Please help me thanks!?!?!?

Answer:

Acidic solution used to clean a crucible

Explanation:

This liquid dissolves alcoholic solvents such as crucible, that is why it was selected as the ideal for cleaning.

Although it would be ideal to know in detail which chemical compound is the one you want to clean so that the cleaning technique has better effectiveness.

WASTE CONTAINER refers to the solvent used to rinse chemicals out of a beaker, and it also refers to the acid solution used to clean a crucible. Water used to rinse the detergent out of a flask refer to the SINK.

In conclusion, WASTE CONTAINER refers to the solvent used to rinse chemicals out of a beaker, and it also refers to the acid solution used to clean a crucible. Water used to rinse the detergent out of a flask refer to the SINK.

Learn more in:

https://brainly.com/question/10281181

Answer:

 (C) Mass of KCl(s), mass of H20, initial temperature of the water, and final temperature of the solution

Explanation:

molar enthalpy of solution of KCl(s) is heat evolved or absorbed when one mole of KCl is dissolved in water to make pure solution . The heat evolved or absorbed can be calculated by the following relation.

Q = msΔt where m is mass of solution or water , s is specific heat and Δt is change in temperature of water .

So data required is mass of water or solution , initial and final temperature of solution , specific heat of water is known .

Now to know molar heat , we require mass of solute or KCl dissolved to know heat heat absorbed or evolved by dissolution of one mole of solute .

The correct option is option C.

To determine the molar enthalpy of the solution of [tex]Kcl(s)[/tex] is pure [tex]H_2O(l)[/tex]

We need to know that the,

Learn More:https://brainly.com/question/25758173

Answer:

An ecosystem is a community or group of living organisms that live in and interact with each other in a specific environment.

Explanation:

That's the most straight forward explanation I could come up with

Answer:

Molecules/State

Explanation:

We know from the kinetic molecular theory that matter is made up of molecules. These molecules are in constant motion at various velocities and energies.

The total thermal energy refers to the total kinetic energies of these particles. It depends on the temperature of the system, the energies of the molecules present in the material and the arrangement of the object's molecules (states of matter).

Answer:

4C₈H₄OH +  35O₂  →  32CO₂   +   10H₂O  

Explanation:

The unbalanced reaction expression is given as:

         C₈H₄OH +  O₂  →  CO₂   +   H₂O  

To solve this problem, we use a mathematical approach.

     aC₈H₄OH +  bO₂  →  cCO₂   +   dH₂O

Conserving C: 8a  = c

                    H:  5a  = 2d

                    O: a + 2b  = 2c + d

Let a  = 1, c  = 8, d  = [tex]\frac{5}{2}[/tex]  , b  = 35

   4C₈H₄OH +  35O₂  →  32CO₂   +   10H₂O  

Explanation:

Molar mass of AlCl3 = 133.34g/mol

Moles of AlCl3 used

= 20.0g / (133.34g/mol) = 0.150mol

Mole Ratio of AlCl3 to Cl2 = 2 : 3,

Moles of Cl2 produced

= 0.150mol * (3/2) = 0.225mol

We know that 1 mole of any gas has

6.023 * 10²³ molecules.

Hence, number of molecules in Cl2

= 0.225mol * (6.023 * 10²³/mol)

= 1.35 * 10²³ molecules. (C)

Answer:

116.78 grams.

Explanation:

1 mol of Strontium (Sr) = 87.62 grams

1.38 mol of Strontium = x

Cross Multiply

1 * x = 1.38 * 87.62

x = 116.78  grams

Answer:

The answer is "A"

Explanation:

Please find the complete question in the attachment file.

[tex]\to R(s)= \frac{As}{K+s}[/tex]

when the s in the approach, that is infinity R(s) tends

[tex]\to \frac{A}{\frac{K}{s}+1} \\\\ \to\frac{A}{0+1} \\\\ \to\frac{A}{1} \\\\ \to A[/tex]

An SDOF system is one whose motion is governed by a single, second-order differential equation. Only two variables, position and velocity are needed to describe the trajectory of the system. Many structures can be idealized as single degree-of-freedom systems.

The LDAP Data Interchange Format is a standard plain text data interchange format for representing LDAP directory content and update requests. LDIF conveys directory content as a set of records, one record for each object.

Answer:

1.17 M

Explanation:

Step 1: Write the balanced equation

N₂ + 3 H₂ ⇒ 2 NH₃

Step 2: Calculate the rate of disappearance of H₂

We will use the following expression.

rH₂ = - Δ[H₂]/t = - (0.25 M - 0.50 M)/44 s = 0.0057 M/s

Step 3: Calculate the rate of disappearance of N₂

The molar ratio of N₂ to H₂ is 1:3.

0.0057 mol H₂/L.s × 1 mol N₂/3 mol H₂ = 0.0019 mol N₂/L.s

Step 4: Calculate the final concentration of N₂

We will use the following expression.

[N₂] = [N₂]₀ - rN₂ × t

[N₂] = 1.25 mol/L - 0.0019 mol/L.s × 44 s

[N₂] = 1.17 M

Answer:

predator

Explanation:

Wolves, arctic foxes, and snowy owls are predators in the tundra.

Answer:

An ionic bond is the electrostatic force that holds ions together when they form bonds

Explanation:

An ionic bond is formed when a metal looses electron(s) to a non metal leading to the formation of a positive ion and a negative ion.

An ionic compound is actually an ion pair, the ions are held together by strong electrostatic forces.

This strong electrostatic force that holds the ion pair together in ionic compounds is what we commonly call the IONIC BOND.  

Answer:

An ionic bond is the electrostatic force that holds ions together when they form bonds

Explanation:

I took this test and it was the correct answer :)

Answer:

The soil has a percentage of water by mass of 27.8 %.

Explanation:

Keeping in mind that

we can calculate the mass of water:

We can then calculate the mass percentage of water in the soil:

Answer:

Liquid

Explanation:

Answer:

Test it with a blue light that is 45 cm away.

Explanation:

Answer:

56 J

Explanation:

Step 1: Given data

Step 2: Calculate the work (w) done on the object

We can find the work done on the object using the following expression.

w = F × d × cosθ

where

θ is the angle between F and d

Since F and d occur in the same direction, θ = 0° and cosθ = 1. Then,

w = F × d × 1

w = F × d

w = 7 N × 8 m = 56 J

Answer:

5.78 × 10¹⁴ Hz

Explanation:

Step 1: Given and required data

Step 2: Convert "λ" to meters

We will use the conversion factor 1 m = 10⁹ nm.

519. nm × 1 m/10⁹ nm = 5.19 × 10⁻⁷ m

Step 3: Calculate the frecquency of this light

We will use the following expression.

c = λ × ν

ν = c/λ

ν = (3.00 × 10⁸ m/s)/5.19 × 10⁻⁷ m

ν = 5.78 × 10¹⁴ s⁻¹ = 5.78 × 10¹⁴ Hz

The percent composition of the compound.

A O-18.18%, N-21.21%, H-60.60%

Given

6.00 grams of oxygen,

7.00 grams of nitrogen,

20.00 grams of hydrogen.

Required

The percent composition

Solution

Total mass :

= mass of O + mass of N + mass of H

= 6 + 7 + 20

= 33 g

% O = 6/33 x 100%= 18.18%

% N = 7/33 x 100%=21.21%

% H = 20/33 x 100% = 60.6 %

Answer:

physical change

Explanation:

i got the same question sorry for the late response but that's the answer good luck

Answer:

See explanation and image attached

Explanation:

Often times, there is a need for a three dimensional representation of a molecule on paper. These three dimensional representations give us an idea of what the molecule really looks like if we were to be looking at it physically.

In order to make a three dimensional representation, we use wedged and dashed bonds. The wedged bonds are coming out of the plane of the paper towards you while the dashed bonds are going into the plane of the paper away from you.

In the image attached, you will find the three dimensional representation of the methane molecule.

Answer:

0.028 mole of ammonium phosphate, (NH₄)₃PO₄.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

H₃PO₄ + 3NH₃ —> (NH₄)₃PO₄

From the balanced equation above,

3 moles of NH₃ reacted to produce 1 mole of (NH₄)₃PO₄.

Finally, we shall determine the number of mole of (NH₄)₃PO₄ produced by the reaction of 0.085 mole of ammonia, NH₃. This can be obtained as follow:

From the balanced equation above,

3 moles of NH₃ reacted to produce 1 mole of (NH₄)₃PO₄.

Therefore, 0.085 mole of NH₃ will react to produce = (0.085 × 1)/3 = 0.028 mole of (NH₄)₃PO₄.

Thus, 0.028 mole of ammonium phosphate, (NH₄)₃PO₄ were obtained from the reaction.

Answer:

halogen.

nonmetal.

Explanation:

Answer:

Q =  57934.8 J

Explanation:

Given data:

Mass of water = 180.0 g

Initial temperature = 19°C

Fina temperature = 96°C

Specific heat capacity of water = 4.18 J/g.°C

Heat absorbed = ?

Solution:

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

ΔT = 96°C - 19°C

ΔT = 77°C

Q = 180.0 g×4.18 J/g.°C×77°C

Q =  57934.8 J

The  uncertainties  of  the  delta  measurements  and  the  uncertainty  of  the  atomic  weight  derivedfrom  the  best  measurement  of  isotopic  abundances  constrain  the  number  of  significant  figures  in  theatomic-weight values of the upper and lower bounds. For carbon, the fifth digit after the decimal pointis uncertain because of the uncertainty value of 0.000 027. Therefore, the number of significant digitsin the atomic-weight value is reduced to four figures after the decimal point. The Commission may rec-ommend  additional  conservatism  and  reduce  the  number  of  significant  figures  further.  For  the  lowerbound of carbon, 12.009 635 is truncated to 12.0096. For an upper bound, the trailing digit is increasedto ensure the atomic-weight interval encompasses the atomic-weight values of all normal materials. Inthe case of carbon, the upper bound is adjusted from 12.011 532 to 12.0116 to express four digits afterthe decimal point. The lower and upper bounds are evaluated so that the number of significant digits ineach  is  identical.  If  a  value  ends  with  a  zero,  it  may  need  to  be  included  in  the  value  to  express  therequired number of digits. The following are examples of lower and upper atomic-weight bounds foroxygen that could be published by the Commission in its various tables.

---------------------------

Extracted from" Atomic weights of the elements 2009 (IUPAC Technical Report)"

Answer:

The mass of a system does not change during a chemical reaction

Explanation:

Correct Answers

Answer:

Carbon and oxygen are chemically bonded in it.

Explanation:

The other answer choices do not apply for compounds, but rather for mixtures instead.

Answer:

A 400,000 kg object and a 100,000,000kg object

Explanation:

The objects with the most mass between them will have the greatest gravitational attraction.

This is why the last option is the right choice.

The reason for this is based on the Newton's law of universal gravitation which states that:

 "the gravitational force of attraction between two bodies is directly proportional to the product of their masses and inversely proportional to the square of the distance between them".

So, the more the mass, the greater the gravitational attraction between two bodies.

Answer: B

Explanation:

Answer:

This creates destructive interference.

Explanation:

When the two ends meet they will cancel each other out.

Both students are shaking the rope in the upward direction. Hence their crest will meet up and form the constructive  interference pattern. The intensity of the increases.

When two waves moves in phase, their crest or troughs add up and the amplitude of the wave increases. This phenomenon is called constructive interference.

If the two waves are passing out of phase to each other then they undergo destructive interference. The amplitude of the destructive interference pattern reduces from their initial values.

Here, both students are shaking the rope in the upward direction. Thus, they are in moving in phase. Hence their crest will meet up and form the constructive  interference pattern. The intensity of the increases.

Find more on interference?

https://brainly.com/question/16098226

#SPJ5

Answer:

b

Explanation: