A car moves 20 km towards the North and then 35 km at an angle of 60o towards west of North. Its magnitude of displacement from the initial position will be
Answer:
15
Explanation:
displacement = initial position - final position
what mean by expansion effect of heat
Answer:
Explanation:
-Cambio de temperatura
Al calentar un cuerpo la temperatura aumenta
Es el efecto más inmediato del calor, el aumento de la temperatura. Al calentar un cuerpo, es habitual, aunque no siempre, que el cuerpo aumente de temperatura. El aumento dependerá de la cantidad de calor que se suministra, del tipo de sustancia y de su cantidad.
-Dilatación
Cuando un objeto se calienta, su volumen aumenta. Este fenómeno se llama dilatación térmica. Por el contrario, cuando un objeto se enfría, su volumen disminuye, debido a la contracción térmica.
Cuando se calienta un cuerpo, además de cambiar de estado o variar su temperatura, también cambia su tamaño, se dilata.
Por ejemplo, los puentes no se construyen de una única pieza, sino que suelen presentar uno o varios cortes longitudinales, las llamadas juntas de dilatación. Si no existieran esas juntas, los cambios de longitud del puente entre el invierno y el verano o entre el día y la noche acabarían por romperlo.
La dilatación de un cuerpo dependerá del aumento de temperatura que experimente, de su tamaño y de la sustancia de que esté hecho. Cuanto más aumente la temperatura más aumentará su tamaño, lo mismo que cuanto mayor sea, mayor se hará.
Todos los cuerpos, ya sean sólidos, líquidos o gaseosos, varían su tamaño cuando intercambian calor con otro cuerpo.
-Cambios de estado:
Si una sustancia modifica el estado de sólido, líquido o gaseoso, se produce un cambio de estado. Un cambio de estado es una modificación en la forma en que se disponen las partículas que constituyen una sustancia.
El estado en que se encuentre un cuerpo depende de la presión a la que está sometido y de su temperatura. Para cambiar su estado se debe modificar alguna de estas variables, o ambas. Al elevar la temperatura de una sustancia sólida, aumenta la agitación de sus partículas.
Answer:
All forms of matter (solid, liquid and gas) undergo expansion on heating. When a solid is heated, the atoms gain energy and vibrate more vigorously. This results in the expansion of the solid. For a given change in temperature, the extent of expansion is smaller in solids than in liquids and gases. This is due to the rigid nature of solids.
Explanation:
The primary circuit of a transformer has a voltage of 80 V and 300 windings. The secondary circuit has a voltage of 240. How many windings are there in the secondary circuit? *
Answer:
900 windings
Explanation:
Applying,
Vs/Vp = Ns/Np............. Equation 1
Where Vs = Secondary voltage, Vp = primary voltage, Ns = Number of turns in the secondary circuit, Np = number of turns in the primary circuit
make Ns the subject of the equation
Ns = VsNp/Vp........... Equation 2
From the question,
Given: Vs = 240 V, Np = 300 windings, Vp = 80 V
Substitute these values into equation 2
Ns = (240×300)/80
Ns = 900 windings
Cual es el deporte que le da fortaleza y flexibilidad al cuerpo
Answer:
Aesthetic sports
Explanation:
Aesthetic sports are the one's that need well-developed physical qualities such as strength, agility, stamina, flexibility, and technical knowledge and artistry, in addition to technical ability and artistry. Elite athletes in these sports generally have a low abdominal fat , and the ranking is subjective.
In aesthetic sports like gymnastics, swimming, and figure skaters, dynamic and proactive flexibility is required.
what is the effect of pressure on boiling and melting substance?
Answer:
The boiling point of liquids always increases when pressure is applied on a liquid. This is because the molecules of a liquid will need more energy to turn into a gaseous state when pressure is applied on that substance.
health ,population and environment education is for the enrichment of quality of life,justify the statement
Answer:
hey !! here is a short and sweet answer to your question
=quality of life is directly determined by health ,education ,and life expectacy
=health Is a type of thing that gives employment to the person working in firm
hope u understand
Explanation:
To make a position-time graph, you plot position relative to the starting point on the y-axis against the corresponding_______on the x-axis
Answer:
time.
Explanation:
Motion can be defined as a change in the location (position) of a physical object or body with respect to a reference point.
This ultimately implies that, motion would occur as a result of a change in location (position) of an object with respect to a reference point or frame of reference i.e where it was standing before the effect of an external force.
A reference point refers to a location or physical object from which the motion (movement) of another physical object or body can be determined.
Mathematically, the motion of an object is described in terms of acceleration, time, distance, speed, velocity, position, displacement, etc.
A graph can be defined as the graphical representation of data (informations) on horizontal and vertical lines i.e x-axis and y-axis respectively.
A position-time (x-t) graph is a graph of the position of an object against (versus) time.
To make a position-time graph, you should plot the values of the position of an object or body with respect to the starting point on the y-axis against the corresponding time on the x-axis.
Generally, the slope of the line of a position-time (x-t) graph is typically used to determine or calculate the velocity of an object.
An instantaneous velocity can be defined as the rate of change in position of an object in motion for a short-specified interval of time. Thus, an instantaneous velocity is a quantity that can be found by measuring the slope of a line that is tangent to a point on the graph.
In conclusion, the x - t graph also referred to as the position-time graph is used for determining the instantaneous velocity from the slope.
If the density of a substance is 5g/cm3 and the volume is 10cm3,
determine the mass.
Answer:
(5g/cm³)*(10cm³) = 50g
Explanation:
This is just a conversion formula. Easy to find using dimensional analysis.
(5g/cm³)*(10cm³) = 50g
Answer:
[tex]\boxed {\boxed {\sf 50 \ grams}}[/tex]
Explanation:
Density is the amount of mass per unit volume, so the formula is:
[tex]d = \frac{m}{v}[/tex]
The density of the substance is 5 grams per cubic centimeter and the volume is 10 cubic centimeters.
d= 5 g/cm³ v= 10 cm³Substitute the values into the formula.
[tex]5 g/cm^3 = \frac{m}{10 \ cm^3}[/tex]
We are solving for the mass, so we have to isolate the variable m. It is being divided by 10 cubic centimeters. The inverse of division is multiplication, so we multiply both sides of the equation by 10 cm³.
[tex]10 \ cm^3 *5 g/cm^3 = \frac{m}{10 \ cm^3} * 10 \ cm^3[/tex]
[tex]10 \ cm^3 *5 g/cm^3 = m[/tex]
The units of cubic centimeters (cm³) cancel.
[tex]10 *5 g = m[/tex]
[tex]50 \ g=m[/tex]
The mass of the substance is 50 grams.
Magnetic force between the north poles of two magnets is
Magnetic force between the north poles of two magnets is REPULSIVE
Answer:Repulsion or attraction
Explanation:The angle between the compass needle and geographic north is called the MAGNETIC DECLINATION.(see earth:the magnetic field of the earth ). The repulsion or attraction between two magnetic dipoles can be viewed as the interaction of one dipole with the magnetic field produced by other dipole.
A blue line with 5 orange tick marks then one red tick mark then 4 orange tick marks. The number zero is above the red tick mark.Assume each tick mark represents 1 cm.Calculate the total displacement from 0 if an object moves 3 cm to the left, then 7 cm to the right, and then 6 cm to the left.The object moves cm to the left.What is the total distance the object travels? cm
Answer:
16 cm
Explanation:
Given that,
The object begins from 0 and moves 3cm towards left side followed by 7 cm towards the right and then, 6 cm towards the left side.
Let the x-axis to be the +ve and on the right side and -ve on the left
Thus, displacement would be:
= 0 -3 + 7 -6
= -2 cm
This implies that the object displaces 2cm towards the left.
While the total distance covered by the object equal to,
= 0cm + 3cm + 7cm + 6cm
= 16 cm
Thus, 16 cm is the total distance.
Answer:
Its 2 to the right
Explanation:
edge :p
In a given chemical reaction the energy of the products is less than the energy of the reactants which statement is true for this chemical reaction
Group of answer choices.
A. Energy is absorbed in the reaction.
B. Energy is released in the reaction.
C. There is no transfer of energy in the reaction.
D. Energy is lost in the reaction.
Answer:
B. Energy is released in the reaction.
Explanation:
A chemical reaction can be defined as a chemical process which typically involves the transformation or rearrangement of the atomic, ionic or molecular structure of an element through the breakdown and formation of chemical bonds to produce a new compound or substance.
Basically, there are two (2) main types of chemical reaction and these include;
I. Endothermic reaction: it's a chemical reaction in which heat is absorbed
II. Exothermic reaction: it's a chemical reaction in which heat is liberated into the environment.
In Chemistry, all chemical equation must follow or be in accordance with the Law of Conservation of Mass, which states that mass can neither be created nor destroyed by either a physical transformation or a chemical reaction but transformed from one form to another in an isolated (closed) system.
Generally, energy is released in a chemical reaction when the energy of the products is less than the energy of the reactants and it is referred to as an exothermic reaction.
However, when the energy of the products is greater than the energy of the reactants, energy is absorbed and it is referred to as an endothermic reaction.
The Indianapolis speedway consists of a 2.5 mile track having four turns, each 0.25 mile long and banked at 9 12'
Answer: Your question is missing below is the question
Question : What is the no-friction needed speed (in m/s ) for these turns?
answer:
20.1 m/s
Explanation:
2.5 mile track
number of turns = 4
length of each turn = 0.25 mile
banked at 9 12'
Determine the no-friction needed speed
First step : calculate the value of R
2πR / 4 = πR / 2
note : πR / 2 = 0.25 mile
∴ R = ( 0.25 * 2 ) / π
= 0.159 mile ≈ 256 m
Finally no-friction needed speed
tan θ = v^2 / gR
∴ v^2 = gR * tan θ
v = √9.81 * 256 * tan(9.2°) = 20.1 m/s
why physics ought to be studied?
Answer:
The goal of physics is to understand how things work from first principles. ... Courses in physics reveal the mathematical beauty of the universe at scales ranging from subatomic to cosmological. Studying physics strengthens quantitative reasoning and problem solving skills that are valuable in areas beyond physics.
Your new motorcycle weighs 2450 N.
What is
its mass in kilograms?
i understand the answer is 250kg because mass times gravity thing but why isn’t the answer negative cause gravity pulls down so wouldn’t be Negative answer not a positive answer
i was taught FW is always negative why isn’t it negative here
Answer:
Explanation:
The negative only matters reallly if you are dealing with a 2d system. I could even define down as positive and up as negative. However, usually you are taught that down is negative. It really doesn't matter because a force is a force. It is only given a direction relative to another force or vector direction.
What is physical measurement? in Science
Answer:
physical measurement comprises the measurement of objects, things, etc. and is concerned with the measurement of height, weight, length, size, volume etc.
1. Determine the magnitude of two equal but opposite charges if they attract one another with a force of 0.7N when at distance of 0.3m apart in a vacuum.
Answer:
q = 2.65 10⁻⁶ C
Explanation:
For this exercise we use Coulomb's law
F =[tex]k \frac{q_1q_2}{r^2}[/tex]
In this case they indicate that the load is of equal magnitude
q₁ = q₂ = q
the force is attractive because the signs of the charges are opposite
F = [tex]k \ \frac{q^2}{r^2}[/tex]
q = [tex]\sqrt{\frac{F \ r^2}{k} }[/tex]
we calculate
q = [tex]\sqrt{\frac{0.7 \ 0.3^2 }{9 \ 10^9} }[/tex]
q = [tex]\sqrt{7 \ 10^{-12} }[/tex]Ra 7 10-12
q = 2.65 10⁻⁶ C
If a lawn mower is pushed with a distance of 30 meters and 12N-m of work is exerted, calculate the force.
Answer:
Explanation:
W = FΔx so filling in:
12 = F(30) so
F = .4N
A 0.080-kg egg test dummy is fitted with a helmet and attached to a swing. This egg test dummy is pulled back and released, allowing it to collide with a cement block. The impulse on the egg test dummy is - 0.39N.s is over an interval of 0.050 s. What is the magnitude of the force on the egg test dummy during this time interval?
Answer:
7.8 N
Explanation:
Applying,
I = Ft................. Eqaution 1
Where I = Impulse on the egg test dummy, F = Force on the egg test dummy during the time interval, t = time interval
make F the subject of the equation
F = I/t.................. Equation 2
From the question,
Given: T = -0.39 N.s, t = 0.050 s
Substitute these vales into equation 2
F = -0.39/0.050
F = -7.8 N
Hence the force that act on the egg test dummy is 7.8 N
A basketball is shot by a player at a height of 2.0 m. The initial angle
was 53° above horizontal. At the highest point the ball was travelling 6
m/s. If he scored (the ball went through the rim that is 3.00 m above the
ground), what was the player’s horizontal distance from the basket?
Answer:
The answer is "8.28 m".
Explanation:
[tex]\to u \cos 53^{\circ}=6 \ \text{therefore the horizontal velocity is constant alaways}\\\\\therefore[/tex]
[tex]u= \frac{6 \times 5}{3}= \frac{30}{3}= 10\ \frac{m}{s}\\\\[/tex]
In the projectfile when vertical displacement is 1 then 5 m comes at farther sides
Using
[tex]S=ut-\frac{1}{2} gt^2\\\\1=u\sin 53^{\circ}\times t-5t^2\\\\1=8t-5t^2\\\\5t^2-8t+1=0\\\\ t=\frac{8\pm \sqrt{64-20}}{10} \\\\=\frac{8\pm 2\sqrt{11}}{10} \\\\t_2=\frac{8+2\sqrt{11}}{10} \\\\[/tex]
[tex]Distance=u \cos 53^{\circ}\times t_2\\\\[/tex]
[tex]=6 \times \frac{8\pm 2\sqrt{11}}{10} \\\\=\frac{24\pm 6\sqrt{11}}{5} \\\\= 8.28 \ m[/tex]
How would you find the resistance of a parallel circuit with n identical resistors?
9514 1404 393
Answer:
R/n
Explanation:
For a given voltage V across each resistor R, the current is V/R. Since there are n parallel paths, the total current is n(V/R). The effective resistance is ...
Reff = V/I = V/(nV/R)
Reff = R/n
Describe the advantages and disadvantage is of living in a floodplain
Answer:
:) :::::::::::::::::::::::::::::::))))
Mike lives in the northern United States minnesota and nick lives in the southern United States Louisiana. When they both feel insulted by the same individual, nick will be more
Complete question is;
Mike lives in the northern United States (in Minnesota) and Nick lives in the southern United States (Louisiana). When they both feel insulted by the same individual, Nick will be more likely to have a(n) ________ cortisol response and show ________ levels of physical aggression.
Answer:
- A hyper cortisol response
- higher levels of physical aggression
Explanation:
In study of hormones in the human body, it has been discovered that cortisol is a stress inducing hormone. Now, if they are in the summer when it is hot, it has been proven that's when the cortisol hormone circulates in a very large manner in the blood. This leads to frustration and as well possibly physical aggression.
Nick will be more likely to have a(n) hyper cortisol response and show higher levels of physical aggression.
What is cortisol?Cortisol has been identified as a stress-inducing hormone in studies of hormones in the human body.
Mike lives in the northern United States (in Minnesota) and Nick lives in the southern United States (Louisiana).
When they both feel insulted by the same individual, Nick will be more likely to have a(n) hyper cortisol response and show higher levels of physical aggression.
Cushing syndrome is a condition characterized by elevated cortisol levels. This disorder is caused by your body producing too much cortisol.
Similar symptoms can occur after large doses of corticosteroids, thus this should be cleared out before testing for crushing syndrome.
Cortisol has been identified as a stress-inducing hormone in studies of hormones in the human body. Now, if they are in the summer when it is hot.
It has been proved that the cortisol hormone circulates in the blood in a very significant amount. This causes irritation and, in some cases, physical aggressiveness.
Hence nick will be more likely to have a(n) hyper cortisol response and show higher levels of physical aggression.
To learn more about cortisol refer to the link
https://brainly.com/question/7519944
I have possess'd your grace of what I purpose:And by our holy Sabbath have I swornTo have the due and forfeit of my bond.If you deny it, let the danger lightUpon your charter and your city's freedom !You'll ask me, why I rather choose to haveA weight of carrion flesh than to receiveThree thousand ducats : I'll not answer that:But, say, it is my humour(1) Whom are these lines addressed to? What is the context in which theselines are spoken?(ii) What has Shylock sworn on oath ?
Answer:
1. These lines are addressed to Duke.
2. These lines show that Shylock is not willing to forgive the debt a merchant owes him, nor is he willing to justify why he demands that debt be paid, even if it seems cruel.
3. He swore by the Holy Sabbath, which is a holy day for him, who is a Jew. He swore he would get the debt money or a piece of the debtor's flesh.
Explanation:
The lines shown in the question above refer to "The Merchant of Venice" written by Shakespeare. In this story we are introduced to Antonio, a commercial who is very prejudiced against Jews, but when he needs money, he borrows from another merchant, Shylock, who is Jewish. Shylock agrees to lend money to Antonio, but determines the date that this money must be returned, in addition, Shylock states that he will lend the money if Antonio agrees that if this money is not paid by the specified date, Antonio will have to pay with half a kilo of flesh from his own body. Antonio agrees, but doesn't pay the money so Shylock goes after the flesh of Antonio's body and Duke tries to intervene because he thinks this is too cruel. At this point, Shylock speaks the lines shown in the question above, showing that he is not willing to change his mind.
Một con lắc là xo treo thẳng đứng có độ cứng 30 N/m và vật nặng có khối lượng 320 g. Kích thích dễ cho quá nặng dao động điều hoà theo phương thẳng đứng xung quanh vị trí cân bằng với biên độ 6 cm. Lấy g = 10m/s. Độ lớn lực kéo lớn nhất của là xa liễn điểm treo trong quá trình quả nặng dao động là
Answer:
The maximum force is 1.8 N.
Explanation:
A pendulum is a vertically hanging spring with a stiffness of 30 N/m and a mass of 320 g. The excitable excitation oscillates vertically around the equilibrium position with an amplitude of 6 cm. Take g = 10m/s. The magnitude of the maximum pulling force of the distance from the suspension point during the oscillation of the weight is
stiffness, K = 30 n/m
mass, m = 320 g
amplitude, A = 6 cm = 0.06 m
g = 10 m/s^2
Let the maximum acceleration is a.
[tex]a = w^2 A\\\\a = \frac{K}{m}A\\\\Force, F = m a \\\\F = K A\\\\F = 30 \times 0.06 \\\\F = 1.8 N[/tex]
An image of a car with height of 14 cm occurred in the mirror which is located at a T-
intersection. If the car height is 140 cm and the radius of the curvature of the mirror is 60 cm,
how far is the car from the mirror?
helpp me!!!!!!
Answer:
The distance of car form the mirror is 330 cm.
Explanation:
height of object, h = 140 cm
height of image, h' = 14 cm
radius of curvature, R = 60 cm
focal length, f = R/2 = + 30 cm
Let the distance of image is v and the distance of object is u.
[tex]\frac{h'}{h}\frac{v}{u}\\\\\frac{14}{140} =\frac{v}{u}\\\\v =\frac{u}{10}[/tex]
Use the formula of focal length
[tex]\frac{1}{f}=\frac{1}{v}+\frac{1}{u}\\\\\frac{1}{30}=\frac{10}{u}+\frac{1}{u}\\\\\frac{1}{30}=\frac{11}{u}\\\\u = 330 cm[/tex]
My second question for today :
Why do we ever have a blood moon?? What's the science behind it
Answer:
vhijko and eye rudiieidjdjddjjd
Explanation:
jdjdjdjdjfjofkd ruudoeksowkosksd and nkdeondjvndkxnfuvjfk
A wire, 20m long, is heated from a temperature of 5°C to 55°C. If the change in length is 0.020m, calculate the linear expansivity of the wire.
Answer:
0.01998⁰C;¹
Explanation:
you can see all steps in photo
is the answer correct or wrong
Answer:
wrong answer because m=100
Explanation:
I think it is incorrect
Ah, I tried
why solid keep their shape?
Answer:
Solids can hold their shape because their molecules are tightly packed together. ... Atoms and molecules in liquids and gases are bouncing and floating around, free to move where they want. The molecules in a solid are stuck in a specific structure or arrangement of atoms
Hope this helps ☆*:. o(≧▽≦)o .:*☆
A small emergency generator supplies 432 000 000 J of electrical energy in twenty-four hours. What is the average power output of the generator?
Answer:
P = 5 kW
Explanation:
Given that,
Electrical energy = 432 000 000 J
Time, t = 24 h = 86400 s
We need to find the power output of the generator. We know that,
Power = work done/time
So,
[tex]P=\dfrac{432 000 000}{86400}\\\\P=5000\ W[/tex]
or
P = 5 kW
So, the power output of the generator is 5 kW.