PLZ HELP ASAP!!!! THANK YOU The disturbance that occurs as longitudional waves travel through a medium can be described as a series of A:oscillations and refractions B:propagations and compressions C:destructions and constructions D:rarefactions and compressions

Answer:

HELLO BELOW IS THE ATTACHED DIAGRAM USED TO ANSWER YOUR QUESTION AS IT WAS MISSING

A) 1270⁰c

B) 65%

C) 1320⁰c

D)  62%

Explanation:

Nickel alloy composition : 50 wt% Ni - 50 wt%

initial temperature = 1200⁰c = 2190⁰F

A) The temperature at which the first liquid phase form

from the attached diagram the temperature at which the first liquid if formed is 1270⁰c ( at point 2 )

B ) The composition of this liquid phase ( THE FIRST LIQUID )

the composition is found at point 3

wt % of Nickel = 35%, wt% of copper = 100 - 35 = 65%

C ) The temperature at which the alloy melts completely

from the attached diagram the temperature = 1320⁰c ( point 4 )

D)  The composition of the last solid remaining prior to complete melting

this can be gotten at point 5 and calculated as

wt % of Ni = 62%

wt % of Cu = 100 - 62 = 38%

Answer:

22.2 m/s or 80 km/h

Explanation:

Given that

Distance travelled by the car, d = 240 km

Time taken by the car, t = 3 hours.

Speed of the car, v = ? m/s

for easy calculations, we will be converting the units to meters and seconds respectively.

240 km to meters would be

240 * 1000 m = 240000 m

3 hrs to seconds would be

3 * 60 mins * 60 seconds = 10800 s

now, we have our distance and time to be

d = 240000 m

t = 10800 s

speed is defined as the ratio of distance with respect to time taken, effectively,

Speed = distance/time

speed, v= 240000 / 10800

v = 22.2 m/s

therefore, the speed of the car during the time is 22.2 m/s, or if the speed is needed in km/h, we can convert it

22.2 * 3600/1000 =

80 km/h

This question is incomplete; here is the complete question:

Marco is conducting an experiment. He knows the wave that he is working with has a wavelength of 32.4 cm. If he measures the frequency as 3 hertz, which statement about the wave is accurate?

A. The wave has traveled 32.4 cm in 3 seconds.

B. The wave has traveled 32.4 cm in 9 seconds.

C. The wave has traveled 97.2 cm in 3 seconds.

D. The wave has traveled 97.2 cm in 1 second.

The answer to this question is D. The wave has traveled 97.2 cm in 1 second.

Explanation:

The frequency of a wave, which is in this case 3 hertz, represents the number of waves that go through a point during 1 second. According to this, if the frequency of the wave is 3 hertz this means in 1 second there were 3 waves. Moreover, if you multiply the wavelength (32.4cm) by the frequency (3) you will know the distance the wave traveled in 1 second: 32.4 x 3 =  97.2 cm. This makes option D the correct one as the distance in 1 second was 97.2 cm.

Answer:Is D!

Explanation:TEAT(Sorry) -_-*

Answer:

Well if they playing a game like that

Answer:

[tex]\boxed{0}[/tex]

Explanation:

Momentum is the measure of mass in motion.

[tex]\sf momentum = mass \times velocity[/tex]

An object at rest has a velocity of 0.

[tex]p=mv[/tex]

[tex]p = 25 \times 0[/tex]

[tex]p=0[/tex]

The momentum of an object at rest is always 0.

Explanation:

Volume is the amount of space an object takes up, while mass is the amount of matter in an object. ... To find the volume of an irregular sized object, one would use the displacement method for measuring volume and place the object in water and measure the amount of water that is displaced.

Answer:

To measure the volume of an irregularly shaped object, pour some water in a measuring cylinder. Then suspend the irregularly shaped object with a thread. After that , move the object gradually downwards and immerse it in water. The volume of the irregularly shaped object is the difference between the volume of the liquid before and after. After measuring the difference, we come to know about the volume of the irregularly shaped object.

Answer:

a)0.51°

b)1.47×10^-4m

Explanation:

a)for a single slit experiment, the minima that has an angle of θ towards the centre needs to satisfy the expression below.

bsin(θ)= mλ.........................(*)

Where b= width of the slit

The distance on the screen from Central angle can be expressed as

Sin(θ)= y/d............. (**)

d and y is the horizontal distance between slit and screen

If we input eqn(**) into equation (*) we have

y= mλd/b................(z)

In order to find angle (θ) we have

(θ)= sin-(1.99×10^-2)/2.25

= 0.51°

Therefore, angle of diffraction θ of the second minimum is 0.51°

b)to find the width of the sloth using eqn(z) by substitute the values, we have

b= (2)(649×10^-9)(2.25)/1.99×10^-2

b= 1.47×10^-4m

Therefore, the width of the slit is 1.47×10^-4m

Answer:

A. It is always a positive force

Explanation:

Hooke's law describes the relation between an applied force and extension ability of an elastic material. The law states that provided the elastic limit, e, of a material is not exceeded, the force, F, applied is proportional to the extension, x, provided temperature is constant.

i.e F = - kx

where k is the constant of proportionality, and the minus sign implies that the force is a restoring force.

The applied force can either be compressing or stretching force.

Answer:

1. direction of propagation of sound

2.medium through which sound trsnsmitted

Answer:

The first answer is W and Z, since they appear to be a period apart. Dont know the second question. I did what I could, hope someone can answer the second.

Answer:

First, as you may know, the light travels at a given velocity.

In vaccum, this velocity is c = 3x10^8 m/s.

And we know that:

distance = velocity*time

Now, if some object (like a star ) is really far away, the light that comes from that star may take years to reach the Earth.

This means that the images that the astronomers see today, actually happened years and years ago (So the night sky is like a picture of the "past" of the universe)

Also, for example, if an astronomer sees some particular thing, he can apply a model (a "simplification" of some phenomena that is used to simplify it an explain it) and with the model, the scientist can infer the information of the given thing some time before it was seen.

The astronomers could know what was happening inside galaxies way back then by the fact that;

they examine the spectra of galaxies (or the overall colors of galaxies) with the highest redshifts they can find

Astronomers Measure the wavelength of the light that is stretched, so the light is seen as 'shifted' towards the red part of the spectrum by using spectroscopy. This measure is also called redshift.

This invokes a ray of light through a triangular prism that splits the light into various components known as spectrum.

The way the astronomers could use this concept to know what was happening in the galaxies before is by examining the spectra of galaxies that have the highest redshifts.

Read more at; https://brainly.com/question/15995216

Answer:

The volume of the cavity is 0.013m^3

Explanation:

To find the volume of the cavity, the major parameter missing is the diameter of the cavity itself. we can obtain this using the following steps:

Step one:

Obtain the volume of the cylinder by dividing the mass of the cylinder by the density.

Volume of the cylinder = 2.1 / 11.053 =0.19[tex]m^{3}[/tex]

Step two:

From the volume of the cylinder, we can get the radius of the cylinder.

[tex]radius = \sqrt{\frac{V}{\pi \times h}} = \sqrt{\frac{0.19}{\pi \times 0.32}} =0.44m[/tex]

Step three:

From the cross-sectional area, we can obtain the radius of the cavity.

Let the radius of the cavity be = r, while the radius of the cylinder be = R

CSA of cavity =

[tex]\pi({R^2}-r^2) = CSA\\0.65 = \pi (0.32^2-r^2)\\r= 0.115m[/tex]

Step Four:

calculate the volume of the cavity using volume =[tex]\pi r^2 \times h[/tex]

Recall that the cavity has the same height as the original cylinder

[tex]volume = \pi \times 0.115^2\times 0.32= 0.013m^3[/tex]

Answer:

lathe

perfectly symmetrical

Answer: A lathe is used to turn wood . It rotates and carves wood to produce a perfectly symmetrical form .

First one is lathe .

Second one is perfectly symmetrical .

Explanation: I just took the test on Plato and had 100%

Answer:

The correct option is energy levels

Explanation:

Rutherford's model of an atom suggests that an atom has a tiny positively charged central mass (now called the nucleus) which is surrounded by electrons (negatively charged) in a cloud-like manner.

Bohr's model went a bit further than the Rutherford's model in describing an atom by suggesting that the electrons which surrounds in the nucleus travel in fixed circular orbits. This description by Bohr was able to describe the energy levels of orbitals which assumes that smallest orbitals have the lowest energy while the largest orbitals have the highest energy.

Answer:

energy levels

hope this helped!

Explanation:

Answer:

[tex]\Large \boxed{\mathrm{5.67 \ seconds }}[/tex]

Explanation:

[tex]\displaystyle \mathrm{acceleration \ = \ \frac{final \ velocity - initial \ velocity }{elapsed \ time}}[/tex]

[tex]\displaystyle A \ = \ \frac{V_f - V_i }{t}[/tex]

[tex]\displaystyle 3 \ = \ \frac{25 - 8 }{t}[/tex]

[tex]\displaystyle 3 \ = \ \frac{17 }{t}[/tex]

[tex]\displaystyle t \ = \ \frac{17 }{3} \approx 5.67[/tex]

Answer:

The answer  is The acceleration is double its original value.

Explanation:

Hope this helps....

Have a nice day!!!!

Answer:

The acceleration is half of its original value

Explanation:

Answer:

  2.4583 ± 0.0207 seconds

Explanation:

The time period of a pendulum is approximately given by the formula ...

  T = 2π√(L/g)

The maximum period will be achieved when length is longest and gravity is smallest:

  Tmax = 2π√(1.51/9.7) ≈ 2.47903 . . . seconds

The minimum period will be achieved for the opposite conditions: minimum length and maximum gravity:

  Tmin = 2π√(1.49/9.9) ≈ 2.43756 . . . seconds

If we want to express the uncertainty using a symmetrical range, we need to find half their sum and half their difference.

  T = (2.47903 +2.43756)/2 ± (2.47903 -2.43756)/2

  T ≈ 2.4583 ± 0.0207 . . . seconds

__

We have about 2+ significant digits in the given parameters, so the time might be rounded to 2.46±0.02 seconds.

Answer:

Water waves are an example of waves that involve a combination of both longitudinal and transverse motions. As a wave travels through the waver, the particles travel in clockwise circles. The radius of the circles decreases as the depth into the water increases.

Answer:

Answer:

27.34 (no unit)

Explanation:

26.975*82.33%+29.018*17.67%

=27.34

Answer:

4.0

Explanation:

The following data were obtained from the question:

Force (F) = 20 N

Mass (m) = 5 kg

Acceleration (a) =.?

Force is simply defined as the product of mass and acceleration. Mathematically, it is expressed as

Force (F) = mass (m) x acceleration (a)

F = ma

With the above formula, we can obtain th acceleration of the body as follow:

Force (F) = 20 N

Mass (m) = 5 kg

Acceleration (a) =.?

F = ma

20 = 5 x a

Divide both side by 5

a = 20/5

a = 4 m/s²

Therefore, the value that will complete the last cell in the question above is 4.

Answer:

Explanation:

Average rate = gallons / minutes

If 12.5gallons in 5mins

Xgallons in 1mins

12.5/5 = 2.5gallons per minute

Answer:

47.17 m

Explanation:

From the diagram of the question attached, The length of the legs are 25 m and 40 m . This legs form a right angle triangle with the length of the swimming course (L).

Pythagoras theorem states that for a right angle triangle with hypotenuse a and legs b and c, then:

a² = b² + c²

In the triangle, the length of the swimming course (L) is the hypotenuse and the two legs are 25 m and 40 m. Using Pythagoras:

L² = 25² + 40²

L² = 625 + 1600

L² = 2225

L = √2225

L = 47.17 m

Answer:

first part the skater goes down a constant slope ramp, initially he has Newton's second law

pply Newton's third law, the normal is the reaction to the support of the body on the surface

the ramp shoots off.  axis becomes zero and therefore with Newton's first law its speed

Explanation:

It is the description of this movement let's write Newton's laws.

* The first law that a body goes at constant speed or zero if the sum of the external forces is zero

* the second law is F = m a

* The third law states that the forces act in pairs of equal magnitude and opposite direction, one applied to each body.

Let's apply these laws to our case

In the first part the skater goes down a constant slope ramp, initially he has Newton's second law when he accelerates from the initial velocity of zero to a terminal velocity.

The expression for this is

             Wₓ - fr = ma

             W sin θ - μ W cos θ = m a

             W = mg

             g (sin θ - μ cos) = a

the value of the coefficient of kinetic friction depends on the condition of the surface, dry, wet or muddy

This is Newton's second law

On the Y axis, which is perpendicular to the ramp we have

            N- [tex]W_{y}[/tex] = 0

If we apply Newton's third law, the normal is the reaction to the support of the body on the surface, note that it can be different from the weight.

In the second part when he is on the ramp.

In the ramp the skater enters with a speed v, suppose that the ramp has an incline so that the skater can jump, in this case the angle is positive with respect to the axis x

In this case the analysis is similar to the previous one

Newton's second law gives the acceleration of the skater, who when he reaches the end of the ramp shoots off.

 At this point the force in the x (horizontal) axis becomes zero and therefore with Newton's first law its speed this axis remains constant and the force in the y axis is the force of gravity and has an acceleration that changes if velocity according to Newton's second law

Answer:look at explanations

Explanation:

Answer:

1) The density of the object = 2500 kg/m³

2) The density of the oil = 1250 kg/m³

Explanation:

1) The information relating to the question are;

The mass of the object in air = 0.250 kgf

The mass of the object in water = 0.150 kgf

The mass of the object in the oil  = 0.125 kgf

By Archimedes's principle, we have;

The upthrust on the object in water = Mass in air - mass in water = The weight of the water displaced

The upthrust on the object in water = 0.250 - 0.150 = 0.1 kgf

∴ The weight of the water displaced = 0.1 kgf

Given that the object is completely immersed in the water, we have;

The volume of the water displaced = The volume of the object

The volume of 0.1 kg of water water displaced = Mass of the water/(Density of water)

The volume of 0.1 kg of water = 0.1/1000 = 0.0001 m³

The density of the object = (Mass in air)/ volume = 0.250/0.0001 = 2500 kg/m³

The density of the object = 2500 kg/m³

2) Whereby the mass of the object in the oil = 0.125 kgf

The upthrust of the oil = The weight of the oil displaced

The upthrust of the oil on the object = Mass of the object in air - mass of the object in the oil

The upthrust of the oil on the object = 0.250 - 0.125 = 0.125 kgf

The weight of the oil displaced = The upthrust of the oil

Given that the volume of the oil displaced = The volume of the oil, we have;

The volume of the oil displaced = 0.0001 m³

The mass of the 0.0001 m³ = 0.125 kg

Therefore the density of the oil = 0.125/0.0001 = 1250 kg/m³.

The density of the oil = 1250 kg/m³.

Answer:

Average acceleration = Displacement / (time)^2

Explanation:

The unit for acceleration is

[tex]m {s}^{ - 2} [/tex]

Displacement = m

Time = s

Hence the units of displacement and time should be manipulated to get the unit of acceleration.

You can't. You can only find average velocity.

But if you also know that initial velocity is zero ... the object started from rest ... then

Avg acceleration =

2 x displacement / time-squared

Answer:

I assume its c. Since its talking about testing.

Explanation:

Answer:

The answer is test of durability

Explanation:

Answer: React with the skin

Explanation:

lab safety test Safety goggles and an apron must be worn when handling chemicals labeled corrosive because they React with the skin

Answer:

Positive

Explanation:

In an endothermic reaction, the products are at a higher energy than the reactants. This means that the enthalpy change of the reaction (∆H) is positive