The given statement about radii is false and the correct statement is only radii of cation are always smaller than radii of corresponding atoms of same elements.
Radii of anions are greater than its parent atoms due to the following reasons: 1. Size of anion is always greater than its parent atom because anions are formed due to gain of electrons. When electrons increases there are still same number of protons. The attractive force is thus reduced as there are same number of protons attraction increased number of electrons. This causes the electrons to not be bound as tightly to the nucleus resulting in an increase in size. 2. Size of cation is always smaller than its parent atom because as a particular atom looses electron, no of proton become more than no of electron and attraction forces increases. So radius decreases.
To learn more about attraction forces check the link below:
https://brainly.com/question/25624188
#SPJ4
hydrogen cyanide, hcn, is a poisonous gas. the lethal dose is approximately 300 hcn per kilogram of air when inhaled. (a) calculate the amount of hcn that gives the lethal dose in a small laboratory room measuring . the density of air at is 0.00118 (b) if the hcn is formed by reaction of with an acid such as what mass of nacn gives the lethal dose in the room?
The amount of HCn that gives the lethal dose in a small laboratory room measuring the density of air at is 0.00118 is 14.4 g of the HCN.
The volume of the air present in laboratory room is as :
volume of laboratory room = length × breadth × height
= 12 × 15 × 8 ft³
= 1440 ft³ = 4.08 × 10⁷ cm³
The mass of air = density of air × volume of the laboratory room
= 0.00118 g /cm³ × 4.08 × 10⁷ cm³
= 48210.7 g = 48.21 kg
a) The lethal dose of HCN in the 1kg of the air = 300 × 10⁻³ g of HCN
therefore , for 48.21 kg = 300 × 10⁻³ × 48.21
= 14.4 g
b) 2 moles of the HCN form the 2 moles of NaCN
molar mass of NaCN = 49 g/mol
molar mass of HCN = 27 g/mol
54 g of HCN will form 98 g of NaCN
14.4 g of HCN is consider as the lethal dose
theferfore , mass of NaCN give the lethal dose = (98 / 54 ) 14.4
= 26.22 g
To learn more about lethal dose here
https://brainly.com/question/11526333
#SPJ4
which of the following is false about crystal field theory? group of answer choices weak field ligands absorb purple light. the color of a coordination compound is the color of light absorbed.
The following statement is false about crystal field theory : the color of a coordination compound is the color of light absorbed.
Crystal field theory (CFT) describes how a static electric field produced by a surrounding charge distribution breaks degeneracies of electron orbital states, usually d or f orbitals (anion neighbours).
Hans Bethe, a physicist, developed the crystal field theory (CFT) for crystalline solids in 1929.
The following is how Crystal Field Theory explains the colors of coordination compounds: The splitting of a d-orbital into multiple orbitals is known as crystal field splitting. When white light strikes the compound, an electron moves into a higher state, absorbing a specific wavelength of light.
For more information on Crystal field theory (CFT), visit :
https://brainly.com/question/29389010
#SPJ4
the solubility of caf2 is measured to be 0.017 g/l. based on this information, what is ksp for caf2? the molar mass of caf2 is 78.075 g/mol.
The molar mass of caf2 is 78.075 g/mol is 4.14 x 10^ -11.
CaF2 (s) <----> Ca2+ (aq) + 2F- (aq)
At equilibrium [Ca2+] = S , [F-] = 2S , where S is amount of CaF2 dissolved i.e solubility.
The molar mass of a chemical compound is determined by dividing its mass by the quantity of that compound, expressed as the number of moles in the sample, measured in moles. The molar mass of a material is a bulk attribute rather than a molecular one.
given S = 1.7 x 10^ -2 g/L = 0.017 g/L
we can convert g/L to mol/L by dividing S with Molar mass of CaF2
S in mol / L = (S in g/L) / ( CaF2 molar mass) = ( 0.017g/L) / ( 78.07g/mol) = 0.000218 mol /L
[F-] = 2S = 2 x ( 0.000218) = 0.000436 mol/L
now Ksp = [Ca2+] [F-]^2
= ( 0.000218 ) (0.000436 )^2
= 4.14 x 10^ -11
To learn more about solubility visit:https://brainly.com/question/29661360
#SPJ4
how would you prepare 1 l of a 0.0500 m phosphate buffer at ph 7.50 using crystalline na2hpo4 and a solution of 1.0 m hcl?
The molarity of HCl is 1.0 M. the volume of HCl is calculated as follows:
The volume of HCl = Number of moles/Molarity
0.017 mol/1.0 mol/L
= 0.017 L
=17 mL
Since the total volume of the buffer solution is 1 L. The volume of water is calculated as:
The volume of water = 1 - Volume of HCI
= 1-0.017
= 0.983 L
Hence, to prepare a phosphate buffer, 7.1 g of Na, HPO4, 17 mL of HCl, and 0.983 L of water are mixed together.
Phosphate-buffered saline is a commonly used buffer in biological research. This is an aqueous saline solution containing disodium hydrogen phosphate, sodium chloride, and in some formulations potassium chloride and potassium dihydrogen phosphate. Buffers help maintain a constant pH.
Learn more about Phosphate buffer here:- https://brainly.com/question/23941991
#SPJ4
any area that has been treated with talcum powder or skin lotion must be rubbed with ________ to remove the residue and facilitate the adherence of the leads.
Any area that has been treated with talcum powder or skin lotion must be rubbed with alcohol to remove the residue and facilitate the adherence of the leads.
What is Alcohol?This is referred to as a substance which is derived from the fermentation of sugar under anaerobic conditions and it usually has an intoxicating effect.
However, it is also used for other purposes such as skin care and is usually applied after it has been treated with talcum powder or skin lotion so as to remove the residue and facilitate the adherence of the leads thereby making alcohol the correct choice in this scenario.
Read more about Alcohol here https://brainly.com/question/2231540
#SPJ1
based on their structures, rank phenol, benzene, benzaldehyde, and benzoic acid in terms of lowest to highest boiling point. explain your reasoning.
Increasing order of boiling point of the given molecules is
Benzene< Benzaldehyde<Phenol<Benzoic acid.
Boiling point is directly proportional to intermolecular forces.
The intermolecular forces present in the given molecules are.
so, as benzene is nonpolar , only weak london dispersion force is present. Hence boiling point of benzene is least among the given molecules. Benzaldehyde is polar, so dipole -dipole force is also present. But no H-bonding is present. Hence, boiling point of benzaldehyde is less than that of phenol and benzoic acid. Now, both phenol and benzoic acid is polar as well as they can form H-bonding. But phenol can only form intermolecular hydrogen bonding, but benzoic acid can form both intermolecular as well as intramolecular H bonding. So it can exist as dimer. The presence of dimer further strengthen the vander Waals dispersion forces , that increases the boiling point of Benzoic acid.
Hence increasing order of boiling point of the given molecules is
Benzene< Benzaldehyde<Phenol<Benzoic acid.
Learn more about boiling point here:
https://brainly.com/question/40140
#SPJ4
How many liters (L) of water need to be added to prepare 1000mL of
0.3M NaCI from a 5M NaCI stock solution?
The amount, in liters, of water needed to be added to prepare 1000 mL of 0.3 M NaCl from a 5 M NaCl stock solution would be 0.94 L.
Dilution problemAccording to the dilution principle, the number of moles of solutes before dilution must be equal to the number of moles of solutes after dilution. This is mathematically expressed as:
[tex]m_1v_1[/tex] = [tex]m_2v_2[/tex]
Where [tex]m_1[/tex] and [tex]m_2[/tex] are molarities before and after dilution, and [tex]v_1[/tex] and [tex]v_2[/tex] are volumes before and after dilution.
In this case, [tex]m_1[/tex] = 5 M, [tex]m_2[/tex] = 0.3 M, [tex]v_2[/tex] = 1000 mL.
Let's find [tex]v_1[/tex]:
[tex]v_1[/tex] = [tex]m_2v_2[/tex] /[tex]m_1[/tex]
= 0.3x1000/5
= 60 mL
In other words, the volume of the stock solution to be taken is 60 mL. This volume has to be diluted by water to the 1000 mL mark. Thus, the amount of water to be added would be:
1000 - 60 = 940 mL
940 mL = 0.94 L
In summary, 0.94 L of water will be required to prepare the solution.
More on dilution problems can be found here: https://brainly.com/question/29093084
#SPJ1
When warm air from a large body of water moves quickly into a land area of cold air, we can expect _________ to occur where the two air masses meet.
Answer: thunderstorms
Explanation:
Use the diagram to answer the question that follows.
Two different samples of matter are measured in each of these glass containers. Both of
the containers show the same measure for both samples of matter. The samples MOST
likely have which of these in common
If two different samples of matter are measured in each of these glass containers and Both of the containers show the same measure for both samples of matter. They would have same volume in common
What is volume?The space occupied inside an object's borders in three dimensions is referred to as its volume. It is sometimes referred to as the object's capacity.
The capacity of a thing is measured by its volume. For instance, a cup's capacity is stated to be 100 ml if it can hold 100 ml of water in its brim.
Read more on volume here: https://brainly.com/question/28810551
#SPJ1
Complete question unfound
if atoms were smaller, planck's constant would be group of answer choices larger. smaller. no different in physical size.
If atoms were smaller, Planck's constant would be smaller.
Planck's constant is the proportionality constant pertaining to a photon's strength to its frequency. a particle representing a quantum of mild or different electromagnetic radiation. A photon contains strength proportional to the radiation frequency however has 0 relaxation mass. The constant offers the connection among the strength of a photon and its frequency, and through the mass-strength equivalence, the connection among mass and frequency. This constant is directly proportional to the number of atoms. therefore if atoms were smaller, Planck's constant would be smaller.
To learn more about electromagnetic radiation check the link below:
https://brainly.com/question/1408043
#SPJ4
Draw the Lewis structure for XeF2 in the window below and then answer the questions that follow. с P opy aste []* С ChemDoodle Is XeF2 polar or nonpolar?
If XeF2 is polar or nonpolar based on the Lewis Structure and the molecular geometry (shape).
What is nonpolar?A nonpolar molecule has no separation of charge, so no positive or negative poles are formed. In other words, the electrical charges of nonpolar molecules are evenly distributed across the molecule. Nonpolar molecules tend to dissolve well in nonpolar solvents, which are frequently organic solvents.In a polar molecule, one side of the molecule has a positive electrical charge and the other side has a negative electrical charge. Polar molecules tend to dissolve well in water and other polar solvents.There are also amphiphilic molecules, large molecules that have both polar and nonpolar groups attached to them. Because these molecules have both polar and nonpolar character, they make good surfactants, aiding in mixing water with fats.To learn more about molecules refer to:
https://brainly.com/question/475709
#SPJ4
You are approached by a neighboring group of human survivors and they are wanting to know what you are shooting at the alien craft so you can see them at night. Choose the right explanation for this effect.
a Chemicals in the paint absorb light energy in a process called phosphorescence, radioactive elements keep the glow going.
b Key element is sulfur and the sulfur creates light after being heated in a process called sulfunescense
c Chlorine is the reason why the alien vessels glow.
d Calcium make the light when the craft comes into contact with water
Atoms of different element can not have same atomic number because only same type of atoms combine to form element. Atoms belonging to different element can have different atomic number. Therefore, the correct option is option A.
What is element?Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.
Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Chemicals in the paint absorb light energy in a process called phosphorescence, radioactive elements keep the glow going.
Therefore, the correct option is option A.
To know more about element, here:
https://brainly.com/question/8460633
#SPJ1
What description explains how pollen is received?
The ovule at the top of the pistil receives pollen.
The stigma at the top of the pistil receives pollen.
The pistil at the top of the stamen receives pollen.
The stamen at the top of the pistil receives pollen.
The description which explains how pollen is received is that the stigma at the top of the pistil receives pollen and is therefore denoted as option B.
What is Pollen?This is a powdery substance produced by seed plants and it consists of one or more vegetative cells and a reproductive cell. It is involved in the production of the male gametes in plants which makes it an importgant component in the ecosystem.
During pollination by different types of agents such as birds, wind etc the pollen are dispersed in various directions in which some get to the stigma at the top of the pistil which is the female reproductive part of the plant.
This therefore leads to fertilization and a fruit is formed as a result which is therefore the reason why option B was chosen as the correct answer.
Read more about Pollen here https://brainly.com/question/21021623
#SPJ1
What volume in ml of 0.175 m na2so4 solution is necessary to completely react with 35.0 ml of 0.112 m agno3?
The volume of 0.175M sodium sulfate solution that is necessary to completely react with 35.0 mL of 0.112M silver nitrate is 22.4mL.
How to calculate volume?Molarity is the concentration of a substance in solution, expressed as the number moles of solute per litre of solution.
The volume of a solution can be calculated using the following expression:
CaVa = CbVb
Where;
Ca = initial concentrationVa = initial volume Cb = final concentrationVb = final volumeAccording to this question, 0.175M sodium sulfate solution completely reacts with 35.0 mL of 0.112M silver nitrate. The volume required for this reaction to occur can be calculated as follows:
0.175 × Va = 35 × 0.112
0.175Va = 3.92
Va = 3.92/0.175
Va = 22.4mL
Therefore, 22.4mL is the volume of the sodium sulfate needed.
Learn more about volume at: https://brainly.com/question/12346232
#SPJ1
__________ is a pulling force. Atmospheric pressure also acts as a force on objects
Answer:
Gravity
Explanation:
Draw the electron pair geometry for sulfur tetrafluoride, SF4, . What the name of the molecular shape of sulfur tetrafluoride
Answer: The hybridization that is involved in SF4 is sp3d type. Here will learn and understand how to determine SF4 hybridization. We will discuss the steps in detail.
Name of the Molecule Sulphur Tetrafluoride
Molecular Formula = SF4
Hybridization Type = sp3d
Bond Angle = 102o and 173o
Geometry = see-saw
Explanation:
In order to determine the hybridization of sulphur tetrafluoride, you have to first understand its Lewis structure and the number of valence electrons that are present. The SF4 molecule consists of a total of 34 valence electrons. Here 6 will come from sulphur and each of the four fluorine atoms will have 7 electrons.
During the formation of SF4, the sulphur atom will form bonds with each of the fluorine atoms where 8 valence electrons are used. Meanwhile, the four fluorine atoms will have 3 lone pairs of electrons in their octet which will further utilize 24 valence electrons. In addition, two electrons will be kept as lone pairs in the sulphur atom. Now we can determine sulphur’s hybridization by taking a count of the number of regions of electron density.
When bonding takes place there is a formation of 4 single bonds in sulphur and it has 1 lone pair. Looking at this, we can say that the number of regions of electron density is 5.
EXTERNAL LINKS :
https://www.chemtube3d.com/vseprshapesf4/
https://geometryofmolecules.com/sf4-lewis-structure-polarity/
Which of the following concentration measures will change in value as the temperature of a solution changes?
1. mass percent
2.mole fraction
3. molality
4. molarity
5. all of these
The concentration measures will change in value as the temperature of a solution changes is molarity. The correct option is 4.
What is molarity?The molarity of a substance refers to how much of it is present in a given volume of solution (M). Molarity is the measure of how many moles of a solute are present per liter of a solution. Molarity is also referred to as a solution's molar concentration.
To find the equation for molarity, divide the volume of solvent used to dissolve the given solute by the number of moles of that solute. M = n V
Since the volume of the solution rises as the temperature rises, molarity decreases. Therefore, molarity is normally affected when therefore is a change in temperature of a solution either when it increases or decreases.
Learn more about molarity below.
https://brainly.com/question/14469428
#SPJ1
. n specifies fill in the blank 4 l specifies fill in the blank 5 ml specifies fill in the blank 6 ... a.the orbital orientation. b.the energy and average distance from the nucleus. c.the subshell - orbital shape.
n specifies B. The energy and average distance from the nucleus, l specifies C. The subshell - orbital shape, ml specifies A. The orbital orientation.
n is known Principal quantum number
l is known Azimuthal quantum number
ml is known Magnetic quantum number
The energy and usual distance from the nucleus are described by the fundamental quantum number, or n.
The subshell and orbit's shape are described by the orbital quantum number, or l.
The orbit's direction is described by the magnetic quantum number, ml.
So, n specifies B. The energy and average distance from the nucleus.
l specifies C. The subshell - orbital shape.
ml specifies A. The orbital orientation.
Thus, n specifies B., l specifies C., ml specifies A.
To learn more about Orbitals, Here :
https://brainly.com/question/29065230?referrer=searchResults
#SPJ4
lactic acid has a pka equal to 3.86. what fraction of total lactic acid will be dissociated to lactate at ph 7.00?
The lactic acid has a pka equal to 3.86. the fraction of total lactic acid will be dissociated to lactate at pH 7.0 is 1.3 × 10³.
given that :
pH = 7.0
the pka value for the lactic acid = 3.86
according to the Henderson hasselbalch we get :
pH = pka + log [ H] / [HA]
substituting all the values ,we get
pH = pka + log [ H] / [HA]
7 = 3.86 + log [ H] / [HA]
log [ H] / [HA] = 3.14
[ H] / [HA] = 10 ^ 3.14
[ H] / [HA] = 1380.3
[lactate]/ [lactic acid] = 1.3 × 10³
thus, the ratio of the [lactate]/ [lactic acid] = 1.3 × 10³
To learn more about lactic acid here
https://brainly.com/question/17750424
#SPJ4
(50 points)
Diurnal temperature range is the difference between ________ and ________ temperature each _________.
high, low, hour
high, low, day
beginning, ending, hour
beginning, ending, day
Answer: Diurnal temperature range is the difference between __maximum______ and ____minimum____ temperature each ___1 day______.
Explanation:
a chemist adds of a zinc nitrate solution to a reaction flask. calculate the millimoles of zinc nitrate the chemist has added to the flask. round your answer to significant digits.
992 millimoles of zinc nitrate the chemist has added to the reaction flask.
Zinc nitrate is an inorganic compound with the formula Zn(NO₃)₂. This colorless, crystalline salt is extremely hydrophilic. it's generally encountered as a hexahydrate Zn(NO₃)₂·6H₂O. it's soluble in each water and alcohol. Zn Nitrate may be a colorless or white, odorless, crystalline (sand- like) solid or flake. it's used as a catalyst and a mordant for dyes, and in liquid plant food.
Chemists and materials scientists study substances at the atomic and molecular levels and analyze the ways that within which the substances move with each other. They use their information to develop new and improved product and to check the standard of factory-made product.
The question is incomplete, find the complete question here
A chemist adds 435.0mL of a 2.28 M zinc nitrate ZnNO32 solution to a reaction flask. Calculate the millimoles of zinc nitrate the chemist has added to the flask. Round your answer to 3 significant digits.
To learn more about zinc nitrate here
brainly.com/question/29627918
#SPJ4
what is the form of energy contained in a dam called? group of answer choices nuclear chemical kinetic potential
Potential Energy is the form of energy contained in dam.
Total energy:
The total energy of each considered object is the sum of its potential energy (P.E) and kinetic energy (K.E) and is constant throughout motion. For example, at finite height, a ball has maximum potential energy and zero kinetic energy, and when released, K.E increases and becomes maximum at ground level, and P.E decreases to zero at ground level. , so the total energy increases. There is movement of the ball in the same way everywhere. The energy that an object has due to its motion is called kinetic energy, and the energy that an object has due to its position and shape is called potential energy.
Here the water dammed by the dam has a certain potential height. This means that water has latent energy because it is located far from the bottom. Therefore, water dammed up by a dam has potential energy.
Potential Energy:
In physics, potential energy is the energy possessed by an object due to its position relative to other objects, its own tension, electrical charge, or other factors. Common types of potential energy are the gravitational potential energy of a body, the elastic potential energy of an extended spring, and the electrical potential energy of an electric charge in an electric field. The unit of energy in the International System of Units (SI) is the joule, and the symbol is J.
Learn more about Potential Energy:
https://brainly.com/question/24284560
#SPJ4
Ultra-light vs. Ultra-hard
Compared to the atomic arrangement of atoms in diamond, the atomic arrangement of atoms in the ultra-light material were..
a arranged in a line of atoms
b spread apart, chaotic, and spongy
c arranged in a pattern of highly organized crystals
d flat orderly 2-dimensional sheets
Compared to the atomic arrangement of atoms in diamond, the atomic arrangement of atoms in the ultra-light material were option B: spread apart, chaotic, and spongy.
What is the atomic arrangement about?The atomic arrangement of atoms in the ultra-light material described in the question is likely to be different from that of diamond. Diamond is a very hard and rigid material, with a highly ordered and crystalline atomic structure.
In contrast, the ultra-light material is described as being "spread apart, chaotic, and spongy," which suggests that its atomic arrangement is much less organized and more disordered than that of diamond.
Therefore, based on the above, this may be due to the use of a different type of bonding between atoms, or a different arrangement of atoms within the material, which results in a less rigid and more flexible structure.
Learn more about atomic arrangement from
https://brainly.com/question/873464
#SPJ1
Dna has an important role in making proteins, the biomolecules that help determine our traits as well as take part in chemical reactions throughout our bodies. Can you correctly label the steps/parts involved in protein synthesis?.
Protein synthesis is a process that is generated within cells where different organelles and genetic components are involved through which proteins are generated.
What are the steps of protein formation?The biosynthesis of proteins will be given by different parts, beginning with the translation of the genetic material. It will be given by different steps:
1. mRNA binds to ribosomes and the aminoacyl-tRNA to be associated to the first codon of the mRNA is associated.
2. The elongation of the polypeptide chain occurs, in which the amino acids are joined
3. The elongation is finished when the termination codons are reached.
4. The translation components are released and post-translational modifications are started.
5. The folding, glycosylation and modification of amino acids occur
6. Finally, the protein is released to generate its function
To learn more about protein synthesis visit: https://brainly.com/question/29765585
#SPJ1
the density of an unknown gas is 2.00 grams per liter at 3.00 atmosphere pressure and 127oc. what is the molar mass of this gas?
The density of an unknown gas is 2.00 grams per liter at 3.00 atmosphere pressure and 127oc.the molar mass of this gas is 21.87 g/mol.
given that :
density , d = 2 g/L
pressure P = 3 atm
temperature , T = 127 °C
the ideal gas equation is given as :
P V = nR T
and d = m / V
where,
m = mass
V = volume
Molar mass M = m/n
now the equation becomes :
P V / m = n R T / m
P / d = R T / M
M = d R T / P
M = ( 2 g/L × 0.082 L atm / mol K × 400.15 K ) / 3 atm
M = 21.87 g / mol
To learn more about density here
https://brainly.com/question/1870457
#SPJ4
Describe where the error (if any) is in the following orbital diagram. If there is an error, be sure to include the name of the rule and how to correct it. It is okay that the orbital diagram is horizontal- this is a space saver (energy increases to the right).
The electrons in an atom are depicted in orbital diagrams in visual form. For creating orbital diagrams, three rules are helpful.
What is Orbital diagram?Each electron resides in the orbital with the , in accordance with the Auf Bau Principle.
According to the Pauli Exclusion Principle, an orbital can hold no more than two electrons. According to Hund's rule, electrons enter various orbitals within a single sub-level before doubling up within orbitals.
We have seen how the quantity and kind of valence electrons play a crucial role in establishing the chemical characteristics of a specific element. Due to their propensity to lose their single valence, Group 1A metals are extremely reactive.
Therefore, The electrons in an atom are depicted in orbital diagrams in visual form. For creating orbital diagrams, three rules are helpful.
To learn more about orbital diagram, refer to the link:
https://brainly.com/question/28809808
#SPJ1
What is the mass of 2.0 moles of the element titanium is titanium molar mass is 47.9g/mol?
Answer:
The answer is 95.8 grams.
Explanation:
To solve this problem we need to use dimensional analysis. We have the amount in moles and want to find the mass in grams, so we need a conversion factor. This conversion factor is also given to us and allows us to "convert" between grams and moles. The dimensional analysis is modeled below:
2.0 mol * (47.9 g/1 mol) = 95.8 g
Notice how since we have the unit of moles in the numerator and the denominator, these will cancel out, yielding an answer expressed in grams.
For more information on dimensional analysis and mole/gram conversions, check out these questions:
https://brainly.com/question/4165766
https://brainly.com/question/13078117
how many o atoms are in ammonium acetate? how many o atoms are in ammonium acetate? 5 2 1 3 none of the above
There are 2 O atoms are in Ammonium acetate ( CH₃COONH₄ ).
Ammonium ( NH₄⁺ ) comes from Ammonia ( NH₃ ) :
NH₃ + H⁺ → NH₄⁺ ( Ammonium ion )
Acetate ( CH₃COO⁻ ) comes from Acetic acid ( CH₃COOH ) :
CH₃COOH → CH₃COO⁻ + H⁺
Ammonium acetate :
NH₄⁺ + CH₃COO⁻ = CH₃COONH₄
Here, Ammonium ion does not have any O atom and acetate have 2 o atoms,
0-O + 2-O = Total number of atom O
Total number of atom O = 2
So, the right option is B. 2, there are 2 O atoms are in Ammonium acetate ( CH₃COONH₄ ).
To learn more about Ammonium acetate, Here :
https://brainly.com/question/29803256?referrer=searchResults
#SPJ4
help fast Which products are the result of a reaction between potassium fluoride, KF, and sodium hydroxide, NaOH?
KNa and FOH
KOH and NaF
Na and KFOH
K and FNaOH
Potassium fluoride and sodium hydroxide react to produce potassium hydroxide and sodium fluoride respectively. Option 2.
Chemical reactionPotassium fluoride and sodium hydroxide undergo a double decomposition reaction. They exchange radicals to produce potassium hydroxide and sodium fluoride respectively according to the following equation:
[tex]KF + NaOH --- > KOH + NaF[/tex]
Potassium is able to displace sodium from sodium hydroxide because it is higher on the reactivity series of metals than sodium.
Thus, the product of the reaction of potassium fluoride and sodium hydroxide are [tex]KOH[/tex] and [tex]NaF[/tex].
More on chemical reactions can be found here: https://brainly.com/question/29762834
#SPJ1
Which scientist help developed the current model of the atom which states that electrons are located in regions known as orbitals or electron clouds?
Erwin Schrodinger is the scientist who created the present theory of the atom, which states that electrons are found in areas known as orbitals or electron clouds.
He proposed the treatment of electrons as matter waves in the quantum mechanical model of the atom. In 1926, Erwin Schrodinger created the "Electron Cloud Model." It was made up of an electron cloud with many different orbital levels surrounding a dense nucleus. He determined areas around the nucleus that are most likely to contain electrons based on his estimates. He referred to these areas as orbitals. "Lobes" are a term used to describe the likelihood of finding electrons in orbitals. This atomic model is a representation of an atom that has a small, massive nucleus that is encircled by a cloud of electrons that are travelling quickly.
To learn more about atomic model click here https://brainly.com/question/9145431
#SPJ4
