Answer:
cemento potque es plano
If mass is the amount of MATTER present in the
object, will it be different on Earth and the moon?
No
Yes
Answer:
Yes it would be different on Earth and the moon
Answer:
yes
Explanation:
Two parallel conducting plates are separated by 12.0 cm, and one of them is taken to be at zero volts. (a) What is the magnitude of the electric field strength between them, if the potential 5.6 cm from the zero volt plate is 450 V
Answer:
-8.036 kV/m
Explanation:
The electric field E = -ΔV/Δx where ΔV = change in electric potential = V - V' where V = electric potential at x = 5.6 cm = 450 V and V' = electric potential at x = 0 cm, = 0 V . So, ΔV = V - V' = 450 V - 0 V = 450 V.
Δx = distance between the 0 V plate and the 450 V point = 5.6 cm = 0.056 m
So, E = -ΔV/Δx
Substituting the values of the variables into the equation, we have
E = -ΔV/Δx
E = -450 V/0.056 m
E = -8035.7 V/m
E = -8.0357 kV/m
E ≅ -8.036 kV/m
Since the electric field between two parallel conducting plates is constant, the electric field between the plates is E = -8.036 kV/m
a ship using an echo sounding device receives an echo from the bottom 0.8 seconds after the sound is emitted. if the velocity of sound in water is 1500m as what is the depth of water?
Answer: depth= 1875m
Explanation: divide t by 2 because its echo it will go and come back thats why we divide it with 2
Then apply formula Depth(d)=velocity (v)/time (t)
Putting values we get ,
d=1500/0.4
d=1875m
The work function for silver is 4.73 eV. (a) Convert the value of the work function from electron volts to joules.
Answer:
[tex]W=7.56\times 10^{-19}\ J[/tex]
Explanation:
Given that,
The work function for silver is 4.73 eV.
We need to find the value of the work function from electron volts to joules.
We know that,
[tex]1\ eV=1.6\times 10^{-19}\ J[/tex]
For 4.73 eV,
[tex]4.73\ eV=1.6\times 10^{-19}\times 4.73\\\\=7.56\times 10^{-19}\ J[/tex]
So, the work function for silver is [tex]7.56\times 10^{-19}\ J[/tex].
a ball is launched upward at an angle from the ground. which way does its acceleration point at the top?
For a ball that is launched upward at an angle from the ground, the direction of its acceleration at the top of the projectile curve is downwards.
Acceleration of the ball at the topAs the ball is projected upward its acceleration points upwards until the ball reaches the maximum height or top of the projectile path.
At the top of the projectile path, its acceleration start pointing downwards.
Thus, for a ball that is launched upward at an angle from the ground, the direction of its acceleration at the top of the projectile curve is downwards.
Learn more about downward acceleration here: https://brainly.com/question/22048837
#SPJ1
Answer:
vertical
Explanation:
An amoeba has 1.00 x 1016 protons and a net charge of 0.300 pC. Assuming there are 1.88 x 106 fewer electrons than protons, If you paired them up, what fraction of the protons would have no electrons
Answer:
The fraction of the protons would have no electrons [tex]=1.88\times 10^{-10}[/tex]
Explanation:
We are given that
Amoeba has total number of protons=[tex]1.00\times 10^{16}[/tex]
Net charge, Q=0.300pC
Electrons are fewer than protons=[tex]1.88\times 10^6[/tex]
We have to find the fraction of protons would have no electrons.
The fraction of the protons would have no electrons
=[tex]\frac{Fewer\;electrons}{Total\;protons}[/tex]
The fraction of the protons would have no electrons
=[tex]\frac{1.88\times 10^{6}}{1.00\times 10^{16}}[/tex]
[tex]=1.88\times 10^{-10}[/tex]
Hence, the fraction of the protons would have no electrons [tex]=1.88\times 10^{-10}[/tex]
In both the camera and the __________, light enters a narrow opening and is projected onto a photosensitive surface. Group of answer choices
Answer: The HUMAN EYE
Explanation:
The human eye is made up of different parts which ranges from controlling the amount of light that enters the eye to the focusing of the image that is formed. The camera is a device which is both mechanically and electronically operated which shares a number of similarities with the eye.
In the human eye, the IRIS helps to regulate the amount of rays passing through the pupil to the lens by either contracting or dilating in light or dark environment respectively. While in the camera, the DIAPHRAGM controls the amount of light entering the camera.
The PUPIL serves as the passage for light into the eye while in the camera, the APERTURE does the same.
The photosensitive surface in the eye is the YELLOW SPOT while in the camera, the photosensitive surface is the PHOTOGRAPHIC FILM.
The most successful types of plants on Earth are
Answer:
The angiosperms dominate Earth's surface and vegetation in more environments, particularly terrestrial habitats, than any other group of plants. As a result, angiosperms are the most important ultimate source of food for birds and mammals, including humans.
Explanation:
plz mark brainlest
How much heat is required to evaporate 0.15 kg of lead at 1750°C, the boiling point for lead? The heat of vaporization for lead is Lv = 871 × 103 J/kg.
Answer:
Heat required = mass× latent heat Q = 0.15 × 871 ×
The heat required to evaporate 0.15 kg of lead at 1750°C will be 130,650 J.
What is heat?The movement of energy from a hot to a cold item is characterized as heat. Heat energy flows from a hot material to a cold one.
This occurs because faster-vibrating molecules transmit their energy to slower-vibrating ones.
The given data in the problem is;
m is the mass of lead = 0.15 kg
T is the temperature = 1750°C,
The latent heat of vaporization for lead is, [tex]\rm L_V[/tex] = 871 × 10³ J/kg.
The heat is found as;
[tex]\rm Q= m \times L_V \\\\ \rm Q= 0.15 \times 871 \times 10^3 \\\\ Q=130,650 \ J[/tex]
Hence the heat required to evaporate 0.15 kg of lead at 1750°C will be 130,650 J.
To learn more about the heat refer to the link;
brainly.com/question/1429452
In an electromagnet, what produces the magnetic field?
A. Electric charges moving through a conducting wire.
B. Electric charges moving through the metal core.
C. The metal core within a coil of wire.
D. The magnetic field of a permanent magnet.
One type of atomic particle that is found in the nucleus does not contribute to
an element's atomic number. What are two characteristics of this type of
atomic particle?
Answer:
1) They are electrically neutral
2) They have slightly more weight than protons
Explanation:
The given atomic particle found in the nucleus has the following characteristics;
The location of the particle = The nucleus
The (numbers of the) particle does not contribute to (change) the atomic number of the element
The particles found within the nucleus of an atom are; Neutrons and protons
The particle within the nucleus that determines the atomic number = The number of protons
Therefore, the particle referenced in the question is the neutrons
The two characteristics of the neutron are;
1) The neutrons are neutral, electrically
2) Neutrons have slightly more weight than protons
3) Neutrons are magnetic
4) Neutrons are very small
5) Neutrons consist of three quarks; One 'Up', and two 'Down' quarks
Therefore, two characteristics of the particle are;
1) They are electrically neutral and 2) They are slightly heavier than protons.
Question 26 of 30
Which of the following is a type of mechanical wave?
Check all that apply.
A. Longitudinal
B. Surface
O C. Transverse
D. Electromagnetic
Answer:
Mechanical waves are A. Longitudinal and C. Transverse.
Explanation:
I hope this helps you.^_^
From class, weight is a measurement of the force of
acting on an object.
Friction
Normal
Gravity
Tension
Applied
Answer:
the answer is well known as gravity
When the E string of a guitar (frequency 330 Hz) is plucked, the sound intensity decreases by a factor of 2 after 4 s. Determine
Answer:
[tex]Q=50.3[/tex]
Explanation:
From the question we are told that:
Frequency [tex]F=330Hz[/tex]
Sound intensity drop [tex]I_d=2[/tex]
Time [tex]T=4s[/tex]
Therefore
Sound intensity Ratio
[tex]\frac{I}{I_x}=\frac{1}{2}[/tex]
Generally the equation for Sound intensity is mathematically given by
[tex]\frac{I}{I_x}=e^{-4\ \=t}[/tex]
[tex]\frac{1}{2}=e^{-4\ \=t}[/tex]
[tex]\=t =5.8s[/tex]
Generally the equation for Quality Factor is mathematically given by
[tex]Q=2 \pi\frac{E}{\triangle E}[/tex]
[tex]Q=2 \pi\frac{E}{\frac{E}{2*4}}[/tex]
[tex]Q=50.3[/tex]
When cars travel around a banked (curved) road at the optimum angle,the normal reaction force (n) can provide the necessary centripetal force without the need for a friction force. (a)Describe whar would happen to Optimum banking angle when radius doubles? (b)Describe what would happen to optimum angle when speed doubles? (c)A car negotiate a turn of radius 80cm.What is the optimum banking angle for this curve if the speed is to be equal to 12m/s?
Answer:
(a) The optimum banking Decreases
(b) The optimum banking Increases
(c) The optimum banking is approximately 86.88°
Explanation:
(a) The equation of motion on a banked road is given as follows;
[tex]v = \sqrt{R \cdot g \times \left(\dfrac{tan (\theta) + \mu}{1 - \mu \cdot tan (\theta) }\right) }[/tex]
For no friction, we have;
v = √(R·g·tan(θ))
Where;
R₁ = The radius of the road
g = The acceleration due to gravity ≈ 9.81 m/s² = Constant
θ₁ = The bank angle
μ = The coefficient pf friction = Constant
v = The vehicle's speed
If the radius doubles, for no friction, we have;
v² = R·g·(tan(θ))
tan(θ) = v²/(R·g)
Therefore, when the radius doubles, tan(θ) becomes smaller and therefore, the optimum banking angle θ decreases (becomes smaller)
(b) When the speed doubles, we have;
v₁ = 2·v
∴ tan(θ₁) = (v₁)²/(R·g) = 4·(v)²/(R·g) = 4·tan(θ)
When the speed doubles, tan(θ) increases and therefore, the optimum banking angle θ increases increases
(c) The radius negotiated by the car, R = 80 cm = 0.8 m
The speed of the car, v = 12 m/s
From tan(θ) = v²/(R·g), we have;
tan(θ) = 12²/(0.8 × 9.81) ≈ 18.349
θ ≈ arctan(18.349°) ≈ 86.88°
Potential Energy (kJ)
Reaction Progress →
A) Does this graph represent an endothermic or exothermic reaction? Explain your answer. (2 points) HELP PLEASE ITS URGENT !!
Answer:
Endothermic reaction
Explanation:
(a) Endothermic reaction: These are reactions that absorb heat from the surrounding during a chemical reaction. The enthalpy change for endothermic reaction is always positive, and the energy level of the product is higher than that of the reactant
(b) Exothermic reaction: These are reactions that release heat to the surrounding during chemical reaction. The enthalpy change for exothermic reaction is always positive, and the energy level of the product is lower than that of the reactant.
From the diagram in the question,
Since the energy level of the product is higher than that of the reactant then the reaction is an endothermic reaction and as such, ΔH is positive
An airplane with a ground speed of 550 km/hr travels along a heading of 30 degrees n of w at that high altitude there is a powerful 210 km/hr wind
Answer:
Determine the direction that the pilot is aiming the plane.
Explanation:
a current of 6.0A runs through a circuit for 2.5 minutes how much change was delivered to this circuit
Answer:
900C
Explanation:
Change 2.5 mins to secs by multiplying by 60 which is 150secs
hope this helps please like and mark as brainliest
What is the magnitude of the electric field at a point 0.0055 m from a 0.0025
C charge?
kg
Use E = and k=9.00 x 10 N.m²/C2.
O A. 7.4 x 1011 N
O B. 2.0 x 1010 N
O C. 4.1 x 10°N
OD. 7.9 x 1012 N
Answer:
Explanation:
The equation for the electric field is
[tex]E=\frac{kQ}{r^2}[/tex] so filling in:
[tex]E=\frac{9.00*10^9(.0025)}{(.0055)^2}[/tex] which in the end gives you
E = 7.4 × 10¹¹, choice A
A particle is moving on a circular path of radius R. What will be its displacement and distance covered after 3 ½ round?
(please help fast)
Answer:
2r or diameter
Explanation:
After 3 1/2 rounds it will end up on the other side of the circle and displacement will be 2 x the radius = d
Distance = 7 π R
Displacement = 2 R from the starting point directed through the center of the circle
What is the relationship between Avogadro's number and a mole?
A. There are 6.02 x 1023 items in a mole, which equals Avogadro's
number
B. A mole is a smaller amount than Avogadro's number.
C. Avogadro's number is used to count particles, and a mole is used
to measure mass.
D. A mole applies to any item, but Avogadro's number is limited to
atoms.
SUBM
Answer:
A. There are 6.02 x 1023 items in a mole, which equals Avogadro's
number
Explanation:
The mole of a substance is
A bus starts to move with the speed of 15m/s. Calculate the time taken by the bus to cover distance of 15000m.
Answer:
1000
Explanation:
the formula of time taken= d/s. t=15000÷15 t=1000. I hope it helps
formula of distance is S=Vt
so, 15000=15t
15000 divide by 15=t
1000=t or t=1000
why is the value of g more in terai than in the mountain
The solution and answer are well written in the Pic above.
A steer must eat at least 100 pounds of grain to gain less than 10 pounds of muscle tissue. This illustrates Group of answer choices the second law of thermodynamics. that some energy is destroyed in every energy conversion. the first law of thermodynamics. that energy transformations are typically 100% efficient.
Answer:
the second law of thermodynamics. that some energy is destroyed in every energy conversion.
Explanation:
According to the second law of thermodynamics, energy conversion is never 100% efficient. Some energy is always lost as it is being converted from one form to the other.
The fact that a steer must eat at least 100 pounds of grain to gain less than 10 pounds of muscle tissue shows that not all the energy taken up from the grain is channelled towards building the muscle tissue. Some energy from the grains are lost on the way according to the second law of thermodynamics.
1.8kg 42J 9.8 how high is the shelf
Answer:
2.38m
Explanation:
Use potential energy
PE= mgh
42= 1.8*9.8*h
solve for h
to get h= 2.38 m
The U.S. has plans to build a 30-meter telescope, while the Europeans are thinking about a 39-meter telescope. What technological innovation allows astronomers to be thinking about telescopes with that large an aperture
Answer:
The mirror in these telescopes will be constructed from many smaller mirrors which will work together.
Explanation:
A telescope is defined as an optical instrument that is used to observe or view the distant objects. A telescope is made up of curved lenses or mirrors or by combining both.
In the context, both the US and the Europeans are planning to make a telescope which is 30 m and 39 m respectively. This could be possible as the mirrors that are used to make these telescope will be made from a many smaller mirrors that will work together as a single large mirror having a very large aperture.
Although centuries ago astronomers thought that a supernova was a new star appearing for the first time in the heavens, today we know that it is:
Answer:
a violently exploding star that releases light energy whose intensity can illuminate a whole galaxy.
Explanation:
A Supernova is a violent star explosion that causes the release of light that expands so many times and that is capable of illuminating a galaxy. It marks the end of a star and also results in the release of gamma rays, radio waves, x-rays, and heavy elements. Unlike a nova, a supernova destroys the star where it occurs.
A supernova is classified into Type I and Type II. Type I supernova produces three times more brightness than Type II and it occurs as a white dwarf absorbs hot gas from an associate star. The Type II supernova marks the end of the star. It lacks the ability to produce nuclear energy at its core and results in the collapse of the star.
Which of the following statements describes how tectonic plates move?
A. They move from the crust to the core.
B. They move from the mantle to the inner core.
C. They move from the inner core to the outer core.
D. They move slowly on top of the mantle.
Answer:
D
Explanation:
The tectonic plates move on the mantle, sort of floating on it as they are part of the crust. When they collide things like mountain ranges form, and big earthquakes happen.
what is the relationship between Hectare and cubic meter
Infrared telescopes are usually placed on high-flying airplanes or on satellites in space __________
Answer:
In order to improve visibility
Explanation:
Infrared telescopes are made using infrared cameras that contain infrared detectors which are solid-state and are maintained at very cold (cryogenic) temperatures
Infrared radiation is absorbed by water vapor which is present in the Earth's atmosphere, leading to the limitation of the use of infra red telescopes at high altitudes such as mountains, high flying planes or satellites
