Please helpplease please..help

The mass of magnesium chloride produced from 2.30 moles of chlorine gas is 218.99 grams.

Stoichiometry refers to the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions.

According to this question, magnesium reacts with chlorine gas to form magnesium chloride as follows:

Mg + Cl₂ → MgCl₂

Based on the above chemical equation, 1 mole of chlorine gas forms 1 mole of magnesium chloride.

This means that 2.30 moles of chlorine gas will 2.30 moles of magnesium chloride.

Next, we convert moles of magnesium chloride to mass as follows:

molar mass of magnesium chloride = 95.211g/mol

mass of magnesium chloride = 95.211 × 2.30 = 218.99 grams.

Therefore, 218.99 grams of magnesium chloride will be formed.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

The structures are shown in the image attached.

A structural formula is the representation of the molecule in which all atoms and bonds in the molecule are shown.

Since the question requires that all the lone pairs, formal charges and sigma and pi bonds should be shown, then the simple condensed structural formula becomes insufficient in this case.

I have attached images of the structural formula of sodium benzoate (image 1), benzoic acid (image 2)  and tetrahydrofuran (image 3).

All the formal charges, lone pairs as well as sigma and pi bonds are fully shown.

https://brainly.com/question/9988658

The empirical formula is OsO₄ :

Explanation:

Osmium oxide contains osmium and oxygen only.

Thus, we shall determine the mass of oxygen in osmium oxide. This can be obtained as follow:

Mass of compound = 2.89 g

Mass of Os = 2.16 g

Mass of O = (Mass of compound) – (Mass of Os)

Mass of O = 2.89 – 2.16

Mass of O = 0.73 g

Finally, we shall determine the empirical formula of the compound. This can be obtained as follow:

Mass of Os = 2.16 g

Mass of O = 0.73 g

Os = 2.16 g

O = 0.73 g

Divide by their molar mass of

Os = 2.16 / 190 = 0.011

O = 0.73 / 16 = 0.046

Divide by the smallest

Os = 0.011 / 0.011 = 1

O = 0.046 / 0.011 = 4

Learn more: https://brainly.com/question/23629778

Las concentraciones en el equilibrio para la reacción química presentada son:

[tex][A] = [B] = 1-x = 1-0.69 = 0.31 M\\[C] = [D] = x = 0.69 M[/tex]

Consideremos la siguiente reacción química genérica:

A + B ⇄ C + D

Para calcular las concentraciones en el equilibrio, debemos construir una Tabla ICE. Cada fila representa una instancia (Inicial, Cambio, Equilibrio) y la completamos con la concentración o cambio de concentración ("x" para concentraciones desconocidas). Como inicialmente no hay productos, la reacción se desplazará hacia la derecha para alcanzar el equilibrio.

          A + B ⇄ C + D

I          1      1      0    0

C       -x    -x     +x    +x

E      1-x    1-x    x     x

La constante de equilibrio, Kc, es:

[tex]Kc = 5 = \frac{[C][D]}{[A][B]} = \frac{x^{2} }{(1-x)^{2} } \\\sqrt{5} = x/1-x\\x = 0.69[/tex]

Las concentraciones en el equilibrio son:

[tex][A] = [B] = 1-x = 1-0.69 = 0.31 M\\[C] = [D] = x = 0.69 M[/tex]

Puedes aprender más sobre equilibrio químico aquí: https://brainly.com/question/21632386

Answer:

2.01

Explanation:

First, let's convert grams to moles

(Na) 22.99 + (F) 18.998 = 41.988

Every mole of NaF is  41.988 grams

21/41.988 = 0.500143 moles of NaF

For every Cr+3, we will need 2 NaF, so Cr+3 will be half of NaF

0.500143/2 = 0.250071

molarity = moles/liters

0.250071/0.125 = 2.0057 M

Answer :

volume of a gas = weight * 22.4 l / gram molecular weight

volume of o2 = ?

weight given = 20.5 g

gram molecular weight of oxygen = 32 (because of 2 oxygen atoms )

volume of oxygen = 20.5 * 22.4 / 32

volume of oxygen = 14.35 liters  

Explanation:

hope this helps you

if wrong just correct me

After careful consideration your answer is...

Leucippus and Democritus

*Hope I helped*

~Alanna~

Answer:

The first theories of matter were put forward by Empedocles in 450 BC, he proposed that all matter was composed of four elements - Earth, air, fire and water. Later, Leucippus and Democritus suggested matter was made up of tiny indestructible particles continuously moving in empty space.

Explanation:

Van der Waals forces hold molecules together by inducing temporary dipoles that attract each other. That is option C

Van Der Waals forces are example of those intermolecular forces which are weaker than ionic and covalent bonds that exists between molecules.

Van Der Waals forces was postulated by a Dutch physicist known as Van Der Waals. He postulated the existence of weak, short-range forces of attraction, which are independent of normal bonding forces, between non-polar molecules. He came to this conclusion after studying the  of real gases at low temperatures and high pressures that:

This is how weak Van Der Waals forces are set up. Therefore, option C is CORRECT

Learn more here:

https://brainly.com/question/11457190

Answer:

10.77%

Explanation:

Molar mass of Cu = mass deposited/number of moles of Cu

Molar mass of Cu = 0.4391 g/6.238x10^-3 moles

Molar mass of Cu = 70.391 g/mol

%error = 70.391 g/mol - 63.546 g/mol/63.546 g/mol × 100

%error = 10.77%

Answer:

There is no difference between the two.

Explanation:

They both show the same volume. But, adding decimal places shows the least count of the instrument used and is more acceptable when recording values in scientific experiments

Answer:

by the own's formula energy sublevels are 2 the power of n or principal quantum number this means 2 the power of 4 equal to 32

Answer:

[tex]\boxed {\boxed {\sf D. \ 0.25 \ M}}[/tex]

Explanation:

Molarity is a measure of concentration in moles per liter.

[tex]molarity= \frac{moles \ of \ solute}{ liters \ of \ solution}[/tex]

The solution contains 0.75 moles of sodium chloride and has a volume of 3.0 liters.

Substitute these values into the formula.

[tex]molarity= \frac{ 0.75 \ mol \ NaCl}{3.0 \ L}[/tex]

[tex]molarity= 0.25 \ mol \ NaCl/L[/tex]

Molarity has the molar (M) as its unit. 1 molar is equal to 1 mole per liter.

[tex]molarity= 0.25 \ M \[/tex]

The molarity of the solution is 0.25 Molar and Choice D is correct.

Answer:

3

Explanation:

The electron shells are labelled as K,L,M,N,O,P, and Q or 1,2,3,4,5,6, and 7.

As we go from innermost shell outwards, this number denotes the number of subshell in the shell. Electrons in outer shells have higher average energy and travel farther from the nucleus than those in inner shells.

Hence, M shell contains s,p and d subshells.

Answer:

rip there isnt a photo

Explanation:

i do know a lot about cells tho lol

Answer:

In this equilibrium, the chemical system will shift to the right in order to produce more NH₃.

The equilibrium constant of a reaction is defined as:

"The ratio between equilibrium concentrations of products powered to their reaction quotient and  equilibrium concentration of reactants powered to thier reaction quotient".

The reaction quotient, Q, has the same algebraic expressions but use the actual concentrations of reactants.

To solve this question we need this additional information:

For this reaction, K = 6.0x10⁻² and the initial concentrations of the reactants are:

[N₂] = 4.0M; [NH₃] = 1.0x10⁻⁴M and [H₂] = 1.0x10⁻²M

Thus, for the reaction:

N₂ + 3H₂ ⇄ 2NH₃

The equilibrium constant, K, of this reaction, is defined as:

[tex]K = \frac{[NH_3]^2}{[H_2]^3[N_2]}[/tex]

Where [] are concentrations in equilibrium.

And Q, is:

[tex]Q = \frac{[NH_3]^2}{[H_2]^3[N_2]}[/tex]

Where actual concentrations are:

[NH₃] = 1.0x10⁻⁴M

[N₂] = 4.0M

[H₂] = 2.5x10⁻¹M

Replacing:

Q = 1.6x10⁻⁷

As Q < K,

The chemical system will shift to the right in order to produce more NH₃

Learn more about chemical equililbrium in:

https://brainly.com/question/24301138

Explanation:

Add water, Na2CO3 dissolves, filter, PbCO3 stays in the paper and dissolved Na2CO3 goes through as the solution. Dry the PbCO3 and you have the dry solid.

OR

Add water to dissolve then filter to obtain PbCo3 as you're residue and Na2Co3 as the filtrate. Dry the insoluble PbCo3 between filter papers and you obtain solid PbCo3

Answer:

0.0095 moles of acid were neutralized by the antiacid

Explanation:

The antiacid is a base that neutralize the acid in stomach. To find the moles of acid neutralized we need to find the moles of acid added initially. This acid is added in excess, then, the moles of NaOH added reacts to neutralize the moles of acid in excess. The difference between initial moles of HCl and moles of NaOH needed to titrate the excess = Moles of HCl that were neturalized by the antiacid as follows:

Moles HCl added:

42.00mL = 0.04200L * (0.250mol/L) = 0.0105 moles HCl

Moles NaOH to titrate the excess:

10.00mL = 0.01000L * (0.10mol/L) = 0.0010 moles NaOH = Moles HCl in excess.

Moles of acid that were neutralized:

0.0105 moles - 0.0010 moles =

Answer:

See Explanations

Explanation:

pH =-log[H₃O⁺] = -log[H⁺]

pOH = -log[OH⁻]

For weak acids [H⁺] = SqrRt(Ka·[Acid])

For weak bases [OH⁻] = SqrRt(Kb·[Base])

pH + pOH = 14

__________________________________________

A. Given 0.18M CH₃NH₂; Kb = (4.4 x 10⁻⁴)* => pH = 11.95

CH₃NH₂ + H₂O => CH₃NH₃OH ⇄ CH₃NH₃⁺ + OH⁻;

[OH⁻]  = SqrRt(Kb·[weak base]) = SqrRt(4.4 x 10⁻⁴ x 0.18)M = 8.97 x 10⁻³M

=> pOH = -log[OH⁻] = -log(8.93x10⁻³) = -(-2.05) = 2.05

=> pH = 14 - pOH = 14 - 2.05 = 11.95.

*Kb values for most ammonia derivatives in water can be found online by searching 'Kb-values for weak bases'. Kb-values for methyl amine and methylammonium chloride are both 4.4x10⁻⁴.

___________________________________________________

B. Given 0.18M CH₃NH₃Cl

In water ... CH₃NH₃Cl => CH₃NH₃⁺ + Cl⁻; Kb(CH₃NH₃Cl) = 4.4 x 10⁻⁴

Cl⁻ + H₂O => No Rxn (i.e.; no hydrolysis occurs) ... Cl⁻ does not react with H₂O.

Hydrolysis Reaction of Methylammonium Ion:

CH₃NH₃⁺ + H₂O => CH₃NH₄OH ⇄ CH₃NH₄⁺ + OH⁻

Ka' x Kb = Kw => Ka' = Kw/Kb = 10⁻¹⁴/4.4 x 10⁻⁴ = 2.27 x 10⁻¹¹                                   Ka' = [CH₃NH₄⁺][OH⁻]/[CH₃NH₄OH] = (x)(x)/(0.18M) = (x²/0.18M) = 2.27 x 10⁻¹¹ => x = [OH⁻] = SqrRt(2.27x10⁻¹¹ x 0.18)M = 2.02 x 10⁻⁶M => pOH = -log(2.02 x 10⁻⁶) = -(-5.69) = 5.69 => pH = 14 - pOH = 14 - 5.69 = 8.31.

*note => the general nature of halide interactions would increase acidity (lower pH) of the halogenated compound.

C. A mixture of 0.18M CH₃NH₂ and 0.18M CH₃NH₃Cl          

Mixture of 0.18M CH₃NH₂ + 0.18M CH₃NH₃Cl

In Water ...

=> 0.18M CH₃NH₃OH + 0.18M CH₃NH₃Cl

=> 0.18M CH₃NH₃⁺ + 0.1M OH⁻ + 0.18M CH₃NH₃⁺ + 0.18M Cl⁻

=> 0.36M CH₃NH₃⁺ + 0.18M OH⁻ + 0.18M Cl⁻

-----------------------------------------------------------

Ka'(CH₃NH₃⁺) x Kb(CH₃NH₂) = Kw => Ka'(CH₃NH₃⁺) = Kw/Kb(CH₃NH₂)

=> Ka'(CH₃NH₃⁺) = (10⁻¹⁴/4.4x10⁻⁴) = 2.27x10⁻¹¹

----------------------------------------------------------

From the 0.36M CH₃NH₃⁺

=>       CH₃NH₃⁺ + H₂O  ⇄ CH₃NH₄⁺ + OH⁻

C(eq)   0.36M        ----              x             x     (<= at equilibrium after mixing)

Ka'(CH₃NH₃⁺) = [CH₃NH₄⁺][OH⁻]/[CH₃NH₃⁺] = x²/(0.36M)

=> x = [OH⁻] = SqrRt(Ka'(CH₃NH₃⁺)·0.36M) = SqrRt(2.27x10⁻¹¹/0.36) = 0.0126M

=> Total [OH⁻] = 0.0126M + 0.18M = 0.1926M from hydrolysis process

=> final solution mix is therefore, 0.1926M in OH⁻ + 0.18M in Cl⁻

--------------------------------------------------------

∴pH = -log[H⁺] = -log(5.192x10⁻¹⁴) = -(-13.29) = 13.29 for solution mix

The acid and base dissociation constant and the 0.18 M of CH₃NH₂ and

CH₃NH₃Cl and the mixture give the following approximate values;

A. The pH value of the 0.18 M CH₃NH₂ is 11.93

B. The pH value of the 0.18 M CH₃NH₃Cl is 5.69

C. The pH value of the mixture is 10.644

A. 0.18 M CH₃NH₂

The solution is presented as follows;

CH₃NH₂ + H₂O → CH₃NH₃⁺ + OH⁻

Let x represent the number of moles of CH₃NH₃⁺ and OH⁻ produced, we

have;

The number of moles of CH₃NH₂ remaining = 0.18 - x

Which gives;

[tex]K_b = \mathbf{\dfrac{[CH_3NH_3^+][OH^-]}{[CH_3NH_2]}}[/tex]

[tex]K_b[/tex] for CH₃NH₂ = 4.167 × 10⁻⁴

Therefore;

[tex]4.167 \times 10^{-4} = \mathbf{\dfrac{x \times x}{0.18 - x}}[/tex]

4.167 × 10⁻⁴ × (0.18 - x) = x²

4.167 × 10⁻⁴ × (0.18 - x) - x² = 0

Which gives;

x = [OH⁻] = 8.455 × 10⁻³

pH = 14 + log[OH⁻]

Which gives;

pH = 14 + log(8.455 × 10⁻³) ≈ 11.93

B.  0.18 M CH₃NH₃Cl

The solution is presented as follows;

CH₃NH₃⁺ → CH₃NH₂ + H⁺

Let x represent the number of moles of CH₃NH₂ and H⁺ produced,

respectively, we have;

The number of moles of CH₃NH₃⁺ remaining = 0.18 - x

Which gives;

[tex]K_a = \mathbf{\dfrac{[CH_3NH_2][H^+]}{[CH_3NH_3^+]}}[/tex]

Kₐ for CH₃NH₃Cl = 2.27 × 10⁻¹¹

Therefore;

[tex]2.27\times 10^{-11} = \dfrac{x \times x}{0.18 - x}[/tex]

2.27 × 10⁻¹¹ × (0.18 - x) = x²

2.27 × 10⁻¹¹ × (0.18 - x) - x² = 0

Which gives;

x = [H⁺] ≈ 2.02 × 10⁻⁶

pH = -log[H⁺]

Which gives;

pH = -log(2.02 × 10⁻⁶) ≈ 5.69

C. For the mixture of 0.18 M CH₃NH₂ and 0.18 M of CH₃NH₃Cl, we have;

Based on the Henderson-Hasselbalch equation, we have;

[tex]pH = \mathbf{ pKa + log\dfrac{[Conjugate \ base]}{[acid ]}}[/tex]

Which gives;

[tex]pH = -log\left(2.27 \times 10^{-11} \right)+ log\dfrac{0.18}{0.18} \approx \underline{10.644}[/tex]

Learn more about Henderson-Hasselbalch equation here:

https://brainly.com/question/13651361

Question Completion with Options:

O coarse...few...rapid

O fine...few...slow

O fine...multiple...rapid

O coarse...few...slow

O fine...multiple...slow

Answer:

The choice that best completes the sentence is:

O coarse...few...slow

Explanation:

Transformations near the melting temperature develop coarse grains because few nucleation sites are formed and the rate of the grain growth is usually slow.  This is because of the process that starts with  recrystallization, recovery, and nucleation before growth can occur.  While recrystallization enables the grain to increase in size at high temperature, nucleation gives the grain the energy to irreversibly grow into larger-sized nucleus.

Answer:

The answer is "Option b".

Explanation:

H2 does have bond energy of 1, while Be2 has a covalent bond of zero. Be2 has eight electrons, each of which dwells in a distinct orbital. As just a result, four of them are linked molecular orbitals and two are antibonding molecular orbitals, respectively. As just a result, this molecule is unstable. This chemical orbital, with a bond order of 1, has just two electrons. As a result, it is a very solid substance. H2's bond length is higher than Be2's. Since it only has one electron, H2 is more stable than that of other compounds.

Answer:

c- ability to undergo chemical reaction

Answer:

Carbohydrates, proteins, and fats are biological macromolecules that are made up of chemical elements which are inherent to chemistry.

Chemistry explain how these macromolecules are bonded together at the molecular level and give an explanation for their behavior.

Explanation:

Answer:

NaoH= sodium hydroxide

Answer:

A. 3.04×10^-19J

Explanation:

Hope this will help you.

Answer:

[tex]E_2=999984KJ/mole[/tex]

Explanation:

From the question we are told that:

Factor [tex]dK=500[/tex]

Temperature [tex]T=37 C=310k[/tex]

Activation energy [tex]E=10^6kJ/mol[/tex]

Generally the Arhenius equation is mathematically given by

[tex]ln \frac{K_2}{K_1}=\frac{ E_1-E_2}{RT}[/tex]

Where

[tex]\frac{K_2}{K_1}=500[/tex]

[tex]ln 500=\frac{ 10^6-10^3-E_2}{8.314*310}[/tex]

[tex]E_2=999984KJ/mole[/tex]

The activation energy of the new reaction is 105.99 kJ/mol.

Using the Arrhenius equation;

ln(k2/k1) = -Ea2/RT2 +  Ea1/RT1

Now, from the information in the question;

k2/k1 = 500

Ea = ?

R = 8.314 JKmol-1

T2 = 37oC + 273 = 310 K

T1 = 37oC + 273 = 310 K

Substituting values;

ln (500) =- Ea2 + Ea1

6.2 = -Ea2 + 106 × 10^3 J

Ea = 106 × 10^3 J - 6.2

Ea = 105.99 × 10^3 J  or 105.99 kJ/mol

Learn more about activation energy: https://brainly.com/question/11334504

Answer:

As an example, mixing 1.0 mol of acetic acid with 0.5 mol of NaOH will result in a buffer solution with 0.5 mol of acetic acid and 0.5 mol of acetate. The acetate is created by the reaction of acetic acid and the strong base, hydroxide.

When HClO2 is mixed with the appropriate amount of HCl it would create a buffer solution. That is option B.

A buffer solution is the solution that resists a change in pH of a solution when acid or base is added because it is made up of weak acid and the conjugate base or weak base and the conjugate acid.

The methods that can be used to form a buffer solution include:

Although HCl is a strong acid, it can be converted to a weak acid through dilution with water. It is in this context that it can be used to form a buffer solution.

Learn more about buffer solution here:

https://brainly.com/question/26416276

Explanation:

1. boiling and melting point

2. electrical conductivity

3. Bond strength

4. bond length

A covalent bond consists of negative electrons that are shared in between atoms. Because of this bond, they possess and manifest physical abilities, including electrical pressure/conductivity and lower melting points compared to ionic compounds.