Question 1 of 10
2 Points
An engineering team is conducting a wind tunnel test to examine the
aerodynamics of a car it has designed. Which part of the engineering process
is the team in?
O A. Do the work.
O B. Evaluate the results.
O C. Improve and redesign.
D. Identify a need.
SUBMIT​

Answers

Answer 1

Explanation:

Evaluate the results, letter B


Related Questions

You weighed out 0.020 g of your crude aspirin product in order to determine the amount of salicylic acid impurity. Following the procedure outlined in the manual, you dissolved the solid and diluted the solution to a final volume of 10.0 mL. If the absorbance of your sample solution was 1.07, what was the percent salicylic acid in your product

Answers

Answer:

The correct answer is 7.8 percent.

Explanation:

As mentioned in the given question, the absorbance (A) of the sample solution is 1.07. To find the concentration of aspirin, Beer's law is used, that is, A = ebc

Here, e is the extinction coefficient, which is equal to 139.322 M^-1cm^-1 as per the standard value for salicylic acid, b is the pathlength, which is equivalent to 1 cm. Now putting the values we get,  

A = ebc

c = A / (eb)

c = 1.07 / (139.322 × 1)

c = 0.00768 M

Now to determine the percent salicylic acid in the sample, there is a need to compare the value of concentration determined with the concentration of aspirin given initially.  

0.02 grams is the initial concentration of aspirin mentioned in the question. The molar mass of aspirin is 240 g/mol.  

Therefore, the moles of aspirin will be,  

0.02 / 240 = 8.33 × 10^-5 moles  

The final volume of the diluted solution given is 10 ml or 0.01 liters.  

The molarity of aspirin in the diluted solution will be,  

c1 = 8.33 × 10^-5 / 0.01 = 8.33 × 10^-3 M or 0.00833 M

Now, the percent of salicylic acid in the product will be,  

c1 - c / c1 × 100

(0.00833 - 0.00768) / 0.00833 × 100 = 7.8 %

Absorbance is directly proportional to the concentration of the solution. The absorbance can be calculated if the molar absorptivity, path length, and concentration of the absorbing species are known.

The percent of salicylic acid in the solution is 7.8%

Given that:

Absorbance of the solution is = 1.07

Path length = 1 cm.

Applying Beer's Law,

A = ε b c

where,

c = concentration, A = absorbance, ε = constant, and b = path length

Now, putting the values in above equation

c = [tex]\dfrac{\text{A}}{\text {(e b)}}[/tex]

c = [tex]\dfrac{1.07}{139.32 \times 1}[/tex]        ( ε = 139.32)

c = 0.00768 M

Now, to calculate the percent of the salicylic acid in the solution, we will compare the given concentration of the aspirin.

As we know:

Given mass of aspirin = 0.02 g

Molar mass of aspririn = 240

Number of moles of aspirin = 0.02 / 240 = 8.33 x 10⁻⁵

Now, the molarity of aspirin is:

[tex]\text{Molarity}&= \dfrac{8.33 \times 10^{-5}}{0.01}\\\\\text{Molarity}&= 8.33 \times 10^{-5}[/tex]

Now, the percent of the salicylic acid is:

[tex]\dfrac{\text {C}_1 - \text C}{\text {C}_1 \times 100}[/tex]

[tex]\dfrac{(0.00833 - 0.00768)}{0.00833 \times 100}[/tex]

Percent of Salicyclic acid = 7.8%.

Thus, the percentage of the salicylic acid in the given solution is 7.8%.

To know more about Absorbance, refer to the following link:

https://brainly.com/question/17062521

Question 17 In the Haber reaction, patented by German chemist Fritz Haber in 1908, dinitrogen gas combines with dihydrogen gas to produce gaseous ammonia. This reaction is now the first step taken to make most of the world's fertilizer. Suppose a chemical engineer studying a new catalyst for the Haber reaction finds that 786. liters per second of dinitrogen are consumed when the reaction is run at 222.°C and 0.35atm. Calculate the rate at which ammonia is being produced. Give your answer in kilograms per second. Round your answer to 2 significant digits.

Answers

Answer:

Explanation:

N₂       + 3H₂     =     2 NH₃

1 vol                         2 vol

786 liters               1572 liters

786 liters of dinitrogen will result in the production of 1572 liters of ammonia

volume of ammonia V₁ = 1572 liters

temperature T₁ = 222 + 273 = 495 K

pressure = .35 atm

We shall find this volume at NTP

volume V₂ = ?

pressure = 1 atm

temperature T₂ = 273

[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]

[tex]\frac{.35\times 1572}{495} =\frac{1\times V_2}{ 273 }[/tex]

[tex]V_2 =303.44[/tex] liter .

mol weight of ammonia = 17

At NTP mass of 22.4 liter of ammonia will have mass of 17 gm

mass of 303.44 liter of ammonia will be equal to (303.44 x 17) / 22.4 gm

= 230.28 gm

=.23 kg / sec .

Rate of production of ammonia = .23 kg /s .

What should happen if a good experiment is replicated?
The results will decrease.
The results will increase.
The results will be different.
The results will be similar.

Answers

Answer:

The results will be similar.

The results will be similar

A sample of gas occupies a volume of 120.0mL at a pressure of 0.75atm and a temperature of 295K. What will the volume be at a pressure of 1.25
atm and a temperature of 345K?

A)48mL

B)84mL

C)8mL

D)4mL

Answers

Answer:

A) 84 mL

Explanation:

use general gas equation P1×V1 / T1 = P2×V2/T2

rearrange the formula and solve for V2,it should give you V2= 84mL

Answer:

[tex]\large \boxed{\text{B) 84 mL}}[/tex]

Explanation:

We can use the Combined Gas Laws to solve this problem .

[tex]\dfrac{p_{1}V_{1} }{T_{1}} = \dfrac{p_{2}V_{2}}{T_{2}}[/tex]

Data

p₁ = 0.75 atm; V₁ = 120.0 mL; T₁ = 295 K  

p₂ = 1.25 atm; V₂ = ?;              T₂ = 345 K

Calculations

[tex]\begin{array}{rcl}\dfrac{p_{1}V_{1} }{T_{1}} & = & \dfrac{p_{2}V_{2}}{T_{2}}\\\\\dfrac{\text{0.75 atm $\times$ 120.0 mL}}{\text{295 K}} & = & \dfrac{\text{1.25 atm} \times V_{2}}{\text{345 K}}\\\\\text{0.305 mL} & = & \text{0.003 523V}_{2}\\V_{2}& =& \dfrac{\text{0.305 mL}}{0.003523}\\\\& = & \textbf{84 mL}\\\end{array}\\\text{The new volume of the gas is $\large \boxed{\textbf{84 mL}}$}[/tex]

Free radical mono-halogenation of an alkane is typically conducted using bromine versus chlorine because A.the bromine radical is more reactive and therefore more selective. B.the chlorine radical is more reactive and therefore more selective. C.the chlorine radical is less reactive and therefore more selective. D.the bromine radical is less reactive and therefore more selective. E.none of these choices.

Answers

Answer:Free radical mono-halogenation of an alkane is typically conducted using bromine versus chlorine because the bromine radical is less reactive and therefore more selective.

Explanation: Halogenation occurs when a halogen replaces  one or more hydrogen atoms in an organic compound ie  chlorine or  bromine with the reactivity of the halogens decreasing  in the order of  F2 > Cl2 > Br2 > I2

Since fluorine reacts  explosively making it is difficult to control, and iodine is unreactive. Free radical mono-halogenation of an alkane is typically conducted using bromine versus chlorine  with Chlorination  ie chlorine radical being more reactive and not selective and the Bromination of alkanes ie bromine radical  occurring similarly but slower and less reactive but  more selective which is due to the fact that a bromine atom is less reactive in  the hydrogen abstraction  than a chlorine atom evidence in the  higher bond energy of H-Cl than H-Br.

Identifying the Body's Responses to
Quick
Check
Which type of response identifies a specific pathogen in the body?
A(n)
response

Answers

Answer:

Specific Immune Response

Explanation:

A specific immune response identifies the pathogen which then allows it to produce antibodies that protect against that SPECIFIC pathogen.

Answer:

immune

Explanation:

a fertilizer manufacturer makes a batch of 20kg of ammonium nitrate. what mass of ammonia in kg, does the manufacturer need to start with?

Answers

Answer:

[tex]m_{NH_3}=4.25kgNH_3[/tex]

Explanation:

Hello,

In this case, for the production of ammonium nitrate we shall consider the following chemical reaction:

[tex]NH_3+HNO_3\rightarrow NH_4NO_3[/tex]

Hence, since the molar mass of ammonium nitrate is 80 g/mol and the molar mass of ammonia is 17 g/mol, we could compute the required mass of ammonia to produce 20 kg of ammonium nitrate  by using kilo-based units:

[tex]m_{NH_3}=20kgNH_4NO_3*\frac{1kmol}{80kgNH_4NO_3}*\frac{1kmolNH_3}{1kmolNH_4NO_3}*\frac{17kgNH_3}{1kmolNH_3} \\\\m_{NH_3}=4.25kgNH_3[/tex]

Best regards.

If you have 67.31g of CH4, how many moles do you have?

Answers

Answer:

If you have 67.31 g of CH₄, you have 4.21 moles

Explanation:

To know the amount of moles if you have 67.31 g of CH₄, you must know the molar mass, that is, the mass of one mole of a substance, which can be an element or a compound.

On the periodic table, the molar mass of the elements, also called the atomic mass or atomic weight, can be found at the bottom of the element. In this case:

C: 12 g/moleH: 1 g/mole

To calculate the molar mass of a compound, the molar mass of the elements of the compound must be added multiplied by the times they appear. So in this case the molar mass of CH₄ is:  

CH₄= 12 g/mole + 4* 1 g/mole= 16 g/mole

Now you can apply the following rule of three: if 16 g are contained in 1 mole of CH4, 67.31 g in how many moles are present?

[tex]moles=\frac{67.31 g*1 mole}{16 g}[/tex]

moles= 4.21

If you have 67.31 g of CH₄, you have 4.21 moles

CH³C⁴HCOCH³ how many atoms of each element are in one molecule of 2-heptanone

Answers

Answer:

- 7 carbon atoms.

- 14 hydrogen atoms.

- 1 oxygen atom.

Explanation:

Hello,

In this case, for the given compound, heptanone, whose chemical formula is:

[tex]CH_3COCH_2CH_2CH_2CH_2CH_3[/tex]

We can write the molecular formula showing the present atoms of each element:

[tex]C_7H_{14}O[/tex]

In such a way we have:

- 7 carbon atoms.

- 14 hydrogen atoms.

- 1 oxygen atom.

Best regards.

If 120.4 grams of reactant completely breaks down (decomposes) to produce 106.4 grams of chlorine. What mass of nitrogen gas could be expected? *

Answers

Answer:

[tex]m_{nitrogen}=14g[/tex]

Explanation:

Hello,

In this case, since we are talking about a chemical reaction in which a compound having nitrogen and chlorine is decomposed into chlorine and nitrogen, we must remember that the law of conservation of mass must be obeyed, for that reason, we notice that the mass of the whole reactants must equal the mass of the whole products, as shown below:

[tex]m_{reactants}=m_{products}[/tex]

Next, we know there is only one single reactant and products are constituted by both chlorine and nitrogen:

[tex]m_{reactant}=m_{chlorine}+m_{nitrogen}[/tex]

In such a way, we can compute the mass of nitrogen as shown below:

[tex]m_{nitrogen}=m_{reactant}-m_{chlorine}=120.4g-106.4g\\\\m_{nitrogen}=14g[/tex]

Best regards.

The percent yield of a reaction in which 52 grams of a reactant is expected to yield 30 grams of product is 25%. What is the actual yield of the reaction? A) 13 grams B) 120 grams C) 208 grams D) 7.5 grams

Answers

Answer:

D) 7.5 grams

Explanation:

Hello,

In this case, since the percent yield is defined by:

[tex]Y=\frac{m^{actual}}{m^{theoretical}} *100\%[/tex]

In such a way, since the percent yield is up to 25% and the expected or theoretical amount is 30 g of the product, the actual yield of the reaction is:

[tex]m^{actual}=\frac{Y*m^{theoretical}}{100\%} =\frac{25\%*30g}{100\%} \\\\m^{actual}=7.5g[/tex]

Therefore the answer is D) 7.5 grams.

Best regards.

2. What happens to the pH when you add more H+ ions to a solution that has no buffers?

Answers

It will go over the amount it needs to.

State whether the following is an example of a physical or chemical change:! 21. Burning a log: ________________________________! 22. Folding a piece of paper: _________________________! 23. Freezing water: _________________________! 24. Bending a copper wire. _________________________!

Answers

Answer:

Physical change

Explanation:

Because it doesn't require any chemical to change

Answer:

Physical change

Physical change

Physical change

Physical change

Explanation:

Problem PageQuestion Sulfur dioxide and oxygen react to form sulfur trioxide during one of the key steps in sulfuric acid synthesis. An industrial chemist studying this reaction fills a 500. mL flask with 1.3 atm of sulfur dioxide gas and 4.1 atm of oxygen gas, and when the mixture has come to equilibrium measures the partial pressure of sulfur trioxide gas to be 0.91 atm. Calculate the pressure equilibrium constant for the reaction of sulfur dioxide and oxygen at the final temperature of the mixture. Round your answer to 2 significant digits.

Answers

Answer:

SO₂: 0.39atm

O₂: 3.645atm

Explanation:

Based on the reaction:

2 SO₂(g) + O₂(g) → 2 SO₃(g)

2 moles of sulfur dioxide react per mole of oxygen to produce 2 moles of sulfur trioxide.

When the reaction occurs an comes to equilbrium, the partial pressure of each gas is:

SO₂: 1.3atm - 2X

O₂: 4.1atm -X

SO₃: 2X

Where X is the reaction coordinate.

As pressure at equilibrium of SO₃ is 0.91 atm:

0.91atm = 2X

Thus: X = 0.455atm.

Replacing, pressures at equilibrium of the gases are:

SO₂: 1.3atm - 2×0.455atm = 0.39 atm

O₂: 4.1atm -0.455atm = 3.645 atm

what is the reaction?

Answers

Answer:

A chemical reaction is a process in which one or more substances, also called reactants, are converted to one or more different substances, known as products. ... A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.

Explanation:

Hopefully this is what you needed

Metamorphic rocks directly form from

Answers

Answer:

Metamorphic rocks are formed from pre-existing rock and sediment materials. They are formed when igneous, sedimentary, or other pre-existing metamorphic rocks are exposed to the heat and pressure as well as super-heated mineral-rich fluids. They are compacted together to form a new rock altogether. Metamorphism does not include the melting or liquefaction of the pre-existing rock. Instead, it compacts them and crushes them, pushing them together at extreme heat and pressure to form a new rock altogether composed of sedimentary, igneous, and other metamorphic rock. It's the rock hybrid of the geologic world.

Metamorphism is similar to when you squish playdough together, it doesn't form a new playdough color (unless you REALLY mixed that poor playdough together). It forms an amalgamation of different colors and patterns made from the other rock.

Taken from a paper I once wrote I explained this again:

"Metamorphic rocks are formed when pre-existing rocks and their minerals are compressed and altered by Earth’s internal processes; interior pressure, temperature (heat), and chemical reactions. The minerals and pre-existing rock necessary for the creation of metamorphic rock must then also be located deep underground if such processes are expected to make an impact and create a metamorphic rock."

PLEASEEEE help! BRAINLIEST to right answer!!!!

Answers

Answer:

D

Explanation:

No energy is lost during transforming into another because energy cannot be reated or destroyed

Answer:

i think is d

Explanation:

I'm not sure wait for a few more answers

Plants remove carbon to the atmosphere during

Answers

Answer:

respiration

Explanation:

Plants give out carbon dioxide not only at night but during the day too. It happens because of the process of respiration in which plants take in oxygen and give out carbon dioxide. As soon as the sun rises another process called photosynthesis starts, in which carbon dioxide is taken in and oxygen is given out.

Plants use photosynthesis to capture carbon dioxide and then release half of it into the atmosphere through respiration. Plants also release oxygen into the atmosphere through photosynthesis

Use the nuclear decay reaction in the picture to answer the following question.

i. How does the reaction demonstrate the laws of conservation of charge and conservation of nucleon number?


ii. What is the binding energy of one mole of atomic mass: 234, number of proton: 90, Thorium if the mass defect is 1.908 g/mol?

Answers

Answer:

1a. Both sides of the decay reaction have the same charge.

b. The number of nucleons on both sides are the same.

2. The binding energy of one mole of the atom is 17.172 × [tex]10^{16}[/tex] J.

Explanation:

1a. Considering the two sides of the decay reaction and with respect to the law of conservation of charge, it can be observed that both sides have the same charge. Charge can not be created or destroyed in the process.

b. The number of nucleons on both sides are equal. No nucleon is created or destroyed in the process.

2. Binding energy is the minimum energy required to separate an atom into its nucleons. From Einstein's energy equation;

             E = Δm[tex]c^{2}[/tex]

Where E is the binding energy of the atom, Δm is the mass defect and c is the speed of light.

Given that: Δm = 1.908 g/mol and c = 3 × [tex]10^{8}[/tex]. So that:

           E = 1.908 × [tex](3*10^{8}) ^{2}[/tex]

              = 1.908 × 9 × [tex]10^{16}[/tex]

              = 17.172 × [tex]10^{16}[/tex] J

The binding energy of one mole of the atom is 17.172 × [tex]10^{16}[/tex] J.

0.5 moles of CO2 have a volume of 50 L and a pressure of 0.8210 atm. What must be the temperature of the gas?

Answers

Answer:

1000 K

Explanation:

Given data

Moles of carbon dioxide (n): 0.5 molesVolume of carbon dioxide (V): 50 litersPressure of carbon dioxide (P): 0.8210 atmospheresTemperature of carbon dioxide (T): ?

We can find the temperature of carbon dioxide using the ideal gas equation.

[tex]P \times V = n \times R \times T\\T = \frac{P \times V}{n \times R} = \frac{0.8210atm \times 50L}{0.5mol \times \frac{0.08206atm.L}{mol.K} }=1000 K[/tex]

The temperature of the gas is 1000 K.

What is another term for anode?

Answers

Answer:positive electrode

Explanation:

Anode can also be referred to as positive electrode in a cell

The temperature of a 350. mL sample of gas increases from 27 °C to 227 °C. What is the final volume of the sample of gas, if the pressure and amount of gas in the container is kept constant?
Group of answer choices

Answers

Answer:

[tex]V_2=583.3mL[/tex]

Explanation:

Hello,

In this case, for the given constant amount and pressure of the, we apply the Charles' law which allows us to understand the volume-pressure behavior as a directly proportional relationship:

[tex]\frac{V_1}{T_1} =\frac{V_2}{T_2}[/tex]

Thus, since we need to compute the volume after the temperature increase (which must be expressed in absolute Kelvins), we obtain V2 as:

[tex]V_2=\frac{V_1T_2}{T_1} =\frac{350.0mL*(227+273.15)K}{(27+273.15)K}\\ \\V_2=583.3mL[/tex]

Best regards.

dentify the missing information for each atom or ion. Note that the atoms and ions are not necessarily neutral. A Se ion has a mass number of 78 and a charge of −2 . Determine the number of neutrons, protons, and electrons in this ion. number of neutrons: 44 number of protons: 34 number of electrons: 36 An ion has a mass number of 65, 36 neutrons, and a charge of +1 . Identify the element symbol, and determine the number of protons and electrons in this ion. element symbol: Cu number of protons: 30 number of electrons: 29 An atom or ion has 43 neutrons , 36 protons, and 36 electrons. Identify the element symbol, and determine the mass number and charge for this atom or ion. element symbol: Au mass number: 79 charge: 0

Answers

Answer:

Check the explanation

Explanation:

1)

Atomic number of Se = 34

So, number of proton = 34

use:

charge = number of proton - number of electron

-2 = 34 - number of electron

number of electron = 36

number of neutron = mass number - atomic number

= 78 - 34

= 44

Answer:

44

34

36

2)

number of proton = mass number - number of neutron

= 65 - 36

= 29

29 is atomic number for Cu

use:

charge = number of proton - number of electron

+1 = 29 - number of electron

number of electron = 28

Answer:

Cu

29

28

3)

Atomic number is 36 for Kr

use:

charge = number of proton - number of electron

= 36 - 36

= 0

use:

mass number = number of proton + number of neutron

= 36 + 42

= 78

Answer:

Kr

78

0

In a titration, 100 mL of 0.026 M HCl (aq) is neutralized by 13 mL of KOH(aq). Calculate the molarity of KOH (aq).

Answers

Answer:

0.2M

Explanation:

Step 1:

Data obtained from the question.

Volume of acid (Va) = 100mL

Molarity of the acid (Ma) = 0.026 M

Volume of base (Vb) = 13mL

Molarity of the base (Mb) =..?

Step 2:

The balanced equation for the reaction. This is given below:

HCl + KOH —> KCl + H2O

From the balanced equation above,

The mole ratio of the acid (nA) = 1

The mole ratio of the base (nB) = 1

Step 3:

Determination of the molarity of the base, KOH. This can be obtained as follow:

MaVa/MbVb = nA/nB

0.026 x100 / Mb x 13 = 1

Cross multiply to express in linear form

Mb x 13 = 0.026 x 100

Divide both side by 13

Mb = 0.026 x 100 / 13

Mb = 0.2M

Therefore, the molarity of the base, KOH is 0.2M

Answer:

0.2M

Explanation:

KOH(aq) + HCl(aq) ⇒  KCl(aq) + H2O(l)

We express the moles of analyte (HCl) and titrant based (KOH) on their molar concentration:

M1 * V1 = M2 * V2

The molarity of the solution is calculated with the following equation:

M2 = V1 x M1 / ​​V2

Where:

V2 = valued sample volume

V1 = volume of titrant consumed (measured with the burette)

M1 = concentration of titrant solution

M2 = concentration of sample

M2 = 100mL * 0.026M / 13mL = 0.2M

The image shows two different species. the image is a dog and a lizered
Which is a shared characteristic of these two species?
tail
scales
hair
body shape

Answers

Answer:

the tail

Explanation:

Answer:

A.) tails

Explanation:

Gaseous butane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 42. g of butane is mixed with 150. g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Round your answer to significant digits.

Answers

Answer:

127 grams of carbon dioxide

Explanation:

We need to determine the chemical equation first. Butane has a chemical formula of [tex]C_4H_{10}[/tex], oxygen is [tex]O_2[/tex], carbon dioxide is [tex]CO_2[/tex], and water is [tex]H_2O[/tex]. The reactants are butane and oxygen and the products are carbon dioxide and water. So we write:

[tex]C_4H_{10}+O_2[/tex] ⇒ [tex]CO_2+H_2O[/tex]

But remember! We need to balance this. Currently, there are 4 carbon atoms (C), 10 hydrogen atoms (H), and 2 oxygen atoms (O) on the left, while there are 1 carbon atom (C), 2 hydrogen atoms (H), and 3 oxygen atoms (O) on the right. Let's place a coefficient of 4 in front of the carbon dioxide and a coefficient of 5 on the water, so that we have equal numbers of carbon and hydrogen atoms on each side:

[tex]C_4H_{10}+O_2[/tex] ⇒ [tex]4CO_2+5H_2O[/tex]

However, we need to ensure that there are equal numbers of O atoms, as well. On the left, we have 2 and on the right we have 13, so let's put a coefficient of 6.5 on the oxygen:

[tex]C_4H_{10}+6.5O_2[/tex] ⇒ [tex]4CO_2+5H_2O[/tex]

Finally, multiply everything by 2 to get whole number coefficients:

[tex]2C_4H_{10}+13O_2[/tex] ⇒ [tex]8CO_2+10H_2O[/tex]

Ah, now we can actually get to the problem!

We need to determine the limiting reactant, so let's convert the 42 g of butane and 150 g of oxygen into moles of any product, say, carbon dioxide. To convert to moles, we need to find the molar mass of each compound.

The molar mass of butane is 4 * 12.01 + 10 * 1.01 = 58.14 g/mol, while the molar mass of oxygen is 2 * 16 = 32 g/mol. We can now set up the equations:

[tex]42 gC_4H_{10}*\frac{1molC_4H_{10}}{58.14gC_4H_{10}} *\frac{8molCO_2}{2molC_4H_{10}} =2.8896molCO_2[/tex]

[tex]150 gO_2*\frac{1molO_2}{32gO_2} *\frac{8molCO_2}{13molO_2} =2.8846molCO_2[/tex]

Clearly, we see that 2.8846 < 2.8896, which means that oxygen is the limiting reactant. In other words, the most products can be made when the oxygen is all used up.

Now let's finally convert moles of carbon dioxide into grams by multiplying by its molar mass, which is 12.01 + 2 * 16 = 44.01 g/mol:

[tex]2.8846molCO_2*\frac{44.01gCO_2}{1molCO_2} =127gCO_2[/tex]

Notice that we have 3 significant figures because we had 3 significant figures at the start with 150. grams of oxygen.

~ an aesthetics lover

How is a niche different than a habitat?

A habitat is more than a physical place; it's a species' role in a specific place and it can change from niche to niche.

A niche is more than a physical place; it's a species' role in a specific place and it can change from habitat to habitat.

A niche and a habitat are the same.

A niche is just a physical place; a habitat is a species' role in a specific place.

Answers

Answer:

A niche is more than a physical place; it's a species' role in a specific place and it can change from habitat to habitat.                  

Explanation:

Niche: In biology, the term "niche" is described as a process through which different organisms tends to fit-in into a specific ecosystem or an ecological community. However, a niche is considered as the "evolutionary result" of a specific species behavioral, morphological, and physiological adaptations associated with its surroundings.

Habitat: In biology, the term "habitat" is described as an environmental or ecological area that is being inhabited by a specific species of plants, animals, or other organisms.

Therefore, a niche is entirely different from a habitat because an organism's niche tends to explain every different aspect of its life whereas its habitat explains the place it lives.

If you start with 6 mol of nitrogen gas (N2+) what mass (g) of ammonia (NH4) will be produced?

Answers

Answer:

204g of NH3

Explanation:

The balanced equation for the reaction is given below:

N2 + 3H2 —> 2NH3

Next, we shall determine the number of mole NH3 produced by reacting 6moles of N2. This is illustrated below:

From the balanced equation above,

1 mole of N2 reacted to produce 2 moles of NH3.

Therefore, 6 moles of N2 will react to produce = 6 x 2 = 12 moles of NH3.

Finally, we shall convert 12 moles of NH3 to grams. This is illustrated below:

Number of mole of NH3 = 12 moles.

Molar mass of NH3 = 14 + (3x1) = 17g/mol

Mass of NH3 =..?

Mass = mole x molar mass

Mass of NH3 = 12 x 17

Mass of NH3 = 204g.

Therefore, 204g of NH3 will be produced from the reaction.

Creatinine, �!�!�!�, is a by-product of muscle metabolism, and creatinine levels in the body are known to be a fairly reliable indicator of kidney function. The normal level of creatinine in the blood for adults is approximately 1.0mg per deciliter (dL) of blood. If the density of blood is 1.025g/mL, calculate the molality of a normal creatinine level in a 10.0mL blood sample. What is the osmotic pressure (in atm) of this solution at 25.0°C?

Answers

Answer:

Explanation:

molecular weight of creatinine = 131

1 mg of creatinine = 1 x 10⁻³ / 131 = 7.63 x 10⁻⁶ mole of creatinine.

volume of solution = .1 L

mass of blood solution = .1 x 1025

= 102.5 g

mass of solvent = 102.5 g approximately

= .1025 kg

molality = mole of solute / mass of solvent in kg

= 7.63 x 10⁻⁶ / .1025 kg

= 74.44 x 10⁻⁶ .

Osmotic pressure :---

π V / T = nR     π is  osmotic pressure , V is volume of solution in liter , T is absolute temperature , n is molality .

π x .1 / 298 =  74.44 x 10⁻⁶ x .082

π = 18.19 x 10⁻³ atm

Please help! BRAINLIEST to correct answer!!!!

Answers

Answer:

Exothermic Process

Explanation:

Other Questions
When two liquids have the same osmotic pressure they're said to beQuestion 6 options:hypotonic.hypertonic.isotonic.diffuse. what is the domaine of this function (100 POINTS):( You will be reported if you provide an inapplicable answer)use this function to answer the questions f(x) = 2x^2 5x + 3-Find The X intercepts of the graph-Is the Vertex Going To Be Minimum Or Maximum? (I may be able to figure this one out)-What is The Coordinates Of The Vertex? -What Would You Do To Graph f(x)? Please Explain because I want to understand it! mainly just need help with the first and then I may be able to take it from there. The number of cars sold at a dealership over several weeks is given below.14, 23, 31, 29, 33What is the standard deviation for this set of population data?Standard deviation: Sigma = StartRoot StartFraction (x 1 minus mu) squared + (x 2 minus mu) squared + ellipsis + (x N minus mu) squared Over N EndFraction EndRoot6.912.415.447.2 Lucas built a composite solid by joining 12 identical blocks, with dimensions 4 inches by 5 inches by 7 inches, into threeows of four as shown.7 in.5 in4 inWhat is the total surface area of the composite solid?O 521 square inches1,042 square inches1,072 square inchesO 1.992 square inches Ellos preferiran que ellaen las siguientes pginas. (trabajar)Otrabajatrabajandotrabajaratrabajaremos What word describes Sierra Madre Determine which consecutive integers do not have a real zero of f(x) = x^3 + 9x^2 + 8x 5 between them.A.) (8, 7)B.) (4, 5)C.) (0, 1)D.) (2, 1) Which number best represents the location of point A on the number line shown?A)-7.5B)7 3/10C)7 3/8D)7 3/7 Dual Nature of LightAssignmentActiveExplaining the Nature of LightWhy do scientists believe that light is made of streams ofparticles? Antonio is ready to move out of his parent's house and live on his own. He found a great apartment that has all utilities included. His job as an assistant plumber requires him to have a car, but his hours are flexible enough to give him time on the weekends to have fun with his friends. What is the best way Antonio's budget can be modified to help him save enough for the $200 down payment and make the $500 monthly rental payment? Monthly Budget Old Budget New Budget Income Wages $1500 $1500 Expenses Food Cell Phone Savings Entertainment Car Expenses . $250 $175 $200 $200 $300 . $____ $____ $____ $____ $____ Net Income $375 $____ a. Antonio could keep his budget the same and hope he gets a raise at work. b. Antonio could reduce his monthly entertainment expenses by $100 to help pay the monthly rent. He could take $200 out of savings once for the deposit. c. Antonio could live at his parents house for one more month and save his net income. After one month of living at home, he would have enough additional money for the deposit and one years rent at the apartment. d. Antonio could reduce his monthly entertainment expenses by $75 and his food expenses by $50 to pay the monthly rent. He could take $200 out of savings once for the deposit. You receive the following prescription: Jessie DeCato Age: 3 Weight: 22 lbs Acyclovir oral suspension 20mg/kg four times daily x 5 days a. How much acyclovir should be administered per dose? Hint: There are 2.2 lbs to 1 kg. A cosine function is a reflection of its parent function over the x-axis. The amplitude of the function is 11, the vertical shift is 9 units down, and the period of the function is 7pi/12. The graph of the function does not show a phase shift. What is the equation of the cosine function described?Fill in the blanks using values from this list: -20, -11, -9, -2, 2, 9, 11, 20, 7pi/12,12pi/7,7/24,24/7f(x)=___cos(_____x)______ Line segments AB and BC are tangents to Circle P. What is the value of x?a.117b.73c.107d.146 Which best describes a fraction? A fraction is the denominator divided by the numerator. A fraction is the numerator divided by the denominator.1.) A fraction is the numerator multiplied by the denominator.()) A fraction is the denominator multiplied by the numerator. Figure A is translated 3 units right and 2 units up. The translated figure is labeled figure B. Figure B is reflected over the x-axis. The reflected figure is labeled figure C. Which best explains why figure A is congruent to figure C? On a coordinate plane, triangle A has points (1, negative 2), (3, negative 2), (3, negative 5). Triangle B has points (4, 0), (6, 0), (6, negative 3). Triangle C has points (4, 0), (6, 0), (6, 3). HURRY CHOOSE ONEA Is congruent to B and B Is congruent to CA Is congruent to A, B Is congruent to B, C Is congruent to CEach triangle is a right triangle.Each triangle is an isosceles triangle. A blueberry bush was 13 inches tall. One year later, the bush was 25 inches tall.Which number sentence shows how many inches the bush grew in one year? can somebody just please help this the last question A recipe calls for 1/6 teaspoon of vanilla extract. If the recipe is doubled, then how much vanilla extract is needed? A package of books weighs 72 ounces. What is the weight of the package in pounds?