Answer:
The correct answer is 0.12 grams.
Explanation:
The mass of carbon monoxide or CO collected in the tube can be determined by using the ideal gas equation, that is, PV = nRT.
Based on the given question, P or the pressure of the gas is given as 1 atm, volume of the gas collected in the tube is 117 ml or 0.117 L.
The number of moles or n can be determined by using the equation, mass/molar mass.
R is the universal gas constant, whose value is 0.0821 L atmK^-1mol^-1, and temperature is 55 degree C or 328 K (55+273).
On putting the values we get:
n = PV/RT
= (1 atm*0.117 L) / (0.0821 L atmK^-1mol^-1 * 328 K)
= 0.0043447 mol
Therefore, mass of CO will be moles * molar mass of CO
= 0.0043447 mol * 28 g/mol
= 0.12 g
CH³C⁴HCOCH³ how many atoms of each element are in one molecule of 2-heptanone
Answer:
- 7 carbon atoms.
- 14 hydrogen atoms.
- 1 oxygen atom.
Explanation:
Hello,
In this case, for the given compound, heptanone, whose chemical formula is:
[tex]CH_3COCH_2CH_2CH_2CH_2CH_3[/tex]
We can write the molecular formula showing the present atoms of each element:
[tex]C_7H_{14}O[/tex]
In such a way we have:
- 7 carbon atoms.
- 14 hydrogen atoms.
- 1 oxygen atom.
Best regards.
The Earth's mantle is
A.
hotter than the crust but cooler than the core.
B.
hotter than both the crust and the core.
C.
cooler than both the crust and the core.
D.
cooler than the crust but hotter than the core.
Answer:
C. cooler than both the crust and the core
Explanation:
It is observed that at the mantle, temperatures range from estimatedly 200 °C (392 °F) around the upper boundary with the crust to approximately 4,000 °C (7,230 °F) at the core-mantle boundary.
So we can say the mantle is cooler than both the crust and the core.
At constant pressure, what generally happens to the solubility of solids and gases when the temperature of a solution is increased?
A. The solubility of solids and gases increases.
B. The solubility of solids and gases decreases.
C. The solubility of solids increases, and the solubility of gases decreases.
D. The solubility of solids decreases, and the solubility of gases increases.
Answer:
C)
Explanation:
JUST DID IT
Answer:
A D E
Explanation:
just did it
How to make isopropyl alcohol
Answer:
.It is easily synthesized from the reaction of propylene with sulfuric acid, followed by hydrolysis. Isopropyl alcohol (2-propanol) is made by indirect hydration of propylene (CH2CHCH3).… In some cases the hydration of propylene is carried out in one step, using water and a catalyst at high pressure.
Hope it'll help!
stay safe:)
2. What happens to the pH when you add more H+ ions to a solution that has no buffers?
A sample of gas at occupies 10m3 at a pressure of 120 kPa. If the volume of the sample is changed to 3m3, what is the new pressure of the gas?
Answer:
400 kPa
Explanation:
Please see the step-by-step solution in the picture attached below.
Hope this answer can help you. Have a nice day!
Answer:
400 kPa
The answer is right since its from ck12
Based on the diagram below, how much of the excess reactant is left over? *
2 slices of bread and 3 pieces of lunchmeat
2 slices of bread and 2 slices of cheese
2 of lunchmeat and 3 slices of cheese
3 of lunchmeat and 2 slices of cheese
Answer:
3 pieces of lunch-meat and 2 slices of cheese
Explanation:
You have enough bread to make 3 sandwiches
You have enough lunch-meat to make 4 sandwiches
You have enough cheese to make 5 sandwiches
In all you have enough material to make 3 sandwiches
so if you subtract three from each number above you will have no bread, enough lunch-meat to make one sandwich and enough cheese to make two sandwiches
luch-meat for one sandwich is: 3 pieces
Cheese for two sandwiches is: 2 pieces
Which picture shows how the moon from earth when it’s in the position
Explanation:
This picture shows how the moon from earth when it is in position
What is the concentration of a solution in which 0.99 g of KOH are dissolved in 500 mL?
Answer:
.00352mol/L
Explanation:
molarity (concentration) = number of moles / volume of solvent (in L)
M = .99g / 56.108g/mol / .5L
M = .0176mol / .5L
M = .00352mol/L
Which diagram correctly describes the changes that occur as a small piece of rock falls from space and hits the earth
Answer:
the motion of gravity
Explanation:
Answer:
its c
Explanation
advhuosijoklxcmnjdabsuhggggabciaciudeifweingivg eygerigsygfe97rsghisdcvhbsduigwiugfu9uigdgiurfgyisdgfsdgfegiygewifgsdygfewusgfuyesigf7wgfiesgfiusgdfies
How is a niche different than a habitat?
A habitat is more than a physical place; it's a species' role in a specific place and it can change from niche to niche.
A niche is more than a physical place; it's a species' role in a specific place and it can change from habitat to habitat.
A niche and a habitat are the same.
A niche is just a physical place; a habitat is a species' role in a specific place.
Answer:
A niche is more than a physical place; it's a species' role in a specific place and it can change from habitat to habitat.
Explanation:
Niche: In biology, the term "niche" is described as a process through which different organisms tends to fit-in into a specific ecosystem or an ecological community. However, a niche is considered as the "evolutionary result" of a specific species behavioral, morphological, and physiological adaptations associated with its surroundings.
Habitat: In biology, the term "habitat" is described as an environmental or ecological area that is being inhabited by a specific species of plants, animals, or other organisms.
Therefore, a niche is entirely different from a habitat because an organism's niche tends to explain every different aspect of its life whereas its habitat explains the place it lives.
The temperature of a 350. mL sample of gas increases from 27 °C to 227 °C. What is the final volume of the sample of gas, if the pressure and amount of gas in the container is kept constant?
Group of answer choices
Answer:
[tex]V_2=583.3mL[/tex]
Explanation:
Hello,
In this case, for the given constant amount and pressure of the, we apply the Charles' law which allows us to understand the volume-pressure behavior as a directly proportional relationship:
[tex]\frac{V_1}{T_1} =\frac{V_2}{T_2}[/tex]
Thus, since we need to compute the volume after the temperature increase (which must be expressed in absolute Kelvins), we obtain V2 as:
[tex]V_2=\frac{V_1T_2}{T_1} =\frac{350.0mL*(227+273.15)K}{(27+273.15)K}\\ \\V_2=583.3mL[/tex]
Best regards.
if a sample of gas at 25.2 c has a volume of 536mL at 637 torr, what will its volume be if the pressure is increased to 712 torr?
Describe an autopsy table
After the body is cleaned, the body is weighed and measured before being placed on the autopsy table for reexamination. The autopsy table is typically a slanted, aluminum table with raised edges that has several faucets and drains used to wash away collecting blood during the internal investigation.
Answer:
A table used to scientifically determine the cause of death of a human or animal
Explanation:
What is the hydronium ion concentration of a 0.100 M acetic acid solution with Ka = 1.8 × 10-5? The equation for the dissociation of acetic acid is: CH3CO2H(aq) + H2O(l) ⇌ H3O+(aq) + CH3CO2-(aq) What is the hydronium ion concentration of a 0.100 M acetic acid solution with Ka = 1.8 × 10-5? The equation for the dissociation of acetic acid is: CH3CO2H(aq) + H2O(l) ⇌ H3O+(aq) + CH3CO2-(aq) 1.3 × 10-2 M 4.2 × 10-2 M 1.3 × 10-3 M 4.2 × 10-3 M
Answer:
1.3×10⁻³ M
Explanation:
Hello,
In this case, given the dissociation reaction of acetic acid:
[tex]CH_3CO_2H(aq) + H_2O(l) \rightleftharpoons H_3O^+(aq) + CH_3CO_2^-(aq)[/tex]
We can write the law of mass action for it:
[tex]Ka=\frac{[H_3O^+][CH_3CO_2^-]}{[CH_3CO_2H]}[/tex]
Of course, excluding the water as heterogeneous substances are not included. Then, in terms of the change [tex]x[/tex] due to the dissociation extent, we are able to rewrite it as shown below:
[tex]1.8x10^{-5}=\frac{x*x}{0.100-x}[/tex]
Thus, via the quadratic equation or solve, we obtain the following solutions:
[tex]x_1=-0.00135M\\x_2=0.00133M[/tex]
Obviously, the solution is 0.00133M which match with the hydronium concentration, thus, answer is: 1.3×10⁻³ M in scientific notation.
Regards.
Answer:
1.3×10^-3 M
Explanation:
Step 1:
Data obtained from the question:
Equilibrium constant (Ka) = 1.8×10^-5
Concentration of acetic acid, [CH3COOH] = 0.100 M
Concentration of hydronium ion, [H3O+] =..?
Step 2:
The balanced equation for the reaction.
CH3CO2H(aq) + H2O(l) ⇌ H3O+(aq) + CH3CO2-(aq)
Step 3:
Determination of concentration of hydronium ion, [H3O+].
This can be obtained as follow:
Ka = [H3O+] [CH3CO2-] / [CH3CO2H]
Initial concentration:
[CH3COOH] = 0.100 M
[H3O+] = 0
[CH3CO2-] = 0
During reaction
[CH3COOH] = – y
[H3O+] = +y
[CH3CO2-] = +y
Equilibrium:
[CH3COOH] = 0.1 – y
[H3O+] = y
[CH3CO2-] = y
Ka = [H3O+] [CH3CO2-] / [CH3CO2H]
1.8×10^-5 = y × y / 0.1
Cross multiply
y^2 = 1.8×10^-5 x 0.1
Take the square root of both side
y = √(1.8×10^-5 x 0.1)
y = 1.3×10^-3 M
[H3O+] = y = 1.3×10^-3 M
Therefore, the concentration of the hydronium ion, [H3O+] is 1.3×10^-3 M
It takes 300 N to move a box 10 meters in 10 seconds. How much power is
required?
A. 30,000 W
B. 100 W
C. 3,000 J
D. 300 W
Plz help
Answer:
Power, P = 300 W
Explanation:
We have,
Force acting on the box to take it is 300 N
It is moved to a distance of 10 m in 10 seconds
It is required to find the power required to move the box. The rate at which work is done is called power required by an object. It can be given by the formula as follows :
[tex]P=\dfrac{W}{t}\\\\P=\dfrac{Fd}{t}\\\\P=\dfrac{300\times 10}{10}\\\\P=300\ W[/tex]
So, the power required is 300 W.
Why did the Mt. Pinatubo eruption result in global temperatures dropping almost two degrees?
Answer:
In the case of Mount Pinatubo, the result was a measurable cooling of the Earth's surface for a period of almost two years. Because they scatter and absorb incoming sunlight, aerosol particles exert a cooling effect on the Earth's surface.
Explanation:
Temperature measures the average kinetic energy of particles of the substances. Therefore, the Mt. Pinatubo eruption result in global temperatures dropping almost two degrees.
What is temperature?Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.
Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.
We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:
°C={5(°F-32)}÷9
The Mt. Pinatubo eruption result in global temperatures dropping almost two degrees because they scatter and absorb incoming sunlight, aerosol particles exert a cooling effect on the Earth's temperature.
Therefore, the Mt. Pinatubo eruption result in global temperatures dropping almost two degrees.
To know more about temperature, here:
https://brainly.com/question/13694966
#SPJ6
How many grams do 4.8 x 1026 atoms of silicon
weigh?
Answer in units of g.
The glass of a lit 75-watt incandescent bulb is hotter to the touch than the glass of a 25-watt compact fluorescent (CFL) bulb that emits the same amount of light. What could be a reason for this
A child shivers in a cold rain but does not feel cold, what is the biochemistry behind it
Due to prokaryote
Explanation:
A chemist wants to increase the solubility of a solid in water. Which of the
following will NOT help? *
-increase the temperature
-decrease the particle size
-Increase stirring
-increase pressure
Answer:
- Increase pressure .
Explanation:
Hello,
In this case, during the dissolution process, the solute's molecules rearrange in order to get together with the solvent's molecules, in this case water.
Now, since we are talking about a solid whose particles are intimately held together, the only way to separate them is by increasing the temperature because the molecules start moving so they can join water's molecules, decreasing particle size since they will be more likely to separate to each other and increasing stirring since the applied energy will break the solid's intramolecular forces.
In such a way, since pressure significantly affects gases and slightly affects liquid, it is not able to modify a solid, just extreme pressures such as it needed to produce diamonds, is able to affect a solid. For that reason, increasing the pressure will not increase the solid's solubility.
Best regards.
If an insufficient amount of liquid unknown had been used, how would this have effected the value of the experimental molar mass
Answer:
Actual yield reduces the more.
Explanation:
An actual yield of the course of a chemical reaction is the mass of a product actually obtained from the reaction.
In practice you see it and It is usually less than the theoretical yield.
Various reasons may come up to explain this away but here is one:
• incomplete reactions, simply put here some of the reactants do not react to form the product.
The same applies in the question about the actual yield will reduce significantly in molar mass now that insufficient amount of reagent are used.
Considering the limiting reactant, what is the mass of zinc sulfide produced from 0.250 g of zinc and 0.750 g of sulfur? Zn(s)+S(S) ZnS(s)
Answer:
The mass of zinc sulfide produced is [tex]M_{ZnS} = 0.76 \ g[/tex]
Explanation:
From the question we are told that
The mass of zinc is [tex]m_z = 0.750 \ g[/tex]
The mass of sulfur is [tex]m_s = 0.250 \ g[/tex]
The molar mass of [tex]Zn_{(s)}[/tex] is a constant with value 65.39 g /mol
The molar mass of [tex]S_{(s)}[/tex] is a constant with value 32.01 g/mol
The molar mass of [tex]ZnS_{(s)}[/tex] is a constant with value 97.46 g/mol
The reaction is
[tex]Zn_{(s)} + S_{(s)} ------> ZnS_{(s)}[/tex]
So from the reaction
1 mole of [tex]Zn_{(s)}[/tex] react with 1 mole of [tex]S_{(s)}[/tex] to produce 1 mole of [tex]ZnS_{(s)}[/tex]
This implies that
65.39 g /mol of [tex]Zn_{(s)}[/tex] react with 32.01 g/mol of [tex]S_{(s)}[/tex] to produce 97.46 g/mol of [tex]ZnS_{(s)}[/tex]
From the values given we can deduce that the limiting reactant is sulfur cause of the smaller mass
So
0.250 g of [tex]Zn_{(s)}[/tex] react with 0.250 of [tex]S_{(s)}[/tex] to produce [tex]x \ g[/tex] of [tex]ZnS_{(s)}[/tex]
So
[tex]x = \frac{97.46 * 0.250}{32.01}[/tex]
[tex]x = 0.76 \ g[/tex]
Thus the mass of the mass of zinc sulfide produced is
[tex]M_{ZnS} = 0.76 \ g[/tex]
What is the molarity of sodium hydroxide solution made by combining 2.0 L of 0.60
NaOH With 495 mL 3.0 M NaOH? Assume the volumes of the two solutions to be additive___M
Answer:
[tex]M=1.1M[/tex]
Explanation:
Hello,
In this case, since we are mixing two NaOH solutions, the first step is to compute the total moles once the mixing is done, by using the volumes and concentrations of each solutions and subsequently adding them:
[tex]n_T=2.0L*0.60\frac{mol}{L}+495mL*\frac{1L}{1000mL}*3.0\frac{mol}{L}= 2.7molNaOH[/tex]
Next, we compute the total volume by adding the volume of each solution:
[tex]V_T=2.0L+495mL*\frac{1L}{1000mL}= 2.495L[/tex]
Finally, we compute the molarity of the resulting solution by the division between the total moles and the total volume:
[tex]M=\frac{2.7mol}{2.495L}\\ \\M=1.1M[/tex]
Best regards.
What is the symbol for the entity that has 17 protons, 20 neutrons, and 18 electrons?
hEy!!!
Chlorine(CL) is the symbol for the entity that has 17 protons,20 neutrons and 18 electrons.
Hope it will be helpful to you...
Answer:chlorine
Explanation:
When you add a controlled amount of substance known as an impurity to a pure semiconductor, its conductivity increases. This process is known as doping. The addition of an impurity can increase or decrease the number of available electrons. If the number of electrons is increased, the extra electrons conduct electricity. If the number of electrons is decreased, a vacant hole is created. The adjacent electron enters the vacant hole and conducts electricity. Thus, it seems like the holes act as charge carriers. They are considered to be positive charge carriers. Depending upon the charge carriers that conduct electricity, there are two types of semiconductors: p-type semiconductors and n-type semiconductors.Which of the following statements are correct with respect to semiconductors?
a) The addition of group 3A elements to group 4A semiconductors decreases the conductivity of the group 4A semiconductors.
b) The conductivity of semiconductors can be increased by the doping process.
c) As the temperature increases, the conductivity of semiconductors decreases.
d) The addition of group 5A elements to group 4A semiconductors increases the conductivity of the group 4A semiconductors.
e) Holes are charge carriers in p-type semiconductors.
f) Electrons are charge carriers in n-type semiconductors.
Answer:
See explaination
Explanation:
1. The addition of group 3A elements to group 4A semiconductors decreases the conductivity of the group 4A semiconductors: Wrong
The addition of 3A group elements inreases the conductivity and make them extrinsic semiconductors( p-type)
2. The conductivity of semiconductors can be increased by the doping process.: Correct
3.As the temperature increases, the conductivity of semiconductors decreases.. wrong
As the temperature increases, the conductivity of semiconductors increases.
4. The addition of group 5A elements to group 4A semiconductors increases the conductivity of the group 4A semiconductors: Correct : They will create n-type semicoductor.
5.Holes are charge carriers in p-type semiconductors: Correct
6. Electrons are charge carriers in n-type semiconductors: Correct
If I add 50 mls of water to 300 mls of 0.6M KNO3 solution, what will be the molarity of the diluted solution?
Answer:
[tex]M_2=0.51M[/tex]
Explanation:
Hello,
In this case, for this dilution process, we understand that the moles of the solute (potassium nitrate) remain unchanged upon the addition of diluting water. However, the resulting or final volume includes the added water as shown below:
[tex]V_2=300mL+50mL=350mL[/tex]
In such a way, we are able to relate the solution before and after the dilution by:
[tex]V_1M_1=V_2M_2[/tex]
Hence, we solve for the final molarity as:
[tex]M_2=\frac{M_1V_1}{V_2}=\frac{0.6M*300mL}{350mL}[/tex]
Best regards.
[tex]M_2=0.51M[/tex]
Helium occupies a volume of 3.8 L at –45°C. What was its initial temperature when it occupied 8.3 L?
Answer:
98.3 gradius Celsius
Explanation:
This problem is solved using the Ideal Gas Equation
pV = nRT
...
Please see the step-by-step solution in the picture attached below.
Hope this answer can help you. Have a nice day!
If you start with 64g of a radioactive element how many half-lives would occur before 8g remain?
Answer:
3 half-lives
Explanation:
The half-life is the time that it takes to a radioactive element to decay to half of its initial amount.
Let's suppose we start with 64 g of the radioactive element.
After 1 half-life, the mass of the element will be 32 g.After 2 half-lives, the mass of the element will be 16 g.After 3 half-lives, the mass of the element will be 8 g.Use the graph to determine which is greater, the heat of fusion or the heat of vaporization. Explain how you used the graph to determine that.
(The substance is water)
Answer:
mdjnibfziedosnninjd.zjcssksskskbsksbivfdlvdxkvfuwhiwhwonsk jsbudwuvsaeigdOhgrauvdslnzarm cxwmvakbxsabxwrifwzpgsdoh
ds
