Please help 15 points
What is the change in electrons for nitrogen in the
following reaction?
S + NO3 --> SO2 + NO

Answer:

2,3 Dimethyl hexane

Explanation:

First, start the count from which side is given the CH3 smallest number

first; the longest carbon chain in this compound is 6

and you don't have any double and triple bonds or functional groups so it is Hexane

you start to count from the right side to give the branch molecules the smallest number ..

CH3 = methyl

and you have 2 methyl in this compound ..

and 2 mean you must write ( Di )

you write the name in this way

2,3 Dimethyl hexane

hope this helps you.

stay safe ...

Answer:

V₂ = 0.154 Liters

Explanation:

Pressure => P

Volume   => V

Temperature => T

mass (moles) => n

This problem...

P₁ = 1.00 ATM     P₂ = 3.25 ATM

V₁ = 0.500L       V₂ = ?

T₁ =  constant    T₂ = T₁ = constant

n₁ =  constant     n₂= n₁ = constant

P₁V₁/n₁T₁ = P₂V₂/n₂T₂  => V₂ = V₁(P₁/P₂) = 0.500L (1.00ATM/3.25ATM) = 0.154 Liters

Answer:

18.82 mg

Explanation:

From the given information:

The molar mass of CO2  is calculated as follow

= (12 + (16 ×2))

= 44

The mass of carbon is determined by dividing the mass no of carbon from co2 by the molar mass of CO2,  followed by multiplying it by 69.00 mg

= [tex](\dfrac{12}{44}\times 69 )[/tex]

=(0.2727 × 69 )

= 18.82 mg

Answer: Options related to your question is missing below are the missing options

a. cytochrome c is a one-electron acceptor, whereas QH2 is a two-electron donor.

b. cytochrome c is a two-electron acceptor, whereas QH2 is a one-electron donor.

c. cytochrome c is water soluble and operates between the inner and outer mitochondrial membranes

d. heart muscle has a high rate of oxidative metabolism, and therefore requires twice as much cytochrome c as QH2 for electron transfer to proceed normally.

e. two molecules of cytochrome c must first combine physically before they are catalytically active.

answer:

cytochrome c is a one-electron acceptor, whereas QH2 is a two-electron donor. ( A )

Explanation:

The overall stoichiometry of the reaction requires 2 mol of cytochrome per mole of QH2 because a cytochrome is simply a one-electron acceptor while QH2 is not a one-electron donor ( i.e. it is a two-electron donor )

An electron donor in a reaction is considered a reducing agent because it donates its electrons to another compound thereby self oxidizing itself in the process.

Answer:

Vanlency of hydrogen - 11

Electrons of hydrogen - 1

Answer:

The answer is: 1

Hope this helps :) <3

Explanation:

Answer:

Pure water has an acidity of about 7 on the pH scale. -is a chemical property of pure water. Pure water has an acidity of about 7 on the pH scale

Answer: không màu , không mùi không vị

Explanation:

After the double replacement reaction is complete 0 grams of BaCl₂ and 31.16 grams of H₂SO₄ will remain.

First, we will write the balanced equation for the reaction

H₂SO₄ + BaCl₂  → BaSO₄ + 2HCl

This means 1 mole of BaCl₂ is needed to react completely with 1 mole of H₂SO₄ to give 1 mole of BaSO₄ and 2 moles of HCl

From the question, 50.0g of sulfuric acid is mixed with 40.0 grams of barium chloride. To determine the quantity of each substance remaining after the complete reaction, we will first determine the number of moles present in each of the reactant.

For H₂SO₄

mass = 50.0g

Molar mass = 98.079 g/mol

From the formula

Number of moles = Mass / Molar mass

∴ Number of moles of H₂SO₄ = 50.0g / 98.079 g/mol

Number of moles of H₂SO₄ = 0.5098 mol

For BaCl₂

mass = 40.0 g

Molar mass = 208.23 g/mol

∴ Number of moles of BaCl₂ = 40.0g / 208.23 g/mol

Number of moles of BaCl₂ = 0.1921 mol

Since the number of moles of H₂SO₄ is more than that of BaCl₂, then H₂SO₄ is the excess reagent and BaCl₂ is the limiting reagent (that is, it will be used up completely during the reaction)

From the equation, 1 mole of H₂SO₄ is needed to completely react with 1 mole of BaCl₂

∴ 0.1921 mol of H₂SO₄ will be needed to completely react with 0.1921 mol of BaCl₂.

Therefore, after the reaction is complete, 0 mole (i.e 0 grams) of BaCl₂ will remain and (0.5098 mole - 0.1921 mole) of H₂SO₄ will remain.

Number of moles H₂SO₄ that will remain = 0.5098 mole - 0.1921 mole = 0.3177 moles

Now, we will convert this to grams

From the formula

Mass = Number of moles × Molar mass

Mass of H₂SO₄ that will remain = 0.3177 moles × 98.079 g/mol

Mass of H₂SO₄ that will remain = 31.1597 g

Mass of H₂SO₄ that will remain ≅ 31.16 g

Hence, after the double replacement reaction is complete 0 grams of BaCl₂ and 31.16 grams of H₂SO₄ will remain.

Learn more here: https://brainly.com/question/6857557

Dynamic equilibrium is showed at the point at which solid liquid and gas intersect.

At the point at which solid liquid and gas intersect represents a system that shows dynamic equilibrium. There is equal amount of reactants and products at the point of dynamic equilibrium because the transition of substances occur between the reactants and products at equal rates, means that there is no net change. Reactants and products are formed at the rate that no change occur in their concentration.

https://brainly.com/question/24310467

Answer:

Following are the response to the given question:

Explanation:

In the given scenario, When the balance has never been tainted before the KHP is weighted, which can affect the molar concentration of NaOH because its molarity is directly proportional to the weight including its substance. In this question it is the mistake is systemic because it may be corrected by modifying balancing parameters.

Answer:

Explanation:

H = 0.44/1.01 = 0.4356

O = 6.92/16 = 0.4319

This gives a 1:1 ratio. So the closest thing you could say is the formula is 0H

Going to your chemical storage room, you could justify that it is H2O2 or hydrogen peroxide. The question needs one more fact to make the answer certainty.

Answer: 8 for both

Explanation:

Answer: See explanation

Explanation:

The calibration curve is the method used for the determination of the concentration of a substance such that the unknown sample will be compared to some standard samples of the known concentration.

To prepare a standard (calibration) curve for a spectroscopy experiment, start by preparing (multiple solutions) with (different known concentrations). Then, measure the (absorbance) of each solution at (thesame wavelength) and create a plot of (absorbance vs. concentration) for the measured values. Finally, find the best-fit line of the data set.

Answer:

0.0365 is your answer

Explanation:

Answer:

365.2gㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤ

Answer:

65.5J

Explanation:

ML=Q

ML=MC(change in temperature)

0.75 X 23000 =0.75 X 351 X C

C= 65.5J

The energy supplied to the lead to melt from 21°c to its melting point is 51521 Joules.

Specific heat is the amount of heat energy supplied to change the temperature of one unit mass of a substance by 1 °C. The SI unit of the specific heat capacity of a substance is J/Kg.

The mathematical expression for the specific heat capacity can be written as:

Q = mCΔT      Where C is the specific heat of the substance.

The specific heat capacity depends upon the starting temperature and is an intensive characteristic of the material.

Given, the melting point of the lead T₂ = 327.5° C

The initial temperature of the lead, T₁ = 21° C

The latent heat of the lead given, L = 230000 J/Kg K

The specific heat of the lead, C = 130 J/Kg K

The heat required to melt the lead from 12°C to 327.5 °C is :

Q = m× [C × (T₂ - T₁) + L ]

Q = 0.75 × [0.130 (327.5 - 21)  + 23000]

Q = 51521 J

Learn more about specific heat, here:

brainly.com/question/11297584

#SPJ5

Answer:

boiling point is the physial property of matter

The option that is showing the physical property of the matter is boiling point, the correct option is C.

A physical property is any measurable property whose value describes the state of a physical system.

Changes in a system's physical properties can be used to describe its transitions between momentary states. Physical properties are also known as observables. They do not have modal properties.

Physical properties include color, phase, odor, and boiling point. Since reactivity with oxygen is dependent on the chemical nature of the object, it is not a physical property.

A compound's physical property is one that can be observed and measured. The chemical composition of a compound is unaffected by a physical property.

Thus, the correct option is C.

For more details regarding physical property, visit:

https://brainly.com/question/18327661

#SPJ6

Answer:

a)  [tex]V_1=5ul[/tex]

b)  [tex]v=20ul[/tex]

Explanation:

From the question we are told that:

initial Concentration [tex]C_1=50mg/ml[/tex]

Final Concentration [tex]C_2=10mg/ml[/tex]

Final volume needs [tex]V_2 =25ul[/tex]

Generally the equation for Volume is mathematically given by

[tex]C_1V_1=C_2V_2[/tex]

[tex]V_1=\frac{C_1V_1}{C_2}[/tex]

[tex]V_1=\frac{10*25}{50}[/tex]

[tex]V_1=5ul[/tex]

Therefore

The volume of buffer needed is

[tex]v=V_2-V_1\\\\v=25-5[/tex]

[tex]v=20ul[/tex]

Answer:

I say Star S has radial motion

Explanation:

I'm not sure if it right but let me know if you have any other questions

Answer:

The median is also the number that is halfway into the set. To find the median, the data should be arranged in order from least to greatest. If there is an even number of items in the data set, then the median is found by taking the mean (average) of the two middlemost numbers.

I hope it helps

Answer:

Option B: as the distance between the objects increases the Force of gravity decreases

Answer:

25.88 g/mol

Explanation:

Graham's law is a famous law which states that the diffusion rate or the effusion rate of any gas varies inversely to the square root of the molecular weight the gas.

So from Graham's law, we have,

[tex]$\frac{\text{time}}{M^{1/2}}=\text{constant}$[/tex]

Using the sample of Kr gas having M = 83.8

[tex]$\frac{8.15}{(83.8)^{0.5}}= \frac{4.53}{M^{0.5}}$[/tex]

[tex]$M^{0.5}= 5.088$[/tex]

M = 25.88 g/mol

Answer:

Biolage is the answer

Explanation:

Because it's price is third most

Answer:

liquid will be evaporated while solid remains

Answer:

Explanation:

We are to match each land resource to what they are being used for.

Clay             →→→  used to make pottery and tiles

iron ore       →→→  used to make steel

Salt              →→→   used as a flavoring in food

aggregate   →→→   used in construction

graphite       →→→ used to make batteries

Clay is a kind of soil particle that forms as a result of weathering processes. Examples include; pottery clays, glacial clays, and deep-sea clays e.t.c. The presence of one or more clay minerals, as well as variable quantities of organic and detrital components, characterizes all of them. Clay is usually sticky and moist when wet, but hard when dry. They are used in the making of tiles and potteries.

Iron ore:  The iron ore deposits are found in the Earth's crust's sedimentary rocks. They're made up of iron and oxygen that mix during the chemical process in marine and freshwater. iron ores are used to produce almost every iron and steel product that we use today.

Aggregate: are utilized in construction activities. It is a material used to mix cement, gypsum, bitumen, or lime to produce concrete in the construction industry.

Graphite: Graphite is a mineral that occurs in both igneous and metamorphic rocks. It is generally generated on the earth's surface when carbon is exposed to high temperatures and pressures. It is mainly used in the production of batteries and electrodes,

Answer:

c. 2,2-dichloropentane.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to firstly draw the structure of the reactant, pent-1-yne:

[tex]CH\equiv C-CH_2-CH_2-CH_2[/tex]

Now, we infer the halogen is added to the carbon atom with the most carbon atoms next to it, in this case, carbon #2, in order to write the following product:

[tex]CH\equiv C-CH_2-CH_2-CH_2+2HCl\rightarrow CH_3- CCl_2-CH_2-CH_2-CH_2[/tex]

Whose name is 2,2-dichloropentane.

Regards!

The Adsorbent is used as part of the stationary phase and has an affinity for the solvent and the chemical components of the mixture.

The adsorbent has a high affinity for solvent and the chemical components of the mixture.

Chromatography is a method of separation in which the mixture of substances is introduced into a mobile phase (solvent). The separation occurs as the solvent interacts with an adsorbent(stationary phase).

The extent of separation of the components of the mixture depends on the extent of interaction between the mobile and the stationary phase . This interaction also determines the retention factor (Rf) of the separation.

For a definition of chromatography, see

https://brainly.com/question/19334271

There are various variants of Cov id virus. The Brazilian variant P also known as Gamma variant is the third variant of the original SARS-CoV2.

The correct answer is more negative

This variant has raised concerns since it has ability to spread more quickly then previous variants and this is more negative variant.

It is assumed that Cov id variant Gamma and Delta has ability to absorb move UV light but this is not proved yet and research is underway.

Learn more at https://brainly.com/question/24319270

Answer:

a. -58 millivolts

Explanation:

The given Nernst equation is:

[tex]E_{ion} = 58 millivolts /z \Big[ log_{10} \Big( \dfrac{[ion]_{out}}{[ion]_{in}}\Big) \Big]}[/tex]

The equilibrium potential given by the Nernst equation can be determined by using the formula:

[tex]E_{Cl^-} = \dfrac{2.303*R*T}{ZF} \times log \dfrac{[Cl^-]_{out}} {[Cl^-]_{in}}[/tex]

where:

gas constant(R) = 8.314 J/K/mol

Temperature (T) = (20+273)K

= 298K

Faraday constant F = 96485 C/mol

Number of electron on Cl = -1

[tex]E_{Cl^-} = \dfrac{2.303*8.314*298} {(-1)*(96845)} \times log \dfrac{100} {10}[/tex]

[tex]E_{Cl^-} = - 0.05814 \ volts[/tex]

[tex]\mathsf{E_{Cl^-} = - 0.05814 \times 1000 \ milli volts}[/tex]

[tex]\mathsf{E_{Cl^-} \simeq - 58\ milli volts}[/tex]

Answer:

Neither Tech A nor B is correct

Explanation:

Combustion is a chemical reaction that occurs when a chemical molecule(s) interacts quickly with oxygen and produces heat.

When hydrocarbon undergoes a complete combustion reaction, they produce water and CO2.

Tech B is also incorrect because the main purpose of a catalytic converter is to accelerate and speed up the chemical reaction rates, Hence, they are not involved in chemical reaction formation. Catalytic converters are utilized as a control device in exhaust emission to lessen the effect of toxic gas fumes.