Which list BEST identifies how the arrows should be arranged around the paper leaf in the model to represent the movement of matter and flow of energy during photosynthesis? A. Point into Leaf: sugars, oxygen (02), Point away from leaf: carbon dioxide(CO2), water(H2O) B. Point into Leaf: sugars, sunlight, Point away from leaf: carbon dioxide(CO2), oxygen (02), water(H2O) C. Point into Leaf: water(H2O), sunlight, Point away from leaf: carbon dioxide(CO2), sugars, oxygen (02) D. Point into Leaf: water(H2O), carbon dioxide(CO2) sunlight, Point away from leaf: sugars, oxygen (02
Answer:
D. Point into Leaf: water(H₂O), carbon dioxide (CO₂) sunlight, Point away from leaf: Sugars, oxygen (O₂)
Explanation:
Photosynthesis is the process used in the production of chemical energy in the form of energy containing organic compounds and oxygen from atmospheric carbon dioxide and liquid water enabled with the energy captured from light (mainly Sunlight) by the chlorophyll in green plants and other organisms
The basic chemical reaction involved in a photosynthesis reaction is presented as follows;
[tex]{}[/tex] Sunlight
[tex]{}[/tex] ↓
[tex]{}[/tex] CO₂ + H₂O (l) → C₆H₁₂O₆ + O₂
Carbon dioxide [tex]{}[/tex] Water Glucose Oxygen
How many Carbon Atoms are there on the PRODUCT SIDE
Answer: There are 6 carbon atoms on the product side.
Explanation:
The given reaction equation is as follows.
[tex]6CO_{2} + 6H_{2}O \rightarrow C_{6}H_{12}O_{6} + 6O_{2}[/tex]
Species present on the left side of an arrow in a chemical equation depicts the reactants.
Species present on the right side of an arrow in a chemical equation depicts the products.
Hence, products in the given reaction equation are [tex]C_{6}H_{12}O_{6}[/tex] and [tex]6O_{2}[/tex].
Therefore, there are 6 carbon atoms present on the product side.
Thus, we can conclude that there are 6 carbon atoms on the product side.
Michael is studying the factors that affect corrosion of metals. He wants to test the effect that different concentrations of an acid will have on the corrosion of a metal. As he sets up and completes his experiment, which of the following experimental designs would be most likely to help him answer his question? A. Allow several metal samples to soak in different amounts of acid of a single concentration and then measure the amount of corrosion on each. B. Prepare solutions of different acid concentrations, measure 50 milliliters of each into different beakers, and place metal samples of different types but of the same mass into the beakers. C. After allowing several small metal sheets to be exposed to different acid concentrations, measure the surface area of each that is corroded. D. After allowing a small metal sheet to be exposed to one acid concentration, place it in different acid concentrations, then measure the surface area that is corroded.
Answer:
B. Prepare solutions of different acid concentrations, measure 50 milliliters of each into different beakers, and place metal samples of different types but of the same mass into the beakers.
Explanation:
Since Michael is studying the factors that affect corrosion of metals, and wants to test the effect that different concentrations of an acid will have on the corrosion of a metal, using different acid concentrations of the same volume on different metal samples of the same size would give a much better than all the other options because, a standard volume of acid is used and also a standard mass of metal is used. So, the effect can be measured quantitatively since we have the same quantity of sample.
So, option B is the answer
Mass x height x gravity is the formula to calculate:
Answer:
Potential energy
Explanation:
[tex]p.e = mgh[/tex]
what are alpha particles??
Answer:
a helium nucleus emitted by some radioactive substances, originally regarded as a ray.
Explanation:
Answer:
They're charged particles Identical to the Helium Nucleus
Having 2 protons and 2neutrons and having a Mass of 4.
They're Heavy and slow(speed)In comparison to Beta particles and gamma rays
Usually Emitted from nucleus of radioactive nuclides during decay
Use the earthquake distribution map and what you know about boundaries to answer the question
Barbara is conducting an experiment to observe heat flow. She places one piece of metal in a freezer at -18 degrees Celsius (°C) and a second piece of metal in an oven at 200 °C. After 2 hours, she takes the metal pieces out of the freezer and oven and places them both in the same beaker of boiling water for two minutes. Which of the following best describes how some of the heat will initially move in this system?
Heat will flow from the frozen metal into the hot metal.
Heat will flow from the boiling water into the hot metal.
Heat will flow from the boiling water into the frozen metal.
Heat will flow from the frozen metal into the boiling water.
Answer: The correct answer is heat will flow from the boiling water into the frozen metal.
Explanation:
According to the law of conservation of energy, energy cannot be destroyed nor created but it can be transformed from 1 form to another form.
There are 3 processes of heat transfer:
Conduction: This type of heat transfer occurs when there is direct contact between the two objects.Convection: This type of heat transfer occurs when there is a movement of fluid (liquid or gas) due to the movement of hot layers to the top and cold layers to the bottom which leads to convection currents. Radiation: This type of heat transfer occurs when there is a direct transfer of energy through space.The heat moves from a hot surface to a cold surface to maintain equilibrium.
We are given:
A metal is placed in a freezer (cold object) and another metal is placed in an oven (hot object) and then both the metals are placed in boiling water.
Initially, the heat will flow from the boiling water (hot object) into the frozen metal (cold object) to maintain equilibrium
Hence, the correct answer is heat will flow from the boiling water into the frozen metal.
Si se hace reaccionar CH3CH3 (etano) con cloro, en presencia de luz ultravioleta, los productos obtenidos en este paso son
Answer:
La reacción de etano, CH₃CH₃ y cloro, Cl₂ en presencia de luz solar se conoce como reacción de halogenación.
Los radicales de cloro se forman cuando el cloro se expone a la luz solar a continuación;
Cl₂ → 2Cl *
Se forma un radical etano cuando el etano, C₂H₆ reacciona con un radical libre de cloro, Cl *, como sigue;
C₂H₆ + Cl → C₂H₅ * + HCl
Se forma un producto halogenado cuando un radical libre de etano reacciona con una molécula de cloro como sigue;
C₂H₅ * + Cl₂ → C₂H₅Cl + Cl *
Un producto halogenado puede reaccionar además con un radical libre para producir como sigue;
C₂H₅Cl + Cl * → C₂H₅Cl₂
Explanation:
Write the net ionic equation. Don't worry about identifying the state of matter. 2 NH4Cl (aq) + 1 Mg(OH)=2NH3 (g) + 2H2O (l) + 1 MgCl2 (aq)
Answer:
2NH4^+(aq) + 2OH^-(aq) ----->2NH3(g) + 2H2O(l)
Explanation:
Molecular balanced reaction equation;
2NH4Cl (aq) + Mg(OH)2---->2NH3 (g) + 2H2O (l) + MgCl2 (aq)
Complete ionic reaction equation;
2NH4^+(aq) + 2Cl^-(aq) + Mg^2+(aq) + 2OH^-(aq) ----->2NH3(g) + 2H2O(l) + Mg^2+(aq) + 2Cl^-(aq)
Net Ionic reaction equation;
2NH4^+(aq) + 2OH^-(aq) ----->2NH3(g) + 2H2O(l)
Given 7 moles of nitrogen gas, how many moles of ammonia can you make?
Explanation:
just use the molar ratios to figure it out. Notice, you have to balance the chemical equation.
What is the percent composition of phosphorus in the compound P3CI8
Answer:
24.68%
Explanation:
Molar mass of phosphorous / molar mass of P3Cl8
= 3 x 30.97 / (3 x 30.97) + (8 x 35.45)
= 92.91/376.51 x 100
= 24.676%
=24.68% (2dp)
What makes radioisotopes useful for dating objects?
O A. They have unique emission spectra.
O B. They decay at a predictable rate.
C. Their decay products are easy to detect.
O D. They all have extremely long half-lives.
Answer:A
Explanation:
Option D. They all have extremely long half-lives makes radioisotopes useful for dating objects.
What are radioisotopes?Radioisotopes exist as radioactive isotopes of an element. They can also be described as atoms that include an unstable combination of neutrons and protons, or surplus energy in their nucleus.
A radionuclide exists as a nuclide that contains excess nuclear energy, causing it unstable. This excess energy can be utilized in one of three methods: emitted from the nucleus as gamma radiation; assigned to one of its electrons to terminate it as a conversion electron; or utilized to create and emit a unique particle from the nucleus.
Radioactive isotopes of radium, thorium, and uranium, for example, exist found naturally in rocks and soil. Uranium and thorium also happen in trace amounts in water. Radon, induced by the radioactive decay of radium, stands present in the air.
Hence, Option D. They all have extremely long half-lives makes radioisotopes useful for dating objects.
To learn more about radioisotopes refer to:
https://brainly.com/question/18640165
#SPJ2
when monomers are joined together, what do they form?
The monomers combine with each other via covalent bonds to form larger molecules known as polymers. In doing so, monomers release water molecules as byproducts.
what type of volcanic eruption produce ash fall?
Explanation:
I would say explosive eruptions caused by decompression of the dissolved gases in the magma. The Mt Pinatubo eruption is an example of a massive ash fall that eventually closed down an American base in the Philippines. And just recently the island of St. Vincent suffered major damage from ash fall due to a volcanic eruption.
Which substance would you expect to dissolve most rapidly in 100 mL water?
A
0.4 g granulated sugar
B
0.2 g powdered sugar
C
0.4 g powdered sugar
D
0.2 g sugar cube
Answer:
b because it is just 0.2 g and powdered sugar has more contact surface than granulated sugar or sugar cube
The solubility can be given as the amount of solute that can be dissolved in the 100 ml of the solution. The most rapidly dissolved sugar in water is 0.2 gram powdered sugar.
What is a contact surface?The contact surface can be given as the area of the compound that is in direct contact with the solution.
The solubility of the compound is found more in the solute with increased surface area.
The surface area of powdered sugar will be maximum, as more granules of the sugar will be in contact with the water than the cube or the granulated sugar.
Thus, the most rapid dissolution in water is found with 0.2 grams of powdered sugar. Thus, option B is correct.
Learn more about solubility, here:
https://brainly.com/question/13620168
How do hydrogels retain water?
Answer:
The combination of the polymer opening up and the water molecules sticking to it make a solution of the hydrogel get thicker and more viscous (sticky). Disposable nappies make use of the ability of hydrogels to take up and retain water, even under pressure.
Explanation:
Help me with this this is something i dont know and its not on here please help meeeeeee
Answer:
it would be option A
Explanation:
This is becuase if you look at the chart you can see tyhat the group of rats that got feed to vitamans did gain more wati then the ones on the normal diet.
The metal aluminum coils in an air conditioner conduct thermal energy from inside the house and release it outside the house. What can be said about the coils when they are accepting the heat inside the house?
Answer:
c
Explanation:
Answer:
B: They must be cooler than the air inside the house.
Explanation:
I got it right on edge!
In which situation would hydrogen bonding be present?
Answer:
Water ?
Need more info.
Water is [tex]H_{2}[/tex]O
Explanation:
Answer:
Hydrogen bonding occurs when a protonic H is bonded to F, O or N and there must be a lone pair of electron in the F, O or N atom.
1. Which of the following combinations correctly represents the process of
photosynthesis?
a) Carbon Dioxide + Water + solar energy - Glucose + Oxygen
b) Carbon Dioxide + Water - Glucose + Oxygen + solar energy
c) Glucose + Oxygen Carbon Dioxide + Water + energy
d) Glucose + Oxygen + energy +
Carbon Dioxide + Water
Answer:
A
Explanation:
Answer:
I think It should be option A. It would have been B but, solar energy is not giving out, it's taken in
1. Ecosystems are composed of biotic and abiotic factors. Which of the following
represent only an abiotic factor in an ecosystem that could have an effect on
the ecosystem?
a. rivers with more dams
b. wood being taken for manufacturing
c. waste not being used by fungi
d. decomposers only taking nutrients from plants
Answer:
wood being taken for manufacturing
please explain what a ecosystem is.
Explanation:
An ecosystem includes the environment, living and non-living things and how they interact with each other.
For example, in a Reef ecosystem there
are marine plants and animals that depend on each other and their surrounding to survive.
copper +sulfur + oxygen =
What important points do you need to remember about combustion?
Explanation:
A substance burning in the presence of oxygen and leads to the formation of heat and light is called combustion.
Some important points about combustion are as follows:
Fuel should be present for burning.Air should be present for the supply of oxygen.There should be heat (or ignition temperature) to initiate the chemical reaction.por que el petroleo es un no recurso renovable
Answer:
Por ejemplo, el petróleo o el carbón son ejemplos de recursos no renovables porque, aunque se forman mediante un proceso natural, este necesita demasiado tiempo. ... Esos combustibles fósiles provienen de materia orgánica, pero tardan cientos de miles de años en producirse.
what is large intestine
Explanation:
The large intestine (colon or large bowel) is about 5 feet long and about 3 inches in diameter. The colon absorbs water from wastes, creating stool. As stool enters the rectum, nerves there create the urge to defecate.hope it helps.stay safe healthy and happy!!!Which equation represents the correct net ionic equation for the reaction between Ca(OH)2 and H2SO4?
Upper H superscript plus, plus upper O upper H superscript minus right arrow upper H subscript 2 upper O.
2 upper H superscript plus, plus 2 upper O upper H superscript minus right arrow upper H subscript 2 upper O.
Upper C a superscript 2 plus, plus 2 upper O upper H superscript minus, plus upper S upper O subscript 4 superscript 2 minus right arrow upper C a superscript 2 plus, plus upper S upper O subscript 4 superscript 2 minus, plus 2 upper H subscript 2 upper O.
Upper C a (upper O upper H) subscript 2 plus upper H subscript 2 upper S upper O subscript 4 right arrow upper C a upper S upper O subscript 4 plus 2 upper H subscript 2 upper O.
Answer: The correct net ionic equation for the reaction is [tex]2H^{+}(aq)+2OH^{-}(aq)\rightarrow 2H_2O(l)[/tex]
Explanation:
Net ionic equation is defined as the equations in which spectator ions are not included.
Spectator ions are the ones that are present equally on the reactant and product sides. They do not participate in the reaction.
The balanced molecular equation is:
[tex]Ca(OH)_2(aq)+H_2SO_4(aq)\rightarrow CaSO_4(aq)+2H_2O(l)[/tex]
The complete ionic equation follows:
[tex]Ca^{2+}(aq)+2OH^-(aq)+2H^+(aq)+SO_4^{2-}(aq)\rightarrow 2Ca^{2+}(aq)+SO_4^{2-}(aq)+H_2O(l)[/tex]
As calcium and sulfate ions are present on both sides of the reaction. Thus, they are considered spectator ions.
The net ionic equation follows:
[tex]2H^{+}(aq)+2OH^{-}(aq)\rightarrow 2H_2O(l)[/tex]
Hence, the correct net ionic equation for the reaction is [tex]2H^{+}(aq)+2OH^{-}(aq)\rightarrow 2H_2O(l)[/tex]
Answer:
B. no reaction
Explanation:
What is the number of Co2 in a 220 gram
Does a reaction involving an acid and a base have to take place in a water environment? Justify your answer.
Answer:
Yes, because the water solvent is better
Explanation:
Hope this helps
Fe2O3 (s) + CO (g) -> Fe(s) + CO2 (g) (unbalanced)
1.Calculate the number of grams of CO that can react with 0.150kg of Fe2O3
2. Calculate the number of grams of Fe and the number of grams of CO2 formed
when 0.150 kg of Fe2O3 reacts
Answer:
1. 78.9g of CO
2. 104.9g Fe and 124.0g CO2
Explanation:
Based on the balanced reaction:
Fe2O3 (s) + 3CO (g) -> 2Fe(s) + 3CO2 (g)
1 mole of Fe2O3 reacts with 3 moles of CO to produce 2 moles of Fe and 3 of CO2
1. The moles of 0.150kg = 150g of Fe2O3 -Molar mass: are:
150g * (1mol / 159.69g) = 0.9393 moles Fe2O3
Moles CO:
0.9393 moles Fe2O3 * (3mol CO / 1mol Fe2O3) = 2.818 moles CO
Mass CO -Molar mass: 28.01g/mol-:
2.818 moles CO * (28.01g/mol) = 78.9g of CO
2. The moles of Fe produced are:
0.9393 moles Fe2O3 * (2mol Fe / 1mol Fe2O3) = 1.8786 moles Fe
Mass Fe -Molar mass: 55.845g/mol-:
1.8786 moles Fe * (55.845g/mol) = 104.9g Fe
The moles of CO2 produced are:
0.9393 moles Fe2O3 * (3mol CO2 / 1mol Fe2O3) = 2.818moles CO2
Mass CO2 -Molar mass: 44.01g/mol-:
2.818moles CO2 * (44.01g/mol) = 124.0g CO2
