slope of -4/3x with point (7,20) find equation

Answer:

Margin of Error = z∝/2 * Standard Error

Step-by-step explanation:

The formula for standard error is given by

SE = [tex]\sqrt{\frac{pq}{n} }[/tex]

Where p is the probability or proportion of success q=1-p and n is the number of trials or samples.

Now Margin of Error is given by

ME = z∝/2 * Standard Error

The confidence level is used to estimate the value of alpha.

For example 90% confidence means alpha= 1-0.9= 0.1 and alpha by 2 would be 0.05 . So the value for alpha by 2 would be 1.96

Answer:

Step-by-step explanation:

Q(x)=x² − 6x − 2

To find Q(−4) substitute the value of x which is - 4 into Q(x)

That's

Q(-4) = (-4)² - 6(-4) - 2

Q(-4) = 16 + 24 - 2

We have the final answer as

Hope this helps you

Answer:

  -11/13

Step-by-step explanation:

The equation of the line through these points can be written using the 2-point form of the equation of a line:

  y = (y2 -y1)/(x2 -x1)(x -x1) +y1

  y = (4 -(-3))/(-9-4)/(x -4) -3

  y = (-7/13)x +28/13 -3

For x=0, the value of y is ...

  y = 28/13 -39/13 = -11/13

The output for an input of 0 is -11/13.

Answer:

x = -5 or x = i sqrt(3) or x = -i sqrt(3)

Step-by-step explanation:

Solve for x:

x^3 + 5 x^2 + 3 x + 15 = 0

The left hand side factors into a product with two terms:

(x + 5) (x^2 + 3) = 0

Split into two equations:

x + 5 = 0 or x^2 + 3 = 0

Subtract 5 from both sides:

x = -5 or x^2 + 3 = 0

x = (0 ± sqrt(0^2 - 4×3))/2 = ( ± sqrt(-12))/2:

x = -5 or x = sqrt(-12)/2 or x = (-sqrt(-12))/2

sqrt(-12) = sqrt(-1) sqrt(12) = i sqrt(12):

x = -5 or x = (i sqrt(12))/2 or x = (-i sqrt(12))/2

sqrt(12) = sqrt(4×3) = sqrt(2^2×3) = 2sqrt(3):

x = -5 or x = (i×2 sqrt(3))/2 or x = (-i×2 sqrt(3))/2

(2 i sqrt(3))/2 = i sqrt(3):

x = -5 or x = i sqrt(3) or x = (-2 i sqrt(3))/2

(2 (-i sqrt(3)))/2 = -i sqrt(3):

Answer: x = -5 or x = i sqrt(3) or x = -i sqrt(3)

Answer:

C. x = −5, 1.7i, −1.7i

Step-by-step explanation:

Quick answer:

C. x = −5, 1.7i, −1.7i

explanation:

C. is the only answer option that does NOT have 0 as a root, which is impossible, because there is a constant term, which means that all roots are non-zero. In other words, we cannot extract x as a factor.

Complete answer:

All odd degree polynomials have at least one real root.

By the real roots theorem, we know that

if there is a real root, it must be of the form [tex]\pm[/tex]p/q where q is any of the factors of the leading coefficient (1 in this case) and p is any factor of the constant term d (15 in this case).

Values of [tex]\pm[/tex]p/q are

On trial and error, using the factor theorem, we see that

f(-5) = 0, therefore -5 is a real root.  By long division, we have a quotient of x^2+3 = 0, which gives readily the remaining (complex) roots of +/- sqrt(5) i

The answer is {-5, +/- sqrt(5) i}, or again,

C. x = −5, 1.7i, −1.7i

∡NMO = 59°

if MO bisect =>

=> ∡LMN = 2∡LMO =>

=> 5x - 22 = 2(x + 31)

5x - 22 = 2x + 62

5x - 2x = 62 + 22

3x = 84

x = 28°

∡LMO = ∡NMO => ∡NMO = x + 31

=> ∡NMO = 28 + 31 = 59°

Answer:

Approximately 3.05

Step-by-step explanation:

Using "compatible numbers" we can simply round these numbers to integer values.  Let's make 76.32 => 76 and 24.98 => 25

So from here let's do 76/25 to get 3 R 1/25

1/25 as a decimal is .04

So far, we have 3.04.  Going back to Look at our decimals, .32 and .98, there is a larger difference in our down rounding with the .32 than the up rounding from our .98.  So we should consider an extra value in our decimal.

Considering our whole number of 3.0, we can assume that our rounding will have an increase of about .01 or .015 in error.

Thus our number will be 3.04 + .01.

Making our quotient approximately 3.05.

Cheers.

Answer:

5

Step-by-step explanation:

Just multiply 5/7 by 7 since his dog retrieved 5/7 out of the 7 ducks he shot.

Answer:

5

Step-by-step explanation:

7*5/7

7 represents the # of ducks

5/7 represents the # of ducks that were recovered

The question asks the number of ducks that were recovered so you should multiply the total # of ducks there are by the fraction that were recovered.

Answer:

[tex]\text{Critical Region} = z<-1.96\ \text{or}\ z>1.96[/tex]

Step-by-step explanation:

A test for the difference between two population means is to be performed.

As the population variances are known, the z-test will be used.

The hypothesis can be defined as follows:

H₀: μ₁ = μ₂ vs. Hₐ: μ₁ ≠ μ₂

Assume that the significance level of the test is, α = 0.05.

The critical region can be defined as follows:

The critical value of z for α = 0.05 is:

[tex]z_{\alpha/2}=z_{0.05/2}=z_{0.025} =-1.96\\\\z_{1-\alpha/2}=z_{1-0.05/2}=z_{0.975} =1.96[/tex]

Use a z-table.

[tex]\text{Critical Region} = z<-1.96\ \text{or}\ z>1.96[/tex]

Answer:

Calculated χ² = 13.425

χ² (5,0.025) >14.45 and χ²(5,0.975) <1.24

The given data does not fall in the critical region so we accept H0 and conclude there is no evidence to doubt the color distribution claimed by the website.

Step-by-step explanation:

Color             Blue      Orange     Green    Red   Yellow    Brown

Frequency     30         48              55        66         70         131

Expected      40           40              40        80          80        120

H0:  The bag of plain M&Ms is made up of 10% blue, 10% orange, 10% green, 20% red, 20% yellow, and 30% brown

Ha: The color distribution is not equal to  the distribution stated in the null hypothesis.

Calculate chi square

χ² = (30-40)² /40 + (48-40)²/40 + (55-40)²/40 + (66-80)²/80 + (70-80)²/80 + (131-120)²/120

χ² = 2.5 + 1.6 + 5.625 + 2.45 + 1.25= 13.425

The critical region for χ²  for 5 degrees of freedom with ∝= 0.05 is

χ² (5,0.025) >14.45 and χ²(5,0.975) <1.24

The given data does not fall in the critical region so we accept H0 and conclude there is no evidence to doubt the color distribution claimed by the website.

Answer: Find answer in the attached files

Step-by-step explanation:

Answer:

A. The point that splits a line segment into two equal parts.

Step-by-step explanation:

A. The point that splits a line segment into two equal parts.

Midpoint, as the word suggests, means the point which lies in the middle of something. The correct option is A.

Midpoint, as the word suggests, means the point which lies in the middle of something. The midpoint of a line segment means a point which lies in the mid of the given line segment.

The statement that best describes the midpoint of a segment is the point that splits a line segment into two equal parts.

Learn more about Midpoint:

https://brainly.com/question/5127660

#SPJ5

Answer:

4 sweets

Step-by-step explanation:

we know that there is a total of 48 sweets being handed out, and we can tell that this is an example of inverse proportion:

when one increases the other decreases

So, we multiply 8 * 6 to get 48, and then divide that by 12 to get 4 which is how many each student gets

for some constant k -> xy/z=k

Answer:

  your answer is correct.

Step-by-step explanation:

For the purpose here, we'll call the missing point on the arc through Z point X.

Essentially, you want to make ΔXYZ ≅ ΔLMN by SSS. The construction so far ensures LM ≅ MN ≅ XY ≅ YZ. By copying the length LN to XZ, you ensure the congruence of the remaining sides of the triangles.

Then ∠XYZ ≅ ∠LMN because corresponding parts of congruent triangles are congruent.

In short, XZ needs to be the same distance as LN.

Answer:

a)0.519

b)requirements for constructing a confidence interval about p are satisfied.

c)0.488, and 0.550

d)yes this is because there is no possibility

that the true proportion is not captured in the confidence interval.

e)

0.450, 0.512

Step-by-step explanation:

a)The point estimate for the population proportion of adult Americans who believe that televisions are a luxury they could do without can be calculated as

521 of that adult that indicated that televisions are a luxury they could do without/1003 adults surveyed,

p = 521/1003

= 0.519.

b)

np(1-p)=1003×(0.519)×(1-0.519)

=250.39≥10 and the sample size is less than 5% of the population

therefore, requirements for constructing a confidence interval about p are satisfied.

c) we were given 95% confidence,

Then α=(1-0.95)

= 0.05

From the Z-tables,we can get the critical value is Z , which is (0.05/2) = Z (0.025) = 1.96

confidence interval can the be calculated using the formula below

- p ± Z*√ p (1 – p)/n

=0.519 ± 1.96√0.519×(1 – 0.519)/(1003)

= 0.519 ± 1.96×0.0158

0.519 ± 0.031

= 0.488, and 0.550

d) yes this is because there is no possibility

that the true proportion is not captured in the confidence interval.

e)the sample size can be calculated as

P=x/n

=(1003-521)/1003

=0.481

But we're given 95% confidence interval

Then

α=(1-0.95)=

0.05

From the Z-tables,we can get the critical value is Z , which is (0.05/2) = Z (0.025) = 1.96

Then convidence interval=

- p ± Z*√ p (1 – p)/n

=0.481 ± 1.96√0.481×(1 – 0.481)/(1003)

0.450, 0.512

Answer:

Solution : Third Option

Step-by-step explanation:

The first step here is to make all the signs uniform. As you can see the third inequality has a less than sign, which we can change to a greater than sign by dividing negative one on either side, making the inequality y > - 7.

[tex]\begin{bmatrix}y>-3x+4\\ y>2x\\ y>-7\end{bmatrix}[/tex]

Now take a look at the third option. Of course the y - coordinate, 3, is greater than - 7, so it meets the third requirement ( y > - 7 ). At the same time 3 > 1( 2 ) > 2, and hence it meets the second requirement as well. 3 > - 3( 1 ) + 4 > - 3 + 4 > 1, meeting the first requirement.

Therefore, the third option is a solution to the system.

Answer:

[tex]\huge\boxed{Q = \sqrt{A+2a}}[/tex]

Step-by-step explanation:

[tex]A = Q^2 -2a[/tex]

Adding 2a to both sides

[tex]Q^2 = A+2a[/tex]

Taking sqrt on both sides

[tex]Q = \sqrt{A+2a}[/tex]

Answer:

The equation for a unit radius circle, centered at the origin is:

x^2 + y^2 = 1

Now, if we want to move it horizontally, you can recall to the horizontal translations:

f(x) -----> f(x - a)

Moves the graph to the right by "a" units.

A vertical translation is similar.

Then, if we want a circle centered in the point (a, b) we have:

(x - a)^2  + (y - b)^2 = 1.

Now, if you want to change the radius, we can actually write the unit circle as:

x^2 + y^2 = 1^2

Where if we set x = 0, 1 = y, this is our radius

So if we have:

x^2 + y^2 = R^2

And we set the value of x = 0, then R = y.

So our radius is R.

Then:

"A circle of radius R, centered in the point (a, b) is written as:

(x - a)^2 + (y - b)^2 = R^2

Answer:

x ≈ 4.5

Step-by-step explanation:

Given y varies inversely with x then the equation relating them is

y = [tex]\frac{k}{x}[/tex] ← k is the constant of variation

Here k = 76 and y = 17 , thus

17 = [tex]\frac{76}{x}[/tex] ( multiply both sides by x )

17x = 76 ( divide both sides by 17 )

x ≈ 4.5 ( to the nearest tenth )

Answer:

Solution : ( - 5, 5π / 4 )

Step-by-step explanation:

There are four cases to consider here, the first two with respect to r > 0, the second two with respect to r < 0. r is the directed distance from the pole, and theta is the directed angle from the positive x - axis. Let's start by listing coordinates when r is positive. r here is 5 units from the positive x - axis.

( 5, θ ) theta here is between 30 and 60 degrees, so we can say it's about 45 degrees.

( 5, θ ) theta here is the remaining negative side of 360 - 45 = 315. That would make it - 315.

And when r is negative ( r < 0 ),

( - 5, θ ) now the point is going to lie on the ray pointing in the opposite direction of the terminal side of theta. This will be 45 degrees more than 180, or 180 + 45 = 225 degrees.

Right away we know that ( - 5, 225° ) is our solution, we don't have to consider the second case. Converting 225 to radians in terms of π will be 5π / 4 radians, giving us a solution of ( - 5, 5π / 4 ) or option b.

Answer:

$325.28

Step-by-step explanation:

152+152=304

304x1.07=325.28

Answer:

325.28

Step-by-step explanation:

increase the price by 100 %

152* 100%

152

Add this to the original price

152+152 = 304

Now find the sales tax

304 * 7%

304 * .07

21.28

Add this to the amount of the purchase price

304+21.28

325.28

Answer:

There are 2000 pounds in a short ton. To convert short tons to pounds, multiply the ton value by 2000.

Answer:

5/100000 tons

Step-by-step explanation:

Answer:

a. t = 2.48 will be a period within 2009.

b. 56.16 million

Step-by-step explanation:

Here is the complete question

Apple introduced the first iPod in October 2001. Sales of the portable music player grew slowly in the early years but began to grow rapidly after 2005. But the iPod era is coming to a close. Smartphones with music and video

Apple introduced the first iPod in October 2001. Sales of the portable music player grew slowly in the

END OF THE IPOD ERA

players are replacing the iPod, along with the category of device it helped to create. Sales of the iPod worldwide from 2007

through 2011 (in millions) were

approximately

N(0= -2.65t2 + 13.13t+ 39.9 (0 < t< 4)

in year t, where t= 0 corresponds to 2007. Show that the worldwide sales of the iPod peaked sometime in 2009. What was the approximate largest number of iPods sold worldwide from 2007 through 2011?

a. Show that the worldwide sales of the iPod peaked sometime in 2009

N(t) = -2.65t² + 13.13t + 39.9

To find the maximum value of N(t), we find dN(t)/dt and equate it to zero

dN(t)/dt = d[-2.65t² + 13.13t + 39.9]/dt

dN(t)/dt = -5.3t + 13.13 = 0

-5.3t = - 13.13

t = -13.13/(-5.3)

t = 2.477

t ≅ 2.48

d²N(t)/dt² =d[-5.3t + 13.13]/dt = -5.3 < 0. So, t = 2.48 is a maximum point

Since t = 2 is 2009 and t = 3 is 2010, t = 2.48 will be a period within 2009.

b. What was the approximate largest number of iPods sold worldwide from 2007 through 2011?

The approximate largest number of ipods sold is when t = 2.48

N(2.48) = -2.65(2.48)² + 13.13(2.48) + 39.9

N(2.48) = -16.29856 + 32.5624 + 39.9

N(2.48) = 56.16384

N(2.48) ≅ 56.16 million

Answer:

20 by 20 by 20

Step-by-step explanation:

Let the total surface of the rectangular box be expressed as S = 2xy + 2yz + 2xz

x is the length of the box

y is the width and

z is the height of the box.

S = 2xy + 2yz + 2xz ... 1

Given the volume V = xyz = 8000 ... 2

From equation 2;

z = 8000/xy

Substituting into equation 1;

S = 2xy + 2y(8000/xy)+ 2x(8000/xy)

S = 2xy+16000/x+16000/y

Differentiating the resulting equation with respect to x and y will give;

dS/dx = 2y + (-16000x⁻²)

dS/dx = 2y - 16000/x²

Similarly,

dS/dy = 2x  + (-160000y⁻²)

dS/dy = 2x - 16000/y²

Note that at the turning point, ds/dx = 0 and ds/dy = 0, hence;

2y - 16000/x² = 0 and 2x - 16000/y² = 0

2y = 16000/x² and 2x = 16000/y²

2y = 16000/(8000/y²)²

2y = 16000×y⁴/64,000,000

2y = y⁴/4000

y³ = 8000

y =³√8000

y = 20

Given 2x = 16000/y²

2x = 16000/20²

2x = 16000/400

2x = 40

x = 20

Since Volume of the box is V = xyz

8000 = 20(20)z

8000 = 400z

z = 8000/400

z = 20

Hence, the dimensions which minimize the surface area of this box is 20 by 20 by 20.

The dimensions which minimize the surface area of this box is 20 *20* 20. This can be calculated by using surface area and volumes.

Let the total surface of the rectangular box be expressed as:

S = 2xy + 2yz + 2xz

where,

x is the length of the box

y is the width and

z is the height of the box.

S = 2xy + 2yz + 2xz .................(1)

Given:

Volume V = xyz = 8000 .............(2)

From equation 2;

z = 8000/xy

Substituting into equation 1;

S = 2xy + 2y(8000/xy)+ 2x(8000/xy)

S = 2xy+16000/x+16000/y

Differentiating the resulting equation with respect to x and y will give;

dS/dx = 2y + (-16000x⁻²)

dS/dx = 2y - 16000/x²

Similarly,

dS/dy = 2x  + (-160000y⁻²)

dS/dy = 2x - 16000/y²

Note that at the turning point, ds/dx = 0 and ds/dy = 0, hence;

2y - 16000/x² = 0 and 2x - 16000/y² = 0

2y = 16000/x² and 2x = 16000/y²

2y = 16000/(8000/y²)²

2y = 16000×y⁴/64,000,000

2y = y⁴/4000

y³ = 8000

y =³√8000

y = 20

Given 2x = 16000/y²

2x = 16000/20²

2x = 16000/400

2x = 40

x = 20

Since, Volume of the box is V = xyz

8000 = 20(20)z

8000 = 400z

z = 8000/400

z = 20

Hence, the dimensions which minimize the surface area of this box is 20*20*20.

Find more information about Surface area here:

brainly.com/question/1090412

Answer: 1023.75 (a)

Step-by-step explanation:

The sequence is a Geometric progression with the common ratio of ¹/₂ and first term of 512.

a = 512, r = ¹/₂. To determine the ratio, just divide the second term by the first term.

Now to calculate the sum, we consider two formula here and select the one that is most appropriate,

(1)  a( rⁿ - 1 )/r - 1, when r is greater than 1

(2) a( 1 - rⁿ )/1 - rⁿ, when r is less than 1.

In this question, formula 2 shall be appropriate because r is less than 1.

so,

S₁₂      =  512( 1 - 0.5¹² )/1 - 0.5

             512( 1 - 2.44 ₓ 10⁻⁴ )/0.5

          = 512( 0,9998 )/0.5

          = 511.875/0.5

          = 1023.75

The answer is a

Answer:

63 cm

Step-by-step explanation:

If Chubby ran his wheel, which has a diameter of 20cm, we want to find its circumference - this will tell us how far Chubby has ran one one full rotation of the wheel.

The formula for the circumference of a circle is [tex]2\pi r[/tex], where r is the radius. We know the diameter is 20, which is double the radius, so the radius is [tex]20\div2=10[/tex] cm.

We can know substitute inside the formula:

[tex]2\cdot \pi \cdot10\\\\2\cdot 3.14 \cdot10\\\\ 6.28\cdot10\\\\62.8[/tex]

62.8 rounded to the nearest cm is 63.

Hope this helped!

Answer:

6280

Step-by-step explanation:

Answer:

see below

Step-by-step explanation:

-33, -27, -21, -15,....

-33 +6 = -27  

-27+6 = -21

-21+6 = -15

This is an arithmetic sequence

The common difference is +6

explicit formula

an=a1+(n-1)d  where n is the term number and d is the common difference

an = -33 + ( n-1) 6

an = -33 +6n -6

an = -39+6n

recursive formula

an+1 = an +6

10th term

n =10

a10  = -39+6*10

      = -39+60

      =21

sum formula

see image

The sum will diverge since we are adding infinite numbers

Answer:

x=0 or x=2 or x=−4 or x= (7)(2)

Step-by-step explanation:

Answer:

  x = s, y = t, z = -6 -s -t

Step-by-step explanation:

These are dependent equations. For some values s and t, the solution is ...

  x = s, y = t, z = -6 -s -t