PLZ HELP ME WITH MY WORK​

500kg, 42m, 675g, and 10m/s are all examples of a: continuous data.

A numerical data can be defined as a data set that is expressed in numbers only or a data set consisting of numbers rather than words. A numerical data is also known as a quantitative data.

Generally, numerical data are classified into two (2) main categories and these are;

In conclusion, mass (500 kg), height (42m), mass (675g), and speed (10m/s) are all examples of a: continuous data.

Find more information: https://brainly.com/question/96076

Answer:

single, double, and triple bonds

Answer:

b) it gets accumulated in the respiratory system which then halts or slows down the supply of oxygen to the brain hence leading to death

Answer:

It because ,sodium is a metal and chlorine is a non metal

Answer:  1)  temperature, 2) add a catalyst, and 3) concentrations

Explanation:  A rise in temperature adds kinetic energy to the reactants, leading to more frequent, and energetic collisions, which will often accelerate the reaqction.  A catalyst is an agent that helps the reaction move forward more quickly by offering a substrate that aids in orienting the reactants for more efficient reaction.  A higher concentration increases the chances of collisons that result in products.

Answer:

C2H4 Ethylene

Explanation:

Hope it helps! :)

Answer:

nitrogen is used in the production of  1) fertilisers  2) nitric acid  3) nylon  4) dyes  and  5) explosives

please give me brainliest if you can :))

Answer:

oxygen molecule has two oxygen atom . Each O atom share 2 electrons to form two covalent bonds out of which one is sigma bond and other is pi bond . sigma bond is formed by axial overlap 2p atomic orbitals of oxygen and pi bond is formed of lateral overlap of 2p atomic orbitals of oxygen .

Explanation:

here's the answer to your question

double arrow just mean that it's a reversible process, and the reaction can go back and forth.

Answer:

Filtiration technique

Explanation:

Answer:

Ver las respuestas abajo.

Explanation:

Este problema se puede resolver conociendo la relacion entre horas y minutos, sabemos que:

1 hora [h] → 60 minutos [min]

De esta manera:

2 [min] = 2/60 = 0.033 [h]

15 [min] = 15/60 = 0.25 [h]

30 [min] = 30/60 = 0.5 [h]

10 [min] = 10/60 = 0.166 [h]

6 [min] = 6/60 = 0.1 [h]

20 [min] = 20/60 = 0.33 [h]

5 [min] = 5/60 = 0.0833 [h]

Answer:

sodium chloride

hope that helped :)

Answer:

Chlorine is a greenish yellow gas at room temperature and atmospheric pressure. ... yielding chlorine water, and from this solution a solid hydrate of ideal ...

Answer:

Nitrogen oxides are used in the production of nitric acid, lacquers, dyes, and other chemicals. Nitrogen oxides are used in rocket fuels, in the nitrification of organic chemicals, and in the manufacture of explosives.

Explanation:

Answer:

Pb2+ (aq) + CrO42-(aq) --> PbCrO4(s) - A precipitation reaction

2 Mg(s) + O2(g) -> 2 MgO(s) - An oxidation-reduction reaction that is also a synthesis reaction

Ag^+ (aq) + 2NH3(aq) --> [Ag(NH3)2]^+ (aq) - A Lewis acid-base reaction the produces a coordination complex

Explanation:

A precipitation reaction is one in which two aqueous reactants yields an insoluble product called a precipitate as shown in reaction 1 above.

In the second reaction Mg is oxidized from zero to + 2 while oxygen was reduced from zero to -2 as the MgO is formed hence the reaction is an oxidation-reduction reaction that is also a synthesis reaction.

In the third reaction, Ag^+ a Lewis acid reacts with NH3, a lewis base to yield the complex [Ag(NH3)2]^+.

Answer:

The mitochondria

Explanation:

Its where cellular respiration occurs

Aromatic compounds are compounds that contain carbon-carbon multiple bonds.

The question did not mention that a heteroatom is present in the compound so we can assume that there is none of such. In that case, the compound contains only hydrogen and carbon.

So,

(CH)n = 78

where n is the number of each atom present.

(12 +1)n = 78

n = 78/13

n = 6

The molecular formula of the compound is C6H6

When C6H6 is treated with .conc.HNO3/conc.H2SO4 the compound shown in image 1 is formed. The reaction occurs at the C-C multiple bond.

When C6H6 is reacted with chlorine in the presence of sunlight, hexachlorobenzene (shown in image 2 attached) is formed.

https://brainly.com/question/24305135

Answer:

2NaOH+ H2SO4 → Na2SO4 + 2H2O

HAVE A GREAT DAY :)

Answer:

Sodium+sulphate=Na2SO4

Acidsodium sulphate + hydrogen=Na2SO4+H2O

Answer:

Analytical Chemist

Forensics

Toxicologist

Biochemist

Chemical Engineer

Laboratory Technician

Pharmacologist

Chemical Technician

Materials Scientist

Environmental Chemist

Answer:

The molar mass of C6 H12 O6 is 180.15588 g/mol.

Explanation:

Force = The external energy that changes or tends to change the state of any body or object is called force.

Speed = The rate of distance is called speed.

Answer:

Force is a push or pull which changes or tend to change the position of a body.

The rate of change its position with time or magnitude is called speed.

Answer:

A 1.732 g sample of iron is heated in air. It oxidizes to form a product with a mass of 2.205 g. What is the empirical formula of the product? FeO 4. Caffeine is made of 49.48% carbon, 5.19% hydrogen, 28.85% nitrogen, and 16.48% oxygen by mass.

Explanation:

The empirical formula of the product formed by the reaction of iron and oxygen is FeO.

Let's consider the following generic chemical equation:

Fe + O₂ ⇄ FexOy

According to the law of conservation of mass, the sum of the masses of the reactants is equal to the sum of the masses of the products. The mass of O₂ that reacted, and remains in the oxide is:

[tex]mFe + mO_2 = mFexOy\\mO_2 = mFexOy - mFe = 2.205 g - 1.732 g = 0.473 g[/tex]

The oxide has 1.732 g of Fe and 0.473 g of oxygen and a total mass of 2.205 g. To determine the empirical formula, we need to calculate the percent composition.

[tex]\%Fe = \frac{mFe}{mFexOy} \times 100 \% = \frac{1.732 g}{2.205 g} \times 100 \% = 78.55\%[/tex]

[tex]\%O = \frac{mO}{mFexOy} \times 100 \% = \frac{0.473 g}{2.205 g} \times 100 \% = 21.45\%[/tex]

Now, we will divide each percentage by the atomic mass of the element.

[tex]Fe: 78.55/55.85 = 1.406\\O: 21.45/16.00 = 1.340[/tex]

Finally, we divide both numbers by the smallest one.

[tex]Fe: 1.406/1.340 \approx 1 \\O: 1.340/1.340 = 1[/tex]

The empirical formula of the product is FeO.

You can learn more about empirical formulas here: https://brainly.com/question/1363167

Answer:

The correct answer would be 3. The number of atoms of each element in the reactants equals the number of atoms of each element in the products.

Explanation:

The law of conservation of matter states that energy cannot be created or destroyed, only transfered. Thus, option 3 is correct.

Answer:

129 g of CuO

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

CuCO₃ —> CuO + CO₂

Next, we shall determine the mass of CuCO₃ that decomposed and the mass of CuO produced from the balanced equation. This can be obtained as follow:

Molar mass of CuCO₃ = 64 + 12 + (16×3)

= 64 + 13 + 48

= 124 g/mol

Mass of CuCO₃ from the balanced equation = 1 × 124 = 124 g

Molar mass of CuO = 64 + 16

= 80 g/mol

Mass of CuO from the balanced equation = 1 × 80 = 80 g

SUMMARY:

From the balanced equation above,

124 g of CuCO₃ decomposed to produce 80 g of CuO.

Finally, we shall determine the mass of CuO produced by the decomposition of 200 g of CuCO₃. This can be obtained as follow:

From the balanced equation above,

124 g of CuCO₃ decomposed to produce 80 g of CuO.

Therefore, 200 g of CuCO₃ will decompose to produce

= (200 × 80)/124 = 129 g of CuO.

Thus, 129 g of CuO was obtained from the reaction.

Answer:

Acid is a molecule capable of donating hydrogen ion and they form aqueous solutions with a sour taste while base is a substance that accepts proton from proton donor and in aqueous solution, they have an astringent or bitter taste. Moreover, a good example for base is sodium hydrogen carbonate as baking soda or baking powder and for acid, the most common example is the acetic acid or vinegar.

Answer:

Well, for starters, bases mostly consist of soaps and cleaning products, acids consist of vinegar,lemon,and stuff like that. Most acids on the basis of touch can burn your skin or be very sour, unlike bases which are more soapy and have a cleaner touch.A good example of an acid is vinegar, which can be used for cleaning but can also be used for making foods, on the other hand. A good example of a base is dish soap. It is used for cleaning.

Explanation:

i just did the exam and got a 100

Answer:

[tex]\boxed {\boxed {\sf 2.36 \ mol \ SO_2}}[/tex]

Explanation:

We are asked to convert grams to moles. We will use the molar mass and dimensional analysis to perform this conversion.

The molar mass is the mass of 1 mole of a substance. These values are found on the Periodic Table because they are equivalent to the atomic masses, but the units are grams per mole instead.

We are given a mass of sulfur dioxide (SO₂). Look up the molar masses of the individual elements.

Notice that the formula of the compound contains a subscript. The subscript after O means there are 2 moles of oxygen in 1 mole of sulfur dioxide. We must multiply oxygen's molar mass before adding sulfur's.

Now we will use dimensional analysis to convert grams to moles. From the molar mass, we know there are 64.068 grams of sulfur dioxide per mole, so we can set up a ratio.

[tex]\frac {64.068 \ g \ SO_2} {1 \ mol \ SO_2}[/tex]

We are converting 151 grams to moles, so we multiply by this value.

[tex]151 \ g \ SO_2 *\frac {64.068 \ g \ SO_2} {1 \ mol \ SO_2}[/tex]

Flip the ratio so the units of grams of sulfur dioxide cancel.

[tex]151 \ g \ SO_2 *\frac {1 \ mol \ SO_2}{64.068 \ g \ SO_2}[/tex]

[tex]151 *\frac {1 \ mol \ SO_2}{64.068 }[/tex]

[tex]\frac {151}{64.068 } \ mol \ SO_2[/tex]

[tex]2.356870825 \ mol \ SO_2[/tex]

The original measurement of grams (151) has 3 significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place. The 6 in the thousandth place tells us to round the 5 in the hundredth up to a 6.

[tex]2.36 \ mol \ SO_2[/tex]

151 grams of sulfur dioxide is approximately 2.36 moles of sulfur dioxide.

Answer:

Neutron, neutral subatomic particle that is a constituent of every atomic nucleus except ordinary hydrogen. It has no electric charge and a rest mass equal to 1.67493 × 10−27 kg—marginally greater than that of the proton but nearly 1,839 times greater than that of the electron.

The correct option is D. 2) Anti-bonding electrons or lone pairs. These lone pairs, and bonds helps to form the shape which keeps these electrons separate as possible.

Answer:

Heat treatment is the process of heating metal without letting it reach its molten, or melting, stage, and then cooling the metal in a controlled way to select desired mechanical properties. Heat treatment is used to either make metal stronger or more malleable, more resistant to abrasion or more ductile.

Ca^2+ ion  is smaller than Mg^2+ ion hence it has a greater heat of formation or lattice energy.

When a crystal lattice is formed, the energy that is released if the component ions of the compound are brought together from infinity is called the lattice energy. It is the energy released when a crystal lattice is formed from its component ions.

The question lets us know that the heat released by the compounds depends on the energy released upon formation of the compound. Hence, the higher the energy released upon formation, the higher the magnitude of heat released upon dissolution of the compound.

Recall that lattice energy depends on the size of the ions. Thus, the smaller the ions, the higher the lattice energy.

Ca^2+ is smaller than Mg^2+ hence more energy is given off when CaCl2  is formed than when MgCl2  is formed.

As stated above, the greater the lattice energy, the greater the heat released when the lattice dissolves and the higher the rise in temperature.

Putting all these together, Sample A must be CaCl2 while sample B must be MgCl2.

https://brainly.com/question/2815368