Answer:
Following are the response to the given question:
Explanation:
Many previous studies are published about the methods, technologies for successful system implementation of distinct SDLC s development cycles. Not only technical activities but also design, process improvement, user experience, social democracy, user effect, and proper security procedures. The SDLC is an element of the process and installs programs. These complex life-cycles of knowledge management are addressed by books like David Identify factors that contribute & Guy Fitzgerald's Information System Developments and Alan Daniels as well as Don Yeats's Fundamental Systems Design.
This paper offers a comprehensive background, description, stages, advantages, and risks, along with methods supporting the life cycle of system development.
We first have to define the systems to understand the notion of a life cycle of the system development. A system is an element of IT - hardware, programming, or a mix of both. Each program is designed from initial planning to disposal via a development cycle. To avoid costly errors and also to speed up the development, some approaches provide the necessary framework to guide the challenging and complex operations, all of which aim to put in action or software-based systems through stages.
A lifespan is analogous to a project life cycle. SDLC is now in reality regarded in many situations as a staged plan model that sets the corporate, personnel, political, and budgetary limits of the large project. The term "Project" implies that the cycles began and finished and the methodologies inherent inside the strategy for just a systems development life cycle give clear, different stages of the work inside the strategy, development, testing, implementation, and maintenance parts.
SDLC membership also includes c-suite management, however, the multilayered process is managed via construction managers, technology, systems and system engineers, customers, and the design team. Each program is individually complex in planning and execution, and project leaders often use numerous SDLC approaches inside a company.
A company's beginning Work in Process inventory consisted of units that were 90 % complete with respect to direct labor A total of were finished during the period and remaining in Work in Process inventory were 40 % complete with respect to direct labor at the end of the period . Using the weighted average method the equivalent units of production with regard to direct labor were :
Answer: 109,800 units
Explanation:
Equivalent Units of Production with respect to Direct Labor can be calculated as:
= Units completed during the period + Equivalent ending Work in Process Inventory (1)
Equivalent ending Work in Process Inventory = 32,000 ending units * 40% completion with respect to direct labor
= 12,800 units
EUP direct labor = 97,000 + 12,800 (1)
= 109,800 units
Assume that you manage a risky portfolio with an expected rate of return of 15% and a standard deviation of 31%. The T-bill rate is 5%.
Stock A 26%
Stock B 33%
Stock C 41%
A client prefers to invest in your portfolio a proportion (y) that maximizes the expected return on the overall portfolio subject to the constraint that the overall portfolio's standard deviation will not exceed 20%.
a. What is the investment proportion, y?
b. What is the expected rate of return on the overall portfolio?
Answer:
a. 64.52%
b. 11.45 percent
Explanation:
we solve for the standard deviation of the full portfolio. the standard deviation will not be more than 20 percent.
this is given as
y * 31 percent
20% = y * 0.31
0.20 = 0.31y
y = 0.20/0.31
y = 0.64516
= 64.52 percent
b. The expected rate of return
= (1- 64.52%)*0.05+0.6452*15percent
= 0.3548*0.05+0.09678
= 0.11452
= 11.45 percent
this is the expected rate of return on the overall portfolio
GHI Corporation, a California corporation, has a six-person board. At a regular board meeting, only two directors attend. No notice was sent to any of the directors. The two attending call directors Alice and Bob and put them on a conference call. The four talk about the corporation buying Blackacre and then all agree to a resolution for GHI to buy Blackacre from Third Party. The Bylaws of GHI state that an action of the board requires the consent of a majority of the directors present at a meeting, and that a quorum is a majority of the authorized directors.
Select one:
a. the purchase is authorized because a quorum was present and a majority of those present approved the action.
b. the purchase is not authorized, since all real estate transactions require shareholder approval
c. the purchase is not authorized because prior written notice must be sent to each director
d. the purchase is not authorized because a quorum was not present at the board meeting
e. Two of the above are correct.
Answer:
a. the purchase is authorized because a quorum was present and a majority of those present approved the action.
Explanation:
going by the bye laws of GHI state, board action requires that majority of the members of the board are present and give consent in the meeting. here in this question, we have a 6 member board. Although only two of the board members are physically present, through conference call Alice and Bob increased the number to 2 when they joined in. Therefore the number of board members at this meeting is 4, then the requirement has been met. So since this 4 agreed to the purchase, it is authorized and valid since a quorum was present and a majority of them agreed to the action. option a is correct
The correct statement is a. the purchase is authorized because a quorum was present and, a majority of those present approved the action.
The quorum required by the Bylaws of GHI is for a majority of directors to be present, and in this case, four directors were present (two physically and two by conference call).
The Bylaws of GHI specify that every action of the directors should be supported by a majority present at a meeting. We can conclude that the purchase is authorized by the majority (100%).
Thus, the purchase of Blackacre by GHI is authorized.
Learn more about board of directors, quorum, and majority votes here: https://brainly.com/question/7985365
Summer 20 Company has asked you to calculate the TOTAL cost per EUP (Equivalent Units of Production) using the weighted average method based on the following. (You must show and label your work for credit.)
Direct Materials Cost $65,000
Conversion Cost $90,000
EUP for Direct Materials 1,000
EUP for Conversion Cost 900
Answer:
$165
Explanation:
Cost per equivalent unit under weighted average method
Direct materials Conversion cost Total
Cost $65,000 $90,000 $155,000
÷ EUP 1,000 900
Cost per equivalent unit $65 $100 $165
Nếu GDP = $1000, tiêu dùng = $600, thuế = $100, và chi tiêu chính phủ = $200, thì:
A. Tiết kiệm = $0, đầu tư =$0
B. Tiết kiệm = $300, đầu tư =$300
C. Tiết kiệm = $200, đầu tư =$200
D. Tiết kiệm = $200, đầu tư =$100
Answer:
Saving = $200
Investment = $100
Explanation:
Given;
Gross Domestic Production = $1000
Consumption = $600
Taxes = $100
Government spending = $200
Find:
Saving and investment
Computation:
Saving = Gross Domestic Production - Consumption - Government spending
Saving = 1,000 - 600 - 200
Saving = $200
Investment = Saving - Taxes
Investment = 200 - 100
Investment = $100
Trong kinh tế học, cụm từ "phân phối" đề cập đến ??
Câu trả lời:
Vui lòng kiểm tra giải thích
Giải trình:
Phân phối trong kinh tế học đề cập đến việc chia sẻ và giải ngân doanh thu, thu nhập hoặc đầu ra thương mại giữa các yếu tố sản xuất bao gồm đất đai, lao động, vốn và các bên liên quan có liên quan. Tương tự như vậy, hàng hóa được sản xuất ra sẽ phải được chia sẻ một cách chiến lược trong thị trường khác để đảm bảo rằng các địa điểm hoặc khu vực có nhu cầu hoặc nhu cầu cao được xác định và hàng hóa và dịch vụ được chia sẻ tương ứng. Phân phối là điều cần thiết trong kinh tế học vì nó nhằm mục đích đảm bảo phân bổ nguồn lực và phân bổ đầu ra một cách công bằng và hiệu quả, dẫn đến sự tham gia thị trường hiệu quả nhất.
On December 31, the trial balance indicates that the supplies account has a balance, prior to the adjusting entry, of $269. A physical count of the supplies inventory shows that $102 of supplies remain. Analyze this adjustment for supplies using T accounts, and then formally enter this adjustment in the general journal.
Answer:
Balance Sheet
Supplies
Beg. Bal. $269 | Adj. $167
Bal. $102
Income Statement
Supplies Expense
Adj. $167 |
Date Account Title Debit Credit
Dec 31 Supplies Expense $167
Supplies $167
(To record Supplies used)
1.how can you categorize the buyers who are not price sensitive ?
Maplewood Co. uses process costing to account for the production of canned energy drinks. Direct materials are added at the beginning of the process and conversion costs are incurred uniformly throughout the process. Cost per equivalent unit has been calculated to be $4.00 for conversion costs and $3.00 for materials. 2,000 units were in beginning inventory (100% complete for materials, 80% for conversion). 8,000 units were started and completed during the period. Ending inventory still in process was 4,000 units (100% complete for materials, 40% forconversion). The value of ending inventory using the FIFO method would be:______.
A. $18,400.00B. $23,133.20C. $31,933.20D. $65,000.00
Answer:
A. $18,400.00
Explanation:
The computation of the value of ending inventory using the FIFO method would be shown below:
Value of ending inventory = Materials + Conversion costs
where,
Materials = (4000 units × 100%) × $3 per unit
= $12,000
And,
Conversion costs = (4000 units × 40%) × $4 per unit
= $6,400
So, the ending inventory is
= $12,000 + $6,400
= $18,400
Bakers are much ___________ likely to supply pastries to the market if property rights are not enforced. In the presence of market failures, public policy can improve economic efficiency. Classify the source of market failure in each case listed.
a. A manufacturing plant dumps chemical waste into a nearby river, poisoning the water supply for a small town downstream.
b. A single public utilities company is responsible for supplying electricity for an entire state. As a result, the utilities company can set the price of electricity.
Answer: more; externality; market power.
Explanation:
Bakers are much (more) likely to supply pastries to the market if property rights are not enforced.
a. A manufacturing plant dumps chemical waste into a nearby river, poisoning the water supply for a small town downstream. - Externality
Externality, refers to the benefit s or costs that someone else incurs based on the economic decision of another person. In this case, this is a negative externality as the small town bears the cost of the production activities of the company.
b. A single public utilities company is responsible for supplying electricity for an entire state. As a result, the utilities company can set the price of electricity - Market power
Market power is when a firm is able to dictate the price and can then raise the price. This brings about the reduction in output as well. Since the single public utilities company is responsible for supplying electricity for an entire state, the company is enjoying monopoly power or market power.
A company purchases land and a building for $300,000. The appraisal attributes a fair market value (FMV) to the land of $180,000 and to the building of $220,000. As a result, the building’s cost will be booked at:____________
The nominal interest rate in the U.S. is 5% and the nominal interest rate in Canada is 3%. The spot value of the U.S. dollar is 1 ($/Canadian dollar) and the forward rate is 1.2 ($/Canadian dollar). Which of the following is not true?A. The interest parity condition does not hold.
B. The dollar is likely to appreciate in spot markets.
C. Money will flow into the Canada.
D. The dollar is trading at a forward discount.
Answer: B. The dollar is likely to appreciate in spot markets.
Explanation:
First find the forward rate using the forward rate formula:
Forward rate = Spot rate * (1 + Interest rate of Canada) / (1 + Interest rate of US)
= 1 * ( 1 + 3%) / (1 + 5%)
= 0.980952
= 0.98
The forward rate according to the formula is less than the forward rate that is trading.
This means that the U.S. dollar is trading at a forward discount and when this happens, the dollar will not appreciate in the spot markets because it is scheduled to be discounted in the forward market.
Prepare journal entries for the following credit card sales transactions.
1. Sold $20,000 of merchandise, which cost $15,000, on MasterCard credit cards. Master Card charges a 5% fee.
2. Sold $5,000 of merchandise, which cost $3,000, on an assortment of bank credit cards. These cards charge a 4% fee.
Answer and Explanation:
The journal entries are given below:
1. Cash A/c Dr $19,000
Credit card expense A/c Dr $1,000 ($20,000 × 5%)
To Sales A/c $20,000
(To record the received cash )
Cost of goods sold A/c Dr $15,000
To Merchandise inventory A/c $15,000
(To record the inventory is sold at cost)
2. Accounts receivable A/c Dr $4,800
Credit card expense A/c Dr $200 ($5,000 × 4%)
To Sales A/c $5,000
(To record the merchandise is sold on credit)
Cost of goods sold A/c Dr $3,000
To Merchandise inventory A/c $3,000
(To record the inventory is sold at cost)
Cash A/c Dr $4,800
To Accounts receivable $4,800
(to record the cash is received)
A profitable company making earthmoving equipment is considering an investment of $150,000 on equipment that will have a 5 year useful life and a $50,000 salvage value. Use a spreadsheet function to compute the MACRS depreciation schedule. Show the depreciation taken (=sum ()) as well as the PW of the depreciation charges discounted at the MARR%. If money is worth 10%m which one of the following three methods of depreciation would be preferable? (a) Straight line method), (b) double declining balance method, (c) MACRS method.
Answer:
Earthmoving Equipment Company
The preferable method of depreciation based on the Present Worth is:
(a) Straight line method
Explanation:
a) Data and Calculations:
Cost of equipment = $150,000
Estimated useful life = 5 years
Salvage value = $50,000
Depreciable amount = $100,000 ($150,000 - $50,000)
Annual Depreciation:
Straight-line method = $20,000 ($100,000/5)
Double-declining-balance method rate = 40% (100%/5 * 2)
Depreciation Schedules:
a) Straight line method
Year Cost Depreciation Accumulated Net Book Value
Expense Depreciation
Year 1 $150,000 $20,000 $20,000 $130,000
Year 2 $150,000 $20,000 $40,000 $110,000
Year 3 $150,000 $20,000 $60,000 $90,000
Year 4 $150,000 $20,000 $80,000 $70,000
Year 5 $150,000 $20,000 $100,000 $50,000
b) double declining balance method
Year Cost Depreciation Accumulated Net Book Value
Expense Depreciation
Year 1 $150,000 $60,000 $60,000 $90,000
Year 2 $150,000 36,000 96,000 54,000
Year 3 $150,000 4,000 100,000 50,000
Year 4 $150,000
Year 5 $150,000
c) MACRS method
Year Cost Depreciation Accumulated Net Book Value
Expense Depreciation
Year 1 $150,000 $30,000 $30,000 $120,000
Year 2 $150,000 48,000 78,000 72,000
Year 3 $150,000 28,800 106,800 43,200
Year 4 $150,000 17,280 124,080 25,920
Year 5 $150,000 17,280 141,360 8,640
Year 6 $150,000 8,640 150,000 0
Discount rate (MARR) = 10%
PW of Straight-line Depreciation Charges:
PV annual factor = 3.791
PW = $75,820 ($20,000 * 3.791)
PW of Double-declining-balance:
Year 1 = $54,540 ($60,000 * .909)
Year 2 = $29,736 ($36,000 * .826)
Year 3 = $3,004 ($4,000 * .751)
PW = $87,280
PW of MACRS:
Year 1 = $27,200 ($30,000 * .909)
Year 2 = $39,648 ($48,000 * .826)
Year 3 = $21,629 ($28,800 * .751)
Year 4 = $11,802 ($17,280 * .683)
Year 5 = $10,731 ($17,280 * .621)
Year 6 = $4,873 ($8,640 * .564)
PW = $115,883
10. Crowding out effect Suppose economists observe that an increase in government spending of $13 billion raises the total demand for goods and services by $52 billion. If these economists ignore the possibility of crowding out, they would estimate the marginal propensity to consume (MPC) to be . Now suppose the economists allow for crowding out. Their new estimate of the MPC would be than their initial one.
Answer:
Explanation:
Effect of crowding out:
The crowding out phenomena describes the economic phenomena in which an increase in government public spending leads to reduced or perhaps may eliminate of private investment.
Multiplier:
The multiplier represents the ratio of income to investment change.
Given that:
$13 billion increase in government spending will lead to a $52 billion
The rise in demand for goods & service will be the value of multiplier which is
= 52/13
= 4
To determine the multiplier using the formula:
Multiplier = 1 /( 1- MPC)
4 = 1/(1 - MPC)
4 (1 - MPC) = 1
(1- MPC) = 1/4
-MPC = 0.25 - 1
MPC = 0.75
Marginal propensity to consume = 0.75
The principal-agent problem arises when ________.
a. the owners of the firm also manage the firm
b. managers serve on a firm's board of directors
c. a firm is organized as a sole proprietorship
d. the owners of the firm are not the people managing the firm
Answer:
a. the owners of the firm also manage the firm
Explanation:
In domain of supply chain management and economics principal–agent problem can be regarded as one that occur when single person or an entity stand in the position of making decisions or in position of taking actions on behalf of another person/ entity Instance of this is real-life example where the way that companies are been owned and been operated. The owners of the company i.e "principal" of the company will be the one to elect a board of directors.
It should be noted that the principal-agent problem arises when the owners of the firm also manage the firm
Ryan bought a stock three years ago for $6 a share. Today, June 22, the stock is selling for $72 a share. Ryan is afraid that the price will fall and does not want to lose his profits so he places a stop-loss order to sell at $70. The stock sells between $71 and $75 throughout the remainder of the day on June 22. On the morning of June 23, the stock opens at $9 a share based on rumors of a possible bankruptcy due to inappropriate accounting procedures. Which one of the following statements is true concerning this situation?
a. Ryan was able to sell his stock for $70 a share thereby protecting his profits.
b. Ryan's stock was sold for $9 a share causing him to lose most of his profits.
c. Ryan still owns his shares of stock since his order was never executed at the $70 price.
d. Ryan received a call from the specialist asking him what he wanted to do about his order.
Answer:
B) Ryan's stock was sold for $9 a share causing him to lose most of his profits.
Explanation:
Stop loss order means the limit the loss to the extent investor has opted. Since Ryan placed a stop loss order at $70, so, when the price of the stock starts at $9, the stock would be sold at $9 because it is the next available price to what he placed a stop loss order.
So, the Answer is Ryan stock is sold for $9 a share causing him to lose most of his profits.
A stock has a market price of $25 and a standard deviation of returns of 24 percent. The $25 call option matures in 4 months and the risk-free rate is 2.89 percent. N(d1) is .555198 and N(d2) is .500096. What is the value of the call option per share of stock
Answer:
$334.38
Explanation:
Use the following formula to calculate the value of call option
Value of call option = ( N ( [tex]d_{1}[/tex] ) S ) - N ( [tex]d_{2}[/tex] ) K [tex]e^{rt}[/tex]
Where
S = $25
N(d1) = 0.555198
N(d2) = 0.500096
K = 25
r = 2.89%
t = 4/12 = 0.3333
Placing values in the formula
Value of call option = ((0.555198 x $25 ) x $25) - ( 0.500096 x $25 ) x 1.00967891
Value of call option = $346.99875 - $12.62340
Value of call option = $334.37535
Value of call option = $334.38
The Real Option Inc. is considering a new project. It believes that each year it would be able to sell 15 units at a $300,000 per-unit after-tax profit (i.e., per-unit operating cash flow) for the next five years. A $14.8 million initial investment will be required at the beginning of the project. The appropriate discount rate is 16 percent.
Required:
Calculate the base-case NPV of this project.
Answer:
NPV = $10.708 million
Explanation:
The base case NPV is that calculated by discounting the after-tax cash flow by the cost of equity based on asset beta. The base-case NPV does not consider the financing effect of the any particular finance source used to fund the project.
NPV = PV of cash inflow - Initial outlay
After-tax cash flow = 300,000×15= 4.5 million
PV of cash inflow = cash inflow × A × (1- (1+r)^(-n)/r
4.5 ×( 1- (1.16^-5)/0.16= 25.508 million
NPV = PV of cash inflow - Initial outlay
NPV = 25.508 million - 14.8 million
NPV = $10.708 million
Which is an example of regulation in the automobile industry?
Answer:
Introduction of fuel-efficiency standard for cars
Answer:
the creation of fuel-efficiency standards for cars
Explanation:
the creation of fuel-efficiency standards for cars
the installation of satellite radio systems in some cars
the usage of multiple-year warranties to cover repairs
the production of hybrid models that conserve gasoline
What are the purchase goods for cash Rs. 12,000 and for credit Rs. 8,000 (journal entries)?
Explanation:
Journal entries
Books of (----- LTD)
Particular Amount Amount
Purchase A/c Debit 20,000
Cash A/c Credit 12,000
Creditor A/c Credit 8,000
(Being goods purchase on cash and credit)
Garson, Inc. produces three products... Garson, Inc. produces three products. Data concerning the selling prices and unit costs of the three products appear below:
Product
F G H
Selling price $100 $ 80 $110
Variable costs $60 $50 $65
Fixed costs $10 $5 $7
Milling machine time (minutes) 10 6 5
Fixed costs are applied to the products on the basis of direct labor hours. Demand for the three products exceeds the company's productive capacity. The milling machine is the constraint, with only 2,800 minutes of milling machine time available this week.
Required:
a. Given the milling machine constraint, which product should be emphasized?
b. Assuming that there is still unfilled demand for the product that the company should emphasize in part (a) above, up to how much should the company be willing to pay for an additional hour of milling machine time?
Answer and Explanation:
The computation is shown below:
a.
Particulars F G H
Selling price (a) $100 $80 $110
Variable costs (b) -$60 -$50 -$65
Contribution Margin $40 $30 $45
Milling machine time
(minutes) 10 6 5
Contribution Margin
per minute $4 $5 $9
based on the above calculation, the product H should be emphasized as it has the highest contribution margin per minute
b. The price the company should pay is
= $9 × 60 minutes per hour
= $540
Lin Corporation has a single product whose selling price is $134 per unit and whose variable expense is $67 per unit. The company’s monthly fixed expense is $31,750. Required: 1. Calculate the unit sales needed to attain a target profit of $8,450. (Do not round intermediate calculations.) 2. Calculate the dollar sales needed to attain a target profit of $9,700.
Answer:
Results are below.
Explanation:
Giving the following information:
Fixed cost= $31,750
Unitary contribution margin= 134 - 67= $67
To calculate the number of units to be sold, we need to use the following formula:
Break-even point in units= (fixed costs + desired profit) / contribution margin per unit
Desired profit= $8,450
Break-even point in units= (31,750 + 8,450) / 67
Break-even point in units= 600
Now, the desired profit is $9,700; we need to use the following formula:
Break-even point (dollars)= (fixed costs + desired profit) / contribution margin ratio
Break-even point (dollars)= (31,750 + 9,700) / (67/134)
Break-even point (dollars)= 41,450 / 0.5
Break-even point (dollars)= $82,900
A service provided by a business to the final user is known as:
consideration.
investments.
implied warranty.
economic services.
capital goods.
Answer:
economic services.
Explanation:
An economy is a function of how money, means of production and resources (raw materials) are carefully used to facilitate the demands and supply of goods and services to meet the unending needs or requirements of the consumers.
Hence, a region's or country's economy is largely dependent on how resources are being allocated and utilized, how many goods and services are to be produced, what should be produced, for whom they are to be produced for and how much money are to be spent by the consumers to acquire these goods and services.
Basically, there are four (4) main types of economy and these are;
I. Mixed economy.
II. Free market economy.
III. Traditional economy.
IV. Command economy.
A service provided by a business to the final user is known as economic services.
Basically, economic services are considered to be intangible, inconsistent and perishable in nature. Thus, some examples of economic services are banking, hospitality, transportation, telecommunication, marketing, legal, rentals, insurance, security, public relations, etc.
Juanita worked hard all year so that she could go to nursing school the following year. She put her savings into a mutual fund that paid a nominal interest rate of 4 percent a year. The CPI was 252 at the beginning of the year and 257 at the end of the year. What was the real interest rate that Juanita earned?
Answer:
1.98%
Explanation:
Inflation rate = (CPI at the end of the year / CPI at the beginning of the year) - 1
(257 / 252) - 1 = 0.01984 = 1.984%
(1 + nominal interest rate) = (1 + inflation rate) (1 + real interest rate)
1.04 = 1.01984 x (1 + real interest rate)
(1 + real interest rate) = (1.04 / 1.01984) - 1 = 1.98%
Kelley Company reports $960,000 of net income and declares $120,000 of cash dividends on its preferred stock for the year. At year-end, the company had 400,000 weighted-average shares of common stock. 1. What amount of net income is available to common stockholders?
Answer:
$840,000
Explanation:
Amount that is attributable to common stockholders for dividends is always after deducting preferred stock.
The amount of net income is available to common stockholders is $840,000
Link Co. purchased machinery that cost $3,000,000 on January 4, 2019. The entire cost was recorded as an expense. The machinery has a nine-year life and a $200,000 residual value. The error was discovered on December 20, 2021. Before the correction was made, and before the books were closed on December 31, 2018, retained earnings was understated by:__________
a. $3,000,000.
b. $2,066,667.
c. $2,377,778
d. $2,333,333.
Answer:
See below
Explanation:
The gain or loss from retirement of debt is reported under cash flows from operating activities on the statement of cash flows using the indirect method.
a. True
b. False
Answer:
a. True
Explanation:
When we have to adjust and converted the net income into the cash basis the gain is subtracted and losses are added to the net income in the operating activities section of the cash flow statement
Since there is the gain or loss from the retirement of the bonds so the same should be deducted or added to the net income as the case may be
Therefore the correct option is a.
Listed below are five technical accounting terms. Each of the following statements describes one of these technical terms. For each statement, indicate the term described.
Opportunity cost
Out-of-pocket cost
Joint products
Incremental analysis
Sunk cost
Split-off point
Relevant information
Each of the following statements may (or may not) describe one of these terms. For each statement, indicate the accounting term or terms described, or answer "none" if the statement does not correctly describe any of these terms.
a. Examination of differences between costs to be incurred and revenue to be earned under different courses of action.
b. A cost incurred in the past that cannot be changed as a result of future actions.
c. Costs and revenue that are expected to vary, depending on the course of action decided on.
d. The benefit foregone by not pursuing an alternative course of action.
e. Products made from common raw materials and shared production processes.
f. A cost yet to be incurred that will require future payment and may vary among alternative courses of action.
g. The point at which manufacturing costs are split equally between ending inventory and cost of goods sold.
Answer:
a. Incremental analysis.
b. Sunk cost.
c. Relevant information.
d. Opportunity cost.
e. Joint products.
f. Out-of-pocket cost.
g. Split-off point.
Explanation:
a. Incremental analysis: examination of differences between costs to be incurred and revenue to be earned under different courses of action.
b. Sunk cost: a cost incurred in the past that cannot be changed as a result of future actions. Sunk cost can be defined as a cost or an amount of money that has been spent on something in the past and as such cannot be recovered.
c. Relevant information: costs and revenue that are expected to vary, depending on the course of action decided on. Hence, relevant cost are relevant for decision-making purposes but not sunk costs.
d. Opportunity cost: the benefit foregone by not pursuing an alternative course of action. Opportunity cost also known as the alternative forgone, can be defined as the value, profit or benefits given up by an individual or organization in order to choose or acquire something deemed significant at the time.
e. Joint products: products made from common raw materials and shared production processes.
f. Out-of-pocket cost: a cost yet to be incurred that will require future payment and may vary among alternative courses of action.
g. Split-off point: the point at which manufacturing costs are split equally between ending inventory and cost of goods sold. Thus, it give rise to joint products that emerge from the same raw materials and a shared manufacturing process.
A bank has $200 comma 000 of checkable deposits and a required reserve ratio of 5 percent. The bank currently holds $190 comma 000 in reserves. How much of these reserves are excess reserves?
Answer:
$180,000
Explanation:
Reserves is the total amount of a bank's deposit that is not given out as loans
There are two types of reserves
required reservesexcess reservesRequired reserves is the percentage of deposits required of banks to keep as reserves by the central bank
Required reserves = reserve requirement x deposits
0.05 x $200,000 = $10,000
Excess reserves is the difference between reserves and required reserves
$190,000 - 10,000 = $180,000
