion. A rocket engine produces thrust through action and reaction. The engine produces hot exhaust gases which flow out of the back of the engine
mark me brainliest :D
What is carbon? What does it do?
what is the difference in chemical energy between organic and inorganic materials?
Answer:
the difference is the presence of a carbon atom
Explanation:
una pieza de hierro de 25cm3 tiene una masa de 195g cual es su densidad?
Answer:
Pretend you are a TV producer. Think of ideas for new TV shows. Your objective is to create ideas that will be successful, regardless of whether this is quality programming or not. Think of an idea of a copy. Explain the basics of what this show will be like and what show it is copying. Explain why you feel this show will be popular. Think of an idea of a spin-off. Explain the basics of what this show will be like and what show it is spinning off from. Explain why you feel this show will be popular. Think of an idea for a TV show that falls into one of the genre categories listed in the genre chart. Describe the basics of the show and how it falls under the genre’s expectations for characters, plots, and aesthetics. Explain why you feel this show will be popular.
what chemical properties does soap have that makes it a good cleaning agent?
Answer:
Soap is an excellent cleanser because of its ability to act as an emulsifying agent. An emulsifier is capable of dispersing one liquid into another immiscible liquid. This means that while oil (which attracts dirt) doesn't naturally mix with water, soap can suspend oil/dirt in such a way that it can be removed.
Soap acts as a cleaner because of its ability to act as an emulsifying agent. A soap molecule has a polar head and a nonpolar tail. Soap consists of a carbon chain where one end attracts oil and the other attracts water.
What is the cleaning action of soap?Most of dirt can be described as oily in nature as oil does not dissolve in water. The molecule of soap consists of sodium salts of long-chain carboxylic acids. In soaps, the chain of carbon atoms dissolves in the oil, and the ionic or polar end of the soap molecule dissolves in water.
The soap molecules produce structures known as micelles. In micelles, one end faces the oil droplet, and the other end which is ionic in nature faces outside. Therefore, soap can form an emulsion in water and supports in dissolving the dirt when we wash our clothes.
Soap can be described as a kind of molecule in which both ends have different properties. The hydrophilic end dissolves water and is attracted to it whereas the hydrophobic end is dissolved in hydrocarbons and is water repulsive in nature.
Learn more about cleaning action of soap, here:
https://brainly.com/question/29509623
#SPJ2
HURRY for a BRAINLIST
Answer:
B
Explanation:
Answer:
answers
B
Explanation:
Explicaciónexplicacaca
what word describes when tiny droplets of one liquid are finely dispersed within another liquid?
When tiny droplets of one liquid are finely dispersed within another liquid it is called emulsion.
Emulsion can be defined as the process by which two liquids that are not miscible come together to form a mixture.
The emulsion mixture usually consists of an oil phase and a water phase.
The oil phase appears as droplets when dispersed (mixed with) the water phase.
The uses of emulsion include:
It is used in chemical industries for production.It is used for production of medicine.Digestion of fatty food components in the intestine takes place through the process of emulsion.Learn more here:
https://brainly.com/question/17288119
Distinguish between the first, second, and third ionization energies of an atom. b. How do the values of successive ionization energies compare
Answer:
The third ionization energy is the energy it takes to remove an electron from a 2+ ion. (That means that the atom has already lost two electrons, you are now removing the third.) And 2nd ionization energy is higher than 1st ionization energy, 3rd is higher than 2nd, and so forth.
hope it is helpful :)
ΕΛΑ
1
a
C
Copper(II) nitrate decomposes on heating. The reaction is endothermic.
2Cu(NO),(s) → 2CuO(s) + 4NO2(g) + 0,(9)
Sketch a reaction pathway diagram for this reaction to include the
activation energy
[3]
b Draw an energy cycle to calculate the standard enthalpy change for
this reaction, using enthalpy changes of formation.
[3]
Calculate the enthalpy change for this reaction using the following
enthalpy changes of formation.
AH, [Cu(NO, ),(s)] = -302.9 kJ mol-'
AH, [CuO(s)] =-157.3 kJ mol-!
AH [NO,(g)] = +33.2 kJ mol-!
[3]
d Copper(II) sulfate is soluble in water. A student dissolved 25.0 g of
copper(II) sulfate in 100 cm of water in a polystyrene beaker stirring
all the time. The temperature of the water fell by 2.9 °C.
i Calculate the enthalpy change of solution of copper(II) sulfate.
(specific heat capacity of water = 4.18 Jg1 °C ; relative
molecular mass of copper(II) sulfate = 249.7 g mol-')
[3]
ii Suggest one source of error in this experiment and explain how
the error affects the results.
[2]
[Total: 14]
This problem provides information about the decomposition of copper(II) nitrate to copper(II) oxide and dinitrogen monoxide; for example, it is endothermic, the enthalpies of formation and the chemical reaction, as well as copper (II) sulfate which when dissolved in water, exhibits a temperature decrease:
[tex]2Cu(NO_3)_2(s) \rightarrow 2CuO(s) + 4NO_2(g) + O_2(g)[/tex]
First of all, we can draw the reaction pathway as shown on the attached figure, by taking into account the positive enthalpy change as it is endothermic, so that the products turn out with higher energy than the reactants, for it to be positive. In addition, keep in mind that top point is the activation energy the reaction needs to take place.
Next, we calculate the enthalpy change for this reaction by using the general formula which subtracts the enthalpy of formation of products and reactants with each species' correct stoichiometric coefficient:
[tex]\Delta H=2\Delta _fH_{CuO}+4\Delta _fH_{NO_2}+\Delta _fH_{O_2}-2\Delta _fH_{Cu(NO_3)_2}[/tex]
So we plug in the given enthalpies of formation:
[tex]\Delta H=2(-157.3)+4(33.2)+(0)-2(-302.9)=424.0 kJ/mol[/tex]
Finally, we go over the calorimetry experiment, whereby the total heat absorbed by the copper(II) sulfate is calculated via the general heat equation, which includes the heat loss from the solution of water and the salt:
[tex]Q_{rxn}=-mC_w\Delta T\\\\Q_{rxn}=-(100+25)g*4.18\frac{J}{g\°C}*-2.9\°C=1515.25J[/tex]
By dividing the previous answer by the moles of salt:
[tex]n=25.0g*\frac{1mol}{249.7g}=0.100mol[/tex]
We can obtain the enthalpy change of solution of the copper salt:
[tex]\Delta _{dissolution}H=\frac{1,515.25J}{0.100mol} \\\\\Delta _{dissolution}H=15,134J/mol=15.1kJ/mol[/tex]
To conclude, it is important to note that one possible source of error is we are assuming the solution has the same specific heat to that of water and that is not necessarily true. Also, we are neglecting any heat transfer to and from the surroundings despite the polystyrene beaker is considered a heat isolator, which means the results cannot necesarilly be accurate and the enthalpy change could have turned out higher or lower in a rigoruous experiment.
Learn more:
https://brainly.com/question/15862043https://brainly.com/question/11667877Please help me no links
if good answer you get brainliest
Answer:
plutonic rocks are formed when magma cools and solidifies underground This shows us if the rock is plutonic or volcanic. When magma cools underground, it cools super slow and when lava cools above ground, it cools faster. When magma and lava cool, mineral crystals start to form in the molten rock.
Explanation:
i hope this is correct
What is the formula for the ionic compound formed by calcium and selenium?
Answer:
CaSe
Explanation:
not sure!!
Does chlorine have a smaller ionic radius than soium.
Answer:
sodium atoms are much larger than chlorine atoms but in case of sodium ions they are much smaller thqn chlorine ions
Compared to the energy of an electron in the second shell of an atom of sulfur, the energy of an electron in the
1
first shell is lower
2
first shell is the same.
3
third shell is lower
4
third shell is the same.
Answer:
First shell is lower
Explanation:
The electron has to absorb energy to excite and go to higher energy levels/ shells and should release energy to go to lower energy levels/ shells. This means higher the shell , more energy is required and vice versa
14 In which group are all the elements found
naturally only in compounds?
(1). 18
(3) 11
(2) 2
(4) 14
What is q in chemistry.
Answer:
The reaction quotient!
Explanation:
hope this helped :D
The half-life of Palladium-100 is 4 days. After 16 days a sample of Palladium-100 has been reduced to a mass of 6 mg. What was the initial mass (in mg) of the sample
Answer:
96mg
Explanation:
Since the half-life of Palladium-100 is 4 days and the sample has been reduced after 16 days, that means the sample has undergone four half-lives. To find the intial mass, just work backwards:
6 x 2= 1212 x 2= 2424 x 2= 48 48 x 2= 96As you see, I've worked backwards from the four half-lives. So the initial mass after 16 days is 96 mg.
Why do elements in the same group have similar physical and chemical properties
Answer:
Each element within a group has similar physical or chemical properties because of its atom's outermost electron shell (most chemical properties are dominated by the orbital location of the outermost electron).
Explanation:
Help me please, I don't get it. Please & thank you, xoxo !
Sorry I accidentally touched it
Complete the sentence.
Atoms form chemical bonds to satisfy the ______
rule and to become _______
Explain how magnesium is produced at the negative electrode from molten magnesium chloride
Answer:
being cation it migerates to cathode to be reduced to elemental magnesium
Explanation:
Mg+2. +2e -----------Mg
2. How many of valence electrons do the elements in column 4 have? Are these elements very reactive?
Explain your answer.
Answer:
4
Explanation:
Elements in group 14 have 4 valence electrons. Meaning that to achieve a stable octet they need to either gain or lose 4 electrons in total.
Write the balanced chemical equation for the reaction
of solid carbon with oxygen gas to form carbon monoxide gas.
Answer:
2C +O2 - COExplanation:
mark me brainliest
The balanced chemical equation for the reaction of solid carbon with oxygen gas to form carbon monoxide gas is 2 C + O₂[tex]\rightarrow[/tex] 2 CO.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ2
Describe the physical properties of Copper (Cu) based on what you know about metals, nonmetals, and metalloids
Answer:
Copper is reddish brown color
Its density is 8.93 g cm-3
highly malleable at ordinary temp, but is brittle near its melting point
god conductor of heat and electricity
Explanation:
an atom of ordinary hydrogen consists of an electron and a
Answer: hydrogen atom is an atom of the chemical element hydrogen. The electrically neutral atom contains a single positively charged proton and a single negatively charged electron bound to the nucleus by the Coulomb force.
Explanation:
An atom of ordinary hydrogen consists of one electron and one proton and zero neutrons.
What is a hydrogen atom?Hydrogen is a chemical element placed at the top of group 1 in the periodic table and is represented by the chemical symbol H and atomic number 1.
A hydrogen atom is the lightest atom of the element in the whole periodic table. Hydrogen exists as a gas of diatomic molecules having the formula H₂ at standard conditions. Hydrogen gas is tasteless, colorless, odorless, non-toxic, and highly combustible.
Hydrogen is constituting roughly 75% of all normal matter and is the most abundant chemical substance in the universe. Most of the hydrogen element on Earth exists in forms like water and organic compounds. Each atom of hydrogen (¹H) has one proton, one electron, and no neutrons.
Hydrogen element is nonmetallic and easily forms a single covalent bond with most nonmetallic elements, forming compounds like water.
Learn more about hydrogen, here:
https://brainly.com/question/28060590
#SPJ6
Answer please
.............................................................
This is not exactly a answer you can use but this is some information that you can use to find out the answer.
You can usually confirm the charge associate degree particle unremarkably has by the element's position on the periodic table: The alkali metals (the IA elements) lose one negatron to create a ion with a 1+ charge. The alkaline-earth metal metals (IIA elements) lose 2 electrons to create a 2+ ion.
Nonmetals type negative ions (anions). A range 7|chemical element|element|gas} atom should gain 3 electrons to possess an equivalent number of electrons as AN atom of the subsequent gas, neon. Thus, a gas atom can type AN ion with 3 additional electrons than protons and a charge of 3−.
Will the things dissolve by themselves over time?
When a substance dissolves, it looks like it disappears. But in fact it has just mixed with the water to make a transparent (see-through) liquid called a solution. A solution has two parts. The solute is the solid that gets dissolved.
Answer:
it really depends what they are
Explanation:
How to calculate work done with change in volume and pressure.
[tex]W = \displaystyle \int dW = \displaystyle \int^{V_2}_{V_1} p ~dV = p(V_2 - V_1) = p \Delta V[/tex]
