The type of wave that occurs where two different mediums meet is known as a transverse wave. Hence, option A is correct.
What are waves?Wave is the regular, systematic spread of disturbances from one location to another. The ripples that travel on water's surface are the most well-known, but waves also exist in sound, sight, and the movement of subatomic particles.
The disturbance periodically oscillates with a set frequency and wavelength in the simplest waves. In contrast to electromagnetic waves, which can travel in a vacuum, mechanical waves, like sound, need a medium to move through. The characteristics of the medium affect how a wave travels across it.
A transverse wave's crest and trough are the high and low points, respectively. The shock absorbers and rarefactions of longitudinal waves are comparable to the troughs and crests of transverse waves. The wavelength is the separation between subsequent crests or troughs.
To know more about Waves:
https://brainly.com/question/3639648
#SPJ2
I will be so thankful if u answer correctly!!
(a) 10N
Explanation:The sketch of the two cases has been attached to this response.
Case 1: The box is pushed by a horizontal force F making it to move with constant velocity.
In this case, a frictional force [tex]F_{r}[/tex] is opposing the movement of the box. As shown in the diagram, it can be deduced from Newton's law of motion that;
∑F = ma -------------------(i)
Where;
∑F = effective force acting on the object (box)
m = mass of the object
a = acceleration of the object
∑F = F - [tex]F_{r}[/tex]
m = 50kg
a = 0 [At constant velocity, acceleration is zero]
Substitute these values into equation (i) as follows;
F - [tex]F_{r}[/tex] = m x a
F - [tex]F_{r}[/tex] = 50 x 0
F - [tex]F_{r}[/tex] = 0
F = [tex]F_{r}[/tex] -------------------(ii)
Case 2: The box is pushed by a horizontal force 1.5F making it to move with a constant velocity of 0.1m/s²
In this case, the same frictional force [tex]F_{r}[/tex] is opposing the movement of the box.
∑F = 1.5F - [tex]F_{r}[/tex]
m = 50kg
a = 0.1m/s²
Substitute these values into equation (i) as follows;
1.5F - [tex]F_{r}[/tex] = m x a
1.5F - [tex]F_{r}[/tex] = 50 x 0.1
1.5F - [tex]F_{r}[/tex] = 5 ---------------------(iii)
Substitute [tex]F_{r}[/tex] = F from equation (ii) into equation (iii) as follows;
1.5F - F = 5
0.5F = 5
F = 5 / 0.5
F = 10N
Therefore, the value of F is 10N
"" describe about black hole ""
#CarryOnLearning
A capacitor with a capacitance of 50µf when connected to a battery of 400 V. The charge and energy stored on it is? a. 0.05 C and 5 J b. 0.05 C and 10 J c. 0.02 C and 4 J d. 0.08 C and 12 J
Answer:
c. 0.02 C and 4 J
Explanation:
Applying,
Q = CV................ Equation 1
Where Q = Charge, C = Capacitance of the capacitor, V = Voltage.
From the question,
Given: C = 50 μF = 50×10⁻⁶ F, V = 400 V
Substitute these values into equation 1
Q = (50×10⁻⁶)(400)
Q = 0.02 C.
Also Applying
E = CV²/2............. Equation 2
Where E = Energy stored.
Therefore,
E = (50×10⁻⁶ )(400²)/2
E = 4 J
Hence the right option is c. 0.02 C and 4 J
6. Which of the following graphs correctly demonstrates the relationship between the
electromagnetic force and distance between charges?
Answer:
But where are the graphs
Coulomb's Law describes the relationship between electromagnetic force and the distance between charges.
What is the relationship between electromagnetic force and the distance between charges?The relationship between electromagnetic force and the distance between charges is described by Coulomb's Law, which states that the force between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, Coulomb's Law is expressed as:
F = k (q₁x q₂) / r²
where F is the electromagnetic force, q1 and q2 are the charges, r is the distance between the charges, and k is the Coulomb constant.
This means that as the distance between two charges increases, the force between them decreases, and as the distance decreases, the force increases. The relationship between force and distance is inverse square, which means that the force decreases rapidly as the distance increases.
To know more about electric charges follow
https://brainly.com/question/874116
#SPJ6
what is unit of pressure?why is it called a derived unit ? give reasons
Answer:
Unit of pressure is pascal (Pa)
The SI-derived unit of measurement for pressure. The pascal is one newton (an SI-derived unit itself) per square meter.
The free-body diagram of a crate is shown.
What is the net force acting on the crate?
Answer:
B
Explanation:
The top and bottom forces cancel each other. The left is more than the right so we "add" them --> -352+176=-176
-176(aka 176 to the left)
Answer:
176 to the left.
Explanation:
edge2020
What the answer to the three of them ill mark brainlest
lhormmia masng ies igentetel
Explanation:
According to the theory of plate tectonics, the lithosphere is separated into sections that are called tectonic plates. These plates move in different directions in response to the forces in Earth’s mantle beneath them. Which of the following correctly matches the plate movement with its description?
convergent boundary; plates move away from one another causing rift valleys and the formation of new crustal material
transform boundary; plates slide past one another in opposite directions causing the formation of faults and earthquakes
divergent boundary; as the plates come together gravity pushes the edge of one plate underneath the edge of a neighboring plate
subduction zone; as the plates come together increased pressure causes the plates to fault and fracture leading to the formation of mountains
Answer:
The correct answer is - transform boundary; plates slide past one another in opposite directions causing the formation of faults and earthquakes.
Explanation:
If the continental or oceanic plates slide past one another either in the same direction or in opposition direction forms the transform fault boundary. Due to this tectonic plate formation, no new crust is formed or subducted, but earthquake activities forms.
Convergent boundaries forms by pushing the edge of one plate underneath the other while coming together whereas plates move away from one another causing rift valleys called divergent boundary.
Which of the following measurements require the use of scientific notation?
A. The length of your hair
B. The distance to the sun
C. The width of your hand
D. Distance to Indianapolis in miles
Which of the motion variables is the same in both thex and y axis?
A) velocity
B) acceleration
C) time
D) displacement
Answer:
Acceleration (b) not sure tho
Explanation:
Henry mixed salt and water together in a cup until he observed a clear solution. He measured the mass of the solution. Then he placed the cup outside for several sunny days during the summer. After a week, he observed that only solid salt remained in the cup and the mass had decreased. Henry concluded that a physical and chemical change occurred in this investigation.
Which statements correctly defend or dispute his conclusion?
He is correct. Dissolving salt in water is a physical change, but evaporating the water is a chemical change. Formation of a solid is evidence that a chemical change occurred.
He is correct. Evaporation is a physical change, but dissolving salt in water is a chemical change. The change in mass is evidence that a chemical change occurred.
He is incorrect. Dissolving salt in water and evaporation of the water are both physical changes. The reappearance of salt is evidence that the change was reversible by a physical change, so it could not be a chemical change.
He is incorrect. Dissolving salt in water and evaporation of the water are both chemical
Answer:
He is incorrect. Dissolving salt in water and evaporation of the water are both physical changes. The reappearance of salt is evidence that the change was reversible by a physical change, so it could not be a chemical change.
Answer:c
Explanation:
Describe the parts of the wheel and axle
Answer:
A simple machine that may be used the most often is called the wheel and axle. The wheel and axle has two basic parts: wheel and axle. It has two circular objects which includes a larger disc and a small cylinder both joined at the center.
Explanation:
Explanation:
A simple machine that may be used the most often is called the wheel and axle. The wheel and axle has two basic parts: wheel and axle. They can be found everywhere. It has two circular objects which includes a larger disc and a small cylinder both joined at the center.The large disc is the wheel, and the small cylinder or rod is the axle. There may be two wheels attached to the axle.
There are two basic ways a wheel and axle can work together to help move things.
1. The Force is applied to the Wheel
For example, a screwdriver is an example of a wheel and axle. The handle is the wheel where the force is applied. It turns or spins and increases the force of the shaft or axle, which helps turn the screw.
Another example of force being applied to the wheel is when a doorknob is turned. The wheel (doorknob) is turned and the locking mechanism connected to the shaft turns and the door can then be opened.
2. The Force is applied to the Axle
A Ferris wheel is an example of force being applied to the axle. When the axle turns it results in the giant wheel turning. The wheel is much larger than the axle and covers more distance and area. A ceiling fan works the same way.
Gravitational potential energy is always calculated with
kinetic energy
mechanical energy
total potential energy
mass gravity and height
Answer:
kinetic energy as it involves dispersal of energy
Figure 1.18 shows an oscillating pendulum. If the time taken for the pendulum to swing from A to C to B is 3 s, what is the period of the pendulum?
Answer:
a
Explanation:
A body at rest or moving with uniform velocity will have acceleration equals
to:
A.
1
B.
0
C.
Negligible
D.
Infinity
Answer:
B:O
Explanation:
As acceleration is the rate of change of velocity with time, if velocity is uniform, there will be no change in it and acceleration will be zero.
Calculate the momentum of a 4,800 kg car with a velocity of 25 m/s.
Answer:
p = 120000 kg · m/s
Explanation:
p = mv
p=momentum
m=mass
v=velocity
p = (4800)(25)
p= 120000 kg · m/s
Answer:
[tex]momentum = mass \times velocity \\ = 4800 \times 25 \\ = 120000 \: kgm {s}^{ - 1} [/tex]
(02.06)plz help me 20 points
Answer:
the answer is 80 degrees
Explanation:
Which of the following statements is false?
A. Weight is a vector quantity
B. Weight is measured in newtons, N
C. The weight of an object is the same on the Earth and the moon
Answer:
C
Explanation:
The weight of an object is 1/6 of the earth's weight in the moon
For example if your weight is 54 kg on earth,
Weight on moon=1/6 of 54=1/6 x 54 = 9kg
Answer:
C. The weight of an object is the same on the Earth and the moon
Explanation:
The mass of an object is ⅙ of earth's weight on moon. So, option (C) is the false statement.
IF YOU ANSWER I WILL MARK YOU BRAINLIEST
PPLLSSS
Answer:
the mushrooms
mushrooms are decomposers because they break down organic material around them.
find out the speed of the car from home to school in meters per second.
Time - 15 mins
Distance - 8 km
1.875
Explanation:
speed = distance moved ÷ time taken
A 8.6*10^ -6 C charge is places 1.00 m away from a 2.3 * 10 ^ - 4 * C charge. How large is the force of repulsion between the two charges?
Answer:
The force of repulsion is 17.802 N
Explanation:
Given;
magnitude of the first charge, q₁ = 8.6 x 10⁻⁶ C
magnitude of the second charge, q₂ = 2.3 x 10⁻⁴ C
distance between the two charges, r = 1 m
The force of repulsion is calculated using Coulomb's law;
[tex]F = \frac{Kq_1q_2}{r^2} \\\\F = \frac{9\times 10^9 \times 8.6\times 10^{-6} \times 2.3\times 10^{-4}}{1^2} \\\\F = 17.802 \ N[/tex]
Therefore, the force of repulsion is 17.802 N
the refractive index of rock salt with respect to water is 1.17. What will be the refractive index of water with respect to rock salt
Answer:
1.17
Explanation:
Given that,
The refractive index of rock salt with respect to water is 1.17.
We need to find the refractive index of water with respect to rock salt.
We know that,
Refractive index = (speed of light in air or vaccum)/( speed of light in that medium)
Refractive index of rock salt with respect to ice = (speed of light in ice)/(speed of light in rock salt)
The speed of light in ice = c/1.31
The speed of light in rock salt = c/1.54
Required refractive index,
[tex]\mu=\dfrac{1.54}{1.31}\\\\=1.17[/tex]
So, the refractive index of water with respect to rock salt is equal to 1.17.
A person riding a bike has a total mass of 95 kg, if the person bike system is moving at a velocity of 5 m/s, how much kinetic energy is there?
Answer:
Kinetic energy is 1187.5J
Hi whats this plss???
Answer:
a) ball K <K₀, b) the speed of the ball after the collision, c) can K> 0
d) can moves in the same direction as the ball
Explanation:
a) the kinetic energy is given by
K = ½ M v²
in this case before the collision the kinetic energy of the ball is
K₀ = ½ M v₀²
After the collision the aluminum can has a certain speed, therefore the kinetic energy of the ball must decrease, the velocity of the ball after the collision is
v <v₀
therefore the kinetic energy is
K = ½ m v²
in consecuense
K <K₀
b) an evidence of this fact is to measure the speed of the ball before the collision and the speed of the ball after the collision,
c) In the case of the aluminum can, the initial kinetic energy is ero, because it is stopped
K₀ = 0
after the collision a part of the cal momentum of the ball is transferred to the can, therefore its velocity is different from zero
K = ½ m v_can²
K> 0
d) the clearest evidence of this fact is that the can moves in the same direction as the ball
Which of the following is an example of uniform circular motion?
A. A meteoroid falling to Earth
B. A comet orbiting the Sun in an elliptical orbit
C. A rocket traveling to the Moon
D. A satellite making a circular orbit around Earth
please help
When a car velocity is negative and its acceleration is negative, what is happening to the cars motion?
Answer:
The car is speeding up in a negative direction.
Explanation:
The atomic mass of calcium is 40.08. What is the mass of 6.02 × 1023 atoms of calcium?
Answer:
It is 40.08 g
Explanation:
[tex]6.02 \times 10 {}^{23} \: atoms = 1 \: mole = 40.08 \: g[/tex]
Which two pairs of labeled stars (A-G) in the diagram have the same temperature?
Answer:
Please find the graph file in the question:
Explanation:
The D and E will be having the same temperature as they lie on the same line drown from the temp axis if it was drawn.
When a shopping cart rolls into a parked car on the street, It hits the car with a force of 220 newtons. The shopping cart experiences a force from the car that is how many newtons?
Answer:
220 N
Explanation:
When a shopping cart rolls into a parked car on the street, it hits the car with a force of 220 newtons.
We need to find the force the shopping cart experiences from the car.
We know that, Newton's third law of motion states that for every action there is an equal and opposite reaction.
Hence, the shopping cart experiences a force of 220 N from the car.
True Or False? Stars glow because they produce energy by the process of nuclear fission.
Answer:
yes is the correct snswer
Explanation:
hope this help
