Answer:
The program in C++ is as follows:
#include <iostream>
#include <vector>
using namespace std;
int main(){
vector<int> nums;
int num;
cin>>num;
while(num != -1){
nums.push_back(num);
cin>>num; }
for (auto i = nums.begin(); i != nums.end(); ++i){
cout << *i <<endl; }
return 0;
}
Explanation:
This declares the vector
vector<int> nums;
This declares an integer variable for each input
int num;
This gets the first input
cin>>num;
This loop is repeated until user enters -1
while(num != -1){
Saves user input into the vector
nums.push_back(num);
Get another input from the user
cin>>num; }
The following iteration print the vector elements
for (auto i = nums.begin(); i != nums.end(); ++i){
cout << *i <<endl; }
In this project you will write a set of instructions (algorithm). The two grids below have colored boxes in different
locations. You will create instructions to move the colored boxes in grid one to their final location in grid two. Use the
example to help you. The algorithm that you will write should be in everyday language
(no pseudocode or programming language). Write your instructions at the bottom of the
page.
Example: 1. Move
the orange box 2
spaces to the right.
2. Move the green
box one space
down. 3. Move the
green box two
spaces to the left.
Write your instructions. Review the rubric to check your final work.
Rules: All 6 colors (red, green, yellow, pink, blue, purple) must be move to their new location on the grid. Block spaces are
barriers. You cannot move through them or on them – you must move around them
Answer:
Explanation:
Pink: Down 5 then left 2.
Yellow: Left 3 and down 2.
Green: Right 7, down 4 and left 1.
Purple: Up 6 and left 9.
Red: Left 7, down 5 and left 1.
You can do the last one, blue :)
Answer:
Explanation:
u=up, d=down, r=right, l=left
yellow: l3d2
pink: d5l2
green: r7d4l1
purple: u6l9
red: l7d5l1
blue: r2u7l5
the grade point average collected from a random sample of 150 students. assume that the population standard deviation is 0.78. find the margin of error if c = 0.98.
Answer:
[tex]E = 14.81\%[/tex]
Explanation:
Given
[tex]n = 150[/tex]
[tex]\sigma = 0.78[/tex]
[tex]c = 0.98[/tex]
Required
The margin of error (E)
This is calculated as:
[tex]E = z * \frac{\sigma}{\sqrt{n}}[/tex]
When confidence level = 0.98 i.e. 98%
The z score is: 2.326
So, we have:
[tex]E = 2.326 * \frac{0.78}{\sqrt{150}}[/tex]
[tex]E = 2.326 * \frac{0.78}{12.247}[/tex]
[tex]E = \frac{2.326 *0.78}{12.247}[/tex]
[tex]E = \frac{1.81428}{12.247}[/tex]
[tex]E = 0.1481[/tex]
Express as percentage
[tex]E = 14.81\%[/tex]
While saving a document to her hard drive, Connie's computer screen suddenly changed to display an error message on a blue background. The error code indicated that there was a problem with her computer's RAM. Connie's computer is affected by a(n) __________.
Answer:
The right answer is "Hardware crash".
Explanation:
According to the runtime error message, this same RAM on your machine was problematic. This excludes file interoperability or compliance problems as well as program error possibilities.Assuming implementation performance problems exist, the timeframe that would save the information would be typically longer, but there's still a lower possibility that the adequacy and effectiveness color will become blue but instead demonstrate warning would appear.Thus the above is the right solution.
Write a method that prints on the screen a message stating whether 2 circles touch each other, do not touch each other or intersect. The method accepts the coordinates of the center of the first circle and its radius, and the coordinates of the center of the second circle and its radius.
The header of the method is as follows:
public static void checkIntersection(double x1, double y1, double r1, double x2, double y2, double r2)
Hint:
Distance between centers C1 and C2 is calculated as follows:
d = Math.sqrt((x1 - x2)2 + (y1 - y2)2).
There are three conditions that arise:
1. If d == r1 + r2
Circles touch each other.
2. If d > r1 + r2
Circles do not touch each other.
3. If d < r1 + r2
Circles intersect.
Answer:
The method is as follows:
public static void checkIntersection(double x1, double y1, double r1, double x2, double y2, double r2){
double d = Math.sqrt(Math.pow((x1 - x2),2) + Math.pow((y1 - y2),2));
if(d == r1 + r2){
System.out.print("The circles touch each other"); }
else if(d > r1 + r2){
System.out.print("The circles do not touch each other"); }
else{
System.out.print("The circles intersect"); }
}
Explanation:
This defines the method
public static void checkIntersection(double x1, double y1, double r1, double x2, double y2, double r2){
This calculate the distance
double d = Math.sqrt(Math.pow((x1 - x2),2) + Math.pow((y1 - y2),2));
If the distance equals the sum of both radii, then the circles touch one another
if(d == r1 + r2){
System.out.print("The circles touch each other"); }
If the distance is greater than the sum of both radii, then the circles do not touch one another
else if(d > r1 + r2){
System.out.print("The circles do not touch each other"); }
If the distance is less than the sum of both radii, then the circles intersect
else{
System.out.print("The circles intersect"); }
}
What do application in productivity suites have in common
Answer:
The function of the suites application is to create presentations and perform numerical calculations.
Explanation:
How are dates and times stored by Excel?
Answer:
Regardless of how you have formatted a cell to display a date or time, Excel always internally stores dates And times the same way. Excel stores dates and times as a number representing the number of days since 1900-Jan-0, plus a fractional portion of a 24 hour day: ddddd. tttttt
Explanation:
mark me as BRAINLIEST
follow me
carry on learning
100 %sure
Given two regular expressions r1 and r2, construct a decision procedure to determine whether the language of r1 is contained in the language r2; that is, the language of r1 is a subset of the language of r2.
Answer:
Test if L(M1-2) is empty.
Construct FA M2-1 from M1 and M2 which recognizes the language L(>M2) - L(>M1).
COMMENT: note we use the algorithm that is instrumental in proving that regular languages are closed with respect to the set difference operator.
Test if L(M2-1) is empty.
Answer yes if and only if both answers were yes.
Explanation:
An algorithm must be guaranteed to halt after a finite number of steps.
Each step of the algorithm must be well specified (deterministic rather than non-deterministic).
Three basic problems:
Given an FA M and an input x, does M accept x?
Is x in L(M)
Given an FA M, is there a string that it accepts?
Is L(M) the empty set?
Given an FA M, is L(M) finite?
Algorithm for determining if M accepts x.
Simply execute M on x.
Output yes if we end up at an accepting state.
This algorithm clearly halts after a finite number of steps, and it is well specified.
This algorithm is also clearly correct.
Testing if L(M) is empty.
Incorrect "Algorithm"
Simulate M on all strings x.
Output yes if and only if all strings are rejected.
The "algorithm" is well specified, and it is also clearly correct.
However, this is not an algorithm because there are an infinite number of strings to simulate M on, and thus it is not guaranteed to halt in a finite amount of time.
COMMENT: Note we use the algorithm for the first problem as a subroutine; you must think in this fashion to solve the problems we will ask.
Correct Algorithm
Simulate M on all strings of length between 0 and n-1 where M has n states.
Output no if and only if all strings are rejected.
Otherwise output yes.
This algorithm clearly halts after a finite number of steps, and it is well specified.
The correctness of the algorithm follows from the fact that if M accepts any strings, it must accept one of length at most n-1.
Suppose this is not true; that is, L(M) is not empty but the shortest string accepted by M has a length of at least n.
Let x be the shortest string accepted by M where |x| > n-1.
Using the Pumping Lemma, we know that there must be a "loop" in x which can be pumped 0 times to create a shorter string in L.
This is a contradiction and the result follows.
COMMENT: There are more efficient algorithms, but we won't get into that.
Testing if L(M) is finite
Incorrect "Algorithm"
Simulate M on all strings x.
Output yes if and only if there are a finite number of yes answers.
This "algorithm" is well specified and correct.
However, this is not an algorithm because there are an infinite number of strings to simulate M on, and thus it is not guaranteed to halt in a finite amount of time.
COMMENT: Note we again use the algorithm for the first problem as a subroutine.
Correct Algorithm
Simulate M on all strings of length between n and 2n-1 where M has n states.
Output yes if and only if no string is accepted.
Otherwise output no.
This algorithm clearly halts after a finite number of steps, and it is well specified.
The correctness of the algorithm follows from the fact that if M accepts an infinite number of strings, it must accept one of length between n and 2n-1.
This builds on the idea that if M accepts an infinite number of strings, there must be a "loop" that can be pumped.
This loop must have length at most n.
When we pump it 0 times, we have a string of length less than n.
When we pump it once, we increase the length of the string by at most n so we cannot exceed 2n-1. The problem is we might not exceed n-1 yet.
The key is we can keep pumping it and at some point, its length must exceed n-1, and in the step it does, it cannot jump past 2n-1 since the size of the loop is at most n.
This proof is not totally correct, but it captures the key idea.
COMMENT: There again are more efficient algorithms, but we won't get into that.
Other problems we can solve using these basic algorithms (and other algorithms we've seen earlier this chapter) as subroutines.
COMMENT: many of these algorithms depend on your understanding of basic set operations such as set complement, set difference, set union, etc.
Given a regular expression r, is Lr finite?
Convert r to an equivalent FA M.
COMMENT: note we use the two algorithms for converting a regular expression to an NFA and then an NFA to an FA.
Test if L(M) is finite.
Output the answer to the above test.
Given two FAs M1 and M2, is L(M1) = L(M2)?
Construct FA M1-2 from M1 and M2 which recognizes the language L(>M1) - L(>M2).
COMMENT: note we use the algorithm that is instrumental in proving that regular languages are closed with respect to the set difference operator.
Test if L(M1-2) is empty.
Construct FA M2-1 from M1 and M2 which recognizes the language L(>M2) - L(>M1).
COMMENT: note we use the algorithm that is instrumental in proving that regular languages are closed with respect to the set difference operator.
Test if L(M2-1) is empty.
Answer yes if and only if both answers were yes.
Which of the following CALL instructions writes the contents of EAX to standard output as a signed decimal integer?
a. call WriteInteger
b. call WriteDec
c. call WriteHex
d. call WriteInt
Answer:
d. call WriteInt
Explanation:
Required
Instruction to write to decimal integer
Of the 4 instructions, the call WriteInt instruction is used write to a decimal integer.
This is so, because the WriteInt instruction writes a signed decimal integer to standard output.
This implies that the output will have a sign (positive or negative) and the output will start from a digit other than 0 (i.e. no leading zero)
Your IaaS cloud company has announced that there will be a brief outage for regularly scheduled maintenance over the weekend to apply a critical hotfix to vital infrastructure. What are the systems they may be applying patches to
Answer: Load Balancer
Hypervisor
Router
Explanation:
The systems that they may be applying the patches to include load balancer, hypervisor and router.
The load balancer will help in the distribution of a set of tasks over the resources, in order to boost efficiency with regards to processing.
A hypervisor is used for the creation and the running of virtual machines. The router helps in the connection of the computers and the other devices to the Internet.
Heinrich Koch is a second-year college student. Last semester his best friend had his laptop stolen. The laptop was an old computer that he planned to replace soon, but the greatest loss was his data: he had not performed a backup and all his data was lost. Heinrich himself does not perform data backups but knows that he needs to do that on a regular basis. He has decided to use an online backup service that will automatically back up his data whenever it changes. Evaluate and compare reviews of online backup services. Consider iDrive, Carbonite, Acronis True Image, BackBlaze, and others you might find in your research. Recommend a service that you consider the best solution for Heinrich. Discuss your reviews and mention speed, security, and features in your recommendation.
Answer:
Acronis True Image is the one I would recommend out of these mentioned online backup services.
Explanation:
The evaluations and reviews of each of the online backup services are as follows:
a. iDrive
For this, we have:
Speed = 60% - fair
Security = 100% - excellent
Privacy = 88% - very good
Features = 95% - excellent
Pricing = 85% - Very good
Because of its various features, pricing, and usability, IDrive reviews suggest that it is a very efficient online backup solution. However, there have been complaints concerning its speed and the fact that there are no monthly plans available.
b. Carbonite
For this, we have:
Speed = 60% - fair
Security = 100% - excellent
Privacy = 87% - very good
Pricing = 85% - very good
File backup and restoration = 75% - good
Carbonite reviews reveal that it is simple to use and provides limitless backup for one device. The main drawback is that it has extremely poor backup speeds.
c. Acronis True Image
This is fast, simple and intuitive
It has complete control over the backup updates, including how and when they occur.
It is not expensive.
Acrnonis True image is a powerful backup storage service. It enables data and file backup and restoration from USB drives.
Many reviewers of Acrnonis True image have stated that they have had no issues with its service, that it is worth purchasing, and that there are no concerns.
d. Backblaze
For this, we have:
Speed = 75% - good
Security = 75% - good
Privacy = 70% - decent
Pricing = 100% - excellent
Support = 95% - excellent
Features = 65% - decent
File back-up and restoration = 70% - decent
Backblaze is one of the most popular internet backup services. This storage service, however, does not allow for ustomization.
Recommendation
Acronis True Image is the one I would recommend out of these mentioned online backup services. This is due to the fact that it delivers a large amount of accurate and high-quality data storage. It is quick, simple and intuitive, which is what most people care about. Furthermore, reviewers have stated that this service is quite effective and that there have been very few issues with it. The other services demonstrate that their services have flaws, such as lack of customization and slowness.
computer is an ............. machine because once a task is intitated computer proceeds on its own t ill its completion.
Answer:
I think digital,versatile
computer is an electronic digital versatile machine because once a task is initiated computer proceeds on its own till its completation.
x-1; while x ==1 disp(x) end, then the result a. infinity or b. (1)
Answer:
1 is the answer because ur trying to trick us
Explanation:
Examine the following output:
4 22 ms 21 ms 22 ms sttlwa01gr02.bb.ispxy.com [154.11.10.62]
5 39 ms 39 ms 65 ms placa01gr00.bb.ispxy.com [154.11.12.11]
6 39 ms 39 ms 39 ms Rwest.plalca01gr00.bb.ispxy.com [154.11.3.14]
7 40 ms 39 ms 46 ms svl-core-03.inet.ispxy.net [204.171.205.29]
8 75 ms 117 ms 63 ms dia-core-01.inet.ispxy.net [205.171.142.1]
Which command produced this output?
a. tracert
b. ping
c. nslookup
d. netstat
Answer:
a. tracert
Explanation:
Tracert is a computer network diagnostic demand which displays possible routes for internet protocol network. It also measures transit delays of packets across network. The given output is produced by a tracert command.
What does Falstaff do to protect himself in battle?
Viết chương trình kiểm tra số nguyên dương N có phải là số nguyên tố không?
Ten examples of an interpreter
Answer:
Some popular examples of today's interpreters are:
Interpreter of PythonInterpreter for RubyPerl performerInterpreter for PHPMATLAB UCSD PascalExplanation:
An interpreter executes the commands directly in an object code or a machine code, written in a program or a scripting language.
The Interpreter can be referred to as system software that can read and execute the programme instead of interpreting programmes. This interpretation includes high-level source code, pre-compiled programmes and scripts.
It is important to note that the interpreter translates programme by programme line, meaning that one statement is translated on one go. This feature makes it easy for programmers to check any line on debugging but slows the whole programme running time.
The compound known as butylated hydroxytoluene, abbreviated as BHT, contains carbon, hydrogen, and oxygen. A 1.501 g sample of BHT was combusted in an oxygen rich environment to produce 4.497 g of CO2(g) and 1.473 g of H2O(g). Insert subscripts below to appropriately display the empirical formula of BHT.
Answer:
C15H24O
Explanation:
n(C) = 4.497 g/44g/mol = 0.1022
Mass of C = 0.1022 × 12 = 1.226 g
n(H) = 1.473g/18 g/mol = 0.0823 ×2 moles = 0.165 moles
Mass of H = 0.0823 × 2 ×1 = 0.165g
Mass of O= 1.501 -(1.226 + 0.165)
Mass of O= 0.11 g
Number of moles of O = 0.11g/16g/mol = 0.0069 moles
Dividing through by the lowest ratio;
0.1022/0.0069, 0.165/0.0069, 0.0069/0.0069
15, 24, 1
Hence the formula is;
C15H24O
Answer
The formula is C1SH240
Write a c++ program to find;
(I). the perimeter of rectangle.
(ii). the circumference of a circle.
Note:
(1). all the programs must allow the user to make his input .
(2).both programs must have both comment using the single line comment or the multiple line comment to give description to both programs.
Answer:
Perimeter:
{ \tt{perimeter = 2(l + w)}}
Circumference:
{ \tt{circumference = 2\pi \: r}}
Just input the codes in the notepad
The following pseudocode describes how a widget company computes the price of an order from the total price and the number of the widgets that were ordered. Read the number of widgets. Multiple the number of widgets by the price per widget of 9.99. Compute the tax (5.5 percent of the total price). Compute the shipping charge (.40 per widget). The price of the order is the sum of the total widget price, the tax, and the shipping charge. Print the price of the order
Answer:
The program in Python is as follows:
widget = int(input("Widgets: "))
price = widget * 9.9
tax = price * 0.55
ship = price * 0.40
totalprice = price + tax + ship
print("Total Price: $",totalprice)
Explanation:
The question is incomplete, as what is required is not stated.
However, I will write convert the pseudocode to a programming language (in Python)
Get the number of widgets
widget = int(input("Widgets: "))
Calculate price
price = widget * 9.9
Calculate the tax
tax = price * 0.55
Calculate the shipping price
ship = price * 0.40
Calculate the total price
totalprice = price + tax + ship
Print the calculated total price
print("Total Price: $",totalprice)
What is the name given to software that decodes information from a digital file so that a media player can display the file? hard drive plug-in flash player MP3
Answer:
plug-in
Explanation:
A Plug-in is a software that provides additional functionalities to existing programs. The need for them stems from the fact that users might want additional features or functions that were not available in the original program. Digital audio, video, and web browsers use plug-ins to update the already existing programs or to display audio/video through a media file. Plug-ins save the users of the stress of having to wait till a new product with the functionality that they want is produced.
Answer:
B plug-in
Explanation:
Edge2022
HELP ITS A TESTTT!!!Which symbol shows auto correct is in use?
A-a white light bulb
B-A green plus sign
C-A flashing red circle
D-A yellow lightning bolt
Answer:
D
Explanation:
The _________ attack exploits the common use of a modular exponentiation algorithm in RSA encryption and decryption, but can be adapted to work with any implementation that does not run in fixed time.
A. mathematical.
B. timing.
C. chosen ciphertext.
D. brute-force.
Answer:
chosen ciphertext
Explanation:
Chosen ciphertext attack is a scenario in which the attacker has the ability to choose ciphertexts C i and to view their corresponding decryptions – plaintexts P i . It is essentially the same scenario as a chosen plaintext attack but applied to a decryption function, instead of the encryption function.
Cyber attack usually associated with obtaining decryption keys that do not run in fixed time is called the chosen ciphertext attack.
Theae kind of attack is usually performed through gathering of decryption codes or key which are associated to certain cipher texts The attacker would then use the gathered patterns and information to obtain the decryption key to the selected or chosen ciphertext.Hence, chosen ciphertext attempts the use of modular exponentiation.
Learn more : https://brainly.com/question/14826269
