sodium plus chloroform sodium chloride friends in the balance equation home​

Answer:

The answer would be: An atom’s nucleus occupies very little of the atom’s volume but contains most of its mass

Explanation:

The atomic nucleus is the small, dense region consisting of protons and neutrons at the center of an atom.

Almost all of the mass of an atom is located in the nucleus, with a very small contribution from the electron cloud.

Refer to https://en.wikipedia.org/wiki/Atomic_nucleus for further understanding

Answer:

5

Explanation:

The atomic number is the number of protons in an atom. Protons are the positively charged particles in the nucleus. The number of protons define the identity of an element. An element with 5 protons is Boron, no matter how many neutrons may be present.

The atomic number of the atom shown in the diagram is 5.

The atomic number of an element refers to the number of protons in the nucleus of its atoms. It uniquely identifies an element and determines its chemical properties.

In the diagram, there are 5 proton numbers in the nucleus of the atom. In other words, this means that the atomic number of the atom is 5.

More on atomic numbers can be found here: https://brainly.com/question/14190064

#SPJ3

Answer:

The answer will be this 30g/cm3

Answer:

B

Explanation:

Answer:

0.7602 g/L

Explanation:

We'll begin by calculating the molar mass of NH₃. This can be obtained as follow:

Molar mass of NH₃ = 14.01 + (3×1.01)

= 14.01 + 3.03

= 17.04 g/mol

Finally, we shall determine the density of ammonia, NH₃. This can be obtained as follow:

Temperature (T) = 273 K

Pressure (P) = 1 atm

Molar mass of NH₃ (M) = 17.04 g/mol

Gas constant (R) = 0.0821 atm.L/Kmol

Density (D) =?

D = PM / RT

D = (1 × 17.04) / (0.0821 × 273)

D = 17.04 / 22.4133

D = 0.7602 g/L

Answer:

It is A

Explanation:

Answer:

Dùng nam chân hút đc bột sắt ra khỏi hỗn hợp

Bột gỗ và bột nhôm thì bột gỗ tan trong nước còn bột nhôm thì không

Explanation:

Answer:

cooling a liquid

Explanation:

Temperature is lowered and the energy of molecules, and therefore number of available configuration , is lowered

The thermal energy present in the system for the product formation is entropy. Cooling a liquid can decrease the entropy of the thermodynamic system. Thus, option C is correct.

Entropy is the energy and the heat present in the reactant of the thermodynamic system that is associated with the randomness and disorder of the particle matter in the reaction system.

Entropy is dependent on factors like dissolution, temperature, randomness, kinetic energy, etc. The entropy increases with an increase in the dissolution and tempearture.

The process of cooling liquid lowers the temperature which in turn decreases the kinetic energy and randomness of the molecules and at last, the entropy decreases.

Therefore, the cooling of the liquid decreases the entropy.

Learn more about entropy here:

https://brainly.com/question/28081833

#SPJ5

Answer:

[tex]400 \div 6 \\ \\ [/tex]

Answer:

a white crystalline substance that gives seawater it characteristics of taste

Explanation:

your answer is Kelvin because it is the SI unit of temperature

Answer:

An alcohol with three other carbons attached to the carbon with the hydroxyl group

An alcohol with two other carbons attached to the carbon with the hydroxyl group

Explanation:

If we look at 3-ethyl-3-pentanol, we will discover that the compound is a tertiary alcohol. That is, the carbon atom bearing the hydroxyl group is attached to three other carbon atoms as gown in image 1 attached.

For 2-hexanol, the carbon atom bearing the hydroxyl group is attached to two other carbon atoms hence the alcohol is a secondary alcohol. The compound is shown in image 2 attached.

Answer:

the number of crickets in each container

Explanation:

to participate in the experiment you will have to know the crickets in the container

Answer:

C. The volume stays the same, but the shape changes to fit the new container.

Explanation:

It changes shape to fit the container since it's a liquid.

Answer:

A solution in which the maximum amount of solvent has been dissolved. Any more solute added will sit as crystals on the bottom of the container.

Explanation:

A solution in which the maximum amount of solvent has been dissolved. Any more solute added will sit as crystals on the bottom of the contain

er.

Answer:

is this true and false? then its true

Explanation:

Answer:

Fe(s) + H2SO4 (aq) ---> FeSO4 (s) + H2 (g)

Explanation:

Answer:

Explanation:

First of all, 1 mol of Sodium Sulphide has molecular mass of

S = 32

Na2 = 2*23 = 46

The formula of NaS is actually Na2S. It's molecular mass = 78

How many grams of Na2S are present

Grams present = 240 - 162 = 78 which is exactly 1 mol.

The remainder is water.

The molecular mass of water = 2 + 16 = 18

162 grams of water = 162/18 = 9 mols of water.

So the correct formula is Na2S*9H20

The correct answer is: It contains both an amino functional group and a carboxyl functional group. In a solution, the amino group can

decrease acidity, while the carboxyl group can increase acidity.

The carboxyl functional group is acidic while the amine group is basic.

In an amino acid, there are two functional groups;

The carboxyl functional group is acidic because it contains a replaceable or  ionizable hydrogen ion. The amine group on the other hand is capable of accepting a proton hence it is basic.

Therefore, In a solution, the amine group can  decrease acidity, while the carboxyl group can increase acidity.

https://brainly.com/question/15823799

Explanation:

The nitrogen dioxide is a covalent compound where one nitrogen is the central atom which is bonded to two oxygen atoms, where one oxygen atom is bonded by a single bond and other oxygen atom by a double bond.

Answer: colavent

Explanation:

Explanation:

A chemical bond is a lasting attraction between atoms, ions or molecules that enables the formation of chemical compounds. The bond may result from the electrostatic force of attraction between oppositely charged ions as in ionic bonds or through the sharing of electrons as in covalent bonds.

if you want please give me brainliest and sir

Answer:

Check Down

Explanation:

A chemical bond is a lasting attraction between atoms, ions or molecules that enables the formation of chemical compounds. The bond may result from the electrostatic force of attraction between oppositely charged ions as in ionic bonds or through the sharing of electrons as in covalent bond.

Answer:

Kinetic energy

Explanation:

Kinetic energy is the energy associated with an object's motion. It is mass and velocity dependent by a directly proportional relationship.

Potential energy is the energy associated with an object's position.

Thermal energy is the energy associated with heat addition or withdrawal.

Kinetic energy is the energy that a body possesses because of its movement, that is, it is the energy that arises when objects are in motion.

Therefore, we can conclude that kinetic energy is the energy produced by its movements that depends on its mass and speed.

Learn more about kinetic energy here: brainly.com/question/999862

Explanation:

Ca(OH) is a base

pOH = -Log[OH]

[OH] = 0.05

pOH = -Log(0.05)

pOH = 1.3

pH + pOH = 14

pH = 14 - pOH

pH = 14 - 2

pH = 12.7

Answer:

32.4°C

Explanation:

Consider the following expression:

P•V/T =P'•V'/T'

Where P and P' are respectively the initial and the final pressure, V and V's are respectively initial and final volume, and T and T' are respectively initial and final temperature.

We know that the pressure cannot change, so it means that P = P'

We also know that the volume must be increased in 20%, and if we multiply the volume by 1.2 is like increase it in 20%, so we can write that V' = 1.2•V, and changing a little more we can write that V'/V = 1.2

So let's do some maths:

P•V/T = P'•V'/T'

T'•P•V/T = P'•V'

T'•P•V = P'•V'•T

T'=P'•V'•T/P•V

We know that P'=P so the division is equal to 1:

T'= 1•V'•T/V

We also know that V'/V = 1.2, so:

T' = 1.2•T

And we know the value of T, it's 27, so now we just have to solve it:

T' = 1.2•27

T' = 32.4°C

Answer:

12 g

Explanation:

From the question given above, the following data were:

Number of atoms = 6.02×10²³ atoms

Mass of ₆C¹² =?

From Avogadro's hypothesis,

1 mole of any substance contains 6.02×10²³ atoms. This implies that 1 mole of ₆C¹² also contains 6.02×10²³ atoms i.e

1 mole of ₆C¹² = 6.02×10²³ atoms

Recall

From the period,

1 mole of ₆C¹² = 12 g

Thus,

12 g of ₆C¹² = 6.02×10²³ atoms

Therefore, 12 g of ₆C¹² contains 6.02×10²³ atoms

Answer:High density

Explanation:

The metal doesn't remains gas at room tempreture, it doesn't have brittleness property and it is not poor conductor of electricity .But, it has high density .

Hope, it would be correct.

Explanation:

The steps given in the question are incorrect.

Step 1 should be convert atoms to moles (n). Step 2 should be convert moles (n) to mass (m).

Step 1

Use dimensional analysis to convert the number of atoms to moles.

1 mole atoms = 6.022 × 10²³ atoms

n(Ag) = 2.3 × 10²⁴ Ag atoms × (1 mol Ag/6.022 × 10²³ Ag atoms) = 3.8193 mol Ag

Step 2

Convert the moles of Ag to mass.

mass (m) = moles (n) × molar mass (M)

n(Ag) = 3.8193 mol Ag

M(Ag) = atomic weight on the periodic table in g/mol = 107.868 g Ag/mol Ag

m(Ag) = 3.8193 mol × 107.868 g/mol = 412 g Ag = 410 g Ag rounded to two significant figures

The mass of 2.3 × 10²⁴ Ag atoms is approximately 410 g.

Answer:

[tex]\boxed {\boxed {\sf 3.8 \ moles \ of \ sulfur}}[/tex]

Explanation:

We are asked to convert a number of atoms to moles.

We can convert atoms to moles using Avogadro's Number, which is 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this problem, the particles are atoms of sulfur. There are 6.022 ×10²³ atoms of sulfur in 1 mole of sulfur.

We use dimensional analysis to convert atoms to moles. This involves setting up ratios. Use Avogadro's Number and the underlined information to make a ratio.

[tex]\frac {6.022 \times 10^{23} \ atoms \ S}{1 \ mol \ S}[/tex]

We are converting 2.3 ×10²⁴ atoms of sulfur to moles, so we multiply by this value.

[tex]2.3 \times 10^{24} \ atoms \ S *\frac {6.022 \times 10^{23} \ atoms \ S}{1 \ mol \ S}[/tex]

Flip the ratio. It is equivalent, but it allows the units of atoms of sulfur to cancel.

[tex]2.3 \times 10^{24} \ atoms \ S *\frac {1 \ mol \ S}{6.022 \times 10^{23} \ atoms \ S}[/tex]

[tex]2.3 \times 10^{24} *\frac {1 \ mol \ S}{6.022 \times 10^{23} }[/tex]

[tex]\frac {2.3 \times 10^{24} }{6.022 \times 10^{23} } \ mol \ S[/tex]

[tex]3.819329127 \ mol \ S[/tex]

The original measurement of atoms (2.3 ×10²⁴) has 2 significant figures, so our answer must have the same. For the number we calculated that is the tenths place. The 1 in the hundredths place to the right (3.819329127) tells us to leave the 8 in the tenths place (3.819329127).

[tex]3.8 \ mol \ S[/tex]

2.3 ×10²⁴ atoms of sulfur is equal to approximately 3.8 moles of sulfur.

Answer:

B

Explanation:

because Mg is stronger than Al

Answer:

1.717

Explanation: