Answer:
I don't know what you mean about which changes occurred in this process but if its why the dough starts rising then its caused by the carbon dioxide in baking soda and yeast which is a fungus
Answer:
When baking,flour is mixed with water,the other ingredients and yeast to form a paste called a dough.what happens is that the zymase enzyme from the yeast acts on the sugars to form carbon dioxide and alcohol.the carbon dioxide begins to form bubbles in the dough causing it to rise..
I hope this helps
how to find the mechanical advantage
Answer:
[tex]{ \bf{mechanical \: adv = \frac{load}{effort} }}[/tex]
Một bóng đèn có hiệu điện thế định mức là 110V. Đặt vào hai đầu bóng đèn các hiệu điện thế sau đây, hỏi trường hợp nào dây tóc của đèn sẽ đứt?
Answer:
fhaiisjrbekxkrkebxnsiiwj4bnds
what is the kinetic energy of a 2,000-kg car moving at 20m/s
Answer:
400k
Explanation:
Formula for KE = [tex]\frac{1}{2} mv^{2}[/tex]
Plug in:
KE = [tex]\frac{1}{2} mv^{2}[/tex]
KE = [tex]\frac{1}{2}[/tex] × 2000 × 20^2
Solve:
1000 × 400 = 400,000 or 400k
Hope this helped.
Answer : 400000J OR 4×10^4J
Kinetic energy= 1/2mv^2
Here, m=2000kg; V=20m/s
1/2×2000×20×20=400,000J
A body having uniform velocity has zero acceleration? give reason
Answer:
A body having uniform velocity has zero acceleration because
there is not change in velocity.
explain why resistors connected in parallel are called current dividers
Explanation:
A parallel circuit is often called a current divider for its ability to proportion—or divide—the total current into fractional parts. Once again, it should be apparent that the current through each resistor is related to its resistance, given that the voltage across all resistors is the same
Which type of electromagnetic wave is deliberately used in some
circumstances to cause damage to living cells in the human body?
A. Infra-red
B. Gamma rays
C. Microwaves
D. Radio waves.
Gamma rays
used in radiotherapy
Explain why a person travelling in a bus falls forward when bus stops suddenly
Answer:
Cause of Inertia of Motion
Explanation:
It can be explained as follows...when the moving bus suddenly stops, the lower part of the body of the passenger contact with the bus suddenly comes to rest while the upper part of the body tends to retain its state of motion due to inertia. As a result, the passenger is thrown forward.
(9x10^2) + (1x10^2)
10x10^4
10x10^3
1x10^4
1x10^3
Answer:
10 x 10⁴
I hope it's helps you
Answer:
Yes
Explanation:
A simple machine has efficiency 90%. What does it mean? No machine has 109 efficiency,why?
Answer:
Efficiency of a machine is 90% this means that the total energy produced to the machine only 90% is useful and given as a output.
Machines are not 100% efficient because some of the work done by a machine is used to overcome friction
Object A has a mass of 5 kg and a velocity of 6 m/s to the east while Object 1 point B has a mass of 12 kg and velocity 0.6 m/s also to the east. What is the momentum of the system? (Let east be positive)
help plss I got family
Answer:
Momentum of system = 37.2 Kgm/s.
Explanation:
Given the following data;
Mass A = 5 kgVelocity A = 6 m/sMass B = 12 kgVelocity B = 0.6 m/sTo find the momentum of the system;
Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
Momentum = mass * velocity
For object A;
Momentum A = 5 * 6
Momentum A = 30 Kgm/s
For object B;
Momentum B = 12 * 0.6
Momentum B = 7.2 Kgm/s
Next, we would determine the momentum of this system using the formula;
Momentum of system = Momentum A + Momentum B
Substituting the values into the formula, we have;
Momentum of system = 30 + 7.2
Momentum of system = 37.2 Kgm/s.
The T-chart compares the average temperature and humidity of two different environments. Which of the following correctly labels the environments?
a t-chart with one column labeled A listing: High humidity: 70%, Temperature Range: 2 degrees Celsius (35 degrees Fahrenheit) in the winter to 24 degrees Celsius (75 degrees Fahrenheit); and another column labeled B listing: Low humidity (13-15%), Temperature Range: -18 degrees Celsius (-1 degrees Fahrenheit) to 49 degrees Celsius (120 degrees Fahrenheit)
A is a desert, and B is a tundra.
A is a grassland, and B is a desert.
A is a tundra, and B is a rainforest.
A is a tundra, and B is a swamp.
Answer:
A turndra B rainforest
Explanation:
why Fossil fuel has been used more in the existing world ?
in a cathode-ray tube, particles are fired at the screen. What are these particles
Most solar hot water systems are fitted with gas or electric "boosters" that can also heat the water.
Describe why you think these are necessary.
DUE IN 2 HOURS PLEASE HELP!!
A 210 Ohm resistor uses 9.28 W of power. How much current flows through the resistor? (unit=A)
Answer:
.21
Explanation:
i see everyone got it wrong so ill give you the answer, good luck :)
Group elements number 11 to 20 as either metallic, non metallic or metalloid.
Answer:
The elements are grouped into the different substances by color. As you can see, Lithium, Beryllium, Sodium, Magnesium, Aluminum, Potassium, and Calcium are metals out of the first 20 elements.
Hydrogen, Helium, Carbon, Nitrogen, Oxygen, Fluorine, Neon, Phosphorus, Sulfur, Chlorine, and Argon, are non-metals within the first 20 elements.
Boron and Silicon count as Metalloids in the Periodic Table (properties of both metals and non-metals)
reference- socatric q and a
Explanation:
Answer:
(11-13) - Metals
(14) - Metalloid
(15-18) - Non- metals
(19-20) - Metals
Explanation:
The elements from 11 to 13 are metals. They are Sodium(Na), Magnesium(Mg) and Aluminum(Al) respectively.
The element 14 is a metalloid. It’s Silicon(Si).
The elements from 15 to 18 are non metals. The 18th element is a noble gas known as Argon(Ar).
The elements from 15 to 17 are Phosphorus(P), Sulphur(S) and Chlorine(Cl).
The elements from 19 to 20 are metals. They are Potassium(K) and Calcium(Ca).
2. ¿Puede haber trabajo en un sistema si no hay movimiento
a. Sí, si hay una fuerza siempre.
b. Sí, ya que el movimiento es sólo relativo.
c. No, ya que un sistema que no se mueve no tiene energía.
d. No, porque la ecuación de trabajo lo define.
Answer:
d. No, porque la ecuación de trabajo lo define.
Explanation:
En Física, el trabajo realizado se puede definir como la cantidad de energía transferida cuando un objeto o cuerpo se mueve a lo largo de una distancia debido a la acción de una fuerza externa.
Matemáticamente, el trabajo realizado viene dado por la fórmula;
[tex] W = F * d [/tex]
Dónde;
W es el trabajo realizado.F representa la fuerza que actúa sobre un cuerpo. d representa la distancia recorrida por el cuerpo.Por lo tanto, podemos deducir de la definición de trabajo y su fórmula que el trabajo se realiza cuando un objeto (cuerpo) se mueve una distancia o experimenta cualquier forma de desplazamiento mientras transfiere energía.
what is the difference between MKS system and SI system of measurement
Answer:
The MKS (metre, kilogram, second) system of units is the fundamental core of the SI (Systeme Internationale, or International System) of measurement. As various fields grow new forms of measurements based on MKS, terms or exact definitions may vary in different scientific or engineering disciplines. These inconsistencies are sorted out by the international committee that defines the SI system of units and keeps it up to date.
So the MKS is the static core, and the SI is the evolving, growing system of metric measurement.
Metres and kilograms were introduced after the French Revolution around 1790. Seconds were added by the 1830s, building the MKS system. More units came later. By 1948, a need was seen to develop a clear and consistent set of terms for measurement, and this led to 12 years of work, ending with the release of the first version of the SI in 1960.
The SI now has seven base units of measure. It begins with the original three metre, kilogram, and second, and adds the ampere for electricity, candela for light, kelvin for temperature, and mole for amount (number of atoms or molecules) of a substance.
The SI defines how each fundamental unit can be measured or obtained experimentally. These definitions have changed over time. For example, the metre was originally a measure related to the circumference of the Earth, then a set number of waves of a particular wavelength, and now a distance traveled by light in a vacuum in a certain period of time.
The SI also defines modifying terms such as milli-, centi-, and kilo- that are a specific number of each unit.
The SI includes many other derived units, as well.
By standardizing international use of measurements across different fields of science and engineering, the SI reduces confusion that would slow scientific progress and error that can produce engineering catastrophe such as the loss of the Mars Climate Orbiter in 1999 due to a table that should have been in metric units (kilograms and meters) being provided in United States customary units (pounds and inches).*
The Mars Climate Orbiter and its mission were lost due to a failure to use SI units consistently.
Hope this help you!:)
Write down the conservation of momentum?
balloon moves backward when air rushes out of it why
Answer:
Because the air can move out of the balloon at such a speed, it propells the balloon forward.
Explanation:
SmolFox no longer exists
~Chad~
The action of the balloon pushes against the balloon moving it in the backward direction
What is newton's third law of motion ?Newton's third law of motion states that every action have a equal and opposite reaction . If object A exert force on object B , then object B will also exert an equal and opposite force on object A . Forces result from interaction of two bodies .
As we know according to Newton's third law of motion , when the air rushes out and pushes against the air which pushes the balloon to move in opposite direction , the action of the balloon pushes against the balloon moving it in the backward direction
learn more about Newton's third law of motion
https://brainly.com/question/974124?referrer=searchResults
#SPJ3
.............................
A liquid has a density of 2 g/mL, the volume is measured at 20 mL, what is the mass of the liquid?
Answer: 40 grams, if it is two grams per mL and you have 20 mL, you multiply 2 grams/mL and you get the answer
State one effect of increase in heat for a temperature range of 50°C to 100°C
on Plastic
Answer:
why is fraction called a necessary evil
The heat for a temperature in plastic increases at the range of 50°C to 100°C then the plastic decreases its stiffness or flexural modulus.
It is given that the temperature is increased from 50°C to 100°C that means temperature is increasing.
It is required to state the effect of increase in heat on plastic.
What will be the effect of increase in heat for a temperature range of 50°C to 100°C on Plastic?The plastic starts to lose its stiffness or we say that it converts into a softened material as long as we increase the temperature of the material.
So if we increase the temperature too much or exceed above the limit of temperature range then it will distort.
Also there are many qualities that can be affected by increasing the temperature like mechanical property, material fatigue or chemical phenomenon.
Therefore, the heat for a temperature range of 50°C to 100°C
Plastic increases then the plastic decreases its stiffness or flexural modulus.
Learn more about the range of temperature here:
https://brainly.com/question/11316625
#SPJ5
A man sees a deer in the road and slams on his brakes. If he is traveling at 45.2 m/s and comes to a stop in 2.74 s, what is his acceleration? O -6:02 m/s2 -0.0606 m/s2 -47.9 m/s2 0 -16.5 m/s2
Answer:
16.50 m/s²
Explanation:
initial velocity(u)=45.2 m/s
final velocity(v)= 0 (it stops)
time taken(t)= 2.74 s
now,we have
acceleration(a)= (v-u)/t
= (0-45.2 m/s)/2.74s
= -45.2 m/s / 2.74s
= -16.50 m/s²
Answer:
[tex]\boxed {\boxed {\sf -16.5 \ m/s^2}}[/tex]
Explanation:
We are asked to find the acceleration of a man driving. Acceleration is the change in velocity over the change in time. Acceleration is calculated with the following formula.
[tex]a= \frac{v_f- v_i}{t}[/tex]
The driver's initial velocity is 45.2 meters per second. His final velocity is 0 meters per second because he came to a stop. He stopped in 2.74 seconds.
[tex]\bullet \ v_f= 0 \ m/s \\\bullet \ v_i= 45.2 \ m/s \\\bullet \ t= 2.74 \ s[/tex]
Substitute these values into the formula.
[tex]a= \frac{0 \ m/s - 45.2 \ m/s }{ 2.74 \ s}[/tex]
Solve the numerator by subtracting.
[tex]a= \frac{- 45.2 \ m/s }{ 2.74 \ s}[/tex]
[tex]a= -16.49635036 \ m/s^2[/tex]
The original measurements of velocity and time have 3 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 9 in the hundredth place tells us to round the 4 in the tenths place up to a 5.
[tex]a \approx -16.5 \ m/s^2[/tex]
The acceleration is approximately -16.5 meters per second squared. The acceleration is negative because the man slowed down and came to a stop.
(2) Why do spring balance shows wrong reading after they had been uses for a long time?
This is because of continuous usage, the wire loses its elasticity and dose not regain it original dimension
Answer:
When a spring balance has been used for a long time, the spring in the balance fatigued and there is loss of strength of the spring. In such a case, the extension in the spring is more for a given load and hence the balance gives wrong readings.
is placing a compass near a wire with live electrical current biology, chemistry, or physics?
The process of PLACING a compass wherever you want it involves Biology. Biology deals with everything that has to happen for your brain to send instructions to your muscles, your muscles to operate your arm and your hand, and your hand to move the compass to where you want it, while your eyes keep track of what's happening and send course-corrections through your brain.
Once you get the compass there and see it start doing strange things, those EFFECTS are explained by laws of nature that are covered in Physics.
Placing a compass near a wire with live electrical current involves physics. Because, the deflection in magnetic field by the current from the electrical wire is dealt with physics.
What is magnetic field ?A magnetic field is generated by the field lines originating from a magnet or an electrical coil. The moving current is always associated with a magnetic field.
A compass acts as a tiny magnet and it deflects to the north in the absence of an electrical field. If an electric field is brought in contact with the compass the needle will deflect into the direction of the magnetic field from the wire.
The strength of a magnetic field, associated electric field, magnetic flux etc. are more focused in the branches of physics. The magnetic properties of a substance is a physical property.
Find more on magnetic properties:
https://brainly.com/question/4242549
#SPJ2
3. Take sugar, oil, corn syrup, a glass and water. Pour the water in the glass and then add each of the above the substances one after the other. Observe and note your observations. And give reason for your observation.
Here are the observations
Sugar:-
Sugar is soluble in water so It will dissolve in water .Corn syrup:-
Corn syrup is also basically a sugar.It will dissolve in water too .If we shake the mixture in glass then corn syrup will be dissolved.Oil:-
Oil is not soluble in waterHence it won't dissolve in water.It will float over water and make two layersWhich quantity can be measured directly using a micrometer screw gauge? A the area of a sheet of paper B the mass of a sheet of paper с the thickness of a sheet of paper D the volume of a sheet of paper
Answer: C) the thickness of a sheet of paper.
Explanation:
A micrometer screw gauge is a tool that measures distances (in order of millimeters), from this, we can see that the correct option is C: the thickness of a sheet of paper.
Now let's expand on this.
Knowing that the micrometer only can measure distances, we need to analyze which of the options is only a distance.
Notice that while area and volume have similar units, are really different things.
So analyzing the options we have:
A) "the area of a sheet of paper"
To find the area we need two measures (length and width) and then multiply this, but with a micrometer, we never measure the length of a sheet of paper (the maximum measure that you can get in a micrometer is of a few centimeters).
B) "the mass of a sheet of paper"
We can't measure mass with a micrometer.
C) " the thickness of a sheet of paper"
The thickness of a sheet of paper is of the order of 1mm, so we can easily measure this with a micrometer screw gauge.
D) " the volume of a sheet of paper"
We have a similar problem as the one seen in A.
Then the correct option is C.
If you want to learn more, you can read:
https://brainly.com/question/16017208
balance the following equations: CUCO3+H2SO4- CUSO4+H2O+CO2
Answer:
It is already balanced
Explanation:
It is already balanced
can someone help me asap please
Answer:
Resultant force is 20 N
Explanation:
Resolving vertically:
[tex]{ \sf{F_{y} = (8 \cos 30 \degree) + (12 \cos 30 \degree) }} \\ { \sf{ \sum F_{y} = 17.3 \: newtons }}[/tex]
Resolving horizontally:
[tex]{ \sf{F_{x} = (8 \sin 30 \degree) + (12 \sin 30 \degree) }} \\ { \sf{ \sum F _{x} = 10 \: newtons}}[/tex]
Resultant force:
[tex]{ \boxed{ \bf{F = \sqrt{ {F _{x} }^{2} + {F _{y} }^{2} } }}} \\ { \sf{F = \sqrt{ {17.3}^{2} + {10}^{2} } }} \\ { \sf{F = \sqrt{399.29} }} \\ F = 19.98 \approx20 \: newtons[/tex]
