Answer:
Por ejemplo, el petróleo o el carbón son ejemplos de recursos no renovables porque, aunque se forman mediante un proceso natural, este necesita demasiado tiempo. ... Esos combustibles fósiles provienen de materia orgánica, pero tardan cientos de miles de años en producirse.
Which list BEST identifies how the arrows should be arranged around the paper leaf in the model to represent the movement of matter and flow of energy during photosynthesis? A. Point into Leaf: sugars, oxygen (02), Point away from leaf: carbon dioxide(CO2), water(H2O) B. Point into Leaf: sugars, sunlight, Point away from leaf: carbon dioxide(CO2), oxygen (02), water(H2O) C. Point into Leaf: water(H2O), sunlight, Point away from leaf: carbon dioxide(CO2), sugars, oxygen (02) D. Point into Leaf: water(H2O), carbon dioxide(CO2) sunlight, Point away from leaf: sugars, oxygen (02
Answer:
D. Point into Leaf: water(H₂O), carbon dioxide (CO₂) sunlight, Point away from leaf: Sugars, oxygen (O₂)
Explanation:
Photosynthesis is the process used in the production of chemical energy in the form of energy containing organic compounds and oxygen from atmospheric carbon dioxide and liquid water enabled with the energy captured from light (mainly Sunlight) by the chlorophyll in green plants and other organisms
The basic chemical reaction involved in a photosynthesis reaction is presented as follows;
[tex]{}[/tex] Sunlight
[tex]{}[/tex] ↓
[tex]{}[/tex] CO₂ + H₂O (l) → C₆H₁₂O₆ + O₂
Carbon dioxide [tex]{}[/tex] Water Glucose Oxygen
Matter takes up _____.
(a) Space and temperature
(b) Space and heat
(c) Space and mass
(d) Heat and temperature
Por qué razón se fomenta la inmigración Europea?
Hola aquí va la respuesta!
Se fomentó la inmigración europea porque la economía no era buena y vinieron a Paraguay para mejorar su situación.
Hola aquí va la respuesta!
Se fomentó la inmigración europea porque la economía no era buena y vinieron a Paraguay para mejorar su situación.
show using dots to illustrate high population density and low population density in the boxes provided in answer to guide questions
Answer:
Just add a plenty of dots in the first one and very few dots in the second one
An area with high population density will have many dots while areas will low population density will have few dots when using dots to illustrate population density.
What is population density?Population density is the ratio of the total number of organisms found in a given area to the total of the area of that place or habitat.
Population density = total number of organisms/total areaAn area with high population density indicates that more organised ate found per unit area than an area with low population density.
Therefore, using dots to illustrate population density, an area with high population density will have plenty dots while areas will low population density will have few dots scattered over.
Learn more about population density at: https://brainly.com/question/13902749
Use mathematics to prove that the 5.50 grams of salicylic acid (C7H6O3) used in this experiment is equal to 0.04 mol.
Answer:
Please find the answer to the question below
Explanation:
In chemistry, the following mathematical formula is used to calculate the number of moles contained by a substance:
mole = mass of substance (g)/molar mass of substance (g/mol)
Molar mass of salicylic acid (C7H6O3) = 12(7) + 1(6) + 16(3)
= 84 + 6 + 48
= 138g/mol
Mass = 5.50grams
mole = 5.5/138
mole = 0.039
Approximately, the number of moles of 5.5grams of salicylic acid is 0.04moles. This is in accordance with the mole value (0.04) given in this question.
What makes radioisotopes useful for dating objects?
O A. They have unique emission spectra.
O B. They decay at a predictable rate.
C. Their decay products are easy to detect.
O D. They all have extremely long half-lives.
Answer:A
Explanation:
Option D. They all have extremely long half-lives makes radioisotopes useful for dating objects.
What are radioisotopes?Radioisotopes exist as radioactive isotopes of an element. They can also be described as atoms that include an unstable combination of neutrons and protons, or surplus energy in their nucleus.
A radionuclide exists as a nuclide that contains excess nuclear energy, causing it unstable. This excess energy can be utilized in one of three methods: emitted from the nucleus as gamma radiation; assigned to one of its electrons to terminate it as a conversion electron; or utilized to create and emit a unique particle from the nucleus.
Radioactive isotopes of radium, thorium, and uranium, for example, exist found naturally in rocks and soil. Uranium and thorium also happen in trace amounts in water. Radon, induced by the radioactive decay of radium, stands present in the air.
Hence, Option D. They all have extremely long half-lives makes radioisotopes useful for dating objects.
To learn more about radioisotopes refer to:
https://brainly.com/question/18640165
#SPJ2
Which equation represents the correct net ionic equation for the reaction between Ca(OH)2 and H2SO4?
Upper H superscript plus, plus upper O upper H superscript minus right arrow upper H subscript 2 upper O.
2 upper H superscript plus, plus 2 upper O upper H superscript minus right arrow upper H subscript 2 upper O.
Upper C a superscript 2 plus, plus 2 upper O upper H superscript minus, plus upper S upper O subscript 4 superscript 2 minus right arrow upper C a superscript 2 plus, plus upper S upper O subscript 4 superscript 2 minus, plus 2 upper H subscript 2 upper O.
Upper C a (upper O upper H) subscript 2 plus upper H subscript 2 upper S upper O subscript 4 right arrow upper C a upper S upper O subscript 4 plus 2 upper H subscript 2 upper O.
Answer: The correct net ionic equation for the reaction is [tex]2H^{+}(aq)+2OH^{-}(aq)\rightarrow 2H_2O(l)[/tex]
Explanation:
Net ionic equation is defined as the equations in which spectator ions are not included.
Spectator ions are the ones that are present equally on the reactant and product sides. They do not participate in the reaction.
The balanced molecular equation is:
[tex]Ca(OH)_2(aq)+H_2SO_4(aq)\rightarrow CaSO_4(aq)+2H_2O(l)[/tex]
The complete ionic equation follows:
[tex]Ca^{2+}(aq)+2OH^-(aq)+2H^+(aq)+SO_4^{2-}(aq)\rightarrow 2Ca^{2+}(aq)+SO_4^{2-}(aq)+H_2O(l)[/tex]
As calcium and sulfate ions are present on both sides of the reaction. Thus, they are considered spectator ions.
The net ionic equation follows:
[tex]2H^{+}(aq)+2OH^{-}(aq)\rightarrow 2H_2O(l)[/tex]
Hence, the correct net ionic equation for the reaction is [tex]2H^{+}(aq)+2OH^{-}(aq)\rightarrow 2H_2O(l)[/tex]
Answer:
B. no reaction
Explanation:
Which sequence of steps describes the life cycle of a lake?
A. Runoff fills a depression - sediments build up - water becomes
increasingly shallow
B. Runoff fills a depression - sediments are eroded - water becomes deeper
C. Runoff fills a depression - sediments build up
- water rises continuously
D. Runoff fills a depression - sediments are eroded - water spreads over a wider area
Answer:
The actual sequence of steps which describe the life cycle of a lake is given below:
C. Runoff fills a depression - sediments build up
- water rises continuously
Explanation:
This is because, the water which builds up as a result of the runoff water accumulating on the depression helps towards building up. When it must have accumulated greatly, it ends up forming a lake.
Michael is studying the factors that affect corrosion of metals. He wants to test the effect that different concentrations of an acid will have on the corrosion of a metal. As he sets up and completes his experiment, which of the following experimental designs would be most likely to help him answer his question? A. Allow several metal samples to soak in different amounts of acid of a single concentration and then measure the amount of corrosion on each. B. Prepare solutions of different acid concentrations, measure 50 milliliters of each into different beakers, and place metal samples of different types but of the same mass into the beakers. C. After allowing several small metal sheets to be exposed to different acid concentrations, measure the surface area of each that is corroded. D. After allowing a small metal sheet to be exposed to one acid concentration, place it in different acid concentrations, then measure the surface area that is corroded.
Answer:
B. Prepare solutions of different acid concentrations, measure 50 milliliters of each into different beakers, and place metal samples of different types but of the same mass into the beakers.
Explanation:
Since Michael is studying the factors that affect corrosion of metals, and wants to test the effect that different concentrations of an acid will have on the corrosion of a metal, using different acid concentrations of the same volume on different metal samples of the same size would give a much better than all the other options because, a standard volume of acid is used and also a standard mass of metal is used. So, the effect can be measured quantitatively since we have the same quantity of sample.
So, option B is the answer
i need help answering this question on my homework, could anyone help?
Si se hace reaccionar CH3CH3 (etano) con cloro, en presencia de luz ultravioleta, los productos obtenidos en este paso son
Answer:
La reacción de etano, CH₃CH₃ y cloro, Cl₂ en presencia de luz solar se conoce como reacción de halogenación.
Los radicales de cloro se forman cuando el cloro se expone a la luz solar a continuación;
Cl₂ → 2Cl *
Se forma un radical etano cuando el etano, C₂H₆ reacciona con un radical libre de cloro, Cl *, como sigue;
C₂H₆ + Cl → C₂H₅ * + HCl
Se forma un producto halogenado cuando un radical libre de etano reacciona con una molécula de cloro como sigue;
C₂H₅ * + Cl₂ → C₂H₅Cl + Cl *
Un producto halogenado puede reaccionar además con un radical libre para producir como sigue;
C₂H₅Cl + Cl * → C₂H₅Cl₂
Explanation:
Help me with this this is something i dont know and its not on here please help meeeeeee
Answer:
it would be option A
Explanation:
This is becuase if you look at the chart you can see tyhat the group of rats that got feed to vitamans did gain more wati then the ones on the normal diet.
Which substance would you expect to dissolve most rapidly in 100 mL water?
A
0.4 g granulated sugar
B
0.2 g powdered sugar
C
0.4 g powdered sugar
D
0.2 g sugar cube
Answer:
b because it is just 0.2 g and powdered sugar has more contact surface than granulated sugar or sugar cube
The solubility can be given as the amount of solute that can be dissolved in the 100 ml of the solution. The most rapidly dissolved sugar in water is 0.2 gram powdered sugar.
What is a contact surface?The contact surface can be given as the area of the compound that is in direct contact with the solution.
The solubility of the compound is found more in the solute with increased surface area.
The surface area of powdered sugar will be maximum, as more granules of the sugar will be in contact with the water than the cube or the granulated sugar.
Thus, the most rapid dissolution in water is found with 0.2 grams of powdered sugar. Thus, option B is correct.
Learn more about solubility, here:
https://brainly.com/question/13620168
Which of these is true about a pH meter?
It is inexpensive to use.
It measures pH indirectly.
It does not require calibration.
It can be used in any acid-base titration.
Answer:
That is, a pH meter is useful in detecting or knowing the acidity (due to ions) or alkalinity (due to ions) of a solution. Thus, we can conclude that out of the given options it is true about a pH meter that it can be used in any acid-base titration
Answer: D. It can be used in any acid-base titration.
Explanation:
What is the delta H when 72.0 grams H2O condenses at 100.00C?
Here are some constants that you MAY need.
specific heats heat of fusion heat of vaporization
H2O(s) = 2.1 J/g0C 6.01 kJ/mole 40.7 kJ/mole
H2O(L) = 4.18 J/g0C
H2O(g) = 1.7 J/g0C
2930 kJ
163 kJ
-163 kJ
-2930 kJ
Answer: The value of [tex]\Delta H[/tex] is -163 kJZ
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
We are given:
Given mass of water = 72.0 g
Molar mass of water = 18 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of water}=\frac{72.0g}{18g/mol}\\\\\text{Moles of water}=4mol[/tex]
Calculating the heat released for the condensation process:
[tex]\Delta H=n\times \Delta H_{(vap)}[/tex] ......(2)
where,
[tex]\Delta H[/tex] = amount of heat released
n = number of moles of water = 4 moles
[tex]\Delta H_{(vap)}[/tex] = specific heat of vaporization = -40.7 kJ/mol
Negative sign represents the amount of heat released.
Putting values in equation 2:
[tex]\Delta H=4mol\times (-40.7kJ/mol)=-163kJ[/tex]
Hence, the value of [tex]\Delta H[/tex] is -163 kJ
copper +sulfur + oxygen =
Write the net ionic equation. Don't worry about identifying the state of matter. 2 NH4Cl (aq) + 1 Mg(OH)=2NH3 (g) + 2H2O (l) + 1 MgCl2 (aq)
Answer:
2NH4^+(aq) + 2OH^-(aq) ----->2NH3(g) + 2H2O(l)
Explanation:
Molecular balanced reaction equation;
2NH4Cl (aq) + Mg(OH)2---->2NH3 (g) + 2H2O (l) + MgCl2 (aq)
Complete ionic reaction equation;
2NH4^+(aq) + 2Cl^-(aq) + Mg^2+(aq) + 2OH^-(aq) ----->2NH3(g) + 2H2O(l) + Mg^2+(aq) + 2Cl^-(aq)
Net Ionic reaction equation;
2NH4^+(aq) + 2OH^-(aq) ----->2NH3(g) + 2H2O(l)
