Solve this math problem below

555 centigrams = 55.5 GRAMS

The metric system is based on multiples of 10, where each unit is 10 times larger or smaller than the previous one. In this system, "centi-" means one hundredth, so 1 centigram is one hundredth of a gram. Therefore, 555 centigrams is equal to 5.55 grams (since there are 100 centigrams in 1 gram).

On the other hand, "deci-" means one-tenth, so 1 decigram is one-tenth of a gram. Therefore, 555 centigrams is also equal to 55.5 decigrams (since there are 10 decigrams in 1 gram).

In summary, 555 centigrams is equal to:

55.5 decigrams

5.55 grams

555 centigrams is equal to = 55.5 decigrams

1 cg is equal to 10 dg, therefore 555 cg is equivalent to 55.5 dg.

1 Centigram = 1 x 10 = 10 Milligrams

555 Centigrams = 555 / 10 = 55.5 Decigrams

Tonia's situation can be modeled through a seasonal function, specifically a periodic function. This is because her sales and profits vary over time in a predictable pattern that repeats each year.

A seasonal function is a type of mathematical function that models a repeating pattern or a cyclical behavior that occurs over a fixed interval of time. Seasonal functions are used to analyze and forecast patterns in time series data that have a clear seasonality or periodicity

One common type of periodic function is a sine or cosine function. These functions oscillate back and forth between two extreme values in a smooth, periodic way. In Tonia's case, her sales and profits might be modeled as a sine or cosine function that oscillates between high values during the summer months and lower values during the winter months.

Other types of periodic functions include sawtooth functions and square wave functions, which have a more abrupt change between their high and low values.

Learn more about seasonal function at https://brainly.com/question/30984532

#SPJ1

On the material was used, the 100-meter flex of 14 AWA wire's entirety would range. If the silver and copper cable are in 0.0013 and 0.0014, aluminum spans 0.002 and 0.004, and iron is between 0.007 and 0.008

A force that works to slow something down or halt its progress: The air/wind drag slowed the vehicle down. the extent to which a material obstructs an electric charge from passing through it: There is little reluctance in copper.

The resistance (R) of a wire is given by the formula:

R = (ρ x L) / A

where:

ρ is the resistivity of the material

L is the length of the wire

A is the wire's cross-sectional size.

The cross-sectional area (A) of a wire with diameter d is given by the formula:

A = π x (d/2)²

where pi is a number in mathematics. (approximately equal to 3.14).

For a 100-meter length of 14 AWA wire with diameter 0.163 cm, we first need to convert the diameter to meters:

d = 0.163 cm = 0.00163 m

The cross-sectional area of the wire is then:

A = π x (0.00163/2)² = 2.087 x 10⁻⁶ m²

Using this value of A and the given resistivities, we can calculate the resistance for each material:

For copper:

R_copper = (1.67 x 10⁻⁸ O•m x 100 m) / (2.087 x 10⁻⁶ m²) = 0.00134 Ω

For silver:

R_silver = (1.59 x 10⁻⁸ O•m x 100 m) / (2.087 x 10⁻⁶ m²) = 0.00128 Ω

For aluminum:

R_aluminum = (2.65 x 10⁻⁸ O•m x 100 m) / (2.087 x 10⁶ m²) = 0.00199 Ω

For iron:

R_iron = (9.71 x 10⁻⁸ O•m x 100 m) / (2.087 x 10⁻⁶ m²) = 0.00735 Ω

Therefore, the overall resistance of the 100-meter length of 14 AWA wire made of these materials would depend on which material was used. If copper or silver were used, the resistance would be relatively low, around 0.0013-0.0014 Ω. If aluminum were used, the resistance would be higher, around 0.002 Ω. If iron were used, the resistance would be much higher, around 0.007 Ω.

To know more about Resistance visit:

https://brainly.com/question/17563681

#SPJ1

The required ratio of the surface area of the given pyramids is (A) 3:2.

A ratio can be used to show a relationship or to compare two numbers of the same type.

To compare things of the same type, ratios are utilized.

We might use a ratio, for example, to compare the proportion of boys to girls in your class.

If b is not equal to 0, an ordered pair of numbers a and b, denoted as a / b, is a ratio.

A proportion is an equation that equalizes two ratios.

For illustration, the ratio may be expressed as follows: 1: 3 in the case of 1 boy and 3 girls (for every one boy there are 3 girls)

So, the given surface area is:

- 21 in

- 14 in

Now, calculate the ratio as:

= 21/14

= 3/2

= 3:2

Therefore, the required ratio of the surface area of the given pyramids is (A) 3:2.

Know more about ratios here:

https://brainly.com/question/2328454

#SPJ1

The equations of straight lines are \hat{y} = 2h, \hat{y} = 23r + 4 and \hat{y}= 2s + 3t. Option(A),(B) and (F) are correct.

A line in the coordinate plane can be described with the help of a linear equation, that is, an equation that has a first-degree expression, like y = 2x – 3.

There are many ways to put the equation of a line in the form y = mx + b,

where m is the slope and

b is the y-intercept,

but they all require the use of algebraic properties of equations, such as addition, subtraction, multiplication, division, and substitution.

The equations of straight lines among the following are:  \hat{y} = 2h,  \hat{y} = 23r + 4 and \hat{y}= 2s + 3t

Hence, the correct options are:Option A: \hat{y} = 2h , Option B: \hat{y} = 23r + 4  and Option F: \hat{y}= 2s + 3t.

To practice more questions about linear equations:

https://brainly.com/question/26310043

#SPJ11

The resultant value of the given expression 4(x²+3)-2y is 157 respectively.

The concept of algebraic expressions is the use of letters or alphabets to represent numbers without providing their precise values.

We learned how to express an unknown value using letters like x, y, and z in the fundamentals of algebra.

Here, we refer to these letters as variables.

An expression is a group of words with operators between them.

The equation is the union of two expressions joined by the symbol "equal to" (=).

For instance, 3x-8. Ex: 3x-8 = 16.

So, the value would be:

4(x²+3)-2y

Insert values as follows:

=4((-6)²+3)-2(-1/2)

=4(36+3)+1=157

Therefore, the resultant value of the given expression 4(x²+3)-2y is 157 respectively.

Know more about expressions here:

https://brainly.com/question/1859113

#SPJ1

Complete question:

What is the value of this expression when x= -6 and y= -1/2? 4(x2+3)-2y

The area is 49 square yards.

The percentiles for the standard normal distribution

a. 0.93

b. -0.88

c. 0.67

d. -0.65

e. -1.28

To determine the percentiles for the standard normal distribution, use the standard normal distribution table. Percentiles for standard normal distribution are given by the standard normal distribution table.

The standard normal distribution is a special type of normal distribution with a mean of 0 and a variance of 1.

Step 1: Write down the given percentiles as a decimal and round to two decimal places.

For example, for the 81st percentile, 0.81 will be used.

Step 2: Use the standard normal distribution table to find the corresponding z-score.

Step 3: Round off the obtained answer to two decimal places.

a) 81st percentile:

The area to the left of the z-score is 0.81.

The corresponding z-score is 0.93.

Hence, the 81st percentile for the standard normal distribution is 0.93.

b) 19th percentile:

The area to the left of the z-score is 0.19.

The corresponding z-score is -0.88.

Hence, the 19th percentile for the standard normal distribution is -0.88.

c) 76th percentile:

The area to the left of the z-score is 0.76.

The corresponding z-score is 0.67.

Hence, the 76th percentile for the standard normal distribution is 0.67.

d) 24th percentile:

The area to the left of the z-score is 0.24.

The corresponding z-score is -0.65.

Hence, the 24th percentile for the standard normal distribution is -0.65.

e) 10th percentile:

The area to the left of the z-score is 0.10.

The corresponding z-score is -1.28.

Hence, the 10th percentile for the standard normal distribution is -1.28.

To know more about the "standard normal distribution": https://brainly.com/question/27275125

#SPJ11

Answer:

436g

Step-by-step explanation:

1kg=1000g

3kg=3000g

3000+52=3052

3052÷7=436

As the demand for tobacco is inelastic so the consumers are the group who are less responsive to a higher price as an outcome of it the consumers will have to bear the largest share of the tobacco tax.

This inelasticity of demand will lead to only a small decline in the quantity demanded after the tax have been leived , therefore the deadloss weight will be in really small degree. the percentage increase in price of any amount will overcome a smaller decline in the quantity which eventually would lead to a rise in the tax revenue collection.

Inelasticity of demand refers to the degree to which the quantity demanded of a particular good or service changes in response to a change in its price. When demand is inelastic, a change in price will result in a proportionally smaller change in quantity demanded. This is typically the case for goods or services that are considered necessities or have few substitutes available.

For example, if the price of insulin, a life-saving medication for diabetics, increases by 10%, it is unlikely that the quantity demanded will decrease by 10%. People with diabetes require insulin to manage their condition, and there are few substitutes available, so they are willing to pay a higher price to maintain their health.

To learn more about Inelasticity of demand visit here:

brainly.com/question/30103518

#SPJ4

Complete Question: -

Suppose the supply of tobacco is elastic and the demand for tobacco is inelastic. If an excise tax is levied on the suppliers of tobacco, will the incidence fall mostly on consumers or mostly on producers? Will there be a large amount or small amount of deadweight loss? Will tax revenue from the tobacco tax fall or rise?

If all other factors are held constant, decreasing the significance level results in an increase in the probability of a type II error. This is true. we can say that the probability of making a type II error increases when the significance level is lowered.

What is a type II error? In hypothesis testing, a type II error occurs when a false null hypothesis is not rejected. When there is a real effect and the null hypothesis is false, this happens. It's a mistake that occurs when a researcher fails to reject a false null hypothesis.

A false negative is another term for a type II error. The power of the test, the size of the sample, the confidence level, and the effect size are all factors that influence the probability of making a type II error. Only if we decrease the significance level can the probability of a type II error be increased.

What is the significance level? The significance level is also known as alpha. It is the probability of rejecting a null hypothesis when it is true. It is represented by α. It is usually set at 0.05 or 0.01 in most studies. When the significance level is lowered, the probability of making a type I error decreases, but the probability of making a type II error increases. Therefore, we can say that the probability of making a type II error increases when the significance level is lowered.

For more such questions on type II error

https://brainly.com/question/30403884

#SPJ11

As per the unitary method, Arun's mother would be 36 years old if Arun is 3 years old.

Let Arun's age be m years.

Let Arun's mother's age be n years.

From the problem statement, we know that n = 4m + 6. This means that Arun's mother's age is directly proportional to Arun's age, with a constant ratio of 4 and a constant difference of 6.

To solve for n, we can use the unitary method. We can set up a proportionality between the two ages as follows:

n / m = (4m + 6) / m

To solve for n, we can cross-multiply to get:

n = m x (4m + 6)

Expanding the right-hand side of the equation, we get:

n = 4m² + 6m

Therefore, Arun's mother's age is 4m² + 6m years. We can simplify this expression by factoring out 2m:

n = 2m(2m + 3)

This gives us a simpler form of the equation for Arun's mother's age. To find her age, we simply substitute Arun's age (m) into this expression and simplify.

If Arun is 3 years old (m = 15), then his mother's age would be:

n = 2m(2m + 3) = 2(3)(2(3) + 3) = 2(3)(6) = 36

To know more about unitary method here

https://brainly.com/question/28276953

#SPJ4

The required equation of straight line is y = 0.03x + 20.

What is an equation?

A mathematical equation states that two quantities or values are identical. Equations are used when more than one factor has to be examined in order to fully understand or explain a situation.

The general form of an equation is y = mx + b, where m is the slope of equation and b is a constant.

From the given graph we get 2 points.

i.e., (0, 20) and (2000, 80)

Slope of the line is

[tex]m=\frac{80-20}{2000-0}\\\ \ = \frac{60}{2000}\\ = \frac{6}{200} \\= \frac{3}{100}[/tex]

Then the equation will be

[tex]y-20=\frac{3}{100}(x-0)\\\Rightarrow y-20=0.03x\\\Rightarrow y-0.03x-20=0\\\Rightarrow y = 0.03x+20[/tex]

Therefore, the required equation is y = 0.03x + 20, calculating with the help of given graph.

Learn more about equation from the given link

brainly.com/question/10413253

#SPJ1

Answer:

Step-by-step explanation:

9m = 7m + 4

9m - 7m = 4

2m = 4

m = 2

----------------------------------

check

9 x 2 = 7 x 2 + 4

18 = 18

this answer is good

n + 6 = 2n - 1

n + 7 = 2n

7 = n

-----------------------------------

7 + 6 = 2 x 7 - 1

13 = 13

this answer is good

Answer:15 percent

Step-by-step explanation:

In the following question, among the various parts to solve- a) the probability that the individual waits more than 7 minutes is 0.3. b)the probability that the individual waits between 2 and 7 minutes is 0.5.

a) The probability that an individual will wait more than 7 minutes can be found as follows:

Given that the waiting time of an individual is a continuous uniform distribution and that a bus arrives at the bus stop every 10 minutes.Since the waiting time is a continuous uniform distribution, the probability density function (PDF) can be given as:fX(x) = 1/(b-a)where a = 0 and b = 10.

Hence the PDF of the waiting time can be given as:fX(x) = 1/10The probability that an individual waits more than 7 minutes can be obtained using the complementary probability. This is given by:P(X > 7) = 1 - P(X ≤ 7)The probability that X ≤ 7 can be obtained using the cumulative distribution function (CDF), which is given as:FX(x) = P(X ≤ x) = ∫fX(t) dtwhere x ∈ [a,b].In this case, the CDF of the waiting time is given as:FX(x) = ∫0x fX(t) dt= ∫07 1/10 dt + ∫710 1/10 dt= [t/10]7 + [t/10]10= 7/10Using this, the probability that an individual waits more than 7 minutes is:P(X > 7) = 1 - P(X ≤ 7)= 1 - 7/10= 3/10= 0.3So, the probability that the individual waits more than 7 minutes is 0.3.

b) The probability that the individual waits between 2 and 7 minutes can be calculated as follows:P(2 < X < 7) = P(X < 7) - P(X < 2)Since the waiting time is a continuous uniform distribution, the PDF can be given as:fX(x) = 1/10Using the CDF of X, we can obtain:P(X < 7) = FX(7) = (7 - 0)/10 = 0.7P(X < 2) = FX(2) = (2 - 0)/10 = 0.2Therefore, P(2 < X < 7) = 0.7 - 0.2 = 0.5So, the probability that the individual waits between 2 and 7 minutes is 0.5.

For more such questions on probability

https://brainly.com/question/24756209

#SPJ11


The percentage of customers who do not purchase clubs or balls is 0.66 or 66%.

Ten percent of customers who walk into a golf store purchase a golf club and 30% of customers purchase golf balls. Six percent of customers purchase both clubs and balls. The percentage of customers who do not purchase clubs or balls is 0.66.

Given that, The percentage of customers who purchase golf clubs = 10%The percentage of customers who purchase golf balls = 30%The percentage of customers who purchase both clubs and balls = 6%To find out the percentage of customers who do not purchase clubs or balls, we have to subtract the percentage of customers who purchase either clubs or balls or both from 100%.

Percentage of customers who purchase either clubs or balls or both = 10% + 30% - 6% = 34% Percentage of customers who do not purchase clubs or balls = 100% - 34% = 66%.

Learn more about Percentage

brainly.com/question/29306119

#SPJ11

Answer:

She will draw 120 times for a red marble

Step-by-step explanation:

Cindy and tom, working together, can rake the yard in 8 hours. Working alone, Tom takes twice as long as Cindy, it takes Cindy to rake the yard 2 hours

To find the time it takes Cindy to rake the yard alone, let's use the following steps:Let x be the time taken by Cindy to rake the yard alone . Then the time taken by Tom to rake the yard alone will be 2xIt is given that Cindy and Tom can rake the yard in 8 hours when they work together.

Using the formula for working together, we get:[tex]\[\frac{1}{x} + \frac{1}{2x} = \frac{1}{8}\][/tex] Multiplying the equation by the least common multiple of the denominators, we get:[tex]\[16 + 8 = 2x\][/tex] Simplifying, we get:[tex]\[2x = 24\][/tex]Dividing both sides by 2, we get:[tex]\[x = 12\][/tex]Therefore, it takes Cindy 12 hours to rake the yard alone.

See more about calculating the working time at: https://brainly.com/question/20290932

#SPJ11

Answer:

576 books.

Step-by-step explanation:

134+254+188=576 books in total.

Hopefully this helps!

Answer:

Isiah Thomas

Step-by-step explanation:

I amazing fact

Answer:

the correct answer is 4

Step-by-step explanation:

yea sorry i don’t know step-by-step

The solution for X in equation 30=5(X+5)X is X= 1.

To solve the equation, we can start by distributing the 5 on the right-hand side of the equation, which gives us:

30 = 5X + 25X

Combining like terms, we get:

30 = 30X

Dividing both sides by 30, we get:

X = 1

However, we need to check whether this value satisfies the original equation. Plugging X=1 into the equation gives us:

30 = 5(1+5)(1)

30 = 5(6)

30 = 30

Therefore, the only valid solution is X=1.

Learn more about Equations:

https://brainly.com/question/28871326
#SPJ4

then the area would be: [tex]Area=\frac{(a+b)}{2*h}[/tex] = (16 ft + 10 ft)/2 x 15 ft = 150 ft²

Area is a mathematical term that refers to the measurement of the size or extent of a two-dimensional region or surface. It is typically expressed in square units, such as square meters (m²), square centimeters (cm²), square feet (ft²), or square inches (in²). The area of a shape is determined by multiplying the length and width of the shape in the case of a rectangle or square, or by using more complex formulas for irregular shapes such as circles, triangles, or polygons. The concept of area is important in various fields such as mathematics, geometry, physics, engineering, and architecture, among others.

by the question.

. If we assume that these are the dimensions of a rectangle, then the area would be:

Area = length x width = 20 ft x 12 ft = 240 ft²

However, if we assume that the area is a trapezoid with a height of 15 ft, and the parallel sides of length 16 ft and 10 ft.

To learn more about height:

https://brainly.com/question/10726356

#SPJ1

Answer: 1.2 miles

Step-by-step explanation:

1 hour = 60 min

60 x 0.02 = 1.2         1 minute and 20 seconds has elapsed

60 miles/ every 60 minutes or 1 mile a minute

1 x 1.2 = 1.2

she has traveled 1.2 miles

Answer: The answer is 120 mph (miles per hour)

Step-by-step explanation:

The one thing you need to do is to figure out how many mph did Ella drive for 2 hours.

So, you need to do 60 x 2, and you will get the answer 120.

And there's your answer!

The equation in standard form for the circle with center (5,0) passing through (5, 9/2) is 4x² + 4y² - 40x + 19 = 0

Given that

Center = (5, 0)

Point on the circle = (5. 9/2)

The equation of a circle can be expressed as

(x - a)² + (y - b)² = r²

Where

Center = (a, b)

Radius = r

So, we have

(x - 5)² + (y - 0)² = r²

Calculating the radius, we have

(5 - 5)² + (9/2 - 0)² = r²

Evaluate

r = 9/2

So, we have

(x - 5)² + (y - 0)² = (9/2)²

Expand

x² - 10x + 25 + y² = 81/4

Multiply through by 4

4x² - 40x + 100 + 4y² = 81

So, we have

4x² + 4y² - 40x + 19 = 0

Hence, the equation is 4x² + 4y² - 40x + 19 = 0

Read more about circle equation at

https://brainly.com/question/1506955

#SPJ1

The monthly payment required to pay off a loan of $140,000 at 7% interest would be $776.89 is the correct statement(A).

The statement given is describing a function that relates the monthly payment R of a 25-year variable-rate mortgage loan to the loan amount A and the current interest rate i.

The given values are R = $776.89 and A = $140,000, with an interest rate of 7%. This means that the monthly payment required to pay off a loan of $140,000 at 7% interest would be $776.89.

However, the other statements are incorrect interpretations. For instance, the statement "For a loan of $140,000 at 7.7689% interest, 700 monthly payments would be required to pay off the loan" is incorrect.

This is because the number of payments required to pay off a loan depends not only on the loan amount and interest rate, but also on the term of the loan.

Similarly, the statement "For a loan of $140,000 at 7% interest, 776.89 monthly payments would be required to pay off the loan" is also incorrect, as the number of payments required would be determined by the term of the loan.

Finally, the statement "For a loan of $140,000 at 7.7689% interest, the monthly payment is $700" is also incorrect. This is because, for the given loan amount and interest rate, the monthly payment required would be $776.89, as calculated above.

For more questions like Interest click the link below:

https://brainly.com/question/13324776

#SPJ11

To solve the question asked, you can say:  So, the other angle of the figure is 49 degree.

In Euclidean geometry, an angle is a shape consisting of two rays, known as sides of the angle, that meet at a central point called the vertex of the angle. Two rays can be combined to form an angle in the plane in which they are placed. Angles also occur when two planes collide. These are called dihedral angles. An angle in planar geometry is a possible configuration of two rays or lines that share a common endpoint. The English word "angle" comes from the Latin word "angulus" which means "horn". A vertex is a point where two rays meet, also called a corner edge.  

here the given angles are as -

107 + (180-156) + x = 180

as total angle sum of a triangle is 180

so,

x = 180 - 131

x = 49

So, the other angle of the figure is 49 degree.

To know more about angles visit:

https://brainly.com/question/14569348

#SPJ1

The two remaining angles are 58°, and the length of the third side of the triangle is 6.5 inch.

In order to determine the other two angles of each triangle as well as the length of the third side, we need to use the Cosine Rule. According to the Cosine Rule, for any triangle with sides of length a, b, and c, and angles of A, B, and C, the following equation holds:

[tex]c^2 = a^2 + b^2 - 2ab cos(C)[/tex]

For the first triangle, we are given that the side of length 5 is adjacent to an angle of 61°. Therefore, a = 5, C = 61°. Using the information provided, we can also determine that b = 4.8. Substituting these values into the Cosine Rule equation, we get:

[tex]c^2 = (5)^2 + (4.8)^2 - 2(5)(4.8) cos(61°)[/tex]

We can solve this equation to get c = 6.5. Therefore, the length of the third side in the first triangle is 6.5. Additionally, we can use the Triangle Angle Sum theorem to determine the other two angles. According to this theorem, the sum of the three angles of a triangle is 180°. Therefore, for the first triangle, the two remaining angles are 180 - 61 - (180 - 61) = 58°.

For the second triangle, we use the same process, but with the given side lengths reversed. That is, we set a = 4.8, b = 5, and C = 61°. Again, substituting these values into the Cosine Rule equation, we get:

[tex]c^2 = (4.8)^2 + (5)^2 - 2(4.8)(5) cos(61°)[/tex]

We can solve this equation to get c = 6.5. Therefore, the length of the third side in the second triangle is also 6.5. We can use the Triangle Angle Sum theorem again to determine the other two angles. Again, for the second triangle, the two remaining angles are 180 - 61 - (180 - 61) = 58°.

In conclusion, for each triangle, the two remaining angles are 58°, and the length of the third side is 6.5 inch.

Learn more about cosine rule: https://brainly.com/question/21568111

#SPJ11

After the time of seven hours, the cream pie would have approximately 768 S. aureus cells after 7 hours with a generation time of 60 minutes.

Six S. aureus cells have been accidentally inoculated into a cream pie. S. aureus has a generation time of 60 minutes. S. aureus is a pathogenic bacterium found in the environment, as well as on the skin, and in the upper respiratory tract.

The generation time of this bacterium is 60 minutes, meaning that a single bacterium can produce two new cells in 60 minutes.

If there are 6 S. aureus cells in a cream pie, the number of bacteria will continue to increase as time passes.

The number of generations (n) in seven hours is calculated as:

n = t/g

n = 7 hours × 60 minutes/hour/60 minutes/generation = 7 generations

The number of cells in the cream pie after 7 hours is calculated as :

N = N₀ × 2ⁿ

N = 6 cells × 2⁷

N = 768 cells

Therefore, after seven hours, the cream pie would have approximately 768 S. aureus cells.

Learn more about Number of generations here:

https://brainly.com/question/17045618

#SPJ11