Pls help!!!

Possible answers

Al m=5. L0=14, NO-12
B) m=7, 10= 14, NO= 14
C m=7, LO=12, NO= 12
D) m=4, L0=13, NO = 14
E) m=5, LO= 14, NO= 15

Random sampling 50 batteries throughout the day and testing to see if they would provide most valid results.

A sample is described as a smaller, more manageable representation of a larger group. A smaller population with characteristics of a larger one. A sample is used in statistical analysis when the population size is too large to include all participants or observations in the test.

The sample may be biased if it is taken from the first 25 batteries made each day or the last 25 batteries made each day.

The first and last battery made each day could not be an accurate representation of the total quality of the batteries produced that day if the battery manufacturing process is not consistent thought the day.

Although the battery quality can change during the day, sampling the first 50 batteries produced each day may also add bias into the sample.

The ideal course of action is to randomly select 50 batteries throughout the day, since this helps to ensure that the sample is reflective of the general calibre of batteries manufactured that day.

A more accurate image of the quality of the batteries manufactured can be obtained using this method, which is also more likely to capture any variations in battery quality over the day.

To know more about Random sampling go through:-

https://brainly.com/question/13219833

#SPJ4

we have

13x+6y=−30------------- > 6y=-30-13x--------------- > y=(-30-13x)/6

x−2y=−4-- > 2y=x+4-------- > y=(x+4)/2

Using a graphing tool---------- > see attached figure

the solution of the system is the point (-2.625,0688)

the best estimate pair for the solution to the system is (−2.5, 0.75)

Answer:

x = 36

Step-by-step explanation:

[tex] \frac{12}{14} = \frac{x}{42} [/tex]

[tex]x = 36[/tex]

[tex]42 \div 14 = 3[/tex]

[tex]3 \times 12 = 36[/tex]

For point, p divides the directed line segment xy so that the ratio of xp to py is 3 to 5 correct option is d. Point R is three-fifths of the way from point P to point Y along PY.

The directed line segments divide a line into ratios, and each ratio has different properties. The properties of ratios of points on a line are dependent on the way the line is divided. For instance, suppose point p divides the directed line segment xy so that the ratio of xp to py is 3 to 5. We can describe point r that divides the directed line segment yx so that the ratio of yr to rx is 5 to 3 as follows:
We can solve this problem using the concept of directed line segments and the properties of ratios of points on a line.

Since P divides the directed line segment XY in the ratio 3:5, we can write:

XP = (3/8)XY and PY = (5/8)XY

Now, let's consider the directed line segment YX. We want to find a point R on this segment such that YR:RX = 5:3.

We can express YR and RX in terms of XY using the fact that YX = -XY:

YR = (5/8)YX and RX = (3/8)YX

Substituting -XY for YX, we get:

YR = (-5/8)XY and RX = (-3/8)XY

To find the location of point R, we need to find the distance from Y to R along the directed line segment YX. We can do this by adding the distances from Y to P and from P to R:

YR = YP + PR

Using the ratios we derived earlier, we can express YP and PR in terms of XY:

YP = PY = (5/8)XY

PR = R - P = (3/8)XY - (3/8)XY = 0

Therefore, YR = (5/8)XY + 0 = (5/8)XY

This means that point R is located at a distance of 5/8 of the length of YX from Y. So, the correct answer is (d) Point R is three-fifths of the way from point P to point Y along PY.

To know more about the "directed line segment": https://brainly.com/question/12959377

#SPJ11

Answer:

-21

Step-by-step explanation:

y^2 + 8y - 9                       y = -6

(-6)² + 8(-6) - 9

36 - 48 - 9

-21

So, the answer is -21

Answer:y=\frac{7}{12}-i\frac{\sqrt{167}}{12},\:y=\frac{7}{12}+i\frac{\sqrt{167}}{12}

Step-by-step explanation:y=\frac{7}{12}-i\frac{\sqrt{167}}{12},\:y=\frac{7}{12}+i\frac{\sqrt{167}}{12}

The missing amounts for Walco Corporation and Gunther Enterprises assuming  all changes in stockholders equity are due to changes in retained earnings are
(a) Walco Corporation Total Stockholders' Equity =  $54,000
(b) Walco Corporation Total Assets = $182,000
(c) Walco Corporation Dividends = $47,100
(d) Gunther Enterprises Total Liabilities = $140,000
(e) Gunther Enterprises Total Stockholders' Equity = $91,500
(f) Gunther Enterprises Total Revenues =  $135,100

A balance sheet is a financial statement that reports a company's assets, liabilities, and stockholder equity on a specific date. Assets are resources a company owns that have monetary value, liabilities are obligations that must be paid in the future, and stockholder equity is the difference between a company's assets and liabilities. To calculate the missing amounts, you need to subtract the beginning of year figures from the end of year figures.

a) Total liabilities + Total stockholders' equity = Total assets

Total liabilities + $54,000 = $100,000

Total liabilities = $46,000

(b) Total assets = Total liabilities + Total stockholders' equity

Total assets = $128,000 + $54,000

Total assets = $182,000

(c) Changes during year in retained earnings = Total revenues - Total expenses - Dividends

Changes during year in retained earnings = $219,000 - $167,000 - $4,900

Changes during year in retained earnings = $47,100

The missing values for Gunther Enterprises:

(d) Total liabilities + Total stockholders' equity = Total assets

$67,500 + $(e) = $159,000

$(e) = $91,500

(f) Changes during year in retained earnings = Total revenues - Total expenses - Dividends

Changes during year in retained earnings = $(f) - $79,000 - $4,900

Changes during year in retained earnings = $(f) - $83,900

Using the balance sheet equation, we can find the missing values:

(d) Total liabilities = Total assets - Total stockholders' equity

Total liabilities = $159,000 - $67,500

Total liabilities = $91,500

(e) Total stockholders' equity = Total assets - Total liabilities

Total stockholders' equity = $190,000 - $50,000

Total stockholders' equity = $140,000

(f) Changes during year in retained earnings = Total revenues - Total expenses - Dividends

Changes during year in retained earnings = $219,000 - $79,000 - $4,900

Changes during year in retained earnings = $135,100

Therefore, the missing amounts are:

(a) Walco Corporation Total Stockholders' Equity =  $54,000
(b) Walco Corporation Total Assets = $182,000
(c) Walco Corporation Dividends = $47,100
(d) Gunther Enterprises Total Liabilities = $140,000
(e) Gunther Enterprises Total Stockholders' Equity = $91,500
(f) Gunther Enterprises Total Revenues =  $135,100

To learn more about the 'balance sheet':

https://brainly.com/question/1113933

#SPJ11

An assignment of probabilities to events in a sample space must obey all of the following: They must obey the addition rule for disjoint events, They must sum to 1 when adding over all events in the sample space, and The probability of any event must be a number between 0 and 1, inclusive. Hence, the correct option is All of the above.

Probability is the branch of mathematics that deals with the likelihood of a random event occurring. Probability is concerned with quantifying the probability of different results in a certain event.

The possibility that a specific event will occur is calculated using probability. Probability is calculated using several methods in mathematics, including axioms, probability spaces, events, random variables, and expectation values.

Learn more about Probability here: https://brainly.com/question/25839839

#SPJ11

$50 is one estimate for the cost of Carlotta's fees per individual. This is based on information from the article, which claims that some consumers pay $50 a session for Carlotta's services,

which are less expensive than conventional therapy. The precise price, however, is not stated and may change based on the client's financial status and the services rendered. Carlotta's services are priced in the article, although the details are not totally apparent. It states that Carlotta charges less than conventional therapy, indicating that her costs are reasonable and competitive. The article also mentions that some clients pay $50 for each session, which gives a particular pricing range. However, it is crucial to remember that the precise cost may change .

learn more about price  here:

https://brainly.com/question/19091385

#SPJ4

Answer:

(2, 0) and (-1, 0)

Step-by-step explanation:

[tex]4x^2 - 4x - 8 = 0 \text{ // Divide by 4} \\x^2 - x - 2 = 0\\\\x_{1, 2} = \frac{-(-1) \pm \sqrt{(-1)^2 - 4 \times 1 \times (-2)}}{2\times1}\\\\x_{1, 2} = \frac{1 \pm \sqrt{1 + 8}}2\\\\x_{1, 2} = \frac{1 \pm \sqrt9}2\\\\x_{1, 2} = \frac{1 \pm 3}2\\\\x_1 = \frac{1 + 3}2 = \frac42 = 2\\\\x_2 = \frac{1 - 3}2 = \frac{-2}2 = -1[/tex]

Therefore, the zeroes are (2, 0) and (-1, 0).

The utilization of the machines is the processing time for the machines divided by the cycle time: 14 / 20 = 0.7 or 70%.

The bottleneck resource in this process is the hand-dry step, as it is the only step that is performed manually and thus has limited capacity. The processing time for the hand-dry step is 6 minutes per car, which is longer than any of the other steps.

To calculate the flow rate of the process, we need to determine the cycle time, which is the time it takes to process one car through all the steps. The cycle time is the sum of the processing times for all the steps, which is 2 + 7 + 1 + 4 + 6 = 20 minutes per car.

To convert this to customers per hour, we divide the number of minutes per hour (60) by the cycle time: 60 / 20 = 3 customers per hour.

Therefore, the flow rate of the process is 14 cars per hour x 3 customers per hour = 42 customers per hour.

To calculate the utilization of the machines, we need to calculate the total time that the machines are processing cars. Since all the steps except for the hand-dry step are performed by dedicated machines, the total processing time for the machines is 2 + 7 + 1 + 4 = 14 minutes per car.

Therefore, the utilization of the machines is the processing time for the machines divided by the cycle time: 14 / 20 = 0.7 or 70%.

For more questions like Machines click the link below:

https://brainly.com/question/30695896

#SPJ11

Based on the given data, The shape's whole surface area is about 252 mm².

Based on the image, the shape appears to be a set of rectangles with different lengths and widths.

To find the area of this shape, we can break it down into smaller rectangles and add up their areas.

Starting from the bottom, we can see that the first rectangle has a length of 6 mm and a width of 4 mm. Its area is:

Area1

= 6 mm × 4 mm

= 24 mm²

Moving up to the second rectangle, we see that it has a length of 6 mm and a width of 3 mm. Its area is:

Area2

= 6 mm × 3 mm

= 18 mm²

The third rectangle has a length of 6 mm and a width of 5 mm. Its area is:

Area3

= 6 mm × 5 mm

= 30 mm²

The fourth rectangle has a length of 6 mm and a width of 3 mm. Its area is:

Area4

= 6 mm × 3 mm

= 18 mm²

The fifth rectangle has a length of 6 mm and a width of 15 mm. Its area is:

Area5

= 6 mm × 15 mm

= 90 mm²

The sixth rectangle has a length of 3 mm and a width of 9 mm. Its area is:

Area6

= 3 mm × 9 mm

= 27 mm²

Finally, the seventh rectangle has a length of 5 mm and a width of 9 mm. Its area is:

Area7

= 5 mm × 9 mm

= 45 mm²

To find the total area of the shape, we can add up the areas of all seven rectangles:

Total Area

= Area1 + Area2 + Area3 + Area4 + Area5 + Area6 + Area7

= 24 mm² + 18 mm² + 30 mm² + 18 mm² + 90 mm² + 27 mm² + 45 mm²

= 252 mm²

Therefore, the total area of the shape is approximately 252 mm².

To learn more about area click here

brainly.com/question/27683633

#SPJ4

As a result, the triangles and are similar triangles according to the meaning of similarity. Thus, the Angle-Angle Similarity Principle has been demonstrated.

Three straight edges and three angles make up a closed, two-dimensional triangle. By joining three non-collinear lines, it is created. One of the most fundamental geometric shapes, triangles are used in many disciplines, including physics, engineering, and construction. According to their edges and angles, triangles can be classified as equilateral, isosceles, scalene, acute, obtuse, or right triangles.

given

Take into account two triangles Z and T such that ZT ZX and ZUZY. We must demonstrate the similarity of these two shapes.

We are aware that if two triangles are similar, their respective sides and angles will be proportional.

Now, let's prove that the respective sides of these two triangles are proportional. Since ZT ZX, the respective sides of similar triangles result in TZ/ZX = TU/ZY. If we simplify this number, we obtain:

TU/ZX Equals TZ/ZY.

This demonstrates that the ratio between the respective sides of these two triangles.

As a result, the triangles and are similar triangles according to the meaning of similarity. Thus, the Angle-Angle Similarity Principle has been demonstrated.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1

The complete question is :- Write a proof of the Angle-Angle Similarity Theorem.

If two angles of one triangle are congruent to two angles of another triangle, then the triangles are similar.

Given: ZT ZX, ZUZY

Prove: Δτυν - ΔΧΥΖ

Dilate XYZ by the scale factor

Answer: The given equation 2x + 5y = 10 can be rewritten in slope-intercept form (y = mx + b) by solving for y:

2x + 5y = 10

5y = -2x + 10

y = (-2/5)x + 2

where the slope is -2/5.

Since we want to find the equation of a line parallel to this one, the slope of the new line will also be -2/5. We can use the point-slope form of the equation of a line to find the equation of the new line, using the point (0,-3):

y - y1 = m(x - x1)

where m is the slope and (x1, y1) is the given point.

Substituting m = -2/5, x1 = 0, and y1 = -3, we get:

y - (-3) = (-2/5)(x - 0)

y + 3 = (-2/5)x

y = (-2/5)x - 3

Therefore, the equation of the line parallel to 2x + 5y = 10 which passes through (0,-3) is y = (-2/5)x - 3.

Step-by-step explanation:

Answer:

2x + 5y = - 15

Step-by-step explanation:

the equation of a line in slope- intercept form is

y = mx + c ( m is the slope and c the y- intercept )

given

2x + 5y = 10 ( subtract 2x from both sides )

5y = - 2x + 10 ( divide through by 5 )

y = - [tex]\frac{2}{5}[/tex] x + 2 ← in slope- intercept form

with slope m = - [tex]\frac{2}{5}[/tex]

• Parallel lines have equal slopes , then

y = - [tex]\frac{2}{5}[/tex] x + c

the line crosses the y- axis at (0, - 3 ) ⇒ c = - 3

y = - [tex]\frac{2}{5}[/tex] x - 3 ← equation of parallel line in slope- intercept form

multiply through by 5 to clear the fraction

5y = - 2x - 15 ( add 2x to both sides )

2x + 5y = - 15 ← in standard form

Answer: 46.0 ft

Step-by-step explanation:

[tex]\text{sin} \ 24^o=\dfrac{x}{105}[/tex]

[tex]x=105 \ \text{sin 24}^o[/tex]

So, the distance above the ground is [tex]\text{105 sin} \ 24^o+3.25\thickapprox \boxed{46.0 \ \text{ft}}[/tex]

A relative efficiency greater than 1 means that the estimator is less efficient than the most efficient estimator. A relative efficiency less than 1 means that the estimator is more efficient than the most efficient estimator.

for such more questions on relative efficiency

https://brainly.com/question/12475011

#SPJ11

The radius of the cylinder is 3 inches.

What is the volume of a cylinder?

A cylinder is a three-dimensional solid with two parallel circular bases and a curved lateral surface connecting the two bases. The volume of a cylinder is given by the formula [tex]V = \pi r^2h[/tex], where r is the radius of the base, h is the height of the cylinder, and π is a constant value approximately equal to 3.14.

Calculating the value of radius :

We are given that the cylinder has a volume of 45 cubic inches and a height of 5 inches. Using the formula for the volume of a cylinder, we get:

[tex]V = \pi r^2h[/tex]

Substituting the given values, we get:

[tex]45 = \pi r^2(5)[/tex]

Simplifying the equation, we get:

[tex]9 = r^2[/tex]

Taking the square root of both sides, we get:

[tex]r = \pm 3[/tex]

Since the radius cannot be negative, we take the positive value of r, which is:

r = 3 inches

Therefore, the radius of the cylinder is 3 inches.

To know more about cylinder visit :

brainly.com/question/16134180

#SPJ1

By using  Bayes' theorem in probability.

a) The probability that isaac would not become a hurricane but remain a tropical storm when it reached the gulf of mexico is 0.31.

b) P(H|c) = 0.4493

c) It can be observed that the likelihood of a tropical storm developing into a hurricane decreases slightly when it passes over Cuba. This can be inferred from the fact that the conditional probability of a hurricane forming given that the storm has passed over Cuba (P(H|c) = 0.4493) is lower than the initial probability of 0.69.

a) The probability that Isaac would not become a hurricane but remain a tropical storm when it reached the Gulf of Mexico is:

P(not hurricane) = 1 - P(hurricane) = 1 - 0.69 = 0.31

So the probability is 0.31 (to 2 decimals).

b) We need to use Bayes' theorem to calculate the probabilities:

P(c|H) = P(H|c) * P(c) / P(H)

P(c|T) = P(T|c) * P(c) / P(T)

where c denotes passing over Cuba, H denotes becoming a hurricane, and T denotes remaining a tropical storm.

From the problem, we have:

P(H) = 0.69

P(T) = 1 - P(H) = 0.31

P(c|H) = 0.08

P(c|T) = 0.20

To calculate P(c), we need to use the law of total probability:

P(c) = P(c|H) * P(H) + P(c|T) * P(T)

= 0.08 * 0.69 + 0.20 * 0.31

= 0.1228

Now we can calculate P(c|H) and P(c|T):

P(c|H) = 0.08 * 0.69 / 0.1228

= 0.4493 (to 2 decimals)

P(c|T) = 0.20 * 0.31 / 0.1228

= 0.5065 (to 2 decimals)

To calculate P(H|c), we use Bayes' theorem again:

P(H|c) = P(c|H) * P(H) / P(c)

= 0.08 * 0.69 / 0.1228

= 0.4493 (to 4 decimals)

c) Passing over a landmass such as Cuba can alter the probability of becoming a hurricane because it can either enhance or weaken the storm. In this case, we can see that the probability of becoming a hurricane is actually slightly lower when a tropical storm passes over Cuba, as P(H|c) = 0.4493 is lower than the initial probability of 0.69. However, it is important to note that this is just one example and the effect of passing over a landmass can vary depending on many factors.

To know about "Bayes' theorem": https://brainly.com/question/14989160

#SPJ11

A person pays $1 to play a certain game by rolling a single die once. if a 1 or 2 comes up, the person wins nothing. if, however, the player rolls a 3, 4, 5, or 6 he or she wins the difference between the number rolled and $1, this means that the game is not fair, based on the expected value

We can see that the expected value of the game can be found by multiplying each payout by its probability of occurring and then summing up the results:Expected value = (0.2)($1) + (0.2)($1) + (0.2)($2) + (0.2)($3) + (0.2)($4) + (0.2)($0) + (0.2)($0)Expected value = $0.40 Since the expected value of the game is positive, it means that, over the long run, players are expected to make money on average. This means that the game is not fair.

See more about expected value at: https://brainly.com/question/14723169

#SPJ11

30 percent chance

There are 30 possible numbers that a player can get on their uniform. Out of these, there are 9 single-digit numbers (1, 2, 3, 4, 5, 6, 7, 8, and 9) and 21 double-digit numbers (10, 11, 12, ..., 29, 30).

If no two players can have the same number, then the probability that the first player will get a single-digit number is simply the number of single-digit numbers divided by the total number of possible numbers:

P(single-digit number) = 9/30 = 0.3

So the player is correct that there is a 30% chance that she will get a single-digit number on her uniform.

Answer:

Point-Slope Form: y - 1 = -1/2(x - 4) or Standard Form: y = -1/2x + 3

Step-by-step explanation:

For a line to be perpendicular, you take the negative inverse of the slope of 2x - y = 4. To do this, rearrange the y to one side and you get y = 2x - 4. The slope of the line is 2. So, taking the negative inverse would be -1/m (with m being slope of the the equation given in the problem. This would give you -1/2.

Using point slope formula, y - y1 = m(x - x1), you can plug in the point given, (4,1) and the slope you found to get y - 1 = -1/2(x - 4). For standard form, isolating the y gets you y = -1/2x + 3.

You can check your answer by using Desmos by putting in the line 2x - y = 4, the point (4,1), and the equation you got as your answer. You will see that the equation is perpendicular to 2x - y = 4 and passes through point (4,1). Your equation of the line is y - 1 = -1/2(x - 4) or y = -1/2x + 3

To make the table of 7, using the table of 4 and 3, we add the value of both table consecutively.

We have to make the table of 7, using table of 4 and 3.

As we know the table of 3 is:

3  6  9  12  15  18  21  24  27  30

As we know the table of 4 is:

4  8  12  16  20  24  28  32  36  40

To from the table of 7 using the table of 4 and 3 we add the consecutive value of both table respectively.

3 + 4    6 + 8    9 + 12    12 + 16    15 + 20    18 + 24    21 + 28    24 + 32      27 + 36    30+40

Now simplify

7    14    21    28    35    42    49    56    63    70

To learn more about addition link is here

brainly.com/question/29560851

#SPJ4

The complete question is:

Math 4th 11-4: Help bunty to make the table of 7, using table of 4 and 3.

The sequence of the questions is [tex]J/9[/tex] when you multiply [tex]J[/tex] by [tex]9[/tex] and the quotient by [tex]2[/tex].

In this example, the number being divided (15) is known as the result, and the number being divided by (3 in this instance) is known as the divisor. The quotient is the outcome of the division.

The result of dividing two integers is known as the quotient. Six divided into two results in the number three. Latin's "how many times" is the meaning of the word "quotient." It makes perfect sense: by dividing two numbers, you can determine "how many time" the two digits enters the first.

[tex]2 * (J/9)[/tex]

This means you first divide [tex]J[/tex] by [tex]9[/tex] to get the quotient, and then multiply the quotient by [tex]2[/tex]. So the order of operations is:

[tex]J/9[/tex]

Multiply the quotient by [tex]2[/tex]

For example, if [tex]J = 45[/tex], then:

[tex]J/9 = 45/9 = 5[/tex]

[tex]2 * (J/9) = 2 * 5 = 10[/tex]

So the result of multiplying [tex]J[/tex] by [tex]9[/tex] and then multiplying the quotient by [tex]2[/tex], when [tex]J = 45[/tex], is [tex]10[/tex].

To know more about quotient visit:

https://brainly.com/question/16675988

#SPJ1

The distribution is skewed to the right.

If the median is to the left of the center of the box and the right whisker is substantially longer than the left whisker in a box plot, then the distribution is skewed to the right.

This means that the majority of the data is clustered on the left side of the box plot and there are some extreme values on the right side that are causing the right whisker to be longer.

The median being to the left of the center of the box indicates that the data is not symmetric and is pulled to the left by the majority of the values.

Learn more about skewed distribution

brainly.com/question/1604092

#SPJ11

These expression is not true .

What is a mathematical expression?

A mathematical expression is a sentence that consists of at least two numbers or variables, the expression itself, at least one arithmetic operation, and the expression itself. Any one of the following mathematical operations could be used: addition, subtraction, multiplication, or division.

                                  For instance, the expression x + y is an expression with the addition operator placed between the terms x and y. Mathematicians utilize two different sorts of expressions: algebraic and numeric. Numeric expressions only contain numbers; algebraic expressions additionally incorporate variables.

-0.5(3x + 5) and -1.5x + 2.5 equivalent.

  by distributing the 0.5  = -1.5x + 2.5

                                       = -1.5x + 2.5

                       = 0.5(3*2 + 5 )

                     = - 1.5 * 2 + 2.5

                     = - 3 - 2.5  = -3 + 2.5

                         - 5. 5  = 0.5

this is not true. these expression is not true .

Learn more about expression

brainly.com/question/14083225

#SPJ1

The very low likelihood that there will be 45 or more people in the sample who have consumed alcoholic beverages.

a) The number of people in the sample expected to have consumed alcoholic beverages can be calculated as follows:First, we multiply the number of individuals in the sample by the proportion of people in that age group who drink alcohol.50 x 0.697 = 34.85Thus, we anticipate that about 34.85 people in the sample will have consumed alcoholic beverages.b) No, 45 or more accounts for six different events -- this wouldn't be surprising, you would not be surprised if the sample contained 45 or more people who have consumed alcoholic beverages. This is because it falls within the margin of error.c) To calculate the probability that 45 or more people in this sample have consumed alcoholic beverages, we will need to compute the z-score first.We use the following formula to calculate the z-score:$$z=\frac{x-\mu}{\frac{\sigma}{\sqrt{n}}}$$Where, x = 45μ = 0.697 x 50 = 34.85σ = √[(50 x 0.697 x 0.303)] = 3.77n = 50After plugging the values into the formula, we have:$$z=\frac{45-34.85}{\frac{3.77}{\sqrt{50}}}$$ = 3.89Since we are trying to determine the probability of having 45 or more people who have consumed alcoholic beverages, we will calculate the probability of having a z-score greater than or equal to 3.89.Instead of looking up the z-score in the z-table, we can use a calculator to determine the probability. From a standard normal distribution, the calculator provides the following output:P(Z ≥ 3.89) = 0.0000317Rounded to four decimal places, the probability is approximately 0.0000. Therefore, there is a very low likelihood that there will be 45 or more people in the sample who have consumed alcoholic beverages.

Learn more about Likelihood

brainly.com/question/16930699

#SPJ11

The slopes are,

1) 7/6

2)7/2

3) -1

4) -2

5) 10/9

What is slope?

Calculated using the slope of a line formula, the ratio of "vertical change" to "horizontal change" between two different locations on a line is determined. The difference between the line's y and x coordinate changes is known as the slope of the line.Any two distinct places along the line can be used to determine the slope of any line.

1) The given points , [tex](x_1,y_1) =(0,1)[/tex] and [tex](x_2,y_2) = (6,8)[/tex] then,

=> slope  = [tex]\frac{y_2-y_1}{x_2-x_1}[/tex] = [tex]\frac{8-1}{6-0} = \frac{7}{6}[/tex]

2) The given points [tex](x_1,y_1) =(-1,10)[/tex] and [tex](x_2,y_2) = (-5,-4)[/tex] then,

=> Slope = [tex]\frac{-4-10}{-5+1} = \frac{-14}{-4}=\frac{7}{2}[/tex]

3)  The given points [tex](x_1,y_1) =(-10,2)[/tex] and [tex](x_2,y_2) = (-3,-5)[/tex] then,

=> slope = [tex]\frac{-5-2}{-3+10} = \frac{-7}{7}=-1[/tex]

4)  The given points [tex](x_1,y_1) =(-3,-4)[/tex] and [tex](x_2,y_2) = (-1,-8)[/tex] then,

=> slope = [tex]\frac{-8+4}{-1+3} = \frac{-4}{2}=-2[/tex]

5)The given points [tex](x_1,y_1) =(0,1)[/tex] and [tex](x_2,y_2) = (-9,-9)[/tex] then,

=> slope = [tex]\frac{-9-1}{-9+0} = \frac{-10}{-9}=\frac{10}{9}[/tex]

Hence the slopes are,

1) 7/6

2)7/2

3) -1

4) -2

5) 10/9

To learn more about slope refer the below link

https://brainly.com/question/16949303

#SPJ1

The triangle LMN, with vertices L(6, −8), M(4, −4), and N(−12, 2), dilated with respect to the origin by a scale factor of 1/2, results in triangle L'M'N', with vertices L'(3, -4), M'(2, -2), and N'(-6, 1)

To dilate a triangle with respect to the origin, we need to multiply the coordinates of each vertex by the scale factor. In this case, the scale factor is 1/2, so we multiply each coordinate by 1/2.

The coordinates of L' are obtained by multiplying the coordinates of L by 1/2:

L'((1/2)6, (1/2)(-8)) = (3, -4)

The coordinates of M' are obtained by multiplying the coordinates of M by 1/2:

M'((1/2)4, (1/2)(-4)) = (2, -2)

The coordinates of N' are obtained by multiplying the coordinates of N by scale factor 1/2:

N'((1/2)×(-12), (1/2)×2) = (-6, 1)

Learn more about dilation here

brainly.com/question/26155897

#SPJ4

The given question is incomplete, the complete question is:

Triangle LMN with vertices L(6, −8), M(4, −4), and N(−12, 2) is dilated with respect to origin by a scale factor of 2 to obtain triangle L′M′N′. What are the new coordinates of  L′M′N′ ?

Answer:

Step-by-step explanation:

i think you have to times it

The statement that best describes the infοrmatiοn presented in the chart is: "The number οf hurricanes was increasing but has decreased in recent years."

Hurricanes, knοwn generically as trοpical cyclοnes, are lοw-pressure systems with οrganized thunderstοrm activity that fοrm οver trοpical οr subtrοpical waters. They gain their energy frοm warm οcean waters.

The chart shοws the number οf hurricanes οf categοry 1 οr higher that οccurred during specific series οf years, and it indicates that the number οf hurricanes increased frοm 13 in 1980-1989 tο 23 in 2000-2009, and then decreased tο 10 in 2010-2017.

Therefοre, the chart suggests that the number οf hurricanes was increasing, but it has decreased in recent years. The chart dοes nοt prοvide any infοrmatiοn abοut tοrnadοes in Finleyville οr the relatiοnship between the number οf hurricanes and temperature.

To know more about problems related to chart,

https://brainly.com/question/26851221

#SPJ1

The statement that best describes the information in the graph is: "The number of hurricanes has increased but decreased in recent years." The graph shows that the number of Category 1 or greater hurricanes increased from 1980 to 2009, but decreased from 2010 to 2017.