The structural feature that distinguishes whether a hydrocarbon is an alkane, alkene, alkyne, or aromatic is the type of carbon-carbon bonding present in the molecule.
(a) Alkanes have single covalent bonds between all carbon atoms in the molecule. Ethane (C2H6). (b) Alkenes have at least one double covalent bond between two carbon atoms in the molecule. Example: Ethene (C2H4). (c) Alkynes have at least one triple covalent bond between two carbon atoms in the molecule. Example: Ethyne (C2H2). (d) Aromatic hydrocarbons have a cyclic structure with alternating double bonds that form a delocalized pi electron system known as an aromatic ring. Example: Benzene (C6H6).
To know more about carbon-carbon bonding, here
brainly.com/question/12156863
#SPJ4
Calculate the mass of sodium chloride required to prepare a 100cm^3 of 1.00 mol dm^-3 sodium chloride solution.( The molar mass of sodium Chloride is 58.5gmol^-1)
Answer:
To prepare a 1.00 mol dm^-3 sodium chloride solution, we need to dissolve one mole of sodium chloride in one liter of solution (1000 cm^3).
However, we only need to prepare 100 cm^3 of the solution, which is 1/10 of a liter. So we need to dissolve:
1/10 * 1.00 mol = 0.100 mol
of sodium chloride in 100 cm^3 of solution.
The molar mass of sodium chloride is 58.5 g/mol. So to calculate the mass of sodium chloride required, we can use:
mass = number of moles x molar mass
mass = 0.100 mol x 58.5 g/mol
mass = 5.85 g
Therefore, we need 5.85 g of sodium chloride to prepare 100 cm^3 of 1.00 mol dm^-3 sodium chloride solution.
Which one of the following sets of units is appropriate for a third-order rate constant? s–1 mol L–1s–1 L mol–1s–1 L2 mol–2s–1 L3 mol–3s–1
The appropriate unit for a third-order rate constant is The L² mol-² s-¹. A third-order reaction is a type of chemical reaction where the concentration of each molecular responding determines how quickly the reaction proceeds.
What is rate constant ?A reaction rate constant, or reaction rate coefficient, k, quantifies the rate and direction of a chemical reaction in chemical kinetics. The rate constant, also known as the specific rate constant, is the proportionality constant in the equation expressing the relationship between the rate of a chemical reaction and the concentrations of the reactants.
What is third order reaction?A third-order reaction is a type of chemical reaction where the concentration of each molecular responding determines how quickly the reaction proceeds. Typically, the variation of three concentration factors in this reaction determines the rate.
There may be various cases involved when dealing with a third-order reaction. It might be;
(i) The concentrations of the three reactants are equal.
(ii) Two reactants are present in an equal amount, but one is present in a different amount.
(iii) The concentrations of the three reactants vary or are uneven.
Use formula,
(mol/L)¹⁻ⁿ s⁻¹
To know more about rate constant ,visit ;
brainly.com/question/20305871
#SPJ1
Classify the compounds as a strong acid, weak acid, strong base, or weak base.Strong acid ______Weak acid ______Strong base ______Weak base ______Aswer Bank : HI, HCN, NH3, Sr(OH)2, H2S03, H2S04, LiOH
Strong acid: H₂SO₄
Weak acid: H₂SO₃, HCN
Strong base: Sr(OH)₂, LiOH
Weak base: NH₃, H₂S
Acids are chemical compounds that, when dissolved in water, release hydrogen ions (H+). Their sour taste, capacity to make litmus paper red, and propensity to combine with bases to produce salts and water are what distinguish them. Depending on how much an acid dissociates in water, it can be characterised as either a strong or weak acid.
In water, strong acids like sulfuric and hydrochloric acid totally dissociate to create H+ ions and anions. In water, weak acids like acetic acid and carbonic acid only partially dissociate.
Acids play an important role in many chemical reactions and are used in various applications such as food and beverage processing, pharmaceuticals, and cleaning agents.
Learn more about acid here:
https://brainly.com/question/14072179
#SPJ4
Conclude Is the element silicon likely to form ionic or covalent bonds? Explain.
label each reactant and product in this reaction as a brønsted acid or base.CH3OH + OH- ----> CH3O- + H2Obaseacid
Methanol, or CH3OH, is a Brnsted-Lowry base in this reaction because it can receive a proton from the hydroxide ion, or OH-, to generate CH3O- (methoxide ion).
The Brnsted-Lowry base OH- (hydroxide ion), on the other hand, may transfer a proton (H+) to[tex]CH3OH[/tex]to create H2O. (water).So the reactants are CH3OH (base) and OH- (base), and the products are CH3O- (conjugate base of CH3OH) and H2O (conjugate acid of OH-).I apologize for the mistake in my previous response. You are correct that methanol, or CH3OH, is a Brønsted-Lowry acid in this reaction because it donates a proton (H+) to the hydroxide ion (OH-) to form CH3O- (methoxide ion). The hydroxide ion (OH-) is a Brønsted-Lowry base because it accepts a proton (H+) from CH3OH to form H2O (water). Therefore, the reactants are [tex]CH3OH[/tex] (acid) and OH- (base), and the products are CH3O- (conjugate base of CH3OH) and H2O (conjugate acid of OH-).
learn more about Methanol, or CH3OH here:
https://brainly.com/question/14278895
#SPJ4
many tests to distinguish aldehydes and ketones involve the addition of an oxidant. only choose... can be easily oxidized because there is choose... next to the carbonyl and oxidation does not require choose...
The tests to distinguish aldehydes and ketones involve the addition of an oxidant. This is because aldehydes can be easily oxidized because there is a hydrogen next to the carbonyl, and oxidation does not require a catalyst.
In general, aldehydes and ketones can be differentiated by the use of a wide range of chemical reagents. Tests for detecting these functional groups are usually based on their distinctive properties, such as the capacity to react with oxidizing agents or nucleophiles, which give different functional group products when they interact with aldehydes or ketones. Since these functional groups have differing properties, it is critical to employ distinct methods for their identification.
However, the use of oxidizing reagents to differentiate between aldehydes and ketones is one of the most frequent approaches. This is due to the presence of a hydrogen atom attached to the carbonyl group in aldehydes, which is readily oxidized by reagents such as Tollens' reagent (Ag2O/NH3) or Benedict's reagent (CuSO4 + NaOH). Hence, many tests to distinguish aldehydes and ketones involve the addition of an oxidant, this is because aldehydes can be easily oxidized because there is a hydrogen next to the carbonyl, and oxidation does not require a catalyst. Therefore, the third option is the only correct one.
Learn more about ketones at:
https://brainly.com/question/30665943
#SPJ11
where are positively charged particles found in an atom?
The positively charged particles found in nucleus of an atom and those are called protons.
Protons are found in the nucleus of the atom. This is a tiny, dense region at the center of the atom. Protons have a positive electrical charge of one (+1) and a mass of 1 atomic mass unit which is about 1.67×10−27 kilograms. There are 2 types of particles in the nucleus. Those particles are neutrons and protons. The positively particle called as protons have unit positive charge and neutrons are neutral in charge.
An atom is defined as a particle of matter that uniquely defines a chemical element. This consists of a central nucleus that is surrounded by one or more negatively charged electrons. It is evident that the nucleus is positively charged and contains one or more relatively heavy particles known as protons and neutrons.
To learn more about Protons
https://brainly.com/question/1481324
#SPJ4
Cual es la formula de 4-etil-5-propil-3,4,7-trimetildecano
The chemical formula of 4- ethyl is C19H40. This patch is composed of an ethyl group( C2H5) attached to the fourth carbon snippet( counting from one end) of a direct carbon chain.
It also has a propyl group( C3H7) attached to the fifth carbon snippet of the same chain. The chain itself has 12 carbon tittles and three methyl groups(- CH3) attached to the 3rd, 4th, and 7th carbon tittles. thus, the complete name of the emulsion is 4- ethyl, where" dodecane" refers to the 12- carbon chain.
This patch belongs to the class of alkanes, which are hydrocarbons that only contain single bonds between carbon tittles. The presence of the ethyl and propyl groups creates branching in the carbon chain, which can affect its physical and chemical parcels compared to a direct alkane with the same number of carbon tittles. The three methyl groups contribute to the patch's overall shape and may also affect its reactivity.
Learn more about chemical formula at
https://brainly.com/question/12484831
#SPJ4
The question in english language is as follows:
What is the formula of 4-ethyl-5-propyl-3,4,7-trimethyldecane?
the enthalpy of formation (ΔHf°) of nitrogen dioxide gas, NO2, is 33.8 kJ/mol. Which equation below correctly represents the chemical equation associated with this enthalpy of formation?
N2(g) + 2O2(g) → 2NO2(g)
N(g) + O2(g) → NO2(g)
N(g) + 2O(g) → NO2(g)
N2(g) + O2(g) → NO2(g)
½ N2(g) + O2(g) → NO2(g)
The correct equation that correctly represents the chemical equation associated with the enthalpy of the formation of nitrogen dioxide gas is "½ N2(g) + O2(g) → NO2(g)".
Nitrogen dioxide is a chemical compound with the chemical formula NO2. It is a gas with a sharp, biting odor and is a prominent air pollutant. It is one of the principal oxides of nitrogen.
The enthalpy of formation (ΔHf°) of nitrogen dioxide gas, NO2, is 33.8 kJ/mol. Enthalpy of formation is defined as the amount of energy liberated or absorbed when a compound is formed from its constituent elements under standard conditions.
Here, ½ N2(g) + O2(g) → NO2(g) is the equation that correctly represents the chemical equation associated with this enthalpy of formation. The energy absorbed or released in the formation of one mole of nitrogen dioxide from 1/2 mole of nitrogen gas and one mole of oxygen gas is 33.8 kJ/mol.
You can learn more about enthalpy of formation at: brainly.com/question/14563374
#SPJ11
Select the correct molecule that is the main product of the Calvin cycle.
1. G3P
2. NADPH
3. Glucose
The molecule that is the main product of the Calvin cycle is glucose. The Calvin cycle is also known as the light-independent reactions.
It is a series of biochemical reactions that occur in the stroma of the chloroplast in photosynthetic organisms to produce glucose. The Calvin cycle is made up of three stages: Carbon fixation, Reduction and regeneration of ribulose bisphosphate. Here's a breakdown of each stage:
Carbon fixation: Carbon dioxide enters the Calvin cycle and is converted to organic molecules. During carbon fixation, Rubisco, which is a crucial enzyme in photosynthesis, catalyzes the reaction between carbon dioxide and ribulose bisphosphate, leading to the formation of a six-carbon molecule that splits into two three-carbon molecules. This three-carbon molecule is the starting material for the reduction process.
Reduction: The ATP and NADPH produced during the light-dependent reactions are used to convert the three-carbon molecule produced during carbon fixation into glyceraldehyde-3-phosphate. This process involves a series of biochemical reactions that require the use of energy from ATP and electrons from NADPH.
Regeneration of ribulose bisphosphate: Glyceraldehyde-3-phosphate, which is the main product of the Calvin cycle, is used to regenerate the starting material for carbon fixation, ribulose bisphosphate. During this stage, ATP is used to convert the remaining glyceraldehyde-3-phosphate molecules into ribulose bisphosphate. The Calvin cycle is an essential process in photosynthesis, as it produces glucose, which is the main source of energy for plants and other photosynthetic organisms.
For more such questions on glucose , Visit:
https://brainly.com/question/397060
#SPJ11
Why are carboxylic acids more acidic than water or ethyl alcohol esters?
Carboxylic acids are more acidic than water or ethyl alcohol esters due to their stronger resonance stabilization. Carboxylic acids contain a carboxyl group (COOH) that is able to stabilize the extra electron density of the conjugate base (COO-) through resonance. The more electron-withdrawing atoms in the carboxyl group, the more stable the resonance structure and therefore the stronger the acid. Water and ethyl alcohol esters, on the other hand, have less electron-withdrawing atoms, so their conjugate base is not as stable and their acidity is less than that of carboxylic acids.
Additionally, carboxylic acids tend to have smaller molecules than water or ethyl alcohol esters. This means that their conjugate base will have a stronger interaction with the proton and therefore the acid is stronger. In contrast, water and ethyl alcohol esters are larger molecules and their conjugate base is less capable of stabilizing the proton and thus making the acid less acidic.
Know more about Carboxylic acids here:
https://brainly.com/question/4721247
#SPJ11
How would the pKa of the unknown acid be affected (higher, lower, or no change) if the following errors occurred? Please explain.
a) The pH meter was incorrectly calibrated to read lower than the actual pH.
b) During the titration several drops of NaOH missed the reaction beaker and fell onto the bench top.
c) Acid was dissolved in 75 mL of distilled water rather than 50 mL of distilled water.
Also, the same question, but if it says: How would the molar mass of the unknown acid be affected (higher, lower, or no change) if the following errors occurred? Please explain.
Same things that are asked in part a,b, and c.
The pKa will be higher in the unknown acid solution. The pH of the unknown acids would not be affected by several drops of NaOH solution.
What is pKa and pH of solution?The pKa of the unknown acid would be higher if the pH meter was incorrectly calibrated to read lower than the actual pH. This is because if the pH meter reads lower than the actual pH, the measured pH would be lower than the actual pH.
As pKa is the negative logarithm of the acid dissociation constant, Ka, which is directly proportional to the hydrogen ion concentration, [H⁺], a decrease in the measured pH would lead to a decrease in the measured [H⁺]. Since:
pKa = -log Ka = -log [H⁺] + log [HA], a decrease in [H⁺] would lead to an increase in pKa.
The pKa of the unknown acid would not be affected if several drops of NaOH missed the reaction beaker and fell onto the bench top. This is because the number of moles of NaOH that react with the unknown acid is not affected by the drops that miss the beaker.
The number of moles of NaOH that react with the unknown acid is determined by the volume and the concentration of NaOH added to the beaker and the volume and the concentration of the unknown acid in the beaker. Therefore, the pKa would remain the same.
The pKa of the unknown acid would not be affected if acid was dissolved in 75 mL of distilled water rather than 50 mL of distilled water. This is because the pKa of an acid is an intrinsic property that is independent of the amount of the acid. The pKa is determined by the acid itself, not by the amount of acid. Therefore, the pKa would remain the same.
Learn more about pH here:
https://brainly.com/question/31035487
#SPJ11
For the reactionA(g) ? 2B(g), a reaction vessel initially contains only A at a pressure of PA=1.19 atm . At equilibrium, PA =0.20 atm . Calculate the value of Kp. (Assume no changes in volume or temperature.)
The value of Kp for the reaction with equilibrium pressure of A is given as PA = 0.20 atm and the initial pressure of A is 0.0190.
What is Kp?To find the value of Kp for the reaction, we will use the expression for the equilibrium constant in terms of the partial pressures of the reactants and the products.
Kp = (PB)²/PA
where, PB is the equilibrium pressure of B.
Initially, there is no B in the reaction vessel, so the change in pressure of B is equal to its equilibrium pressure. Using the law of conservation of mass, we can write:
PV = nRT
where, P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
Since there is no change in volume or temperature, we can write:
PV = constant or P₁V₁ = P₂V₂
where, P₁ and P₂ are the initial and equilibrium pressures of A, respectively. Since A is the only gas initially present in the reaction vessel, we can write:
P₁ = PA = 1.19 atm, P₂ = 0.20 atm V₁ = V₂
Therefore, P₁V₁ = P₂V₂ = PAV₁ = PBV₂
Since, the number of moles of A and B are related by the balanced chemical equation, we can write:
2(PB) = nB
Substituting, PB in terms of PA and V1, we get:
Kp = (PB)²/PA = (nB/2V₂)²/PA
Kp= (nB/2PAV₁)²/PA= (nB)²/(4P²AV₁)
where, nB is the number of moles of B.
To find the number of moles of B, we use the balanced chemical equation. 2 moles of B are produced for every mole of A that reacts. Since, the initial pressure of A was 1.19 atm and the equilibrium pressure of A was 0.20 atm, 0.99 atm of A has reacted.
Therefore, the number of moles of A that has reacted is:
nB = (0.99/1.19) = 0.8327 mol
The total number of moles of the system is the sum of the moles of A and B initially present in the reaction vessel.
nTotal = nA + nB
Initially, only A is present, so nTotal = nA = 1 mol. The number of moles of B is therefore:
nB = nTotal - nA = 1 - 0.8327 = 0.1673 mol
Substituting the values of PA, nB, and V1, we get:
Kp = (nB)²/(4P²AV1) = (0.1673)²/(4 × 1.19² × 1) = 0.0190
Therefore, the value of Kp for the reaction is 0.0190.
Learn more about Kp here:
https://brainly.com/question/30550192
#SPJ11
Which one of the following compounds behaves as an acid when dissolved in water?
A. RaO
B. RbOH
C. C4H10
D. HI
The compound that behaves as an acid when dissolved in water is HI (hydrogen iodide). Thus, the correct option will be D.
What is an acid?HI is an Arrhenius acid, meaning it produces hydrogen ions (H⁺) in aqueous solution. The compound that behaves as an acid when dissolved in the water Hydrogen iodide (HI). HI is a diatomic molecule and a colorless gas at room temperature.
Hydrogen iodide is a strong acid when dissolved in water, with a pKa of −10. Hydrogen iodide is also used as a reducing agent in organic chemistry in the production of iodinated compounds.
Learn more about Acids here:
https://brainly.com/question/29796621
#SPJ11
Which compound below will readily react with a solution of bromine resulting from a mixture of 48% hydrobromic acid and 30% hydrogen peroxide? a.Cyclohexene b.Dichlorometane c.Acetic acid d.t-Butyl alcohol e.Cyclohexane
The compound that will readily react with the solution of bromine resulting from the mixture of hydrobromic acid and hydrogen peroxide is option (a) Cyclohexene.
What is solution?A solution is a specific kind of homogenous mixture made up of two or more components that is used in chemistry. A solute is a substance that has been dissolved in a solvent, which is the other substance in the mixture.
Free bromine (Br2), a potent electrophilic and oxidizing agent, can be produced in situ by mixing hydrobromic acid (HBr) and hydrogen peroxide (H2O2). So, we must choose a substance that Br2 can easily react with in these circumstances.
Cyclohexene, one of the provided compounds, is an unsaturated double-bonded molecule that can go through electrophilic addition processes. With alkenes like cyclohexene, bromine easily engages in an electrophilic addition process to generate a dibromoalkane.
Hence, option (a) cyclohexene is the substance that will most rapidly react with the bromine solution produced by the mixture of hydrobromic acid and hydrogen peroxide.
Learn more about mixtures on:
https://brainly.com/question/24647756
#SPJ11
you conducted a tlc experiment and found that your compound traveled 4.01 cm and the eluting solvent traveled 9.29 cm. what is the rf value for your compound? report your answer to two decimal places (i.e., 0.01).
the Rf value for your compound is 0.43.
The Rf value of a compound is the ratio of the distance that the compound traveled to the distance that the solvent traveled.
Therefore, in the given situation where you conducted a TLC experiment and found that your compound traveled 4.01 cm and the eluting solvent traveled 9.29 cm
The Rf value for your compound can be calculated as follows:
Rf value = Distance traveled by the compound / Distance traveled by the solvent
Rf value = 4.01 cm / 9.29 cm
Rf value = 0.43 (rounded off to two decimal places)
Therefore, the Rf value for your compound is 0.43.
To know more about Rf value click here:
https://brainly.com/question/17132198
#SPJ11
P. Explain Phenomena How can bioremedia-
tion play a role in cleaning up an oil spill?
The technique of bioremediation involves using local microorganisms to absorb or degrade different parts of spilled oil in maritime environments.
How will the offshore oil issue be resolved by the bioremediation process?Bacteria can be utilised to remediate oil spills in the marine through bioremediation. Hydrocarbons, which are found in oil and gasoline, are one type of specialised contamination that can be bioremediated using particular bacteria.
What are the implications of bioremediation for oil slicks?As a result of bioremediation, there is no longer a need to collect and shift the harmful substances to another location because natural organisms may convert the toxic molecules into harmless simple molecules (Venosa).
To know more about absorb visit:
https://brainly.com/question/30867928
#SPJ1
a compound that is defined by its ability to produce hydroxide ions when dissolved in water is known as a(n) .
A compound that is defined by its ability to produce hydroxide ions when dissolved in water is known as a base.
Bases are compounds that dissolve in water to form hydroxide ions (OH-). They are hydroxide ion donors, to be precise. Bases have a pH value greater than 7. The OH- ions are released when bases are dissolved in water. Sodium hydroxide (NaOH) is a good example of a base.
When NaOH is dissolved in water, it produces hydroxide ions (OH-) and sodium ions (Na+). As a result, the solution is more basic, and the pH is greater than 7. The following are some examples of bases:
Sodium hydroxide (NaOH)Potassium hydroxide (KOH)Calcium hydroxide (Ca(OH)₂)Magnesium hydroxide (Mg(OH)₂)Ammonia (NH₃)Bases are commonly utilized in several chemical reactions. They're utilized as pH modifiers, reagents, and buffer solutions, among other things. They are also used in industries like cosmetics, detergents, and food. Furthermore, they are utilized in water treatment plants to control acidity levels and remove impurities.
Therefore, a compound that is defined by its ability to produce hydroxide ions when dissolved in water is known as a base.
To know more about hydroxide ions click here:
https://brainly.com/question/14619642
#SPJ11
an atom includes 8 electrons, 8 protons, and 8 neutrons. what is the mass of the atom?
Answer: 16
Explanation: Hence, the mass number of an oxygen atom = 8 + 8 = 16.
A substance that cannot be decomposed by a simple chemical process into two or more different substance is ______(A) molecule(B) element(C) mixture(D) compound
Explanation:
An element is a pure substance that cannot be separated into simpler substances by chemical or physical means.
why should the electrodes be kept in fixed relative positions during the electrolysis? is it really necessary for them to be parallel?
It is important to keep the electrodes in a fixed relative position during electrolysis as it affects the current that passes through the solution.
For example, if the electrodes are placed too close together, the current will be too strong and can cause damage to the system. Additionally, having the electrodes in a parallel position ensures that the current flows evenly through the entire solution. This is because having the electrodes parallel helps to ensure that the current flows in the same direction and not at different angles. This helps to keep the current steady and prevents hot spots or localized over-voltage. In conclusion, it is necessary to keep the electrodes in a fixed relative position, parallel to each other, during electrolysis to ensure the current is distributed evenly and not too strong.
For more questions on electrolysis
https://brainly.com/question/12994141
#SPJ11
coefficient in a chemical reaction is a number that goes in front of an element or compound in a balanced equation. for example in the balanced equation below the coefficient in front of the h2o is 2, meaning 2 molecules of h2o are reacting to make 2 molecules of h2 and 1 molecule of o2. 2 h2o --> 2 h2 o2 what is the coefficient that goes in front of the eca in the reaction below. e3bc4 d(ca)2 --> d3(bc4)2 eca
The coefficient that goes in front of the ECA in the chemical reaction given above is 2.
It has been indicated that coefficient in a chemical reaction is a number that goes in front of an element or compound in a balanced equation. The unbalanced chemical equation for the given reaction is:
[tex]E_{3} BC_{4} D(CA)_{2}[/tex] → [tex]D_{3} (BC_{4} ) ECA[/tex]
The balanced equation of the chemical reaction above is:
[tex]2E_{3} BC_{4} D(CA)_{2}[/tex] → [tex]D_{3} (BC_{4} )_{2} ECA[/tex]
We can see that 2 comes before ECA in the balanced chemical equation above. Therefore, the coefficient that goes in front of the ECA in the chemical reaction given above is 2.
More on chemical reaction coefficient: https://brainly.com/question/31143822
#SPJ11
Complete the synthesis by determining the set of reactions and the synthetic intermediate needed to convert the given alkyl halide to the primary amine. Drag the appropriate labels to their respective targets Hints NH HNNH2 1) HCrO 2) Hyo H2. Raney Ni H,NOH NaN3 excess NH NT trace acid DMF Br NH2
The synthetic intermediate required is [tex]HNNH_{2}[/tex]. The set of reactions required to convert the given alkyl halide to the primary amine is as follows; [tex]H_{2}[/tex], Raney Ni, then [tex]H_{2} 0[/tex], H+, heat, and finally Sn, HCl, and heat.
The synthesis needed to convert the given alkyl halide to the primary amine are as follows;Hydrogenation of the double bond, Hydrolysis of nitrile to primary amine and Reduction of nitro group to aniline. The synthetic intermediate needed is HNNH2.
The set of reactions for the synthesis is as follows;
1. Hydrogenation of the double bond is done using [tex]H_{2}[/tex], Raney Ni.
2. Hydrolysis of nitrile to primary amine is done using [tex]H_{2} 0[/tex], H+, heat.
3. Reduction of nitro group to aniline is done using Sn, HCl, and heat.
So, the set of reactions required to convert the given alkyl halide to the primary amine is as follows;[tex]H_{2}[/tex], Raney Ni, then [tex]H_{2} O[/tex], H+, heat, and finally Sn, HCl, and heat. The synthetic intermediate required is [tex]HNNH_{2}[/tex].
More on organic chemistry synthesis: https://brainly.com/question/14098748
#SPJ11
Density is a physical property that relates the mass of a substance to its volume. a) Calculate the density (in g/mL) of a liquid that has a mass of 0.155 g and a volume of 0.000275 L.
a- calculate the density (in g/mL) of a liquid has mass of 0.155 g and a volume of 0.000275L
b) Calculate the volume in milliliters of a 4.83-g sample of a solid with a density of 3.03 g/mL.
c) Calculate the mass of a 0.285-mL sample of a liquid with density 0.789 g/mL.
The density of the liquid is 0.562 g/mL, the volume in milliliters is about 1.59 mL, and the mass of 0.285mL sample is about 0.224 grams.
What is density?The formula for density is as follows:
Density = mass/volume
Density = 0.155 g/0.000275 L= 562.1 g/L
We know that, 1 L = 1000 mL
So, Density = 562.1 g/L × 1 L/1000 mL= 0.562 g/mL
The density of the given liquid is 0.562 g/mL.
Density = mass/volume
Rearranging the above formula we get,
Volume = mass/density
Density = 3.03 g/mL, Mass = 4.83 g
Volume = 4.83 g/3.03 g/mL= 1.59 mL
Therefore, the volume in milliliters of a 4.83 g sample of a solid with a density of 3.03 g/mL is 1.59 mL.
Mass = density × volume
M = D × V
Density = 0.789 g/mL, Volume = 0.285 mL
Mass = 0.789 g/mL × 0.285 mL= 0.224 g
Therefore, the mass of a 0.285-mL sample of a liquid with density 0.789 g/mL is 0.224 g.
Learn more about Density here:
https://brainly.com/question/29775886
#SPJ11
PLEASE HURRY!!!!!!! Which statements correctly describe the movement of water into and out of the ground?
Choose two correct answers.
Gravity helps move water into the ground.
Mountains help move water out of the ground.
Rocks on Earth’s surface help move water into the ground.
The Sun helps move water into the ground.
The roots of trees help move water out of the ground.
Answer:
Gravity helps move water into the ground.
How many molecules of oxygen are produced by the decomposition of 6. 54 g of potassium chlorate (KCLO3)?
The breakdown of 6.54 g of potassium chlorate results in the production of 4.81 x [tex]10^{22}[/tex]oxygen molecules.
The balanced chemical equation for the decomposition of potassium chlorate is:
2 KClO3(s) → 2 KCl(s) + 3 O2(g)
This equation tells us that for every 2 moles of potassium chlorate that decompose, 3 moles of oxygen gas are produced.
To determine the number of molecules of oxygen produced by the decomposition of 6.54 g of potassium chlorate, we first need to convert the mass of potassium chlorate to moles using its molar mass. The molar mass of KCLO₃ is:
K: 39.10 g/mol
Cl: 35.45 g/mol
O: 3(16.00 g/mol) = 48.00 g/mol
Total molar mass of KCLO₃: 39.10 + 3(35.45) + 48.00 = 122.55 g/mol
Number of moles of KCLO₃ = 6.54 g / 122.55 g/mol = 0.0533 mol
Now we can use the mole ratio from the balanced equation to calculate the number of moles of oxygen produced:
3 moles O₂ / 2 moles KCLO₃ = x moles O₂ / 0.0533 moles KCLO₃
x = 3/2 x 0.0533 = 0.0799 moles O₂
Finally, we can convert the number of moles of oxygen to the number of molecules using Avogadro's number:
Number of molecules of O2 = 0.0799 mol x 6.022 x [tex]10^{23}[/tex] molecules/mol = 4.81 x [tex]10^{22}[/tex] molecules
Therefore, 4.81 x [tex]10^{22}[/tex] molecules of oxygen are produced by the decomposition of 6.54 g of potassium chlorate.
To learn more about molecules refer to:
brainly.com/question/14646440
#SPJ4
Consider the molecular structure for linuron, an herbicide, provided in the questions below. a) What is the electron domain geometry around nitrogen-1? b) What is the hybridization around carbon-1? c) What are the ideal bond angles > around oxygen-1? d) Which hybrid orbitals overlap to form the sigma bond between oxygen-1 and nitrogen-2? e) How many pi bonds are in the molecule?
Answer:
a)Electron domain geometry around nitrogen-1 is tetrahedral
b)Hybridization around carbon-1 is sp2
c)The ideal bond angles around oxygen-1 are 120 degrees.
d)Hybrid orbitals overlapping to form the sigma bond between oxygen-1 and nitrogen-2 is sp2 hybrid orbitals from carbon-1 and nitrogen-2
e)There are no pi bonds in the molecule.
Explanation:
a) Electron domain geometry around nitrogen-1 is tetrahedral.The molecular structure of linuron is as follows: There are three carbon atoms in a row. The terminal carbon atom is linked to a methyl group and a chlorine atom. The carbon atom next to it is linked to the nitrogen atom in the herbicide. The third carbon atom is linked to two oxygen atoms, with one of them being a hydroxyl group.
b) Hybridization around carbon-1 is sp2.The carbon atom adjacent to the nitrogen atom is known as carbon-1. This carbon atom is joined to three other atoms. It has an sp2 hybridization since it has three regions of electron density.
c) The ideal bond angles around oxygen-1 are 120 degrees.Bond angles are the angles between two adjacent lines in a Lewis structure. Because oxygen-1 is linked to two other atoms, it has a bent geometry. Its ideal bond angle is 120 degrees.
d) Hybrid orbitals overlapping to form the sigma bond between oxygen-1 and nitrogen-2 is sp2 hybrid orbitals from carbon-1 and nitrogen-2.The sigma bond is the strongest type of covalent bond. Sigma bonds are created when the overlapping orbitals are arranged in a straight line. The sigma bond between oxygen-1 and nitrogen-2 is formed by the overlap of sp2 hybrid orbitals from carbon-1 and nitrogen-2.
e) There are no pi bonds in the molecule.There are no pi bonds in the molecule because all of the bonds are sigma bonds. The molecule consists of single bonds only.
To know more tetrahedral. about refer here: https://brainly.com/question/18612295#
#SPJ11
Charged ions such as sodium, potassium, and chloride are called ______.
Charged ions such as sodium, potassium, and chloride are called electrolytes.
Ions are atoms or molecules that have a positive or negative charge. They develop an electrical charge when an atom or molecule gains or loses one or more electrons, becoming an ion. Cations are ions with a positive charge, whereas anions are ions with a negative charge. The conductivity of fluids is due to charged ions like electrolytes.
Sodium, potassium, chloride, bicarbonate, calcium, and phosphate are examples of electrolytes that are vital for the body's daily function. Electrolytes play a significant role in maintaining the correct water balance and assisting in the transmission of electric impulses across cells.
For more such questions on electrolytes, click on:
https://brainly.com/question/17089766
#SPJ11
Which change to the experimental design would improve the reliability of the engineers' measurements?
ОА.
using a liquid other than water to determine porosity
ОВ.
using flasks instead of beakers
OC
testing single samples from more than three locations
OD
testing more samples from each location
Testing more samples from each location would improve the reliability of the engineers' measurements.
The correct option is D
By increasing the number of samples tested, the engineers can obtain a more accurate representation of the porosity of the material in question. This can help to account for any variation or outliers in the data, which can improve the reliability of the results. Using a different liquid or different containers may affect the results but may not necessarily improve reliability. Testing single samples from more than three locations may provide more information but may not necessarily improve reliability if the samples are not representative of the overall population.
To know more about reliability click here:
brainly.com/question/30154360
#SPJ4
which one of the following molecules has the highest boiling point? you will explain why in the next question. responses 3-methoxy-1-propanol 3-methoxy-1-propanol 1,2-dimethoxyethane 1,2-dimethoxyethane 1,4-butanediol 1,4-butanediol 1,1-dimethoxyethane 1,1-dimethoxyethane 2-methoxy-1-propanol
The molecule with the highest boiling point is 1,4-butanediol. This is because of the presence of intermolecular hydrogen bonding. Thus, the correct option is C.
What is intermolecular hydrogen bonding?A hydrogen bond is an intermolecular force that exists between a hydrogen atom bonded to a highly electronegative atom (like N, O, or F) and another highly electronegative atom in another molecule. Hydrogen bonding is a type of dipole-dipole interaction that occurs between molecules that have a permanent dipole.
The four molecules, 3-methoxy-1-propanol, 1,2-dimethoxyethane, 1,4-butanediol, and 2-methoxy-1-propanol, all have oxygen atoms that are capable of forming hydrogen bonds. In order to form a hydrogen bond, a hydrogen atom in one molecule must be bonded to an electronegative atom like oxygen or nitrogen, and another electronegative atom in a neighboring molecule must be present.
In this case, 1,4-butanediol has two -OH groups on the ends of the carbon chain that are capable of forming hydrogen bonds with neighboring molecules, resulting in a higher boiling point. Because of the presence of intermolecular hydrogen bonding, the molecules have stronger intermolecular forces that require more energy to break, resulting in a higher boiling point.
Therefore, the correct option is C.
Learn more about Boiling point here:
https://brainly.com/question/2153588
#SPJ11
