(a) The recoil or backward velocity of the gun is 8 m/s.
(b) The bullet cannot penetrate the plank of the wood completely.
The given parameters include;
mass of the bullet, m₁ = 100 g = 0.1 kgmass of the gun, m₂ = 5 kginitial velocity of the bullet, u₁ = 400 m/sthickness of the plank, x = 10 cm(a) The backward or recoil velocity of the gun is calculated by applying the principle of conservation of linear momentum.
let the backward or recoil velocity of the gun = u₂m₁u₁ + m₂u₂ = 0
m₂u₂ = -m₁u₁
[tex]u_2 = -\frac{m_1u_1}{m_2} \\\\u_2 = - \frac{0.1 \times 400}{5} \\\\u_2 = -8 \ m/s[/tex]
Thus, the recoil or backward velocity of the gun is 8 m/s.
(b) determine if the bullet can penetrate the plank of the wood completely
the bullet traveled 4 cm and lost ¹/₃ of u₁the remaining distance to completely penetrate the plank = 6 cmthe final velocity of the bullet at 4 cm, v = 400 - ¹/₃ x 400 m/s = 266.67 m/sthe acceleration of the bullet is calculated as;
v² = u₁² + 2as
2as = v² - u²
[tex]a = \frac{v^2 -u_1^2}{2s} \\\\a = \frac{(266.67)^2 -(400)^2}{2\times 0.04} = -1.111 \times 10^6 \ m/s^2[/tex]
Finally, determine the distance traveled by the bullet when it comes to a complete stop, that is the final velocity = 0
[tex]v_f^2 = v^2 + 2ad\\\\2ad = v_f^2 - v^2\\\\d = \frac{v_f^2 - v^2}{2a} \\\\d = \frac{(0) - (266.67)^2}{2(-1.111\times 10^6)} \\\\d = 0.032 \ m[/tex]
d = 3.2 cm
The total distance traveled by the bullet inside the plank = 4 cm + 3.2 cm = 7.2 cm
Therefore, the bullet cannot penetrate the plank completely.
To learn more about linear momentum visit: https://brainly.com/question/15869303
Cuánto demorará un cuerpo en alcanzar su máxima altura, sabiendo que fue lanzado, verticalmente hacia arriba, con una velocidad cuyo valor fue de 90 m/s?
Answer:
The maximum height reached is 413.27 m.
Explanation:
How long will it take for a body to reach its maximum height, knowing that it was thrown, vertically upwards, with a velocity whose value was 90 m / s?
initial velocity , u = 90 m/s
gravity, g = 9.8 m/s^2
Let the maximum height is h.
At maximum height the velocity v = 0
Use third equation of motion
[tex]v^2 = u^2 - 2 gh\\\\0 = 90\times 90 - 2 \times 9.8 \times h\\\\h = 413.27 m[/tex]
why solid keep their shape?
Answer:
Solids can hold their shape because their molecules are tightly packed together. ... Atoms and molecules in liquids and gases are bouncing and floating around, free to move where they want. The molecules in a solid are stuck in a specific structure or arrangement of atoms
Hope this helps ☆*:. o(≧▽≦)o .:*☆
The primary circuit of a transformer has a voltage of 80 V and 300 windings. The secondary circuit has a voltage of 240. How many windings are there in the secondary circuit? *
Answer:
900 windings
Explanation:
Applying,
Vs/Vp = Ns/Np............. Equation 1
Where Vs = Secondary voltage, Vp = primary voltage, Ns = Number of turns in the secondary circuit, Np = number of turns in the primary circuit
make Ns the subject of the equation
Ns = VsNp/Vp........... Equation 2
From the question,
Given: Vs = 240 V, Np = 300 windings, Vp = 80 V
Substitute these values into equation 2
Ns = (240×300)/80
Ns = 900 windings
An unbalanced 6.0-newton force acts eastward on an object for 3.0 seconds. The impulse
produced by the force is
18 N:s east
2 Nós east
18 N:s west
2 Nis west
Convertir 25 km/h a m/s
Answer:
6.9 m/s
Explanation:
1000m = 1km
3600s = 1hr
25000m/3600s
6.9m/s
Two astronomy students travel to South Dakota. One stands on Earth’s surface and enjoys some sunshine. At the same time, the other descends into a gold mine where neutrinos are detected, arriving in time to detect the creation of a new radioactive argon nucleus. Although the photon at the surface and the neutrinos in the mine arrive at the same time, they have had very different histories. Describe the differences.
Answer:
The photon takes millions of years to reach the Surface of the sun while the Neutrinos travelling at the speed of light reaches the surface of the sun in approximately 2 seconds
The Photon is million year old while the neutrino is just some minutes old as observed by the student .
Explanation:
Although The Photon ( sunshine from the sun's surface ) heating up the student standing on the Earth's surface and the neutrinos discovered by the other student inside the gold mine are both formed in the Sun's core.
The difference between both are
The photon takes millions of years to reach the Surface of the sun while the Neutrinos travelling at the speed of light reaches the surface of the sun in approximately 2 seconds
The Photon is million year old while the neutrino is just some minutes old as observed by the student .
49. A block is pushed across a horizontal surface with a
coefficient of kinetic friction of 0.15 by applying a
150 N horizontal force.
(a) The block accelerates at the rate of 2.53 m/s2
Find the mass of the block.
(b) The block slides across a new surface while
experiencing the same applied force as before.
The block now moves with a constant speed.
What is the coefficient of kinetic friction between
the block and the new surface?
Answer:
(a) 37.5 kg
(b) 4
Explanation:
Force, F = 150 N
kinetic friction coefficient = 0.15
(a) acceleration, a = 2.53 m/s^2
According to the newton's second law
Net force = mass x acceleration
F - friction force = m a
150 - 0.15 x m g = m a
150 = m (2.53 + 0.15 x 9.8)
m = 37.5 kg
(b) As the block moves with the constant speed so the applied force becomes the friction force.
[tex]F = \mu m g \\\\150 = \mu\times 37.5\\\\\mu = 4[/tex]
Which wave has the smallest amplitude?
Answer:
C. C
Explanation:
A wave can be defined as a disturbance in a medium that progressively transports energy from a source location to another location without the transportation of matter.
In Science, there are two (2) types of wave and these include;
I. Electromagnetic waves: it doesn't require a medium for its propagation and as such can travel through an empty space or vacuum. An example of an electromagnetic wave is light.
II. Mechanical waves: it requires a medium for its propagation and as such can't travel through an empty space or vacuum. An example of a mechanical wave is sound.
A crest can be defined as the highest (vertically) point on a waveform.
On a related note, a trough is the lowest (vertically) on a waveform.
An amplitude can be defined as a waveform that's measured from the center line (its origin or equilibrium position) to the bottom of a trough or top of a crest. Thus, the vertical axis (y-axis) is the amplitude of a waveform i.e it's measured vertically.
In this scenario, waveform C which is represented by a blue curvy line has the smallest amplitude in comparison with the other waveforms because it has the minimum height when measured from the origin.
In contrast, waveform A represented by a purple line has the highest amplitude because it has the maximum height when measured from the origin.
Mathematically, the amplitude of a wave is given by the formula;
x = Asin(ωt + ϕ)
Where;
x is displacement of the wave measured in meters.A is the amplitude.ω is the angular frequency measured in rad/s.t is the time period measured in seconds.ϕ is the phase angle.Answer:
The answer is indeed D as the comment above suggests.
Explanation:
Simply put, wave D's highest point is closer to the line than all of the other high points of A, B and C
why physics ought to be studied?
Answer:
The goal of physics is to understand how things work from first principles. ... Courses in physics reveal the mathematical beauty of the universe at scales ranging from subatomic to cosmological. Studying physics strengthens quantitative reasoning and problem solving skills that are valuable in areas beyond physics.
A convex mirror of radius of curvature 1.6 m has an object placed at a distance of 1.0 m from it. Find the position of image and the magnification.
Answer:
The image is formed at 0.44 m in front of the mirror
magnification (M) = 0.44
Explanation:
Applying, mirror formular
1/f = (1/u)+(1/v).................... Equation 1
Where f = Focal length of the convex mirror, u = object distance, v = image distance.
Using the real is positive convection,
From the question,
Given: f = -1.6/2 = -0.8 m( The focal length of a convex mirror is vitual), u = 1.0 m
Substitute these values into equation 1
-1/0.8 = (1/v)+(1/1)
Solve for v
1/v = 1.25+1
1/v = 2.25
v = 1/2.25
v = 0.44 m
Hence the image is formed at 0.44 m in front of the mirror
Magnification (M) = v/u
m = 0.44/1
m = 0.44
Which is an outer planet?
Answer:
pluto
Explanation:
Dwarf because it is very minut
Answer:
I think Saturn.
Explanation:
I think the inner planets are Mercury, Venus, Earth and Mars whereas the outer ones are Jupiter, Saturn, Uranus and Neptune.
Magnetic force between the north poles of two magnets is
Magnetic force between the north poles of two magnets is REPULSIVE
Answer:Repulsion or attraction
Explanation:The angle between the compass needle and geographic north is called the MAGNETIC DECLINATION.(see earth:the magnetic field of the earth ). The repulsion or attraction between two magnetic dipoles can be viewed as the interaction of one dipole with the magnetic field produced by other dipole.
what do you mean by supplementary quantities and its unit?
$ \large\boxed{ \sf \red{More ~Info :}}$
The units of supplementary quantities are dimensionless units.
[tex] \\ [/tex]
Pls help asap!!
A bucket contains hot water at 95°c. A man wants to bath with water at 40°c. What is the ratio of the mass of hot water to the mass of cold water that he needs.
Answer:
55
Explanation:95-40=55
i hope i did the math right if i didnt please tell me
List out the fundamental and derived units
(d) Below shows a hydraulic press with a pump piston of area 4 cm2 and a ram area of
12 cm2 . IF A force of 300 N is applied on the pump piston, find:
(i)the maximum load on the ram.
(ii) the velocity ratio of the machine.
(iii) the mechanical advantage of the machine.
(iv)the efficiency of the machine.
Answer:
Explanation:
hi
Describe the advantages and disadvantage is of living in a floodplain
Answer:
:) :::::::::::::::::::::::::::::::))))
what is the effect of pressure on boiling and melting substance?
Answer:
The boiling point of liquids always increases when pressure is applied on a liquid. This is because the molecules of a liquid will need more energy to turn into a gaseous state when pressure is applied on that substance.
.
What is the equation for work?
Work = force / distance
Work = force - distance
Work = force + distance
Work = force * distance
Answer:
Work = F X D
Explanation:
Work (J) equals Force (N) multiplied by Distance (M)
The gravitational force acting on various masses is measured on different planets. Measured values for the forces acting on the corresponding masses are shown in the data table. Analyze the data and develop a method for comparing the gravitational field strengths on the different planets. Use your method to compare the gravitational field strengths, and report your conclusions.
Which labels are correct for the regions marked? a. X: Slower in gases than liquids Y: Faster in solids than gases Z: Velocity depends on medium b. X: Faster in gases than liquids Y: Slowest in solids Z: Faster in liquids than gases c. X: Slower in solids than liquids Y: Velocity depends on medium Z: Faster in liquids than gases d. X: Velocity depends on medium Y: Fastest in gases Z: Slower in liquids than solids
Answer:
a. X: Slower in gases than liquids Y: Faster in solids than gases Z: Velocity depends on medium.
Explanation:
Speed of sound is fastest in solids. Sound waves travel more quickly in solid, than of liquid and gases. Sound waves travel most slowest in gases. Speed of sound varies significantly and it depends upon medium it is travelling through. In more rigid medium sounds velocity will be faster.
What is the relationship between electric field lines and equipotential lines that you observed in doing the lab
Answer:
Explained below
Explanation:
Generally speaking, we know in physics that Electric field lines are lines which usually start at positive charges and deflect away from them to terminate at the negative charges. Meanwhile Equipotential lines are lines that are used to connect points located on the same electric potential.
Finally, in conclusion, electric field lines are usually lines that go through in a perpendicular manner across every equipotential lines.
If we go on the top of the Mountain we will our weight increase or decrease?
Answer:
increase
Explanation:
guesshejwoowsnnsnakalalapqjhdjd
Answer:
our weight would decrease.
Explanation:
because of you burning all those calories and fat from hiking up the mountain.
What is the difference between heat capacity and specific heat capacity? I want the meaning please.
Answer:
The heat capacity of a body is defined as the heat required to raise it's temperature by me degree or one kelvin.while specific heat capacity of a substance is defined as the heat required to the temperature of a unit mass of it through one degree or one kelvin.
I hope it helps
The mass of a brick is 2kg. Find the mass of water displaced by it when it is completely immersed in water. (Density of the bricks is 2.5 g/cm^3)
Answer:
2000g
Explanation:
volume=mass/density
=2000/2.5
=800cm³
mass=density×volume
=800×2.5
=2000g
A 20-N force acts on a 5-kg object at rest. How fast will
the object accelerate on a frictionless surface?
A. 15 m/s^2
B. 25 m/s^2
C. 4 m/s^2
D. 100 m/s^2
Answer:
C.
Explanation:
Force = Mass * Acceleration
So 20 = 5* Acceleration
4 = Acceleration
The acceleration of the object is 4 m/s².
To find the acceleration, the given values are:
Force = 20 N
Mass = 5 kg
Define acceleration.Definition:
As it was given as the values of Force and mass, here acceleration definition depends on the Newton's second law of motion.
Using the second law of motion, the force will be equal to the product of the mass and the acceleration.
As formula,
F = ma Newton
Here, to find acceleration,
a =f/ m
Substituting the values,
= 20 / 5
a = 4m/s².
So, the acceleration was 4 m/s². The Option C is the correct answer.
Learn more about acceleration,
https://brainly.com/question/12550364
#SPJ6
Which symbol and unit of measurement are used for electric current?
symbol. A, unit: 1
symbol: C, unit: A
symbol l; unit C
symbol: 1; unitA
Answer: Symbol is I and unit A
Explanation: A represents Amperes
HOPE THIS HELPS!!!!!!!!
Light of wavelength 530.00 nm is incident normally on a diffraction grating, and the first‑order maximum is observed to be 33.0∘ from the normal. How many slits per millimeter are marked on the grating?
Answer:
1028 slits/mm
Explanation:
We are given that
Wavelength of light, [tex]\lambda=530nm=530\times 10^{-9} m[/tex]
1nm=[tex]10^{-9} m[/tex]
[tex]\theta=33^{\circ}[/tex]
n=1
We have to find the number of slits per mm are marked on the grating.
We know that
[tex]dsin\theta=n\lambda[/tex]
Using the formula
[tex]dsin33^{\circ}=1\times 530\times 10^{-9}[/tex]
[tex]d=\frac{530\times 10^{-9}}{sin33^{\circ}}[/tex]
[tex]d=9.731\times 10^{-7} m[/tex]
1m=[tex]10^{3}mm[/tex]
[tex]d=9.731\times 10^{-7}\times 10^3[/tex]mm
[tex]d=0.0009731mm[/tex]
Number of slits=[tex]\frac{1}{d}[/tex]
Number of slits=[tex]\frac{1}{0.0009731}[/tex]/mm
Number of slits=1028/mm
Hence, 1028 slits/mm are marked on the grating.
Answer:
1027.6 lines per mm.
Explanation:
wavelength = 530 nm
order, m= 1
Angle = 33 degree
Let the slits per mm is 1/d.
So,
[tex]m \lambda = d sin A\\\\1\times 530\times 10^{-6} = d sin 33\\\\\frac{1}{d} = 1027.6 lines per mm[/tex]
A basketball is shot by a player at a height of 2.0m. The initial angle was 53° above the horizontal. At the highest point, the ball was travelling 6 m/s. If he scored (the ball went through the rim that is 3.00m above the ground), what was the player's horizontal distance from the basket?
At the ball's highest point, it has no vertical velocity, so the 6 m/s is purely horizontal. A projectile's horizontal velocity does not change, which means the ball was initially thrown with speed v such that
v cos(53°) = 6 m/s ==> v = (6 m/s) sec(53°) ≈ 9.97 m/s
The player shoots the ball from a height of 2.0 m, so that the ball's horizontal and vertical positions, respectively x and y, at time t are
x = (9.97 m/s) cos(53°) t = (6 m/s) t
y = 2.0 m + (9.97 m/s) sin(53°) t - 1/2 gt ²
Find the times t for which the ball reaches a height of 3.00 m:
3.00 m = 2.0 m + (9.97 m/s) sin(53°) t - 1/2 gt ²
==> t ≈ 0.137 s or t ≈ 1.49 s
The second time is the one we care about, because it's the one for which the ball would be falling into the basket.
Now find the distance x traveled by the ball after this time:
x = (6 m/s) (1.49 s) ≈ 8.93 m
Compared with dim light, what do light waves that look bright tend to have the subject just says science but the picker doesn't have that
Answer:
The brightness of a light depends on the amplitude of the light wave, which is the extent the waves moves from their equilibrium position. The brightness is also related to the amount of light that is emitted or reflected by an object
Therefore, compared to dim light, light that look bright have a higher amplitude and emit or reflect more light energy (photons)
Explanation:
