Answers
Answer:
Explanation:
This is a First Law of thermodynamics problem. We have to remember that the total energy available to a system is constant throughout the whole problem and that energy cannot be created or destroyed. So we need to find the total energy available right at the start. Well it just so happens that we are told that the total energy is 1000J and that it is all potential energy when the sphere is at rest and is 25 m off the ground. If the object isn't moving, all the energy is potential until it starts moving and the energy begins to convert from potential to kinetic a little bit at a time. The thing that we don't know is the mass of the shpere. Begin with the fact that the PE = 1000 (I'm going to se 2 sig fig's since there's only 1 in 1000). If
PE = 1000 and PE = mgh, then
1000 = m(9.8)(25) so
m = 4.1 kg
We also need the height at which this sphere has a PE of 600. Again, if
PE = 600 and PE = mgh, then
600 = (4.1)(9.8)h so
h = 15 Filling in the total energy equation now, using the fact that the total energy available to the system is 1000J:
TE = PE + KE and
1000 = (4.1)(9.8)(15) + [tex]\frac{1}{2}(4.1)v^2[/tex] and we are looking for v.
1000 = 6.0 × 10² + 2.1v² so
[tex]v=\sqrt{\frac{1000-6.0*10^2}{2.1} }[/tex] and
[tex]v=\sqrt{\frac{4.0*10^2}{2.1} }[/tex] gives us
v = 14 m/s
Related Questions
What do you mean by kinematics?
Answers
Explanation:
study of motion of an object ...plzz if anyone knies the correct meaning of it ..do comment
An inquisitive physics student and mountian climber climbs a 43.6 m cliff that overhangs a calm pool of water. He throws two stones vertically downward, 1.35 s apart and observes that they cause a single splash. The first stone has an initial velocity of 1.8 m/s. How long after release of the first stone do the two stones hit the water
Answers
Answer:
Explanation:
What we are basically looking for here is how long it takes the first stone to hit the water. We have everything we need to figure that out. We will use the equation
Δx = . Filling in, we will solve for t, the time is takes the first stone to hit the water (which is the same for both since they both hit the water at the same time):
which is a quadratic that we will have to factor. Get it into standard form, setting it equal to 0:
and factor to get that
t = 3.2 s and t = -2.8 s
Since time can't ever be negative, it takes 3.2 s for the stones to hit the water.
It was found that ice cream sales decrease significantly as the temperature outside decreases; a very strong relationship was found. What is the most likely correlation coefficient from this hypothetical study
Answers
Answer:
Value closest to 1
Explanation:
It is described from the scenario above that ice cream sales decreases as the outside temperature increases, hence showing a strong relationship between both variables (icream sales and temperature). The correlation Coefficient is a metric used in regression modeling to depict the strength of relationship between two variables, (The dependent and independent variables). Correlation Coefficient ranges from (-1 to +1). With values close to 1 or - 1. Also the positive and negative signs are used to show the type of relationship between the variables. If an increase in variable A leads to a decrease in variable B, then we have negative correlation (-) ; while an increase or decrease in both variables depicts a positive correlation. The most likely correlation Coefficient for the study above will be a positive value which is close to 1 since the relationship is described as strong.
Help me and I'll make u Brainliest and follow u
Answers
26. D. crushing the sugar cube and dissolving it in water.
27. A. atom
28. B. molecule
29. B. plum pudding model of Joseph John Thomson
30. B. He used cathode ray tubes which showed that all atoms contain tiny negatively charged subatomic particles or electrons.
31. D. protons and neutrons are relatively heavier than electrons.
Let's first consider the dynamics behind the motion in this video. After the student releases the wheel by cutting the cord, what forces are acting on the wheel
Answers
Answer:
Hello. You did not provide the video to which the question refers, however, given the context of your question, we can consider that the forces acting on the wheel are the weight of the wheel, the tension that this weight promotes on the rope and the normal force of the axle.
Explanation:
According to the context of the question, we can see that the wheel is being pulled by a rope. The weight of the wheel is the first force that acts on it, promoting resistance to the impulse that the rope promotes on the wheel. When this wheel is pulled by the rope, the weight of the wheel creates tension in the rope, which stretches and becomes tensioned in response to this force. However, this tension is also a force acting on the wheel, as is the normal force on the axis between these two elements.
18.How much momentum will a dump-bell of mass 10 kg transfer to the floor if it falls from a height.of 80 cm ? Take its downward acceleration to be 10 m s-2
Answers
Such asSuch ToSuch aSuch as طHow do I send the answer to the question?OkI don't know how to use this program
Answer:
MOMENTUM = 40kg ms-¹
hope it helps
have a nice day
Presence of _______- in retina gives us night vision that is help us to see in dim light.Required to answer. Single choice. Immersive Reader (1 Point) cornea retina lens rods
Answers
Answer: Rods
Explanation:
The rod cells in the retina are the reason we are able to see at night and in dim light. They exist on the edges of the retina which is why they are also very useful for the peripheral vision of a human.
Rod cells number over 90 million in the eyes and although very useful for seeing in dimmer light, they are not very useful for color vision which is why humans see less colors in the dark.
Question 23 of 23
Suppose a current flows through a copper wire. Which two things occur?
O A. The field is parallel to the direction of flow of the current.
B. An electric field forms around the wire.
OC. A magnetic field forms around the wire.
U
D. The field is perpendicular to the direction of flow of the current.
SUBM
Answers
Answer:
The field is parallel to the direction of flow of the current.
suppose the pilot starting again from rest opens the throttle part.way at constant acceleration the airboat then covers a distance of 60.0m in 10.0s find the net force action on the boat
Answers
Answer:
Acceleration is 1.2 m/s^2.
Explanation:
initial velocity, u = 0
distance, d = 60 m
time, t = 10 s
Let the acceleration is a.
use second equation of motion
[tex]s= u t +0.5 at^2\\\\60 = 0 + 0.5 \times a \times 10\times 10\\\\a = 1.2 m/s^2[/tex]
Now according to the Newton's second law
Force = mass x acceleration
Let the mass is m.
F = m x 1.2 = 1.2 m Newton
Suponga que la pelota de la figura se proyecta desde una altura de 35.0 m sobre el suelo y se le imprime una velocidad horizontal inicial de 8.25 m/s. a) ¿Cuánto tiempo tardará la pelota en golpear el suelo? b) ¿A qué distancia del edificio tocará el suelo la pelota?
Answers
Answer:
Explanation:
qoe39rwecwurbq;7edfqbsi
How does work affect energy between objects so it can cause a change in the form of energy?
A. Work transfers energy.
B. Work changes energy.
C. Work increases energy.
D. Work decreases energy.
Answers
What is photosynthesis??
Answers
Explanation:
The process in which green plants prepare their food in their body by using carbon dioxide and water in the presence of sunlight is called photosynthesis.hope it is helpful to you
Hey there!
Photosynthesis is the reaction that converts light energy to chemical energy in sugar and carbohydrates. Humans can't eat sunlight, so we eat plants. Plants convert the energy in the sunlight into chemical energy using chlorophyll. Chlorophyll is a molecule produced by plants, algae, and cyanobacteria, which aids in the conversion of light energy into chemical bonds. It is the green pigment found in the chloroplasts of higher plants. They are a part of our ecosystem, and they are lower on the food chain.
Hope this helps!
Have a great day! :)
The core of transformer is laminated.......
a.to reduce the loss of energy in the form of heat across the transformer
b.to reduce the voltage of AC
c.to decrease the voltage of AC
d. to change the maginetic flux
Answers
Answer:
A. to reduce the loss of energy in the form of heat across the transformer
Explanation:
The core of the transformer is laminated to minimise the energy as they interfere with the efficient transfer of energy from the primary coil to the secondary one. The eddy currents cause energy to be lost from the transformer as they heat up the core - meaning that electrical energy is being wasted as heat.
what is a weed (question answer)
Answers
Answer:
A weed is a plant considered undesirable in a particular situation, "a plant in the wrong place". Examples commonly are plants unwanted in human-controlled settings, such as farm fields, gardens, lawns, and parks
A 6 m/s vector pointing North is added to a 2 m/s vector pointing East. What are the magnitude and direction of the resultant?
Answers
Answer:
A + B = C Ax = 2 Ay = 0 Bx = 0 By = 6
Ax + Bx = Cx = 2
Ay + By = Cy = 6
C = (2^2 + 6^2)^1/2 = 6.32
Tan Cy / Cx = 6 / 2 = 3
Cy at 71.6 deg
State Newton’s second law of motion. Derive this law mathematically. A 1000 kg vehicle moving with a speed of 20m/s is brought to rest in a distance of 50 metres. Find the acceleration and calculate the force acting on the vehicle.
Answers
Answer:
-4000 N
Explanation:
newton second law F=ma
m=1000kg
vi=20m/s
vf=0
d=50 m
vf^2=vi^2+2ad
0=20^2+2a×50
100 a= -400
a= -4 m/S2
F=ma = 1000×-4 = -4000 N
Based on what you have read provide two positives and two negatives the Suarez family would face if they switch to organic farming
Answers
Hi, you did not enter the text about the Suarez family, which makes it impossible for this question to be answered accurately. However, from the context of your question, it is possible to see that you want to know two positive and negative points that the Suarez family would observe when starting a planting of organic agriculture.
Among the negative points, we can say that organic agriculture has a high cost, as the techniques used in it require a greater number of resources, which can make not only the service more expensive, but also the product. A second negative point is that the techniques used in organic agriculture are more difficult than the techniques used in conventional agriculture, since all management of organic crops must be carried out without the application of chemical products.
Among the positive points, we can say that the growing number of consumers of organic products can increase the profit that the family will have from the sale of these products. In addition, the family will have healthier, less polluted and more productive land.
Answer:
Sample response: Organic farming would have higher costs, and would be more complex than conventional farming. However, the Suarez family could charge a higher price for organic produce. This type of farming also would be better for the land.
Explanation:
An electrostatic paint sprayer has a 0.17 m-diameter metal sphere at a potential of 25.0 kV that repels charged paint droplets onto the object to be painted, which is grounded (electric potential of 0).
Answers
Answer:
[tex]q=0.236uC[/tex]
Explanation:
From the question we are told that:
Diameter [tex]d=0.17m[/tex]
Radius [tex]r=0.17/2=>0.085[/tex]
Potential [tex]E=25.0kV[/tex]
Generally the equation for Potential on spere is mathematically given by
[tex]E=\frac{1}{4 \pi e_0}*\frac{q}{r}[/tex]
Therefore
[tex]q=\frac{25*10^3*0.085}{\frac{1}{4 \pi e_0}}[/tex]
Where
[tex]\frac{1}{4 \pi e_0}=9*10^9[/tex]
Therefore
[tex]q=\frac{25*10^3*0.085}{(9*10^9}}[/tex]
[tex]q=0.236uC[/tex]
a)Watt (W) is a derived unit.
b)The atomic clock is suitable for measuring time.
c)There is fluctuation in time measured by a pendulum clock.
d)The weight of an object is more at pole and less at equator of the earth.
e)The weight of an object on the moon is about one-sixth the weight it would have on the earth.
f)In average, the weight of 1 kilogram mass on the earth surface is 9.8 N.
please answer all questions
Answers
Answer:
a) Watt is a derived unit because it's not a “base unit.”
b) The atomic clock is suitable for measuring time because natural atomic oscillations happen at a higher frequency and as a result they are more stable.
c) There is fluctuation in time measured by a pendulum clock because the pendulum rod changes in length slightly with changes in temperature, causing changes in the rate of the clock. An increase in temperature causes the rod to expand, making the pendulum longer, so its period increases and the clock loses time.
D) The weight of an object is more at pole and less at equator of the earth because the distance of the pole is less than the distance of the equator from the centre of the earth.
e) The weight of an object on the moon is about one-sixth the weight it would have on the earth because the moon's gravitation force is determined by the mass and the size of the moon. Hence, the weight of an object on the moon is 1/6th its weight on the earth.
A car at a position 150 km [W] of Toronto travels to a position 400 km [W] of
Toronto. The total displacement of the car is:
Answers
Answer:
The total displacement of the car is 250 km.
Explanation:
Given that,
A car at a position 150 km [W] of Toronto travels to a position 400 km [W] of Toronto.
Total displacement = final position - initial position
= 400 km - 150 km
= 250 km
So, the total displacement of the car is 250 km.
A Bullet Off mass 100 gm is fired From A Gun Off mass 5 Kg. If the backward velocity of the gun's 5 m / s, what is forward velocity of the bullet?
Answers
Answer:
250 m/s
Explanation:
The mass of the bullet, m₁ = 100 g = 0.1 kg
The mass of the gun, m₂ = 5 kg
The backward velocity of the gun, v₂ = -5 m/s
Given that the momentum is conserved, we have;
The total initial momentum = The total final momentum
The gun and the bullet are at rest, therefore, we have;
The initial momentum = 0
The total final momentum = m₁·v₁ + m₂·v₂
Where;
v₁ = The forward velocity of the bullet
Therefore, we get;
m₁·v₁ + m₂·v₂ = 0
0.1 kg × v₁ + 5 kg × (-5 m/s) = 0
0.1 kg × v₁ = 5 kg × 5 m/s
v₁ = (5 kg × 5 m/s)/(0.1 kg) = 250 m/s
The forward velocity of the bullet, v₁ = 250 m/s
Tony walks at an average speed of 70 m/min from his home to
school. If the distance between his home and the school is
2100 m, how much time does it take for Tony to walk to
school?
min
Answers
Answer:
The answer is 30 min
Explanation:
t = s/v
v = 70 m/min, s = 2100 m
t = 2100/70 = 30 min.
Hope it helps you! ＼(^ᴥ^)／
A body weighing 50 N is placed on a wooden table. How much force is required to set it into motion? Coefficient of friction between the table and the body is 0.3.
Answers
If the coefficient of static friction is 0.3, then the minimum force required to get it moving is equal in magnitude to the maximum static friction that can hold the body in place.
By Newton's second law,
• the net vertical force is 0, since the body doesn't move up or down, and in particular
∑ F = n - mg = n - 50 N = 0 ==> n = 50 N
where n is the magnitude of the normal force; and
• the net horizontal force is also 0, since static friction keeps the body from moving, with
∑ F = F' - f = F' - µn = F' - 0.3 (50 N) = 0 ==> F' = 15 N
where F' is the magnitude of the applied force, f is the magnitude of static friction, and µ is the friction coefficient.
Every living thing gives off thermal energy in the form of which type of
electromagnetic waves?
O A Visible light
B. Gamma rays
C. infrared
O D. Ultraviolet
Answers
Every living things gives off thermal energy in the form electromagnetic waves. The electromagnetic wave releasing off is infrared radiation. Hence, option C is correct. .
What are electromagnetic waves ?Electromagnetic waves are associated with a combined electric field and magnetic field. They can pass through vacuum as well as through a medium. Unlike mechanical waves, all the electromagnetic waves are transverse waves.
The oscillation of particles is in the direction perpendicular to the wave propagation. There are 7 types of radiations in the electromagnetic spectrum. The light we see is called visible light.
The infrared waves are located in between microwaves and visible light. Every living thing gives off thermal energy in the form of infrared radiation. Hence, option C is correct.
Find more on infrared waves:
https://brainly.com/question/30309627
#SPJ2
que es la energia electrica
Answers
Answer:
:) :) :) :) :) :) :) :) :)
Explanation:
:) :) :) .......
Why would an airplane flying at 10,000 meters above the ground have more gravitational potential
energy than the same airplane flying at 1,000 meters above the ground?
Answers
Answer:
The gravitational potential energy (gpe) possessed by an object or body is directly proportional to the height of the object or body.
Explanation:
Gravitational potential energy (GPE) is an energy possessed by an object or body due to its position above the earth.
Mathematically, gravitational potential energy is given by the formula;
G.P.E = mgh
Where;
G.P.E represents potential energy measured in Joules.
m represents the mass of an object.
g represents acceleration due to gravity measured in meters per seconds square.
h represents the height measured in meters.
Generally, the gravitational potential energy (gpe) of an object or body is directly proportional to the height of the object or body. Thus, the gravitational potential energy of a body increases as the height of the body increases.
In conclusion, an object with a higher height would have a higher gravitational potential energy.
A pair of forces with equal magnitude, opposite directions, and different lines of action is called a "couple." When a couple acts on a rigid object, the couple produces a torque that does not depend on the location of the axis. The drawing shows a couple acting on a tire wrench, each force being perpendicular to the wrench. Determine an expression for the torque produced by the couple when the axis is perpendicular to the tire and passes through the following. Express your answers in terms of the magnitude F of the force and the length L of the wrench.
Answers
The drawing shows the couple acting on a tire wrench is missing and so i have attached it.
We are to find an expression for the torque when the axis is perpendicular to the tire and passes through the points A, B & C
Answer:
Point A: τ = Fl
Point B: τ = 0
Point C: - Fl
Explanation:
Formula for torque is;
τ = F × d
Where;
F is perpendicular force
d is distance.
Thus;
> At point A, it means we are taking torque about point A and so we have;
τ = (-F × 0) + (F × L)
τ = Fl
> At point B, it means we are taking torque about point B and so we have;
τ = (-F × L/2) + (F × L/2)
τ = -(FL/2) + (FL/2)
τ = 0
> At point C, it means we are taking torque about point C and so we have;
τ = (-F × L) + (F × 0)
τ = -FL
If 6000 J of heat is added to 200 gm of water at 25° C. What will be its final
temperature?
Answers
Answer:
T₂ = 305.17 K
Explanation:
Given that,
Heat, Q = 6000 J
Mass, m = 200 gram
Initial temperature, T₁ = 25° C
We need to find its final temperature. Let it is T₂.
We know that,
[tex]Q=mc\Delta T[/tex]
Where
c is the specific heat of water, c = 4.18 J/g°C
So,
[tex]6000=200\times 4.18\times (T_2-298)\\\\\dfrac{6000}{200\times 4.18}=(T_2-298)\\\\7.17=(T_2-298)\\\\7.17+298=T_2\\\\T_2=305.17\ K[/tex]
So, the final temperature is equal to 305.17 K.
Put the steps of the scientific method in order
Answers
step 2, do research
step 3, make a hypothesis
step 4, test your hypothesis with an experiment
step 5, analyze your data
step 6, make a conclusion
You pull your little sister across a flat snowy field on a sled. Your sister plus the sled have a mass of . The rope is at an angle of 45 degrees to the ground. As you pull with a force of , the sled travels a distance of . How much work do you do
Answers
Answer:
W = 0.7071 F x, W = 35.355 J
Explanation:
Work is defined
W = F. d
bold indicates vectors,
W = F d cos θ
where the angle is between force and displacement.
As the system runs on snow, the friction force is negligible, therefore
W = F x cos 45
W = 0.7071 F x
Unfortunately the values of the force and the distance do not appear, suppose that the force is F = 10 N and the distance x = 5m
W = 0.7071 10 5
W = 35.355 J
Work is positive because force and displacement go in the same direction
