Someone please help? I've had a go at this myself (see picture of working attached) but not sure where to go from there?

75ml of a solutipn of 0.1mol l-1 NaOH neutralises 25ml of a solution of an acid. The formula of the acid is HxA and the concentration of the acid is 0.1mol l-1. What is the value of x?​

Answer:

can you include the choices?

Explanation:

Answer:

Answer b: The law of conservation of matter says that in chemical reactions, the total mass of the products must equal the total mass of the reactants.

Explanation:

hope this helps

Answer:

The amount of heat needed is 593.88 kJ.

2 solutions of NaOH and H₂SO₄ at 29.5 °C are mixed in a coffee-cup calorimeter and after the reaction is completed the temperature is 35.8 °C. The increase in the temperature is 6.3 °C.

To determine the heat of neutralization, Chelsea used a coffee-cup calorimeter.

Initially, she had 2 solutions, NaOH and H₂SO₄, both at 29.5 °C. Upon mixing, the heat was evolved and the final temperature of the solution was 35.8 °C. The neutralization reaction was:

NaOH + H₂SO₄ ⇒ Na₂SO₄ + H₂O

The increase in temperature (ΔT) is equal to the difference between the final temperature and the initial temperature.

[tex]\Delta T = 35.8 \° C - 29.5 \° C = 6.3 \° C[/tex]

This data can be used to calculate the heat of neutralization (q) using the following expression.

[tex]q = c \times m \times \Delta T[/tex]

where,

2 solutions of NaOH and H₂SO₄ at 29.5 °C are mixed in a coffee-cup calorimeter and after the reaction is completed the temperature is 35.8 °C. The increase in the temperature is 6.3 °C.

Learn more: https://brainly.com/question/4040029

Answer:

It depends

Explanation:

This could vary depending on the exact temp, time and minerals. something with alot of salt boils quicker than something without it, so 10.5 grams?

The particular temperature, the passage of time, and the minerals could all affect the amount of grams of liquid water.

Minerals are defined as a naturally crystallized element or chemical compound that was created through geological processes. Natural materials are those that form on their own, such as minerals. Minerals don't droop, melt, or evaporate since they are solids. In contrast to the carbon compounds found in living organisms, minerals are inorganic. Minerals are crystalline: They have a unique atomic composition and arrangement.

Temperature is defined as a measure of hotness or coldness expressed in terms of any number of arbitrary scales that shows the direction that heat energy will naturally flow, i.e., from a hotter body to a colder body. The three temperature scales that are now in use are Kelvin, Celsius, and Fahrenheit. Food, beverages, agriculture, and medical care for both people and animals all depend heavily on temperature.

Thus, the particular temperature, the passage of time, and the minerals could all affect the amount of grams of liquid water.

To learn more about minerals, refer to the link below:

https://brainly.com/question/18078524

#SPJ2

Answer:

Explanation:

lead 3 is correct!!!!!

Answer:

wavelength is 0.77 m

Explanation:

wavelength is y is equal to FB is equal to 44 0340

3 peaks

Explanation:

You can do this perfectly well without referring to chemical shift tables at all. In the spectrum there are a total of three peaks - that means that there are only three different environments for the carbons, despite there being four carbon atoms.

Answer:NaF is ionic. NF3 is covalent. SiF4 is ionic. CaF2 is Ionic and  NH4F is also ionic. Ionic compounds transfer electrons whereas covalent compounds share electrons hence the word "co". Also, ionic compounds are formed with metal and nonmetal. Where a covalent is with 2 nonmetals. Only ionic compounds would produce fluoride in water because ionic compounds can dissolve in water and covalent compounds cant.

The compounds that can be used for the release of fluorine in water are NaF, [tex]\rm SiF_4[/tex], [tex]\rm CaF_2[/tex], and [tex]\rm NH_4F[/tex].

The ionic compounds are formed by the transfer of electrons between the atoms of the compounds. The ionic bonds are weaker and are easy to dissociate in the aqueous solution.

The covalent compounds are formed by the sharing of electrons between the atoms. Since there is sharing, there has been a strong bond, that has been hard to dissociate.

The Mayor has to release Fluoride in the water, thus ionic compounds are preferred that have the easy release of fluorine.

From the given compounds:

Thus the compounds that can be used for the release of fluorine in water are NaF, [tex]\rm SiF_4[/tex], [tex]\rm CaF_2[/tex], and [tex]\rm NH_4F[/tex].

For more information about ionic and covalent compounds, refer to the link:

https://brainly.com/question/10748806

Answer: It just haven’t been discovered yet

Explanation:

Because the periodic table was discovered long ago some elements haven’t been discovered thats why it maybe has 3 columns

Explanation:

ano po topic nyo para maayos sagut

The heat of vaporization of CH3CN is obtained from the question as 25 KJ/mol.

We can obtain the number of moles from;

PV = nRT

P = 1 atm

V = 1.17 L

n = ?

R = 0.082 atm LK-1mol-1

T = 81.6 °C + 273 = 354.6 K

n = PV/RT

Substituting values;

n =  1 atm × 1.17 L/0.082 atm LK-1mol-1 × 354.6 K

n = 0.04 moles

Using; q = n·ΔHv

q = Heat absorbed

n = number of moles

Hv  = Heat of vaporization

ΔHv = q/n

ΔHv = 1.00 × 10^3/0.04

ΔHv = 25 KJ/mol

Learn more: https://brainly.com/question/2510654

Answer:

I don't know what you're saying cuz give me the brainless answer please

Answer:

5.01 moles

Explanation:

Calculate the number of moles in 400g of Tio2

first, write the formulas correctly

Calculate the number of moles in 400g of TiO2

capitalize the first letter of your elements

the molar mass of TiO2 is

47.88 +2X16.00 =47.88  +32.00 = 79.88 gm/mole

(to 3 sig fig = 79.9 gm/mole

400 gm/79.9 gm/mole = 400/79.9 mole gm/gm =

400/79.9 moles = 5.01 moles

Answer:

I want to say (A) but i also want to say (C) but i can be wrong. most likely (C)

Explanation:

hope this helps lol and have a great day

Answer:

honestly this is kind of an opinionanated question because some people think that the vaccine dosen't work. Like I think that, but some other people might think differently so im gonna go with answer c.

Explanation:

Answer:

a because mass is converted into weight

Answer:

Melting and evaporation both represent changes in matter that involve behavior at the molecular level.

Answer:

well both disappear over time

Explanation:

Answer:

Mark me as brainlest

Explanation:

Microorganisms present in our body Re viruses, bacteria, fungi, algae, and protozoa among which most of them cause immense benefits to the body. There are some harmful microorganisms too known as pathogens which cause disease and cause a threat to all existing life forms of the earth which can result in death at times.

Answer:

An example of microorganisms acting in a harmful way is a bacteria spoiling food.

Answer:Cl2

Explanation:each gas is 1 gm and has the same P andT. The gas with the highest molar mass will have the lowest volume with least moles. Cl2 wins the prize

Answer:

zzxdczxc V

Explanation:

Answer:

Covalent bond

Explanation:

All the characteristics of a Covalent bond are being described.

When, a substance boils at 45degree C. Then, the most likely bond type for the given substance is a covalent bond. Option A is correct.

Liquid at Room Temperature: The fact that the substance is a liquid at room temperature suggests that the intermolecular forces holding its molecules together are relatively weak. Covalent compounds often have weaker intermolecular forces compared to ionic or metallic compounds.

Doesn't Conduct Electricity When Dissolved in Water: Covalent compounds, in general, do not conduct electricity when dissolved in water. This is because they do not dissociate into ions in solution, which is necessary for electrical conductivity. Ionic compounds, on the other hand, typically dissociate into ions and can conduct electricity in solution.

Boils at 45°C: The relatively low boiling point (45°C) indicates that the intermolecular forces in the substance are weak. Covalent compounds tend to have lower boiling points compared to ionic or metallic compounds, which often have stronger bonding.

Considering these factors, the substance is likely held together by covalent bonds, which involve the sharing of electrons between atoms. This allows for the formation of discrete molecules with weak forces between them.

Hence, A. is the correct option.

To know more about covalent bond here

https://brainly.com/question/19382448

#SPJ3

--The given question is incomplete, the complete question is

"The substance is a liquid at room temperature.-When you dissolve it into water, it doesn't conduct electricity.-The substance boils at 45 oC. Which is the most likely bond type for this substance? Choices: A) Covalent bond B) Metallic bond C) Ionic bond D) Hydrogen bonding E) Cation-pi bond."--

Answer:

Non-redox, double displacement

Explanation:

it's the only answer that have double displacement

tell me if it was right

Answer:

Explanation:

1.08kg/50.5 cm^3(1000g/kg)=21.386 g/cm^3

Answer:

[tex]\boxed {\boxed {\sf 21.4 \ g/cm^3}}[/tex]

Explanation:

We are asked to find the density of an object.

The density of a substance is its mass per unit volume. It is calculated by dividing the mass by the volume.

[tex]\rho= \frac{m}{v}[/tex]

The mass of the object is 1.08 kilograms. The object displaced 50.50 cubic centimeters of water, so this value is its volume.

We are asked to give the density in grams per cubic centimeter, so we must convert the mass. There are 1000 grams in 1 kilogram. Set up a conversion factor.

[tex]\frac {1000 \ g}{1 \ kg}[/tex]

Multiply by the given mass: 1.08 kg

[tex]1.08\ kg *\frac{1000 \ g }{ 1\ kg}[/tex]

The units of kilograms cancel.

[tex]1.08*\frac{1000 \ g }{1}[/tex]

[tex]1.08*{1000 \ g } = 1080 \ g[/tex]

Now we know the mass in grams and the volume:

Substitute the values into the density formula.

[tex]\rho= \frac{1080 \ g }{50.50 \ cm^3}[/tex]

Divide.

[tex]\rho= 21.3861386 \ g/cm^3[/tex]

The original measurements of mass and density have 3 and 4 significant figures. Our answer must have the least number of significant figures, or 3.

For the number we found, that is the tenths place. The 8 in the hundredth place tells us to round the 3 in the tenths place up to a 4.

[tex]\rho \approx 21.4 \ g/cm^3[/tex]

The density of the object is approximately 21.4 grams per cubic centimeter.

Answer:

Explanation:

1 Electrolytes, particularly sodium, help maintain fluid balance through osmosis. Osmosis is a process where water moves through the wall of a cell membrane from a dilute solution (more water and fewer electrolytes) toward a more concentrated solution (less water and more electrolytes).

2 acid base balance in the body

our body's pH balance, also referred to as its acid-base balance, is the level of acids and bases in your blood at which your body functions best. The human body is built to naturally maintain a healthy balance of acidity and alkalinity. The lungs and kidneys play a key role in this process.

Answer:

A, drawing a conclusion

Explanation:

Answer:

boi i need the choices idiot

Explanation:

Nobody can add an answer without context.

But if this helps,

"Vaporization of an element or compound is a phase transition from the liquid phase to vapour. There are two types of vaporization: evaporation and boiling. Evaporation is a surface phenomenon, whereas boiling is a bulk phenomenon." - Wikipedia

https://en.wikipedia.org/wiki/Vaporization

Answer:

1G

Explanation:

The names of the substances for the reactants in the chemical equation 2H₂ + O₂ → 2H₂O are; Hydrogen gas (H₂) and Oxygen gas (O₂). Option A and C is correct.

Hydrogen gas (H₂) - This is the molecular form of hydrogen, consisting of two hydrogen atoms bonded together.

Oxygen gas (O₂) - This is the molecular form of oxygen, consisting of two oxygen atoms bonded together.

In a chemical equation, the reactants are the substances that undergo a chemical reaction to form new products. In this case, the reactants are hydrogen gas (H₂) and oxygen gas (O₂). The arrow (→) in the equation represents the direction of the reaction, indicating that hydrogen gas and oxygen gas react to form water (H₂O).

The coefficient 2 in front of H₂ and H₂O indicates that two molecules of hydrogen gas react with one molecule of oxygen gas to produce two molecules of water. The balanced chemical equation shows the stoichiometry of the reaction, indicating the number of molecules of each reactant and product involved in the reaction.

Hence, A. C. is the correct option.

To know more about Hydrogen gas here

https://brainly.com/question/32820779

#SPJ3

--The given question is incomplete, the complete question is

"Choose the names of the substances for reactants of the equation

2H₂ + O₂ → 2H₂O Options; A) Hydrogen B) Water C) Oxygen."--

The average mass of a marble can be determined by dividing the total mass of the marbles by the total number of marbles: average mass of a marble.

To find the density of any object, you need to know the Mass (grams) of the object, and its Volume (measured in mL or cm³). Divide the mass by the volume in order to get an object's Density.

Use the formula p=m/V, or density (p) is equal to mass (m) divided by volume (V).

To determine the density of a marble, we must know its mass and volume.

In order to determine the density of any substance we need to know its mass and volume.

Let's understand "Density".

Learn more:

brainly.com/question/17780219